Used Binder Rrk for sale (382)

Condition: used, Year of construction: 2015, machine/vehicle number: 14967, heating capacity: 1,650 kW (2,243.37 HP), temperature: 165 °C, tank capacity: 4,390 l, operating pressure: 18 bar, Equipment: documentation/manual, hot water, Hot water boiler operating on biomass. Hodpjzb Iy Hofx Abpjp

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Hodpfxsyhlrmj Abpop

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system maximum thermal output up to 850 kW Hedpfxsy Dfd Ns Abpop suitable for dry material

Condition: excellent (used), Incubator Type: Binder CB 210 CO² / 9140-0013 Technical data Temperature range: 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Internal volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Hsdpfszgbtcex Abpsp We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Binder incubator. Key features: Model BD 115 | Standard incubator with natural convection Technical data BD 115 External dimensions: Width (net) 835 mm Height (gross, including feet/casters) 705 mm Depth (net) 645 mm Depth (gross, including door handle and exhaust pipe) 750 mm Wall clearance (rear, minimum) 100 mm Wall clearance (side, minimum) 160 mm Exhaust pipe, outer diameter 52 mm Doors Number of doors 1 Internal dimensions: Width 600 mm Height 480 mm Depth 400 mm Internal volume 115 liters Steam space volume 142 liters Shelves Number of shelves 0 Maximum number of shelves 5 Maximum load per shelf 20 kg Hedpfx Ajzgaicobpsp Permissible total load 50 kg Weight: Weight (empty) 61 kg Temperature data Temperature range: 5°C above room temperature to 100°C Temporal temperature deviation at 37°C ± 0.1 K at 50°C ± 0.1 K Spatial temperature deviation at 37°C ± 0.4 K at 50°C ± 0.8 K Heating time to 37°C 70 minutes to 50°C 90 minutes Recovery time after 30 sec door open at 37°C 10 minutes at 50°C 12 minutes Electrical data: BD115-230V IP 20 Rated voltage (+/-10%) at 50 Hz mains frequency 230 V Rated voltage (+/-10%) at 60 Hz mains frequency 230 V Type of current 1N~ Rated power 0.20 kW Type: BD 115 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Binder MKFT 720 E3.2 Temperature and Humidity Chamber Device Data Manufacturer: Binder Type: MKFT 720 E3.2 Year of Construction: 2017 Article Number: 9020-0288 Design: Temperature and Humidity Chamber Cooling: Air-cooled Description Used temperature and humidity chamber from Binder. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Application in industry, research, development, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Internal volume: approx. 734 liters Max. total load: 160 kg Max. load per shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. operating pressure: 29 bar Performance Data Temperature Temperature deviation over time: 0.1 to 0.5 K Temperature deviation spatially: 0.3 to 2.0 K Hodoy H H Smspfx Abpop Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data Climate Climate range: +10 °C to +95 °C Humidity range: 10 % to 98 % RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Equipment Touch control panel Program and constant operation Observation window Stainless steel test chamber Internal lighting Cable entry Movable on rollers Robust industrial design Weight approx. 635 kg Scope of Supply Binder MKFT 720 E3.2 Temperature and Humidity Chamber Scope of supply as shown in the pictures Functional testing Refrigerant service Leak test Test run with protocol Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Device Data Manufacturer: Binder Hedpfjy H Hvlsx Abpep Type: MK 115 E3.1 Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber for professional heat and cold tests in industry, research, development, and quality assurance. Hodpfx Absy Nic Hjpop The Binder MK series temperature test chambers are particularly suitable for cyclic temperature tests and reproducible tests under defined environmental conditions. The test chamber enables temperature tests in the range of -40 °C to +180 °C and represents an efficient alternative to individual custom solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x feedthrough Ø 70 mm 1 door 2 shelves standard / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~ Weight: approx. 320 kg For your safety as a buyer: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Optical condition according to pictures Normal storage and signs of wear present Important note: All information has been compiled to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Sinus magnetic clamping plate, 380x150 mm, sine table/angle table Manufacturer: Binder Magnete Type: 0011817C1 Hsdpfozhrffox Abpop In very good condition.

Condition: excellent (used), Binder FD 53 Drying Oven / Heating Cabinet Manufacturer: Binder Type: FD 53 Year of manufacture: 2014 Made in Germany Drying oven / heating cabinet with forced air circulation for laboratory, research, quality assurance, material testing, and industrial applications. Technical data Internal volume: 53 liters Temperature range: approx. +5 °C above ambient temperature to 300 °C Internal dimensions (W x H x D): approx. 400 x 400 x 340 mm External dimensions (W x H x D): approx. 635 x 620 x 690 mm Load per shelf: 15 kg Maximum total load: 40 kg Hodpozcwxzsfx Abpep Empty weight: approx. 44 kg Power connection: 230 V Frequency: 50 / 60 Hz Rated current: 5.3 A Rated power: 1.2 kW Protection class: IP20 Equipment Forced air circulation system Digital temperature display Electronic temperature control Safety temperature limiter according to DIN 12880 Stainless steel interior Multiple shelf levels Robust laboratory design Inspection / Calibration DGUV V3 inspection performed on: 28.07.2023 Calibration performed on: 28.07.2023 Inspection and calibration stickers are attached to the device. Condition Used equipment. Device can be switched on, temperature display is active. Signs of wear and tear due to age and use. Optical condition as shown in the pictures. Scope of supply: see pictures. The table shown in the pictures is not included in the sale. Shipping possible. Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. Hedpfx Abezg Dx Uspop The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: ready for operation (used), Binder 86 61111H03 Electromagnetic brake 24 VDC A.Nr. 2821/133,used, good condition, 100% working, scope of supply acc. photos Hodepnplujpfx Abpep

