Used Bt Spe 200 Dn for sale (20,257)

Condition: excellent (used), functionality: fully functional, Fork length: approx. 115 cm, max. load capacity: approx. 1000 kg, weight without battery: approx. 955 kg, year of manufacture: 2017, known fault: discharged battery and worn drive wheel. BT SPE 200 DN high-lift pallet truck. Lrjdpfx Absyu Tbpsysu

Condition: excellent (used), Fork length: approx. 115 cm, duplex mast, max. lifting height: approx. 320 cm, max. load capacity: approx. 1000 kg, weight without battery: 955 kg, year of manufacture: 2017. High-lift stacker BT SPE 200 DN Lrjdpfjyu Td Dex Abyju

Condition: excellent (used), Fork length: approx. 115 cm, duplex mast, max. lift height: approx. 320 cm, max. load capacity: approx. 1000 kg, weight without battery: approx. 1040 kg, year of manufacture: 2018, known defects: forks do not lift and battery is discharged. BT SPE 200 DN high-lift pallet truck. Ljdjyu Tfbopfx Abysru

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,304 h, load capacity: 2,000 kg, lifting height: 1,900 mm, free lift: 172 mm, fuel type: electric, mast type: duplex, construction height: 1,483 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Load centre: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Lrsdpfx Abey A Ancsysu Battery voltage: 24V Battery year: 2018 Description: Initial lift, electric steering

Condition: new, Year of construction: 2012, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2266, table width: 200 mm, 4th and 5th Axis Rotary Table LCM ITALY BRC-200 (NEW / NEVER USED IN PRODUCTION) General Description: Due to changes in production requirements and reorganization of work processes, we are selling a 2-axis rotary and tilting table (4th and 5th axes) manufactured by LCM ITALY, model BRC-200. The table was purchased as an accessory for an ISPER HSP643 machining center and was only installed and tested during the machine acceptance phase. Immediately after functional verification, it was disassembled and stored in the warehouse. The equipment is completely new, has never been used in production, and is perfectly preserved. Technical Specifications and Condition Manufacturer: LCM ITALY Model: BRC-200 Type: Integrated 4th and 5th axis rotary table for CNC machining centers Original machine: ISPER HSP643 machining center Testing CNC: Heidenhain TNC 530 Lsdsz Hvg Ujpfx Abyjru Condition: New / Unused (only acceptance testing) Documentation: Wiring diagrams and complete original technical documentation from the manufacturer are provided. Support and Interfacing The manufacturer, LCM ITALY, is available to provide direct technical support for interfacing, configuration, and any installation/restoration of the table, even on a different CNC or machine. Sales Conditions Availability: Immediate Inspection: Can be viewed in person at our facility by appointment.

Condition: good (used), Control system: Siemens 840 D Turning diameter: 290 mm Turning length: 850 mm Distance between centers: 600 mm Spindle bore: 103 mm Lrodps Afacdjfx Abysu Spindle speed: 3,000 rpm Driven tool speed: 3,000 rpm Chip conveyor Weight: 11,000 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: 6731413, Year of construction: 2020, operating hours: 291 h, load capacity: 2,000 kg, lifting height: 1,800 mm, free lift: 170 mm, fuel type: electric, mast type: duplex, construction height: 1,430 mm, battery capacity: 400 Ah, battery voltage: 24 V, fork length: 1,600 mm, empty load weight: 1,420 kg, Toyota SPE 200D Pallet stacker, year of manufacture 2020 with a Standard mast and initial lift Details: Toyota SPE 200D Year of manufacture: 2020 Work hours (h): 291 Mast type: Standard Lift height (mm): 1800 Freelift (mm): 170 Build height (mm): 1430 Initial lift: Yes Lift capacity (kg): 1000 / 2000 Fork length (mm): 1600 Weight (kg): 1420 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2020 Battery capacity (Ah): 400 Battery voltage (V): 24 Ljdpfx Aexugwcsbyeru Accessories: Power steering. Flashing beacon. Toyota SPE 200D Pallet stacker, year of manufacture 2020 with a Standard mast Details: Toyota SPE 200D Year of manufacture: 2020 Work hours (h): 291 Mast type: Standard Lift height (mm): 1800 Freelift (mm): 170 Build height (mm): 1430 Initial lift: Yes Lift capacity (kg): 1000 / 2000 Fork length (mm): 1600 Weight (kg): 1420 Front wheels: Polyurethan Rear wheels: Polyurethan Battery YOM: 2020 Battery capacity (Ah): 400 Battery voltage (V): 24 Accessories: Power steering. Flashing beacon.

