Used Bbt Pressen E 15 for sale (78,035)

Condition: ready for operation (used), Year of construction: 1962, Eccentric press with black shield, Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Dimensions: W 800 x D 1200 x H 2200 mm Chsdju Rrrfjpfx Ac Tsb Weight 800 kg,

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment Chjdpeyc R Uijfx Ac Tsb 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Chsdpfx Aceyc R Nme Tsb

Year of construction: 2003, condition: used, 1 x Fulton upright boiler Model: 15 E Year: 2003 Chedpoyq Ni Uefx Ac Tob With water pump Located in Co.Donegal, Ireland *Buyers responsibility to remove, and supply relevant RAMs documentation*

Condition: excellent (used), Year of construction: 2015, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Z000071400101, total width: 1,400 mm, total length: 2,050 mm, total height: 2,150 mm, type of input current: three-phase, overall weight: 1,100 kg, Powerful industrial blower suitable for a variety of applications. The stationary fan with a 600 mm diameter can be used for cooling, ventilation, heat dissipation, or for displacing water mist and dust. The unit has four rollers and forklift pockets for loading. Electric motor power (blower): 15 kW Air flow rate: 33,000 m³/h Speed: 13.8 kW / 1470 rpm Electrical connection: 400 volts / 50 Hz / 32 amps Cable length: 5.0 m Chodpfewbfm Sex Ac Tob Pickup and inspection available in D-89188 Merklingen.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, torque: 115 Nm, controller manufacturer: Fanuc, total height: 2,750 mm, total length: 2,200 mm, total width: 2,360 mm, table width: 500 mm, table length: 900 mm, table load: 500 kg, overall weight: 6,400 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, Year of manufacture: 2013 CNC Fanuc Chedpfx Acezr Uq Ss Tob TABLE Table size: 900 x 500 mm Five T-slots: 18 H 8 mm Maximum permissible weight on the table: 500 kg WORKING CAPACITY X-axis: 700 mm Y-axis: 530 mm Z-axis: 560 mm Spindle nose – table surface distance: 150 / 710 mm Spindle axis – column surface distance: 550 mm SPINDLE Spindle diameter: 70 mm Spindle taper connection Big Plus: ISO 40 DIN 69871 Spindle speed: 50/12,000 rpm Spindle motor: 15/11 kW Maximum torque: 115 Nm FEED RATES Rapid traverse rates for X/Y/Z axes: 32 m/min Working feed rates: 20 m/min TOOL MAGAZINE Number of tools: 30 Tool taper: ISO 40 Maximum tool diameter (without adjacent tools): 76 / 125 mm Maximum tool weight: 7 kg MACHINE DIMENSIONS Height: 2,750 mm Footprint: 2,200 x 2,360 mm Weight: 6,400 kg Machine complete with: •Presetter •Probe •Vise •Tool cabinet •Instruction manuals and CE declaration

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device - Parallel holding for bending blade Chsdpfx Acjwgakve Teb - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) ==== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: used, Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Conformity certificate in 2001) Type : High viscosity paste mixer   Motor power : 15 CV - 11 KW Speed variation: mechanical Previous use : Paint 220 L and 440 L vessels Mixing tool: Ø 960 mm butterfly Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2040 mm Height in high position: 2880 mm Chodpfx Acozg Nf Ts Tjb Stroke: 840 mm

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: 1597, type of input current: three-phase, input voltage: 380 V, heating capacity: 25.5 kW (34.67 HP), ILLIG UA 150 E Thermoforming Machine + US 100 – Complete Package Description Complete ILLIG thermoforming and processing package consisting of two industrial machines, both manufactured in 1967. The package consists of an ADOLF ILLIG UA 150 E vacuum thermoforming machine together with an ADOLF ILLIG US 100 auxiliary processing machine. Both machines originate from the same production period and were used as part of a thermoforming production setup. 1. ADOLF ILLIG UA 150 E – Vacuum Thermoforming Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: UA 150 E Machine No.: 1597 Year of manufacture: 1967 Working / forming area: 1,500 × 1,000 mm Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 2.2 kW Heating power: approx. 25.5 kW Industrial vacuum thermoforming machine designed for forming thermoplastic sheet material. The machine is equipped with: Large 1,500 × 1,000 mm forming area Heating system Vacuum system / vacuum pump Adjustable forming controls Pressure and vacuum gauges Separate electrical control equipment Manual operating controls Chjdpfx Aszx Ergec Tsb Integrated working/forming table 2. ADOLF ILLIG US 100 – Auxiliary Processing Machine Manufacturer: ADOLF ILLIG Maschinenbau, Heilbronn, Germany Model: US 100 Machine No.: 536 Year of manufacture: 1967 Supply voltage: 220 / 380 V Frequency: 50 Hz Motor power: approx. 1.1 kW Band length: approx. 3,570–3,670 mm The US 100 is an auxiliary processing machine intended for secondary processing of formed components. It is equipped with a large movable working table, electrical drive, adjustable working elements, and separate electrical controls. Complete package Both machines are offered together as one complete package. The sale includes: ILLIG UA 150 E thermoforming machine ILLIG US 100 auxiliary processing machine Associated electrical/control equipment shown in the photos A quantity of unused old-stock plastic thermoforming sheet rolls is also available and can be supplied separately or included by agreement. The machines are currently installed/stored in Greece and are available for inspection by appointment. EXW Greece. Dismantling, loading, and transport are at the buyer's cost and responsibility.

