Used Bjm Es 789 for sale (7,351)

Year of construction: 2008, condition: used, Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle -Spare part comes: from a machining center BJM type ALBZ-145 -Number: 1 piece angle milling head Iisdpfxsfbnkbs Aatjf -Recording output: HSK -Milling head: completely rotatable/pivotable -Transport dimensions: 1080/380/H435 mm -Weight: 246 kg

Condition: ready for operation (used), Heidenhain ST 3077 incremental measuring probe, ID 511 398-01, measuring probe without tip, 140mm, cable length 1.5m, serial number 37890553T. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Iedozt H E Repfx Aatsif

Condition: ready for operation (used), Grundig 665RI length measuring gauge, model ML 770 mm, serial number: 78-95201, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iiedei Eacwjpfx Aatjf

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Iedjzb Dr Sjpfx Aatoif Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: used, maximum load weight: 36,140 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS,

Condition: used, maximum load weight: 35,480 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 05/2026, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment: Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as a UNP profile, wear plate approx. 8 mm, neck height at the front approx. 130 mm. Coupling device: 2-inch kingpin. Underrun protection: bolted design, according to EC. Side underrun protection: according to EC, made of aluminum profiles, anodized. Saddle supports: 2 x 12 t saddle supports with leveling foot and single-sided operation on the right-hand side. Axles: 3 x 9 t air suspension axle unit, disc brakes 22.5". Total stroke approx. 180 mm, raising and lowering device via rotary slide valve. Braking system: Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front crossmember, without connection line to the tractor unit. Tires: 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice. Tire pressure monitoring system (TPMS) via CAN bus system of the EBS. Fenders: according to EC. Spare wheel holder: none. Load securing: - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t - 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t - In the outer frame, holes for attaching lashing straps are provided every approx. 400-600 mm. Front wall: Reinforced steel construction, fixed, approx. 1,400 mm high. Internally lined with approx. 9 mm screen-printed material (approx. 1,250 mm high). Floor: approx. 28 mm Z-hardwood floor recessed in the outer frame with galvanized omega steel profiles. Lighting system: according to EC, 24 Volt, with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. Lane departure warning lights LED. 1x15- and 2x7-pole plug connections on the front crossmember. Equipment: - 2 wheel chocks with holder - Warning signs ECE 70 - Holder for rotating beacon, incl. rotating beacon - 2 rubber impact buffers at the rear - Access ladder at the rear right, foldable and extendable (without platform) - 1 open box made of perforated sheet, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles. Painting: Front wall: RAL 3002 carmine red. Chassis: hot-dip galvanized. Outer frame: hot-dip galvanized + RAL 3002 carmine red. Center beams: RAL 3002 carmine red. SSV: Aluminum, anodized. Underrun protection: white (RAL 9016 traffic white). Components: galvanized/KTL black. Rims: silver. Outline marking: complete, yellow. Incl. special accessories. First axle liftable, with fully automatic, load-dependent lift control. 10 pairs of stake pockets in the outer frame, evenly distributed. 4 rows of stake pockets transverse to the loading area. 20 stakes made of galvanized tube 80/50, total length approx. 1,200 mm. Inside the front wall, a magazine for 20 stakes. 5 x 25-mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stakes. Side board and stake magazine: under the chassis, left and right, sliding rails for side boards and stakes. Container locks for 1 x 40' and 2 x 20' containers, rear-flush. Container locks for 1 x 20' container in the center. Work lights on the lamp carrier (switched via reverse gear). 2 Iiodpezrq U Hofx Aatsf

Condition: used, axle configuration: 2 axles, first registration: 08/2021, Equipment: ABS, 2-axle semi-trailer, low-loader, Manufacturer: ES GE 2STL, first registration: 08/2021, 2 steerable axles, Access ramps, powerful winch, toolboxes, remote control, and more. In very good condition. Ijdezml Abepfx Aateif Price: €41,900.00 plus VAT (19%). Subject to errors and prior sale.

