Used Baler 200 T With Horizontal Tying System for sale (93,844)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Kjdsx Dnb Ujpfx Ampedk Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Kedpfx Amsvwlqqepodk Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 900 mm with - year of construction 2023 - demo model - length of stroke 185 mm - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge Ksdpsgrydbjfx Ampodk demo model

Condition: refurbished (used), Year of construction: 2015, Durst P10-200 with Corrugated Option, fully automatic Resolution: 10 pl - 1000 dpi Color: 6C + (optional White) Very low usage Speed up to 2025 m2/h Fully automatic loader (feeder) Fully automatic unloader (stacker) INK: Paper and board with very low odor Options: Corrugated Option with 2 rails for dropping down material Corrugated static bar for different material thicknesses Corrugated software to control media and thickness - Understatic bar and automatic media stop for crash prevention - Caldera Rip Software Kodpfx Asy Amckempodk Demo video is from Durst Rho 750 (28 pl, 600 dpi)

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Diameter: 3,500 mm Cylinder height: 5,000 mm Outlet diameter: 200 mm Roof shape: Conical 15° Bottom: Conical shape, apex angle: 60° EQUIPMENT Lifting eyes Lockable manhole, 600 mm diameter with protective grid Support for over-/underpressure protection DN80 PN10 connection for filling line Connection with blind flange Connection for overflow Connection for level switch Kdsdjymxynepfx Ampok

Condition: excellent (used), Year of construction: 2017, overall weight: 315 kg, total length: 1,840 mm, total width: 1,180 mm, total height: 1,000 mm, VRF SYSTEM PANASONIC U14ME2E8 40 KW Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Type of refrigerant: R410a Number of fans: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg Condition: Excellent CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available Ksdpfx Aoqz Uciempsdk - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Kdedpfsh R Tvtsx Ampjk chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Kodpfexqfwtjx Ampsdk Length: 17.10m

Condition: used, axle configuration: 3 axles, first registration: 07/1997, total length: 14,070 mm, total width: 2,480 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,880 mm, Year of construction: 1997, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Further Information = Axle configuration Tyre size: 385/65 R 22.5 Axle make: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 25%; right: 25% Rear axle 2: Tyre tread left: 30%; right: 30% Rear axle 3: Tyre tread left: 25%; right: 25% Weights Unladen weight: 6,160 kg Payload: 37,840 kg Gross vehicle weight: 44,000 kg Functional Loading platform height: 140 cm Condition Damages: None Kdodpfjyz A D Uex Ampok Identification Registration number: OF-38-GG

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, MarelliGenerator Alternator Kedpfx Amowx H Hzjpodk Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation: 500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use Low maintenance – no chemical batteries

Condition: excellent (used), mileage: 562,500 km, first registration: 12/2000, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 620 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel-air, Year of construction: 2000, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, trailer coupling, = Additional Options and Equipment = - 2 sleeping bunks - 600-liter diesel tank - Aluminum fuel tank - Heated exterior mirrors - Driver comfort seat - Differential lock - High beam headlights - Speed limiter - Hydraulic system - Intarder - Air horns on cab roof - Radio/CD player - Beacon lights - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF Intarder - ZF16 manual transmission - Tow hitch = Remarks = HEAVY DUTY, GOOD CONDITION DAF FAS95-480XF SPACECAB (EURO 3) 6x2 STEEL/AIR SUSPENSION CHASSIS WITH ZF16 MANUAL GEARBOX, ZF-INTARDER & AIR CONDITIONING!! 480HP, EURO 3, 6-CYLINDER ENGINE!! ZF16 MANUAL TRANSMISSION!! ZF-INTARDER!! STEEL SUSPENSION FRONT AXLE!! LIFT AXLE!! P.T.O.!! AIR CONDITIONING!! ETC.!! HUFFERMANN HL26/63 20,000 KG HOOKLIFT SYSTEM (6.00 METERS LONG)!! TRUCK IS IN GOOD WORKING & DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE DAF 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Ksdpfx Amsuy I Afepedk Technical Information Number of cylinders: 6 Engine displacement: 12,580 cc Transmission Transmission: ZF16 MANUAL GEARBOX + ZF-INTARDER, 16 gears, manual Axle Configuration Brakes: Drum brakes Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Steering axle; Left tire tread: 30%; Right tire tread: 30%; Suspension: Leaf spring Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg; Inner left tire tread: 50%; Outer left: 50%; Inner right: 50%; Outer right: 50%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Lift axle; Max. axle load: 7,100 kg; Left tire tread: 50%; Right tire tread: 50%; Suspension: Air suspension Weights Unladen weight: 11,950 kg Payload: 14,040 kg Gross vehicle weight: 26,000 kg Functional Body maker: HUFFERMANN HL26-62 20,000 KG HOOKLIFT SYSTEM Condition Technical condition: Very good Visual condition: Very good Further Information Contact Sales Department or Erik Engel for more information.

