Used Bottero Glass Drilling Machine for sale (67,423)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS Pgsdpfxoh Ek H Sj Agxep EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Year of construction: 2013, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, overall weight: 520 kg, We offer this used Bottero 710C glass drilling machine, manufactured in 2013. Model: 710C Serial number: GG710C-20596 Year of manufacture: 2013 Voltage: 400 V Frequency: 50 Hz Rated current: 8 A Weight: 520 kg Pgedpfxszmwrnj Agxsp If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 1991, Glass drilling machine with table (extendable) 1. Width: 900 mm 2. Width: 1800 mm / with arms extended Height: 1600 mm Podpfxezfhd Eo Agxogp Depth: 1200 mm Condition: good, second-hand

Condition: like new (used), Year of construction: 2004, Double-side glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of production: 2004 With roller table With manual positioning Pgedpfxsiy Dxke Agxjp Water tank with pump included Very good and clean condition Availability immediate

Condition: repair required (used), Year of construction: 2008, For sale: Bottero Technopower CNC glass processing center. The machine is currently not operational and requires an interchangeable distributor subassembly part, as well as a few smaller components. The machine has been completely refurbished, but the owner did not purchase the aforementioned part needed to get it running. The machine is being sold in its current condition. Pgjdpfxezh Unce Agxop Disassembly, loading, and transportation of the machine are the responsibility of the buyer. Available for immediate removal!

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine Podpfx Agjyub Azexogp with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm

Condition: used, Year of construction: 2010, machine/vehicle number: GG710C-18759, functionality: fully functional, input voltage: 400 V, input current: 8 A, type of input current: three-phase, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, overall weight: 850 kg, drill diameter: 140 mm, pressure: 6 bar, spindle speed (min.): 3,800 rpm, One semiautomatic glass drilling machine, with two opposite heads available in 03-2026 (still in production). Max sheet size: 2600x1350mm. Min sheet size: 80x80mm. Max tool diameter: 140mm. Glass thickness from 1.8 to 55mm. Spindle speed: 3800rpm. Podeyc Egyjpfx Agxsgp

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 5976/07, functionality: fully functional, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, total width: 1,850 mm, total length: 2,500 mm, total height: 1,750 mm, overall weight: 420 kg, drill diameter: 130 mm, pressure: 6 bar, working height: 1,000 mm, Equipment: documentation/manual, RBB Trapano double-sided drilling machine, technically refurbished at our Belgium warehouse. Includes a set of used tools, see picture. Pgodpfx Agoxg Ngqoxsp

Condition: used, • Type: W125 • Year of manufacture: 1989 • 2 brushes / water tank, pumps • Running direction: Right to left • Open top • Washing brushes 130 cm high • Heating • Price on request Pgedpjyucwysfx Agxep

Condition: good (used), • Model – FMF 100 • Double-sided drilling machine • Min. diameter: 3 mm Pjdpfouqma Asx Agxogp • Max. diameter: 300 mm • Speed: 110 – 4600 rpm • Lower drill with automatic feed, upper drill guided manually

Condition: good (used), Year of construction: 1995, Electrical connection rating: 1.75 kW 380/220 V/ 5.2 A Total length with side tables: approx. 2520 mm Depth max. approx. 1170 mm Height max. 1550 mm Pgjdoxrp Nispfx Agxjp

Condition: good (used), Year of construction: 2013, Work table can be extended by an additional 700 mm on both the left and right sides Pgodjw Sdwiepfx Agxsp Width: 1850 mm Height: 1800 mm Depth: 1200 mm

Year of construction: 2023, condition: ready for operation (used), Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. Psdpfx Asnp I N Asgxsgp

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Pjdpfx Agjy Nltnexogp Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: used, Year of construction: 2001, machine/vehicle number: 526/01, functionality: fully functional, operating hours: 60,000 h, input voltage: 380 V, type of input current: three-phase, feed length X-axis: 1,250 mm, Used glass drilling machine with automatic ruler. In good condition. Pgedpex Rp Rgofx Agxjp

