Used C.ehrenspeger Ag Flux for sale (6,633)

Condition: used, Year of construction: 2015, functionality: unexamined, For sale is a well-maintained screw conveyor pump. It was used intermittently over several years in conjunction with a chain hoist. Includes a frequency converter. These pieces of equipment were disassembled in 2024 due to a relocation at the old site and have not been used since. The pump can be connected to power and its functionality can be checked. Inspection is possible at our location in Zurich. Todpjz Hm Trsfx Aa Iec

Year of construction: 2019, operating hours: 5,000 h, condition: used, functionality: fully functional, machine/vehicle number: F55 SV 078M, Oven - Manufacturer: Themor Flux - Model: F 55 - Hot air wood-burning stove - Year of manufacture/purchase: 2019 - Used sparingly - Well-maintained condition - Ideal for heating larger rooms, workshops, halls or similar buildings Döring stainless steel chimney - Manufacturer: Döring - Double-walled stainless steel system - Diameter: approx. 160 mm - Total installed height to date: approx. 10.60 m Tedpszxw Dbsfx Aa Iec - Several 1-meter pipe extensions available - Including inspection/cleaning element - Including connection/T-piece - Numerous matching wall brackets and connecting clamps - Additional available mounting material will be included - The chimney was mounted on a building and can be reused accordingly

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Tsdjxlub Dspfx Aa Iec

Condition: used, Year of construction: 2006, number of axes: 3, working width: 1,250 mm, working length: 3,100 mm, TECHNICAL DETAILS Working area, X-axis: 3,100 mm Working area, Y-axis: 1,250 mm Max. panel thickness: 85 mm Number of controlled axes: 3 Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-direction: 2 Tedpsz En Afjfx Aa Ioc Horizontal drilling spindles, Y-direction: 2 Total number of vertical and horizontal drilling spindles: 11 Milling unit Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 9 kW Automatic tool changer: yes Grooving unit Number of grooving units: 1 Position of grooving unit: top Swivel positions: 0° / 90° Number of tool magazines: 1 Tool positions: 8 Position of tool magazine: machine side Number of work tables: 1 Table width: 3,100 mm Table length: 1,250 mm Table material: phenolic resin MACHINE DETAILS Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h Control system: PC Control Programming software: WoodWOP 5.0 EQUIPMENT Flat table design Nesting work table Vacuum pump Automatic tool changer Tool magazine positioned on the side Safety light barriers CE marking The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6279

Year of construction: 2023, condition: like new (used), functionality: fully functional, ESCO Airstream Gen 3 Vertical Laminar Flow Cabinet Type: LVG-3AG-F8 Tedpfxez D Tkfs Aa Iec Airstream Gen 3 Vertical Laminar Flow Cabinet While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet. The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream Gen 3 Vertical Laminar Flow Cabinet. Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: REMUND AG (Switzerland) Type: Vacuum packaging machine Capacity: 1–4 bags/cycle Year of manufacture: 2002 Workstations: 2 Tjdpfx Aez Hdbtea Ioc Products: Cheese, meat, and other large-format food products Equipped with modified atmosphere packaging (MAP) PLC: Siemens S7 Condition: very good and fully functional

Condition: as good as new (ex-display), Diaphragm pump, FLUX air-operated diaphragm pump – 8 bar,Membrane pump, New condition (without warranty) Manufacturer: FLUX - GERÄTE GMBH (Made in Germany) Type: FDM 25 S/TT Serial number / Part number: 15663 Max. flow rate: 150 – 175 l/min Max. operating pressure (PN max): 8 bar Housing material: Stainless steel (S) Diaphragm / Seal material: PTFE / Teflon (TT) Connection size: 1" (DN 25) Tedjzrm Aajpfx Aa Ijc

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Todpfx Aez D Ifqja Iec Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: good (used), Flux F560-S3 high viscosity pump Tjdpfeqqht Rox Aa Ijc Sanitary high viscosity pump, on mobile skid