Condition: ready for operation (used), Binder 86 61109H25, Serial No. 70100971/M2, 24 VDC, Brake. Serial number: 050008820, used, in good condition, 100% functional. Scope of supply as shown in the photos. Hodezbw Awspfx Abpsp

Condition: ready for operation (used), Binder 86 61104P01 Brake 5193503650, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hodji D T I Iopfx Abpsp

Condition: ready for operation (used), KUKA rotor with binder 86 61104H23 brake for 1FK7034-5AZ91-1ZZ9-Z S09 motor, the screw in the thread of the rotor is torn off, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Hodpfou Tm E Nsx Abpop

Year of construction: 2018, condition: excellent (used), functionality: fully functional, BINDER MKF240 Climate Test Chamber – 247 Liters | -40 °C to +180 °C | 10 % to 98 % RH For sale is a high-quality Binder MKF240 Climate Test Chamber in well-maintained condition. The unit is designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. With an internal volume of approximately 247 liters, a temperature range of -40 °C to +180 °C, and a humidity range of 10 % to 98 % RH, the MKF240 is ideally suited for environmental simulation, temperature cycling, aging studies, material testing, and reliability testing. The stainless-steel interior and efficient air circulation system ensure uniform temperature and humidity distribution throughout the chamber. The integrated viewing window allows continuous observation of test specimens during operation. Technical Data Manufacturer: Binder GmbH Model: MKF240 Type: Climate Test Chamber Temperature Range: -40 °C to +180 °C Humidity Range: 10 % to 98 % RH Internal Volume: Approx. 247 Liters Stainless-Steel Interior Dynamic Air Circulation System Viewing Window Programmable Controller Made in Germany Applications Electronics Industry Automotive Industry Aerospace Industry Material Testing Research & Development Quality Assurance Hsdpfxozdqyto Abpsp Reliability and Aging Tests Key Benefits ✓ Combined temperature and humidity testing ✓ Precise environmental control ✓ Excellent temperature and humidity uniformity ✓ Robust industrial construction ✓ Ideal for laboratory and production environments Condition The unit is in good used condition. Inspection and functional testing are welcome by appointment. Additional photographs and technical information are available upon request.

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum fuse rating: 16A Frequency: 50/60Hz Electrical connection power: 4.5kW Temperature range: +12°C above ambient temperature to 300°C Spatial temperature deviation at 150 °C: ± 2.0K Temporal temperature deviation at 150 °C: ± 0.6K Heating time to 150 °C: 25 min Recovery time after 30 s door opening at 150 °C: 6 min Air exchange rate at 100 °C: 5x/h Internal volume: 741 l Maximum load per insert: 45 kg Maximum total load: 315 kg Energy consumption at 150 °C: 800 Wh/h Maximum number of inserts: 16 External dimensions: Width: 1,165 mm Height: 1,590 mm Depth: 870 mm Internal dimensions: Width: 1,000 mm Height: 1,300 mm Depth: 570 mm Important note: The wheels are installed/included. Hedpfxsxzukke Abpjp

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Hjdpfx Aoy H I Ngobpjp Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industrial settings, research, development, and quality assurance. The temperature test chambers from Binder’s MK series are particularly suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature testing within a range from -40 °C to +180 °C, providing an efficient alternative to custom-built solutions. Technical specifications: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Hedpfx Aoy Nicmobpep Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to a maximum of 6 shelves possible Electrical data: Rated voltage: 400 V Line frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of delivery: As shown in images Viewing by appointment possible. Loading can be arranged. Sale without warranty. (Specifications and technical details subject to change and error.)

Condition: used, 2½-deck screening machine Screening area: approx. 1,900 x 6,500 mm Without drive (power requirement approx. 18.5 kW) Hedpjwwr Eyjfx Abpop

Condition: good (used), Year of construction: 2019, Manufacturer: BINDER Hsdpfszbatfsx Abpop Year of manufacture: 2019 Type: ES/DD2500x5 Screen length: approx. 5,000 mm Screen width: approx. 2,500 mm Transport dimensions: 5,575 mm length x 3,000 mm x 1,930 mm

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm Hsdpeu N Dy Sefx Abpsp *

Condition: used, Technical details: Length: 800 mm width: 315 mm Hedpfeu N D Naex Abpjp voltage: 110 V clamping surface area: 795 x 315 mm current: 1 A weight of the machine approx.: 130 kg dimensions L x W x H: 0,85 x 0,35 x 0,09 m Magnetic clamping plate Magnetic strips 18x, width 20mm, distance 40mm *

Condition: new, functionality: fully functional, machine/vehicle number: SBT 2057, Year of construction: 2018, 2-deck screening machine 6000 x 1600 x 2000 mm. This machine was purchased by us in 2018 but has never been used. Current screen deck configuration: upper deck equipped with PU screen with 60 mm aperture, lower deck is a flip-flop screen for separation down to 4 mm. Delivery is complete with drive line, spring supports, and springs. Hodeulf Dpjpfx Abpep

Condition: good (used), FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Hsdpjzday Djfx Abpjp Weight: 186 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.