Condition: good (used), Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve Isdjfcr I Depfx Aateif -Spare part comes from a BJM machining center type ALBZ-145 -Control unit: R 480 piece -Solenoid valve: Ø 820 pieces -Solenoid valve: Ø 820 1 piece -Moisture separator -Price/Sale: complete -Dimensions: 275/155/H230 mm -Weight: 4.7 kg

Condition: good (used), Control unit, control panel, operating panel, keyboard, screen, control Iiodpfx Ajd Siknjatsf -Control origin: from a BJM machining center type ALBZ-145 Manufacturer: BJM Beckhoff -Dimensions: 603/418/H100 mm -Weight: 16.2 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes from a BJM machining center type ALBZ-145 Iiodpefcr I Eefx Aatof -Intake: HSK40 -Tool changing system: CTM42 DO 12P3 400 -CUT changer: CUT42-V-90-60-D VX -RIG changer: RIG 06-12-P003 VX VCP IN DA -Drive engines: MGM -Dimensions: 730/700/H450 mm -Weight: 160kg

Condition: used, Servo motor, electric motor, DC motor Iisdpfxofnk I Ie Aatef -Servo motor: comes from a machining center BJM type KF-10 -Power motor: 1.45 kW/voltage: 560 V -Max. Speed: 3000 rpm -Torque: 6.3 Nm -Brake: 24 VDC -Gearbox: manufacturer Atlanta type 5883109 i = 9.25 -Hollow shaft: Ø 25 x 120 mm -Dimensions: 530/200/H175 mm -Weight: 20 kg

Condition: used, Servo motor, electric motor, DC motor Ijdpfx Aajfcqrusteif -Servo motor comes: from a machining center BJM type ALBZ-145 -Max. Speed: 2500 rpm -Power: 4.55 kW -Torque motor: 23.2 Nm -Construction: B5 -Dimensions: 320/138/H180 mm -Weight: 16.4 kg

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle, linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, servo motor, electric motor, DC motor -Spare part comes: from a machining center BJM type ALBZ-145 -Travel: 2430 mm -Servo motor: manufacturer Beckhof type AM3074-0Q40-0000 Iiedpofcw T Dsfx Aatof -Max. Speed: 2500 rpm -Power: 7.35 kW -Torque motor: 48.8 Nm -Number: 2x rails available -Price: complete -Dimensions piece: 3740/200/H405 mm -Transport dimensions: 3740/400/H405 mm -Weight complete: 444 kg

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes: from a machining center BJM type ALBZ-145 Iodpfxjfcr Nbe Aateif -Tool change system -CUT changer -RIG changer: RIG 06-12-P003 VX VCP -Drive motors: MGM -Dimensions: 1400/950/H830 mm -Weight: 380 kg

Condition: new, ProMoinent BT4B0708PPE2000UA101000 dosing pump, serial number: 2018177893 – cable length: 1.50 m, unused, 100% functional, scope of delivery as shown in the photos. Iodpszg Scbefx Aatoif

Condition: new, maximum load weight: 35,510 kg, overall weight: 43,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm Fifth wheel coupling: * 2-inch kingpin Underrun protection: * Bolted design, according to EC Side impact protection: * According to EC, made of aluminum profiles, anodized Kingpin supports: * 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side Axles: * 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5" * Total stroke approx. 180 mm, raising and lowering device via rotary slide valve Braking system: * Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle Tires: * 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice * Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS Fenders: * According to EC Spare wheel holder: * None Load securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * In the outer frame, holes approx. every 400-600 mm for attaching lashing straps Front wall: * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles Lighting: * According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights * Lane-keeping lights LED Ijdpfx Aajzhd Ncsteif * 1x15- and 2x7-pole connector sockets on the front cross member Equipment: * Warning signs ECE 70 * Holder for rotating beacon, including rotating beacon * Foldable and extendable access ladder at the rear right (without platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Painting: * Front wall: RAL 5010 azure blue * Chassis: Hot-dip galvanized * Outer frame: Hot-dip galvanized + RAL 5010 azure blue * Crossbars: RAL 5010 azure blue * Kingpin supports: Aluminum, anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of crossbar pockets in the outer frame, evenly distributed * 4 rows of crossbar pockets transverse to the loading area * 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm * Inside on the front wall, a magazine for 20 pieces of plug-in crossbars * 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars * Side board magazine under the chassis left and right * Sliding rails for side boards * Container locks for 1 x 40" and 2 x 20" containers, flush at the rear * Containe