Year of construction: 2019, condition: ready for operation (used), Plate processing center manufactured in 2019. This Behringer MAG EVO 420 is suitable for drilling, tapping, marking, milling, and plasma cutting of flat steel and sheet metal. It features a roller conveyor for sheets up to 4000 x 2000 mm and an automatic turret tool changer with 14 tool positions. If you are looking to get high-quality plate processing capabilities, consider the Behringer MAG EVO 420 machine we have for sale. Contact us for further details. - Infeed System: Roller conveyor for flat steel/plates up to 4000 x 2000 mm with zero-position transverse conveyors, NC feed carriage, and retractable clamps- Outfeed System: Outfeed roller conveyor with lowerable discharge table and chute into material collection container for small parts- Drilling Unit Drive Power: 16 kW- Spindle Speed: 160 to 4000 RPM- Tool Changer: Automatic turret tool changer with 14 tool positions- Software Options: Milling, V-scoring marking, and DSTV interface for machining data import- Plasma Cutting Unit: Kjellberg HiFocus 360i (for material thicknesses up to 50 mm)- Exhaust System: Large-dimensioned filter unit of older year of manufacture with available piping- Control & PC: Modern CNC control enabling remote maintenance by Vernet Behringer service department, machine computer including software, and office software license- Sheet Dimensions: Min. 1500 x 300 mm (750 x 400 mm with restriction), Max. 4000 x 2000 mm- Min. Finished Part Dimensions: 80 x 80 mm- Sheet Weight: Max. 2000 kg and 650 kg/m- Drilling Diameter: 5 to 40 mm- V-Scoring Marking Depth/Diameter: 5 to 40 mm- Plasma Cutting Thickness: 5 to 50 mm- Number of Carriages: 2 clamps - feed carriage, laterally placed- Number of Clamps: 4 clamps (2 + 2)- Transverse Conveyors: 3 short-stroke transverse conveyors to align sheets against clamps after loading- Working Height: 1000 mm Tsdpfxez H Nwgs Aa Ijc

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 930853, WAB Turbula T2C from 1993. The mixer is in very good condition and was serviced by WAB in August 2026. During the service, the circular belts, flat belts, both tensioning pulleys, and the rubber tensioners were replaced with new ones. In addition, the following items are included as new: - 1 set of black rubber tensioners - 2 sets of red rubber tensioners (for heavier loads) - 1 mixing container, 1 liter Tjdpfxjz Dx N Te Aa Ijc - 1 mixing container, 2 liters Furthermore, the original operating manual from WAB and the maintenance log from 08/26 are included.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Tsdpfozl E N Eex Aa Ijc Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, machine/vehicle number: 220.00452, power: 7.5 kW (10.20 HP), Used, functional ALUP compressor stage Air End Tri AG 51-S The stage is used and in working order. Art. No.: 220.00452 Motor: Tjdpez Er Edefx Aa Ioc 7.5 kW 3970 rpm 16.5 A The price is €350 plus VAT. Freight shipping is available for an additional charge.

Condition: used, Year of construction: 2020, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :420 mm Travel distance Z: 370 mm table size X: 750 mm table size Y: 550 mm max. workpiece size X: 950 mm max. workpiece size Y: 740 mm max. workpiece size Z: 450 mm max. electrode weight: 50 kg max. workpiece weight: 1500 kg electrode changer: 32 - time C-axis generator: 60 Ampere cooler drop tank C-Axis Todpfx Aozg T Ewsa Iec 32-position Electrode Changer

Condition: used, functionality: fully functional, mileage: 238,700 km, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, Year of construction: 2009, Equipment: air conditioning, crane, MAN AG 26.360 6x2 - Year 2009 DIESEL/ Euro 5 Mileage: 238,700 km Automatic transmission/ Engine displacement: 10518 cc/ Power: 265 kW GVW: 260 quintals Payload: 11,030 kg/ Wheelbase: 3,900 mm Accessories: - Air conditioning Equipment: - Tipper body: 5110x2550x1380 mm (H) - PM 28526 SP crane + J614.20 antenna (6+4) * Outriggers, hydraulic Tjdpfx Aozwc R Dea Ioc * Radio

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A ----> Frequency: 50 Hz ----> Peak demand: 15 kW Tsdpfx Aszv Tt Hsa Isc The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. Todpfx Aozl E Stoa Isc The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: Tjdpfxozuw R Hj Aa Iec - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: ready for operation (used), Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible. Todpfx Aaoq Npf Uj Ioc

