Used Bollegraaf Hbc 50A for sale (415)

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Number of wires: 5 Bodpfx Asxtmyzjlcslh

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Bsdpevf E Avjfx Alcolh Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Blsdpoviwdmefx Alcsh Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Bljdpfx Aljtvau Aecsh Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Bljdpfx Ajxvh Dyelcsh Intermediate hopper Conveyor chute Control cabinet Schneider PLC

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: Machinenummer 230067.020, pressing force: 60 t, power: 45 kW (61.18 HP), operating pressure: 250 bar, Bollegraaf Recycling Solutions, the original manufacturer of this mobile Bollegraaf baler, hereby offers the following machine(s) FOR RENT ONLY: Year of construction: 2022 Weight excl trailer: 22.000 kg Mobile Baler Volume capacity m3/hr max. 365 334 321 301 Volume weight kg/m3 max. 15 30 50 80 Weight capacity T/hr max. 5.5 10 16 24 Bale weight 400 – 800 kg, depending on S.G. of material and bale length Bale length - adjustable Bale height - 720 mm Bale width - 1100 m Filling opening - 1100 mm x 1320 mm Max. size supply - 1500 mm x 1200 mm Pressure force ram - max 60 tonf. Bodpfx Ash I T Ibjlcslh Pressure force pre-press flap - max 25 tonnes Cycle time - 18 seconds Motor - 45 kW Motor Twistomat - 2.2 kW Motor counter pressure pump - 1.1 kW

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. This is an HBC60 (30kW) baler with vertical binding. This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Technical condition is very good! (the baler has only baled paper) This baler comes with the following options: Bsdpfxsyux Nxs Alcolh * intermediate hopper + distributor * belt feed chute * bale discharge, * wire roller platforms

Condition: reconditioned (used), Year of construction: 2014, operating hours: 24,967 h, functionality: fully functional, machine/vehicle number: 004283-0030, pressing force: 122 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, warranty duration: 24 months, year of last overhaul: 2026, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. Bledjxcir Espfx Alceh This is a baler HBC120s (90kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. Bljdpfx Aletvat Tscoh At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

Condition: ready for operation (used), functionality: fully functional, Gantry crane Bollegraaf 30 tons, 32 meters span, 10 meters lifting height Bodpfx Alsw S Ea Sjcelh

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Inclined belt sidewall height: 800 mm Weight: 16 t Bledpfsyu Stkox Alcjh

Condition: used, 1x gantry crane Working load: 2 x 10,000 = 20,000 kg Span: 24 m Cantilever: 1 x 3 m Lifting height above rail: approx. 8 m Bsdpjyx Dyfefx Alcelh Hook travel: 8 m Radio control Complete with crane rail

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. The machines consist of; Sorting oi: 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Bjdpfx Aljwq D Dnscelh Platform Cage ladder 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: excellent (used), Catalogue number 7937 Bjdpfxjy Tw Sks Alcolh TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: new, functionality: fully functional, Charger Condition: New Technical Condition: New Description: If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable rates. Part-exchange of Linde equipment is also possible – even without purchasing a unit from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes, and errors. Bsdpfxsywpk To Alcelh

Condition: used, Three-phase motor, electric motor -Power: 40 kW -Speed: 1455 rpm -Shaft: Ø 60 mm -Construction: B3 -Protection class: IP 23 Blsdpfxjcu Ervs Alcoh -Dimensions: 860/640/H580 mm -Weight: 390 kg

Condition: good (used), Robopac Pack 6050A Shrink Tunnel with Sealer Semi-automatic shrink wrapping machine. Made in Italy. Year of manufacture: 2019. The machine is in very good condition, ready for production. Bedpfxozaz Sye Alcjlh Used in virtually every industry: printing, cosmetics, confectionery – wherever you want to elegantly package your goods. Semi-automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel. Sealing dimensions: 600x500mm Maximum height: 240mm Weight: 450kg Power supply: 380V Installed power: 7.4kW Capacity: approx. 900 pcs/h Includes take-up rollers.

