Used Buderus Bv 1250 for sale (4,397)

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm Chodpfsw Rgcfox Ac Tsb turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation

Condition: used, Year of construction: 2009, CNC series 245 A 3l T R DH, control system, manufacturer: Siemens, type: Sinumerik 840D SL, 2 spindle units (1x external type WMZ; 3x internal, manufacturer: GMN, type HSX 150-24.000/23 with tool holder HSK 63; grinding spindle turret), 2 cross slides, 2x C-axis, 2x magnetic chucks Ø 800 mm, workpiece Ø max. 1,000 mm, workpiece length max. 400 mm, spindle speeds max. 1,000 rpm, table travel X1/X2 axis 885 mm, table travel Z1/Z2 axis 1,000 mm, 4 table levelers, electronic balancing system MPM, coolant system, manufacturer: Liqui, type KSS system MTBF V500, MW250, capacity 1,900 l, band filter, temperature control, manufacturer: Hyfra, chip conveyor, switchgear and control cabinets, platform, table system, 5-piece, 3 drawer cabinets, 5 drawers, contents: setup tools, machine accessories. Chedpfx Aezgvlyjc Tjb

Condition: good (used), Year of construction: 2007, turning diameter 1600 mm control Sinumerik 840D workpiece dia. 1400 mm boring diameter 100-500 mm weight of the machine ca. 35 t dimensions of the machine ca. 5,60x3,20x4,00 m Codewzmqropfx Ac Tjhb

Condition: used, Year of construction: 2007, turning diameter 1400 mm swing diameter 1600 mm turning height 500 mm Workpiece length - Bore grinding 300 mm Workpiece length - Turning 500 mm control Siemens Sinumerik 840 D work piece spindle speed range 0-400 U/min boring diameter 100 - 500 mm total power requirement ca. 185 kW weight of the machine ca. 35 t With grinding spindle Table strokes: - Z1/Z2 axis 1000 mm - X1/X2 axis approx. 1400 mm Table speed infinitely variable: - Z 0 to 30 m/min - X 0 to 60 m/min Codpfxew Rf Sle Ac Tjhb - Workpiece spindle flange diameter 520 mm - Infeed speed 0.01 - 15 mm/min Equipment/ Accessories - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - documentation

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Csdpjzwm Akofx Ac Tjhb Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: excellent (used), Year of construction: 2007, Buderus SB735 low temperature boiler Year: 2007 Cjdpjnr Ek Uofx Ac Tehb Output: 1200Kw Burner: Weishaupt oil or gas burner on request

Condition: excellent (used), Year of construction: 2008, Boiler Buderus GE315 Output:170kw Burner: oil or gas Weishaupt burner available on request Chsdpemnqcmofx Ac Teb Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2011, Buderus GB312 gas condensing boiler Output: 160Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Chsdpfx Acemnqb Ee Tjb Of course we also take care of all formalities Loading possible

Year of construction: 2018, condition: used, overall weight: 10,000 kg, total length: 2,300 mm, total width: 6,500 mm, total height: 2,400 mm, BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Cedozwa Rhopfx Ac Tohb Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar Control: Siemens SINUMERIK 840D Travel Z-axis: 300 - mm Workpiece diameter over bed max.: 150 mm Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 2300 x 6500 x 2400 mm Travel X-axis: 1240 - mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: used, Year of construction: 2010, operating hours: 3,426 h, functionality: unexamined, pressure: 6 bar, power: 12,600 kW (17,131.21 HP), temperature: 110 °C, operating temperature: 110 °C, total height: 3,025 mm, total length: 6,315 mm, nominal heat output: 12,600 kW (17,131.21 HP), total width: 2,724 mm, insulation thickness: 100 mm, tank capacity: 18,300 l, We offer this Buderus S825L-12600 hot water boiler, in very good condition, manufactured in 2010. Type: S825L-12600 Csdpjzlqb Tsfx Ac Tjhb Maximum permissible pressure: 6 bar g Test pressure: 9.6 bar g Maximum permissible temperature: 110 °C Nominal thermal power: 12600 kW Total volume: 11830 l Serial number: 31022150-00-106809 Month/year of manufacture: 08/2010 Manufacturer: Bosch / LI LA If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Complete internal piping with insulation, circulation pumps, water treatment Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Chsdpfjy Sz Ruex Ac Teb Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Original purchase price 2023: approx. 150,000 € Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are selling a lightly used, fully functional, and exceptionally equipped brake disc grinding machine from BUDERUS. The machine is currently still in production and can be demonstrated under power. Buderus Brake Disc Grinding Machine, Type BDG220 2A SL Technical data: Chodpfxsy Drh Us Ac Tob - Max. workpiece diameter: 440 mm - Max. workpiece height: 150 mm - Max. swing diameter over table: 500 mm - Workpiece spindle speeds, NC programmable: 0 – 1,000 rpm Machine design: Surface grinding spindles on vertical feed axes, mounted on a horizontal travelling column; workpiece spindle mounted on a changeover table for optional parallel main time loading Workpiece dimensions: diameter up to approx. 450 mm Control: Siemens 840D Solution Line with S7-300 PLC Installation data: Weight approx. 8,500 kg, dimensions 3,000 x 2,445 x 1,980 mm, electrical connected load 42 kW (pre-fusing 80 A) Further details regarding the equipment and technical specifications are available with our offer.