Condition: new, maximum load weight: 14,910 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 6,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis frame: * Welded construction made of high-quality steel with cross members and an outer frame. Ramp storage: * Ramp storage between the longitudinal beams. Under-run protection: * Rigid under-run protection in accordance with ECE R58-03 * Side and under-run protection in accordance with EC regulations. Front support: * Front support with two-stage crank supports (2 x 12 t). Rear support: * Rear support with lockable drop supports. Axles: * 2 x 10t SAF axles with drum brakes, low-maintenance air suspension axle, lifting and lowering device with a total lifting stroke of approx. 180 mm, asbestos-free brake pads. Axle with a load capacity of 10,000 kg. * Compressed air tank, steel * Wheel fastening by center centering Tires: * Tires 235/75 R 17.5, on steel disc wheels, 8-ply, manufacturer of our choice * Tire pressure monitoring system, which indicates low tire pressure. Splash guard: * Plastic mudguards, splash flaps Load securing: * 6 pairs of lashing recesses designed for 8 t, evenly distributed on the outer frame * Beveled and perforated outer frame for attaching lashing hooks when the side boards are closed * Stake pockets: 3 pairs of welded stake pockets, internal dimension for stakes approx. 80 x 50 mm, evenly distributed. Braking system: * Automatic, load-dependent, two-circuit pneumatic braking system in accordance with EC regulations with spring-loaded parking brake (incl. 1 release valve), EBS connections for air (red/yellow), corrugated flexible lines for trailer. Floor: * Hardwood floor approx. 30 mm, with Z-profile boards. Front wall: * Designed as a removable side board, approx. 600 mm high. Lighting/electrical system: * Electrical system: 24-volt lighting system in accordance with StVZO * Multi-chamber rear lights, completely LED, with integrated ballast and flashing side marker lights. * On the trailer, additional position lights. * Position lights at the front, white (required for approval in EU countries and Switzerland). Electrical system: * Trailer connections: 2x7-pole * Trailer connection: 1x15-pole * Mounting plate for supply lines on the front cross member, lines permanently mounted, without separate connections, supply connections on the left. Accessories: * Wheel chocks in accordance with StVZO. * Plug-in revolving warning light at the rear. * Delivery of an additional 40 mm towing hitch (GVWR max. 13,500 kg). Painting: * Coating of undercarriage: galvanized + powder-coated * Chassis frame with high-quality hot-dip galvanizing and subsequent powder coating for optimum corrosion protection; the surface may show the ripple structure of the hot-dip galvanizing. * Coating of body parts: standard Color: Iiodpfx Aezgqncjatjf * RAL 3002 carmine red * Center and corner profiles: KTL + powder coating: RAL 3002 carmine red * Side boards: RAL 3002 carmine red * Drawbar: hot-dip galvanized * We would like to point out that, due to the size of the chassis and the selected coating process (hot-dip galvanizing), surface imperfections may occur. These include, for example, zinc pimples, run-ons, zinc whiskers, distortion, etc. We have no influence on this, and it will not constitute a legal defect with regard to the appearance at a later date. Contour marking: * Yellow lateral reflective contour marking. * Yellow ref

Condition: used, Manufacturer: Tennant Company (USA) Model: M20 Type: Industrial Scrubber-Sweeper (combination machine) Power source: Diesel, LPG, or Battery (depending on version) Cleaning Width: - Main brushes: ~1020 mm (40 inches) - With side brushes: up to 1400 mm (55 inches) Solution Tank Capacity: 303 liters Recovery Tank Capacity: 360 liters Iedpowf E Drefx Aatjif Working Speed: ~8 km/h Approximate Weight (unloaded): ~2,177 kg Approximate Dimensions: - Length: ~2460 mm - Width: ~1220 mm - Height: ~1430 mm

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Side tables Chrome table surface Iedpfxjzmu Nke Aatsif Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 3093-002, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, BJM FTB-100K – Automatic PVC Profile Cutting Center For sale: BJM FTB-100K automatic profile cutting center, designed exclusively for cutting PVC profiles. The machine does not have a milling function. The machine was previously used for cutting Kömmerling 70, 76 MD and 88 MD PVC profiles. The machine is currently packed and stored. It was taken out of production because a new machining center with milling capabilities was purchased. Technical specifications Manufacturer: BJM Model: FTB-100K Year of manufacture: 2003 Machine No.: 3093-002 Power supply: 400 V, 3-phase Saw blade diameter: 500 mm Maximum profile width: 120 mm Maximum profile height: approx. 140 mm Cutting angles: 45°, 90° and 135° Number of saws: 3 Maximum profile length: 6,500 mm Minimum finished part length: 280 mm Input: XML cutting list files Labelling: Automatic label printing is available The machine is suitable for automated cutting of PVC window and door profiles and can process cutting lists supplied as XML files. Isdpfx Aoztv Nfjatsif The machine is sold as a used machine and is currently stored in packed condition.