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Very good and clean condition Surplus drilling/countersink bits included As is Available immediately Pgjdpfx Aoyfrvyegxsp

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Podpfxjzdki Uj Agxegp Powertouch screen Woodwop for machine Energy Saving Mode

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Pgsdpfxjzlhlpo Agxjp Model: ZB 32 Capacity: 2.5-32mm With Cams

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Psdjzlg Szopfx Agxogp Model: 108

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Pgodpjzmuntofx Agxjp Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Pjdpfjwyup Tjx Agxogp Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: like new (used), Year of construction: 2013, functionality: fully functional, COLLECTIVE LISTING - 3 FICEP EXCALIBUR CNC BEAM DRILLING LINES Three refurbished CNC single-spindle beam drilling lines from the Ficep Excalibur series: two Excalibur 12 (1201 DE, year 2013) and one Excalibur 6 (601 DE, year approx. 2011). Together they form a graduated profile-processing line (up to 1,200 mm and up to 610 mm). EACH MACHINE AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT (all three lines) All three machines have been refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). === MACHINES 1 + 2: FICEP EXCALIBUR 12 / 1201 DE / YEAR 2013 === Two identical lines, serial numbers 33900 and 34062. CNC single-spindle beam drilling line based on the moving-column principle. The moving drill head with direct drive performs drilling, countersinking, tapping, milling and scribing in a single pass. Pedpfx Agev Iamzoxegp - Profile cross-section: max. 1,200 x 800 mm, min. 50 x 50 mm | length up to 12 m | CE - Profile shapes: I-beams, channels, angles, flat bar, square/rectangular hollow sections - Drill head: 1, direct drive, 19 kW | 180-4,000 rpm | max. drilling diameter 28 mm - Drilling feed: ball screw, servo-driven | CNC axes: 5 - X-axis: travel 0-15,000 mm, 35 m/min | Y-axis: 12 m/min | rack and pinion - Tool changer: 6-position automatic (ATC), HSK A80 - Clamping: hydraulic double-acting | Profile detection: laser, non-contact - Coolant internal (through spindle) and external - Control: Ficep Pegaso CNC (PC/CNC/PLC integrated), remote diagnostics via network - Interfaces: DSTV, DXF, XML (Tekla) | Table: 15 m long, approx. 3,300 mm wide Scope of delivery per line: drilling unit 19 kW | support table with guide rail 15 m | 6-position ATC (HSK A80) | Pegaso CNC | radio remote control | coolant system. === MACHINE 3: FICEP EXCALIBUR 6 / 601 DE / YEAR APPROX. 2011 === Serial number 32754. More compact line with moving drill cabin, workpiece stationary on the clamping frame. - Profile cross-section: max. 610 x 610 mm, min. 30 x 30 mm | I-beam web height up to 610 mm - Max. machining length: 12,000 mm | X-axis traverse 0-12,000 mm, rack and pinion - Profile shapes: I-beams, angles, UPN channels, flat bar, square/rectangular tube - Drilling spindle: 1, 7.5 kW | max. drilling diameter 22 mm | manual change (quick-change chuck) - Operations: drilling, countersinking, tapping (with suitable tooling) - Clamping: double-acting automatic (top/bottom), min. 30 x 30 mm - Control: Mitrol CNC (Ficep Group) Scope of delivery: beam drilling line 601 DE | Mitrol CNC | traverse frame 12,000 mm | length measuring/positioning system X-axis (configuration confirmed during inspection) | automatic clamping system | quick-change chuck. Machine weights, rated voltage and footprint per line follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Price on request - individually or as a package | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Pgedpfx Aszi Tqljgxsp Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Pgodpovm Akgjfx Agxep portable radial

Condition: excellent (used), Cup band forming machine with press-in device Pneumatic clamps Foot pedal, stop rail and stand Podpfet Tbutsx Agxegp Some drills included