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. Tjdjxl Dx Sspfx Aa Ioc With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), We sell the shredder as a set including a pit conveyor, shredder, and discharge conveyor. Tjdjzmzduopfx Aa Ijc The Vecoplan universal shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power output of 55 kW, is equipped with 60 cutting heads measuring 60x60 mm. A turbo coupling facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine, including the control panel, is offered for sale. The hopper and extraction hood are included. Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. Now that the company is operating a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered ex-works at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging for pallet transport.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,390 mm, total width: 2,615 mm, wire diameter (max.): 0.3 mm, table width: 710 mm, overall weight: 5,200 kg, table length: 1,050 mm, table load: 1,000 kg, controller manufacturer: SODICK, controller model: LP20WH, product length (max.): 2,740 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Sodick AG 600 L wire EDM machine was manufactured in 2011. It features a maximum workpiece size of 800 × 570 × 340 mm and a robust table size of 1,050 × 710 mm. With a wire feed speed of 20 mm/s and a dielectric tank capacity of 800 L, this machine is designed for precision and efficiency. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AG 600 L machine we have for sale. Contact us for further details. • Type of drive: Linear motor drives Todpfxozi Ayvo Aa Ijc • Power consumption: 10.5 kVA (max. 13 kVA) • Maximum workpiece size: 800 × 570 × 340 mm • Taper angle: ±25° (at 100 mm workpiece thickness) • Wire tension: 3–23 N • Wire feed speed: 20 mm/s • Dielectric tank weight (empty): 600 kg • Filtration system: Replaceable filter (3 internal pressure filters) • Deionizer: Ion exchange resin (18 L container) • Required floor space: 3,700 × 3,900 mm • 60 A generator • Super Pika 0.1 Ra finishing circuit board • Automatic wire threader/cutter • Wire feeder unit for spools up to 50 kg

Condition: used, Year of construction: 2007, Wire EDM machine Sodick AQ537L, year of manufacture 2007 with few operating hours It has a total operating hour counter, which indicates the total time the machine has been switched on. This shows approximately 4,500 hours; during this time, it performed actual wire EDM work for 70% of the time, which corresponds to approximately 3,100 – 3,500 actual operating hours. Wire EDM machine Sodick AQ 327L, year of manufacture 2006 Wire EDM machine Sodick AG 60L, year of manufacture 2020 Todpfey Rxtkex Aa Ioc

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 7,765 h, Behringer HBP 263 AG fully automatic metal bandsaw (2008) Manufacturer: Behringer Model: HBP 263 AG fully automatic metal bandsaw Year of manufacture: 2008 Tsdpozwhdpofx Aa Isc

Year of construction: 2017, condition: excellent (used), machine/vehicle number: 26616, Equipment: CE marking, The Hapa 237-Hybrid is a modular UV printing system that combines the cost-effective features of flexographic technology with the full flexibility of digital drop-on-demand printing. The system is a standard solution from HAPA, designed for printing onto aluminum foil for blister machines. In its current configuration, the system is installed on a separate stand with a dedicated unwinder to enable inline printing with a blister machine. The system can be reconfigured for top-mounting or roll-to-roll operation at an additional cost. Utilizing UV-cured inks, it is ideally suited for pharmaceutical applications. Installation and validation can be provided by PPS. KEY ADVANTAGES • Award-winning HMI, also available as a software version for integration into the host packaging machine interface. • Fully compatible with camera inspection systems. • Digital integration and system automation control via OPC UA. • Supports black and Pantone spot colors. • High speed, up to 35 meters per minute. • Ozone-free UV curing technology. Tsdpfx Aoyr Imboa Ijc • Format-free operation. • Automatic printhead cleaning system (DOD). • Simple and accurate print plate mounting (Flexo) using location pins, eliminating the need for adhesive tape. • Easy to handle, quick-change inking devices (Flexo). Detailed Information: Footprint: Machine depth (mm): 1387 Machine height (mm): 2281 Machine length (mm): 1020 Machine weight (kg): 1075 Other Technical Features: Technological Application: Blisters, Deep-draw blisters, Trays, Pouches Substrates: Aluminum foil, Paper-backed foil, Paper, PVC, Tyvek Technical Data: Max. advance length (mm): 350 Max. printing width (mm): 298 Max. web width (mm): 310 Min. advance length (mm): 90 Min. web width (mm): 70 Resolution (dpi): 360 Max. printing speed (m/min): 35