Condition: used, functionality: fully functional, machine/vehicle number: 6632091, Year of construction: 2018, operating hours: 5,098 h, load capacity: 2,000 kg, lifting height: 2,640 mm, free lift: 1,450 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, fork length: 1,200 mm, drive type: Elektro, High lift truck Chassis number: 6632091 Mast type: Duplex Lsdjvthvbjpfx Abyoru Condition: Ready for use and fully functional Technical condition: good Description: BT SPE 200 D No.: R0518 Year of manufacture: 2018 Operating hours: 5098 Devices are sold without UVV and in their current condition! Charger on request. The device is in good optical and technical condition. Fast and uncomplicated transport possible by arrangement! The advertisement is only for identifying the device! A precise description of the condition and possible equipment is provided individually on request! Errors and prior sale reserved, sale only to traders.. all sales of used goods are made without warranty and/or guarantee. If you have not found your forklift, contact us. We have a large selection of other devices on site. Initial lift, Initial lift

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, load capacity: 2,000 kg, lifting height: 2,150 mm, free lift: 1,156 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,744 mm, battery weight: 405 kg, fork length: 1,150 mm, total height: 1,744 mm, total width: 850 mm, 2 UNITS IN STOCK MANUFACTURED IN NOVEMBER 2022, BATTERIES FROM 2023 INCLUDES CHARGERS IN EXCELLENT CONDITION Lsdpezibbfsfx Abyjru

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Lrsdpfey St Sdex Abysu Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Lsdpfx Abogkgwfoyeru Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition

Condition: used, Year of construction: 2016, Overview Lrjdoz Sr Uyepfx Abyeu This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Lodpfxez Sr H No Abysru Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: used, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ljdezkudcopfx Abyjru Lukas van Rossum

Condition: ready for operation (used), * Model: suspended idlers * For Belt: 1200 mm * Rolls with size: 465 mm L x 133 mm ∅ Lsdpfoywl Tdox Abyjru * Price: €36 a Piece * Stock: 300 pieces.

Condition: used, Year of construction: 2011, operating hours: 14,000 h, machine/vehicle number: LC660, Used Tetra Pak A3 speed 030V 200 slim Filling lineTechnical Specifications & Performance DataThis complete used bottling line is a Tetra Pak A3 Speed (030V) configuration dedicated to 200 ml Slim cartons. It is a second hand, overhauled industrial packaging solution engineered for consistent performance in beverage production. All core components are manufactured by Tetra Pak for seamless compatibility and robust uptime.Main filler: Tetra Pak A3 Speed (030V), year 2011Container format: 200 ml Slim cartons (0.2L)Production capacity: 24,000 packs/hourRecorded hours: Filler 25,731 h; Accumulator 1,609 h; Straw applicator 14,219 h; Case packer 21,065 hLine status: Used and overhauledManufacturer: Tetra Pak (all included machines)Container type: Carton (brick-style)Included models: A3 Speed 030V filler; ACHX 30 accumulator; SA30 straw applicator; CBP30 Speed case packerAdvanced Automation & Control SystemsThe line benefits from Tetra Pak’s integrated automation philosophy, bringing reliable controls, intuitive operation, and coordinated start/stop logic across the equipment set. Operator interfaces provide clear status visualization, guided changeovers for the 200 ml Slim format, and recipe-based parameter management. Safety interlocks and guarded access points help protect operators while maintaining fast serviceability. The coordinated control across filler, applicator, accumulator, and packer reduces bottlenecks and supports stable high-speed operation in demanding packaging environments.Production Line Integration CapabilitiesDesigned for inline operation, this packaging machinery set delivers smooth product flow from filling through secondary packaging. The accumulator supports continuous production by buffering short downstream stops, while the straw applicator and case packer complete the distribution-ready presentation. The system can interface with upstream and downstream conveyors, printers, and palletizing solutions to form a complete production line.Machine typeManufacturer / ModelYearFilling MachineTetra Pak A3 Speed 030V2011Straw ApplicatorTetra Pak SA302011Accumulation SystemTetra Pak ACHX 302011Case PackerTetra Pak CBP30 Speed2011Machine Condition & Maintenance HistoryThis second hand Tetra Pak used bottling line has been overhauled and is presented in working con... Lrode Adtx Aspfx Abyeu