Condition: excellent (used), Loos 1000kW heating container emergency heating with gas burner Conversion to oil or biogas possible Chjdpfxjy Evlte Ac Tsb

Year of construction: 2014, operating hours: 59,436 h, condition: used, functionality: fully functional, machine/vehicle number: 100010336, Buderus Loganova EN20 CHP Unit, 19 kW electric / 38 kW thermal For sale is a Buderus Loganova EN20 combined heat and power (CHP) unit manufactured in 2014. The unit comes from a commercial property in 70567 Stuttgart and is being decommissioned due to an upgrade of the energy supply. Since commissioning, the CHP unit has been regularly serviced as part of a premium maintenance contract. A documented service history is available. °°°Technical Data:°°° * Manufacturer: Buderus * Type: Loganova EN20 * Serial Number: 100010336 * Year of Manufacture: 2014 Codpfszv Sfnsx Ac Tshb * Electrical Power: 19 kW * Thermal Power: approx. 38 kW * Fuel: Natural Gas * Fuel Power: 35–56 kW * Electrical Operating Range: 9.5–19.0 kW * Supply Voltage: 400 V * Rated Current: 36 A * Rated Frequency: 50 Hz * Pre-fuse: min. 63 A * Gas Inlet Pressure: 20–65 mbar * Max. Supply Temperature: 85 °C * Max. Operating Pressure: < 6 bar * Device Type: B23 * Protection Class: IP40 * Rated Speed: 1,522 rpm °°°Operating Hours:°°° * 59,436 operating hours * 6,031 start cycles °°°Condition:°°° The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. Based on initial assessment, the heating water pump is defective. The CHP unit is currently out of operation and is being offered with the corresponding repair requirements. °°°Location:°°° 70567 Stuttgart, Germany The planned decommissioning or dismantling is expected to take place between August and September 2026. An inspection is possible after prior arrangement. We will gladly provide additional photos, technical documents, and information on the available service and maintenance history upon request. Sale of a used technical unit in its current condition.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 920 kW (1,250.85 HP), overall weight: 3,465 kg, total width: 1,281 mm, total length: 2,606 mm, total height: 1,595 mm, pressure: 6 bar, nominal heat output: 920 kW (1,250.85 HP), temperature: 183 °C, tank capacity: 801 l, fuel: liquefied natural gas (LNG), operating pressure: 6 bar, Equipment: documentation/manual, For Sale: Full working and complete Industrial Gas Boiler System Buderus Logano GE615 – 920 kW | 2023 | Excellent Condition High-performance industrial heating system for sale, commissioned at the end of 2023 and operated for only two heating seasons (2023/2024 and 2024/2025). The system is currently fully operational and can be inspected and tested under working conditions. Sold as it is with all the hardware including stainless steel chimney, electrical distribution panel and complete interior fittings included in the price. The installation was professionally executed and regularly maintained. The system is in excellent technical condition with no leaks, corrosion, or structural defects. The boiler can be adapted for alternative fuel operation (e.g. LPG or oil) subject to burner configuration and technical adjustment. Main Configuration: Boiler Buderus Logano GE615 – 920 kW Nominal output: 821 – 920 kW Number of sections: 13 Flue gas temperature: 139 – 183 °C Length: 2606 mm Width: 1281 mm Height (without control unit): 1595 mm Flue connection: 360 mm Weight: 3465 kg Burner: *Weishaupt VW-G 10/4-AZM Gas Burner Control System: *Bosch CC8311 Control Unit Circulation Pumps: *2 × Wilo Yonos MAXO 80/0.5-12 Technical Specifications: Type: Industrial cast iron gas boiler Fuel: Natural gas/Diesel Condition: Fully operational Chjdpfoy Tp Evox Ac Tsb Year of installation: 2023 Operating period: 2 heating seasons only Inspection and live test possible on site Suitable Applications: Hotels Hospitals Manufacturing facilities Administrative buildings Schools Greenhouses Logistics and industrial centers Additional Information: Automation and circulation pumps included Dismantling and transport can help with logistics Sale as a complete boiler room system Price EUR 58,000 EXW plus VAT Contact G. Jordanov Location: Ruse,Bulgaria

