Used Behringer Gmbh Hbm540A for sale (68,410)

Condition: new, functionality: fully functional, power: 26 kW (35.35 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 630 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 200 rpm, rotational speed (min.): 20 rpm, total height: 2,700 mm, total length: 2,650 mm, total width: 4,385 mm, overall weight: 6,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the High-Performance Bandsaw HBM540A SpeedCutting Technology (optional) By combining SC-Performance saw band guides, a high-performance coolant system, dynamically controlled feed rate, and a specially optimized auto-feed control, you can achieve maximum performance and tool life from the saw band used. Prepared for Automation A powerful sawing machine concept places high demands on material handling. The high-performance bandsaw automatons of the HBM series are often configured as automated sawing centers. Therefore, the machines are already equipped in the basic version to connect extensive peripherals. Servo Feed System The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter idle times and more precise feed rates. Your advantage: higher cutting performance and longer band life! Sensitive Behringer Cutting Pressure Control increases the cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the industrial saw to the changing material cross-sections. Due to its arrangement directly at the back of the saw band, the system regulates quickly and precisely. Optimal Chip Removal The highest cutting performance of the industrial saw places high demands on chip removal. The wide, funnel-shaped machine stand allows for free chip flow into the underlying chip conveyor with an integrated coolant tank. The discharge height of 800 mm or optionally 1,200 mm allows the use of large chip containers. Economical Use of Carbide Saw Bands due to the robust design of the industrial saw, the use of the latest servo technology, and well-planned chip removal. Precise Guide System in Portal Design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and maximum service life of the bandsaw. Hnsdpfx Absz Rzq Iekeu Band-Guiding Parts Made of Gray Cast Iron are made by Behringer and ensure vibration damping directly at the cutting interface, thereby increasing the tool life. Automatic Guide Arm Adjustment This means that the metal bandsaw offers optimal sawing results without adjustment effort - even with frequently changing material widths.

Condition: new, functionality: fully functional, total length: 1,385 mm, total width: 2,900 mm, total height: 2,150 mm, type of input current: three-phase, saw blade speed: 150 rpm, pivoting range: 45 °, input voltage: 400 V, overall weight: 1,600 kg, cutting range round steel at 45°: 320 mm, cutting range round steel at 90°: 320 mm, warranty duration: 12 months, cutting range square steel at 45°: 320 mm, Equipment: rotational speed infinitely variable, Advantages of the miter bandsaw HBE320-523G Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the machine to the changing material cross-sections. Due to its arrangement directly on the back of the saw band, the system regulates quickly and precisely. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best miter cuts and maximum service life of the miter bandsaw. Micro-spray system When sawing profiles, tubes and solid material, the standard minimal quantity lubrication system delivers the best results. The saw band is constantly wetted with cutting oil via two nozzles. This guarantees a long service life of the saw band and a clean working environment. 3° inclination of the saw band enables higher cutting performance when sawing hollow profiles and beams and reduces burr formation. Customer-oriented sawing concepts Behringer offers complete system concepts with individual transport solutions, where everything fits together perfectly. We are a competent partner and provide comprehensive advice. Closed material table The closed table support facilitates work with the miter bandsaw. Even short sections can be easily transported in and out of the machine. Band-guiding parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Automatic guide arm adjustment Optimal sawing result without adjustment effort - even with frequently changing material widths. Feed control with servo drive optional Optionally, the saw feed is carried out by means of a ball screw and servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Electrically driven chip brush Hnsdpfx Absz Rzugjkju with BEHRINGER quick-change system for tool-free brush change. The special engagement angle protects the teeth of the saw band. Energy-efficient drive system More output with lower energy consumption. Protects the environment and your wallet.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,022 h, machine/vehicle number: 2621150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: VARIOBEND / ASCO, controller model: VARIOBEND Touch Control, working width: 6,400 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,300 mm, overall weight: 8,800 kg, total length: 7,200 mm, total width: 2,150 mm, total height: 1,600 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, year of last overhaul: 2025, Equipment: CE marking, angle stop, centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, We are offering for sale a VARIOBEND CNC sheet metal folding machine, manufactured by ASCO GmbH, Germany. The machine is currently owned by DIMING d.o.o., a company based in Slovenia, specializing in construction and sheet metal works. Hnodpfx Ajz Sz Txsbksu The machine is designed for precise and efficient sheet metal bending and is particularly suitable for roofing, façade construction and architectural sheet metal fabrication. Its robust construction and CNC-controlled operation ensure accurate, consistent and repeatable bending results, making it suitable for professional sheet metal processing. We are upgrading our machinery and investing in a newer-generation folding machine. The machine is available for inspection in Slovenia by prior arrangement.