Condition: used, This listing is for a Chemspeed ASW2000 Parallel Synthesiser ASW2000: Automated synthesis workstation The ASW platform enables you to do automated and unattended synthesis integrating work-up and analysis during or at the end of the synthesis. 1. Transfer your chemistry to an automated synthesizer without restrictions or compromises: reactors in glass (maximum temperature range) and reagent handling under completely inert conditions. 2. Automated and unattended synthesis with complete process integration - from reagent preparation to synthesis, work-up, analysis and output. Lodpfx Aoxzg Nfjbyoru 3. Modular systems that can be configured for solution and solid phase synthesis: switch between modes, even in one synthesis protocol, or mix the two modes.

Condition: excellent (used), machine/vehicle number: 6876233, operating hours: 444 h, lifting height: 2,500 mm, free lift: 1,360 mm, fuel type: electric, mast type: duplex, battery capacity: 210 Ah, fork length: 1,200 mm, Year of manufacture: 2022 Ljdpfx Ajzih D Hsbyeru Lifting capacity: 1.000 kg Maximum passing height: 179,3 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = - Free lift

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 1 BT Electrical connection 380V Dimension L (Length) Ljdpozfwl Sefx Abyjru 3200mm Dimension W (Width) 1400mm Dimension H (Height) 1850mm

Condition: excellent (used), For sale, in very good condition: TIG welding machine, L-TEC 200 DC. The price is per unit. Lodez Sb Dxjpfx Abyoru

Condition: excellent (used), Year of construction: 2017, TOYOTA Model: SPE200DN S/N: 6553285 Condition: OPERATIONAL Hours (MTH): 3118 Year: 12-2017 The listed price is net price (excluding VAT) Weight: 955 kg Lifting capacity: 2000 kg Lift height: 2000 mm Battery capacity: 400 Ah Battery: YES (professionally refurbished, hence no battery shown in the photos) Charger: NOT INCLUDED Maximum speed: 10.0 km/h Battery weight: 195–310 kg Battery voltage: 24V Repairs: drive wheels replaced, battery refurbished, control lever set replaced. See our other items by clicking “More from this advertiser” on the right side of the listing. Feel free to contact us; price in the listing is negotiable. Telephone contact available from 8:00 to 16:00, Monday to Friday. Collection possible from 8:00 to 15:00 at our warehouse in Częstochowa, after prior telephone arrangement. Lredpfx Absy Akbwjyju

Condition: excellent (used), machine/vehicle number: 7103123, operating hours: 63 h, lifting height: 1,750 mm, free lift: 170 mm, fuel type: electric, mast type: duplex, battery capacity: 210 Ah, fork length: 1,200 mm, Year of manufacture: 2024 Lodjzt Hnxspfx Abyeru Maximum passing height: 149,3 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information

Year of construction: 2000, condition: used, Punching machine Premium quality HM 35/350 BKE 200/5 Maximum pressure: 35 tons Lrsdpfx Abog Dgyxeysu 5 mm sheet thickness at 40 kp/mm²

Condition: used, functionality: fully functional, machine/vehicle number: 6681545, Year of construction: 2019, operating hours: 653 h, load capacity: 1,000 kg, lifting height: 2,100 mm, free lift: 172 mm, fuel type: electric, mast type: duplex, construction height: 1,593 mm, drive type: Elektro, High-lift pallet truck Chassis number: 6681545 Mast type: Duplex Ledpfxoztg Hhe Abyjru Technical condition: good Battery type: PzS Description: Toyota SPE200DN No.: 6681545, Year of manufacture: 2019, Operating hours: not specified, Rated fork capacity: 1,000 kg, Support arm capacity: 2,000 kg, Lifting height: 2,100 mm, Overall height: 1,593 mm, Free lift: 172 mm, Mast: Duplex, Initial lift / base lift: 120 mm, Load centre: 600 mm, Battery: 24 V, Capacity, year and manufacturer not specified, Equipment: Initial lift, foldable operator platform. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Lredpozizl Rsfx Abyeu Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.