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Chedpfx Acjp T T Hno Tjb Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Condition: good (used), Year of construction: 2011, 1x Geiger MidiLiner 15 Chodpfxezx D Igj Ac Tob Year of manufacture: 2011

Condition: used, Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Conformity certificate in 2001) Type : High viscosity paste mixer Chjdpfx Acex R Az So Tjb   Motor power : 15 CV - 11 KW Speed variation: mechanical Previous use : Paint 220 L tank Mixing tool: Ø 705 mm butterfly / cloverleaf type Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Condition: excellent (used), Year of construction: 2019, HSM V Press 1160 plus Pressing force 532 kN, opening width 1,195 m, opening height 0.65 m, drive power 4 kW, press type BP, dead weight 2.43 t, transport length 1.78 m, transport width 1.568 m, transport height 2.995 m, press type baler. Press immediately ready for use. Cjdpfx Aol Uvuksc Tohb

Condition: used, Year of construction: 1973, Manufacturer: Grenier - Charvet Model: E 15 Year: 1973 ( Conformity certificate in 2001) Codpfxjx R Azrj Ac Tohb Type : High viscosity paste mixer   Motor power : 15 CV - 11 KW Speed variation: mechanical Previous use : Paint 220 L tank Mixing tool: Ø 705 mm butterfly / cloverleaf type Vessel clamping: pneumatic   Vertical movement: hydraulic unit Height in low position: 2040 mm Height in high position: 2880 mm Stroke: 840 mm

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds Chedpju U Ey Isfx Ac Tob - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Rated power consumption 3000W (Cuprex high-performance motor), rated voltage 230V 50Hz, rated no-load speed 4050 rpm, milling head 15 x 115 x 30 mm, cutting depth 0-70 mm (83.5 mm), swivel range 0-60°, weight approx. 20 kg, cutting speed 31.8 m/s. Chsdpjzvyb Dsfx Ac Tjb

Condition: used, bore capacity in steel (diameter) 15 mm Csdeyf N Erjpfx Ac Tehb throat 220 mm bore stroke 80 mm 2 speeds 320 - 1600 U/min table-size 350 x 285 mm weight 125 kg dimensions 700 x 600 x 1500 mm Features: - Microdosing - Thread cutting M2-10

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Chsdezxrcrjpfx Ac Teb Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 1973, sheet width 1500 mm plate thickness 5 mm weight 3,8 t Chedpfezxt Trox Ac Tsb

Condition: used, Year of construction: 2009, turning diameter: 2,000 mm, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 1,345 mm, rotational speed (max.): 300 rpm, rotational speed (min.): 10 rpm, Equipment: documentation/manual, CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Chjdpfx Acozv T D Ej Tsb Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1976, Press force 2,500 kN Throat depth 450 mm Adjustable stroke 20 - 140 mm Max. ram adjustment 100 mm Csdpeyg Efdefx Ac Tohb Stroke rate 20 to 60 per min Machine weight approx. 19,000 kg Press overhauled in 1996 Further data and photos upon request

Condition: excellent (used), functionality: fully functional, mileage: 355,000 km, first registration: 12/1995, fuel type: diesel, overall weight: 10,000 kg, wheelbase: 3,690 mm, fuel: diesel, color: white, emission class: euro2, Year of construction: 1995, Equipment: air conditioning, airbag, crane, differential lock, fog lights, full service history, IVECO EUROCARGO 100 E 15 truck 3-sided tipping body PM 8024 crane with hydraulic extensions Year 12/1995 Body length: 4,200 mm Wheelbase: 3,690 mm Overall length: 6,600 mm Gross weight: 10,000 kg Payload: 4,200 kg 6-speed manual gearbox Leaf spring suspension Differential lock Air conditioning ABS Electric mirrors and windows Chjdpfx Ajy Aki Ioc Tsb Radio 355,000 km.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 131 720, total height: 4,120 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 2,600 mm, total length: 3,600 mm, drop-through hole in table: 1,200 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,200 mm, control cabinet length: 3,600 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 160 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 650 mm, distance between stands: 1,600 mm, overall weight: 35,000 kg, control voltage: 24 V, input frequency: 50 Hz, ATTENTION: Chedpfx Acozrxbuj Tjb The machine is currently partially disassembled. The control panel and switch cabinet have been scrapped. Components can be inspected. Before delivery in 2026/2027, the machine will undergo a complete mechanical and electrical overhaul. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Working height: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm The machine is currently not operational.

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Cjdpszqux Tsfx Ac Tehb Cannot be tested. Collection only.

Condition: used, Year of construction: 1997, functionality: fully functional, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 540 mm, quill travel distance: 130 mm, quill diameter: 80 mm, BRIDGEPORT ROMI POWERPATH 15 - Manufacturer: Bridgeport / Romi - Model: PowerPath 15 - Year: 1997 - Machine Type: CNC Turning Center - CNC Control: Fanuc Series 21i – To be confirmed - Number of Axes: 2 - Chuck Size: Approx. 203 mm / 8" - Swing Over Bed: Approx. 440 mm - Maximum Turning Diameter: Approx. 280 mm - Maximum Turning Length: Approx. 540 mm - X-Axis Travel: Approx. 185 mm Csdpfezvf Dwox Ac Tohb - Z-Axis Travel: Approx. 540 mm - Spindle Bore: Approx. 66 mm - Bar Capacity: Approx. 51 mm - Spindle Nose: A2-6 - Spindle Speed: Up to 4,500 rpm - Spindle Speed Range 1: Approx. 15–1,500 rpm - Spindle Speed Range 2: Approx. 45–4,500 rpm - Spindle Motor Power: 15 HP / approx. 11.2 kW - Turret Capacity: 12 tools - Tailstock: Included / To be confirmed - Tailstock Quill Diameter: Approx. 80 mm - Tailstock Quill Travel: Approx. 130 mm - Chip Conveyor: Included