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 350 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 1,820 mm, total length: 1,850 mm, total width: 2,300 mm, overall weight: 1,900 kg, table height: 800 mm, section length (min.): 10 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the HBE321A Dynamic bandsaw automat Band guide parts made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This noticeably increases the service life of the saw blades. Servo feed system The saw feed is controlled by a ball screw and a servo motor. This results in significantly shorter cycle times and more precise saw feeds. Your advantage: higher cutting performance and longer band service life! Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Auto-Feed-Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed and cutting speed. Electrically powered chip brush with a Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the metal bandsaw to the changing material cross-sections. Due to its arrangement directly at the back of the saw blade, the system regulates quickly and precisely. Automatic guide arm adjustment This ensures that the metal bandsaw provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Energy-efficient The use of modern drives and a special hydraulic system reduces energy consumption by approx. 30% compared to the previous model. Easy to operate Quick and easy operation of all functions of the metal bandsaw via touch control. Double clamping device offers process reliability, especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the metal bandsaw and fix both the raw material and the sections that have just been cut. Hnsdpoz Rwitefx Abkju

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 510 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 2,220 mm, total length: 2,000 mm, total width: 2,850 mm, overall weight: 3,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the HBE411A Dynamic bandsaw automaton Band guide components made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This allows for a noticeable increase in the service life of the saw blades. Auto-Feed Control Hnodpfjz Rwx Iox Abkju Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed rate and cutting speed. Energy efficient The use of modern drives and a special hydraulic system reduces energy consumption by approximately 30% compared to the previous model. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Electrically driven chip brush with Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Servo feed system The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Your advantage: higher cutting performance and longer blade life! Automatic guide arm adjustment This provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Easy operation Quick and easy operation of all functions of the bandsaw via touch control. Double clamping device offers process reliability – especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the bandsaw and fix both the initial material and the sections that have just been cut.

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Filling – Flange at the silo Hnjdpfx Ajz Nkt Nobkou Discharge – Conveyor screw with filter and rotary valve These are two silos – the package price is 15% lower than the stated individual price of a single silo.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) • Die diameter: 850 mm Hnjdpfsz I Tktjx Abkeu • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Hnodpfx Aez Iww Rebkou Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: good (used), Year of construction: 2013, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, Exo-Zell-EROWA automation with EDM314MF30+HSC600/5 Automation kit EROWA UPC table clamping system with adapter plate ITS/Powerchuck 10 pallet changing stations 150 electrode changing stations JMS-Certa identification Measuring machine DuraMAX EDM314MF30, year of manufacture 2013 Technical data: Travel ranges XxYxZ 905x705x455mm Workpiece table: 1150x850mm Tank size 1200x900mm Filling height of the work tank 500mm Distance table/electrode holder 250/700mm Workpiece weight max. 3000kg Dimensions WxDxH 2090x3416x3100mm Machine weight 7500kg Operating hours 10,000h Control interface MF30 Backflushing filter with dirt container Integrated cooling unit Automatic tank refill Extinguishing system Co² Smoke extraction Fire protection flap Erosion generator exopuls+60A Hnsdpfxsz Sp Hae Abkou C-axis 100°/min with holding brake, direct measurement Direct measuring system in all axes HSC600/5, 5-axis, year of manufacture 2008 Control iTNC530i Milling spindle HVC140, 42000rpm Technical data: Travel range XxYxZ 650x550x400mm Travel range BxC B105+/- C endless Table diameter 410mm Distance table/spindle nose 600mm Workpiece weight max. 200kg Rapid traverse 50m/min Rotational speed B/C 80/80°/min HSK40-E 60-position tool changer Oil mist extraction Minimum quantity lubrication Manual control panel with handwheel Adjustable air/cooling supply Kinematics optimization Calibration sphere for kinematics optimization Length compensation for all axes HIB cooling unit Measuring probe Renisaw OMP400 Calibration ring Performance acceptance test Transport Commissioning on site Training