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. Iodpfx Aju Ibuweatoif The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: new, maximum load weight: 37,350 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous crossmembers for high ground and point load capacity, with a heavy-duty outer frame. * Loading platform at the rear as a steel welded structure with two welded-in tracks made of 5-hole steel sheet (hole pattern System Lohr/Rolfo) with a length of approximately 2,250 mm, hydraulically lowerable by approximately 350 mm. * Integrated loading platform at the rear of the vehicle, approximately 1,500 mm, hydraulically extendable as a steel welded structure with 5-hole steel sheet (hole pattern System Lohr/Rolfo) cover, light fitting, and 2 ramp compartments and ramp supports. * The drive and control of the rear section are provided by an electric hydraulic unit mounted in a stainless steel box on the left of the chassis, with a radio remote control. * Power supply via the vehicle battery of the towing vehicle. * NATO socket on the front wall, without connecting cable to the tractor unit. Fifth wheel coupling: * 2-inch kingpin, replaceable from below. Under-ride protection: * According to EC, permanently mounted. Support legs: * 2 x 12 t support winches with a 2-speed gearbox. Axles: * 3 x 10 t air-suspended axle unit, manufacturer SAF with disc brake approximately 370 x 45 mm, ABS, wheel connection 10-hole center-mounted ET120, total stroke of the air suspension approximately 200 mm, of which lifting approximately 140 mm and lowering approximately 60 mm, control of the air suspension via hand control with stop function. Steering axle: * 3rd axle as a trailing steering axle with manual and automatic reverse steering lock. Lift axle: * 1st axle automatically liftable, also switchable via operation on the chassis frame or via PIN 12 of the light socket. Tires: * 6 tires, 445/45R19.5, manufacturer of our choice, mounted on rim 14.00X19.5, 10-hole ET120. Iiodsy Up S Sspfx Aatef Fenders: * According to EC, 1/4 PVC fender in front of and behind the wheels of the 1st axle in front and behind, 2nd and 3rd axles in the rear. Tire chock holder: * None Braking system: * Two-line braking system according to EC with EBS, automatic load-dependent control. * Spring brake accumulator as parking brake acting on 2 axles, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the tractor unit. Manufacturer Wabco. Lighting system: * According to EC, 24 volts, multi-chamber rear lights, license plate lights, LED side marker lights, LED position light white in front and LED side marker lights at the rear, 15-pole socket and 2x7-pole sockets permanently mounted on the front crossmember, without connecting lines to the tractor unit. Load securing: * 9 pairs of folding lashing rings evenly distributed, tensile force approximately 8 tons. * 7 pairs of folding lashing rings evenly distributed, tensile force approximately 2.5 tons. * 2 pairs of folding lashing rings at the rear of the vehicle, tensile force approximately 2.5 tons. * In the outer frame, holes for lashing straps at approximately 500 mm intervals. Lashing stakes: * 16 lashing stakes approximately 100/40 mm, approximately 800 mm usable length. Lashing stake pockets: * 8 each on each side embedded in the outer frame. * 4 rows of stake pockets transverse to the loading area. Fl

Condition: used, axle configuration: > 3 axles, first registration: 04/2007, total length: 13,400 mm, total width: 2,550 mm, suspension: air, tire size: 205/65R17.5, wheelbase: 9,800 mm, color: white, Year of construction: 2007, Equipment: ABS, Saf axle. 2 x trailing steering axles. Extendable. Lifting roof. Sliding roof. Loading bed length: 910 cm. Floor height: 80 cm. Neck length: 390 cm. = Further information = Axle configuration: Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Iisdjy N Aw Rjpfx Aatof Rear axle 1: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 2: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 3: Twin tires; Left inner tread: 30%; Left outer tread: 30%; Right inner tread: 30%; Right outer tread: 30% Rear axle 4: Twin tires; Left inner tread: 40%; Left outer tread: 40%; Right inner tread: 40%; Right outer tread: 40% Weights: Unladen weight: 9,940 kg Payload: 37,660 kg Gross vehicle weight (GVW): 47,600 kg Identification: Type number: 4STL48 / 4 AXLE / SLIDING ROOF / = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Russian spoken. We do our best to provide correct information, but no rights can be derived from the information provided.

Condition: used, Year of construction: 2007, Extendable superstructure: Yes Please contact Theo Lelie for more information Iodpfxeyrtm Hs Aatjif ES-GE 6.SOU-4H-1N 6 axle semi / stepframe lowloader 12-2007 Airsuspension Last 4 axles Hydraulic steert Extra remote steering (by wire) First 2 Axle’s are lift axles Its own 24V electro-hydraulic powerpack Loadingfloorlenght 11.000 mm + 6.000 mm extendible Width 2.550 mm + side extensions till 3.250 mm Weights in kg 6 x 10.000 kg axle load 25.000 kg fifth wheel load 84.000 kg total weight Ca 17.080 kg own weight Ca 67.920 kg loading capacity ABS

Condition: used, machine/vehicle number: W09BLH3556EE32123, Year of construction: 2006, Please contact Theo Lelie for more information Iiedpjy Dgkqefx Aatof