Condition: new, Professional submersible pump from the renowned German manufacturer Brinkmann Pumps. Designed for continuous operation in CNC machine tools, cooling systems, filtration units, and industrial liquid transfer systems. The pump is brand new, in excellent visual and technical condition. Supplied with operating manual and original packaging. Technical data: • Manufacturer: Brinkmann Pumps • Model: TA160/550-AX+181 • Power: 0.63 kW / 0.85 HP • Supply: 3~ / three-phase • Voltage: 230/400 V • Frequency: 50 Hz • Current: 2.63 / 1.52 A Bjdpfsy Ruy Tjx Alcelh • Speed: 2830 rpm • Power factor Cos φ: 0.76 • Insulation class: F (155°C) • Efficiency class: IE3 • Duty type: S1 • Connection thread: internal • Condition: new

Condition: excellent (used), KEMPER SP 150 A bowl for 150 kg flour with gear drive Blodpfx Ajghwiyolcsh

Condition: excellent (used), Debag Monsun Sticken oven, electric, for 12 trays (60x80 cm), with 2 rack trolleys. Overhauled 1 year ago, the oven is still in operation. Connection: 64 A, 32 kW. Bljdodc Eigjpfx Alcoh For further questions, please call my mobile or send an email. Thank you in advance!

Condition: used, functionality: fully functional, Orion KHA750A dry-run, oil-free vacuum pump Oil-free (dry scroll, i.e. dry scroll) pumps have a low final vacuum and enable high pumping speeds. Pumping capacity 145 l/min Pipe connection: RC 1/4 -- diam. 70mm Operating pressure: 8 - 48 kPa Air temperature: 0-40 °C, humidity: normal level (65 ± 20%). Several pieces in stock Bedpsufh Upefx Alcjlh

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Bedpfx Aljwtr Iyjcslh Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, mileage: 109,857 km, power: 125 kW (169.95 HP), first registration: 06/2018, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,440 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 2, total length: 6,500 mm, total width: 2,100 mm, total height: 2,380 mm, loading space length: 3,820 mm, loading space width: 2,040 mm, loading space height: 390 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, traction control, trailer coupling, = Additional options and accessories = - Halogen lamp - None - Manual - Rear view camera - Vinyl - Lane keeping assist = Notes = Configuration: 4x2, Payload: 1376 kg, Unladen weight: 2124 kg, Gross vehicle weight: 3500 kg, Towing capacity, unbraked: 750 kg, Towing capacity, center axle, braked: 3000 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: None, Electric windows, Color: Multi-colored, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Bluetooth, Engine power: 125 kW (168 hp), Fuel: Diesel, Euro: 5, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Roof rack: None, Rear closure: Tail lift, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat cover: Vinyl, Seat adjustment: Manual, ac tow hitch 3000 kg camera org NL, Tire type: Summer tires = Additional information = Axle configuration Tire size: 235/65R16 Bjdpfxjza Txfs Alcjlh Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 2,124 kg Payload: 1,376 kg GVWR: 3,500 kg Functional Height of the loading area: 92 cm Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1 Identification License plate: V-365-SP

Condition: good (used), mileage: 416,948 km, power: 132 kW (179.47 HP), first registration: 10/2017, fuel type: diesel, tire size: 235/75R17,5, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: air, total length: 8,450 mm, total width: 2,550 mm, total height: 3,220 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed fifth wheel - Halogen lamps - Short cab - Manual adjustment - Radio/cassette - Rear view camera - Lane departure warning system - Fabric upholstery = Notes = Bjdpfoycp Uhjx Alcjlh Number of axles: 2, Configuration: 4x2, Unladen weight: 4,675 kg, Gross weight: 10,000 kg, Total tank capacity: 200 liters, Fifth wheel: Fixed, Number of differential locks: 1, Suspension type: Full air, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Multicolor, Heated mirrors, Rear view camera, Lighting type: Halogen lamps, Lane departure warning system, Air conditioning, Heated seats, Bluetooth, Engine power: 132 kW (177 hp), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 6, Power steering, ABS, ASR, Starter battery, Body year: 2017, System length: 81 cm, Central locking, Seat configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual, WB 450 / FULL AIR / AIRCO / TÜV 10-2026, Spare wheel, Spare wheel tread: 12% = More Information = Transmission Transmission: ZF, 6 gears, automatic Axle Configuration Tire size: 235/75R17.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steering; left tire tread: 7 mm; right tire tread: 8 mm Axle 2: Twin tires; left inside tread: 7 mm; left outside tread: 7 mm; right inside tread: 6 mm; right outside tread: 7 mm Weights Unladen weight: 4,675 kg Payload: 5,325 kg GVW: 10,000 kg Functional Loading platform height: 101 cm Maintenance APK (Dutch roadworthiness test): valid until 10.2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands from various years and price classes. Why buy from Kleyn Trucks? Simple! • Large, constantly changing stock • Recognizable quality • Good pricing • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The safety of 'recognizable quality' • And more.... Please visit our website for special offers and our complete stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Siemens 6SL3120-1TE15-0AA4 Single Motor Module Version: B SN:T-FO6013590, used, in good condition, 100% functional, delivery scope as shown in the photos. Bjdpfx Ajx Euz Hjlcelh