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW Hsdpjz Hngmofx Abkjnu • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, spindle speed (max.): 24,000 rpm, Gravograph IS 6000 IQ – CNC engraving machine – approx. 500 operating hours Hnjdpfez D Htgox Abkju For sale is a very well-maintained Gravograph IS 6000 IQ with only approx. 500 operating hours. The machine is suitable for engraving and milling operations, for example, for the production of signs, lettering, and custom engravings. Machine data: Manufacturer: Gravograph / Gravotech Model: IS 6000 IQ Year of manufacture: 05/2016 Operating hours: approx. 500 Condition: used, very well maintained Equipment: Engraving software GS8-GRAPHIC incl. dongle Sturdy machine table with T-slots for workpiece clamping Matching base frame Wired hand control unit Extraction system on the machining head Spraying device 750 W high-frequency spindle kit for the IQ series according to the order confirmation from November 2017 The machine was purchased in December 2016. Its excellent condition and low usage with only approx. 500 operating hours are particularly noteworthy. Price: net 12,500 EUR Location: 09627 Bobritzsch-Hilbersdorf Availability: immediately If you are interested, we look forward to receiving your inquiry.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Hodpfxsz Ixc Io Abkjnu

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Hjdpfszytmzox Abksnu Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m Hsdpfx Ajznz Ezebkenu The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Year of construction: 2017, condition: excellent (used), Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows you to choose whether the cut is triggered mechanically (e.g., on the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the processing is extremely tool-friendly. The pipes remain almost completely dry and free of coarse contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging directly integrated). Due to two separate box output stations (rear sluices with sliding doors), the system automatically switches to the second station when a box is full. The removal of the finished KLT boxes takes place in parallel with the main operating time without machine downtime. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest changeover times in non-cutting separation Material-saving and free of contaminants Chip-free Easy to maintain No cooling and lubricating agents required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs are possible Hedpszw Ukcsfx Abkenu Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimped ends) Sensors & positioning: Optical sensors for the automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feed (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths using a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard and mouse Setup operation: Mobile Siemens Teach-In terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety polycarbonate windows Logistics / output Integrated box placement station 2 separate box output stations for rear removal via protected sluice systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in excellent optical and mechanical condition.

Year of construction: 2019, operating hours: 3,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10031325, This is a high-resolution NIR system capable of detecting particles in the 3 mm size range. Additionally, the machine is equipped with an electromagnetic detector that has a sensitivity of approximately 1.5 to 1 mm, depending on the metal type. Depending on the settings, it can sort positively or negatively. Hsdpfx Aozl Uzwobkonu Technical data: Belt width: 1024 mm Nozzle bar: 6.4 mm working width Upon request, complete documentation can be provided. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2013, The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace. Mains connection: 400 V Hnsdpfx Aboz Szaljkou Frequencies: 50 - 60 Hz power consumption: 1.5 A at 60 Hz engine power: 1,15 kW

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 16274986/1, functionality: fully functional, Multiripsaw for edging boards, max cutting height 125 mm, max passage 950 mm, el.power 75 kW operating panel, conveyors Hnsdpfx Ajz N Tfusbksu

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Hnedszmzbmepfx Abksu The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Hjdpfxsz Rn Dne Abkonu

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets Hnodpfx Aoz Agv Ujbkou - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. Hedpfxoz Agw Eo Abkjnu - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Hnjdpfx Aboz Ag Rrjkou - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Hnsdpfoz Ikzpsx Abkju Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. Hjdpfx Abjzqucfskenu With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.