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, Equipment: cabin, documentation/manual, Log cutting line: Chedpfx Acszwf Ncs Tjb 1) WRAVOR band saw, type WRC-1250 2) Circular saw for edging and ripping with 3 movable and one fixed blade, PLC controlled, type WRAVOR 20/120 3X 3) Wravor conveyors for extracting lumber at the band saw outlet, transferring to the edger, feeding into the edger, and a conveyor with left-right discharge at the edger outlet, plus a log loading ramp for the band saw The equipment can also be sold separately (either the band saw or the edger). For sale: complete WRAVOR log cutting line, type WRC-1250 Wravor Sawmill Machinery, manufactured in 2019: 1) Wravor band saw WRC 1250 2) Circular saw for edging and ripping with 3 adjustable and one fixed blade, type WRAVOR 20/120 3X 3) Conveyors (log loading ramp, lumber discharge conveyor from the band saw, transfer to the edger, edger feed conveyors, conveyor with left-right discharge at the edger outlet) Price for the entire line: 158,000 euros + VAT. The equipment can also be sold separately; for more details, please call:

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Ready for immediate use Technical data Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Chjdpfxszvgbqe Ac Tjb Early reservation or coordination of the delivery date is possible and desirable. Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Category ID: 1052 Type ID: 136 Type: Slitting line

Condition: good (used), RMF Vacuum Tumbler Capacity 1250 ltr Model MM2 - LD2 With Tote Bin Loader All stainless steel In excellent condition Chodenmyx Espfx Ac Tob

Condition: excellent (used), Novumax H2R 625 / 600 kW heating boiler Buderus/Viessmann Csdpfx Acjywzx Ae Tjhb

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,460 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,345 mm, spindle motor power: 18,500 W, bar diameter (max.): 80 mm, controller manufacturer: MITSUBISHI, controller model: M-730BM(MAPPS 4), number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG MORI NLX2500SY/1250 was manufactured in 2013. It features a maximum X-axis travel of 260 mm, Y-axis travel of +/- 50 mm, and Z-axis travel of 1345 mm. The machine is equipped with a 12 station turret with milling function and a spindle speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI NLX2500SY/1250 horizontal turning machine we have for sale. Contact us for further details. • Spindle 1: 18,5/15 kW, 4000 rpm; hollow spindle Ø 91 mm • Spindle 2: 11/7,5 kW, 6000 rpm; hollow spindle Ø 43 mm • Turret: Sauter 12-station with milling function, 6000 rpm • Y axis present • Stroke end detection • Bar feeder interface (prepared) Additional equipment • Automatic door (not original) Technical Specification Counter Spindle Yes Driven Tools Yes Codpfx Acszxpq Ho Tshb

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: Codozd U D Njpfx Ac Tehb 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. We invite you to contact us.

Condition: good (used), Buderus 825 M-2500kw. Low temperature boiler Chjdpou I Ruaefx Ac Teb

Condition: used, Year of construction: 2013, machine/vehicle number: 2108, functionality: fully functional, operating hours: 10,000 h, power: 11 kW (14.96 HP), input voltage: 230 V, input current: 39 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 46 m², noise level: 65 dB, actuation type: electric, total height: 4,000 mm, total length: 2,900 mm, total width: 850 mm, overall weight: 600 kg, year of last overhaul: 2026, Equipment: documentation/manual, VACUUM SYSTEM IN PERFECT WORKING ORDER (lightly used, auxiliary system). SUPPLIED WITH 3 LARGE-DIAMETER PRIMARY HOSES AND 2 BOXES OF PLASTIC BAGS SIZED FOR THE CONTAINERS. OPTIONAL: ADDITIONAL LINERS CAN BE PURCHASED. Chodpozvquhofx Ac Tsb

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Chjdpfx Acox U Eyfo Tsb

Condition: excellent (used), Buderus GE315 heating boiler 230kW (0295), available with oil or gas burner on request Cjdpfx Asxqry Ioc Tohb