Condition: used, maximum load weight: 29,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2009, next inspection (TÜV): 11/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,660 mm, total width: 2,600 mm, total height: 3,990 mm, Year of construction: 2009, Refrigeration unit brand: Thermo King Additional information: * Unladen weight: 10,000 kg * Type | First axle: Patlas * Tire size | First axle: 385/65 R22.5 * Tread depth inner left | First axle: 20% * Tread depth inner right | First axle: 20% Kdsdpfx Aoyltlpjmpjk * Max axle load | First axle: 9,000 kg * Type | Second axle: Patlas * Type | Third axle: Patlas * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tread depth inner left | Second axle: 60% * Tread depth inner right | Second axle: 60% * Tread depth inner left | Third axle: 20% * Tread depth inner right | Third axle: 20% * Max axle load | Second axle: 9,000 kg * Max axle load | Third axle: 9,000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional equipment: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * Central lubrication Semtrade B.V. Contact | Martin Klaaijsen | Tel: | WhatsApp: | Email: Export costs | Please inquire in advance about the costs and procedures in your respective country Location | Maasdijk (NL) | 140 km from border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale and errors excepted.

Condition: used, Year of construction: 1973, This Heidelberg OHT, manufactured in 1973, is a robust and reliable punching machine designed for high-volume production. With a serial number T 184 103 H, this unit is currently located in Germany. It handles a largest sheet size of 260 x 380 mm and a smallest sheet size of 40 x 70 mm, with a maximum mold size of 260 x 350 mm. The machine delivers a punching force of 40 tons and boasts an impressive capacity of 5,500 sheets per hour. Powered by a 380 V, 1.25 KW motor, it features two locking frames and weighs 1,100 kg, making it both powerful and stable for continuous operation. The machine is offered as seen, ready for inspection and integration into your production line. Format: 260 x 380 mm Equipment: Kjdpewxm Rmofx Ampsdk Hot foil system: original HEIDELBERG Largest sheet 260 x 380 mm Smallest sheet 40 x 70 mm Max. Mold size 260 x350 mm Punching force 40 tons Capacity 5500 Bg./h 380 V 1,25 KW Own weight 1100 kg 2 Locking frame

Condition: like new (used), Year of construction: 2024, functionality: fully functional, wall material: stainless steel, Equipment: cooling unit, PRODUCTION REACTORS, COLLECTION TANKS, CONTROL PANELS WITH DRIVES, PLATFORMS, AND EQUIPMENT—SUITABLE FOR SYNTHETIC THICKENER PRODUCTION (AND OTHER CHEMICALS SUCH AS POLYMERS, ETC.)—MADE FROM HIGH-GRADE STAINLESS STEEL, ARE FOR SALE AND IN OPERATIONAL CONDITION. CONSULTANCY SERVICES CAN ALSO BE PROVIDED FOR THICKENER PRODUCTION UPON REQUEST. Acrylic thickeners, binders, alkyd resins can be produced, and formulations can be supplied with the sale. The machines are available as a complete set or can be sold separately. Suitable for chemical production in all industrial sectors including textiles, food, cosmetics, construction, etc. 1. REACTOR - 17-ton capacity reactor - Barely used - 316 stainless steel (tank wall 10-12mm, domes 10-12mm thickness) - 37kW ATEX-rated motor with gearbox - Electrical control panel with Delta inverter - External coil for heating and cooling - Currently heated by thermal oil, cooled by chiller cold water - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 2. REACTOR - 22.5-ton capacity reactor - Made from 304 stainless steel / 8mm tank wall, 10mm dome thickness - Unused - 22kW motor and reducer - Electrical control panel with Delta inverter - External coil and jacket for heating and cooling - Equipped with load cells, calibrated for accurate measurement - All flanges and fittings included, fully connected - Platform included 3. STORAGE/FEED TANK - 10-ton capacity 304 stainless steel storage/feed tank - Unused - 8mm dome, 6mm wall thickness - Full-length sight glass system to monitor product level inside - All flanges and fittings included, fully connected *Can be converted to a mixer/stirrer by adding a motor and shaft. Kdedpfjy Aggpsx Ampek 4. HOMOGENIZER/DISPERSING/MIXING TURRAX - IKA brand - ATEX certified - 17 L/hour, 30 kW/10 bar Note: These systems are designed for the production of thickeners used in printing and many other industries. All parts have been manufactured and supplied by experts in the field, meticulously engineered with no compromise on quality. Motor selection, sheet thickness, inverters, and other systems are of top quality and will operate problem-free for the buyer. For more detailed information, please contact us.

Condition: new, Setting total time Frequency speed control Kedpeul T Uiofx Ampedk Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Width: 310 Height: 210 Electric power: 8.5 kW

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Kodpfxsul Ua To Ampjdk Volume: 2700 liters Machine dimensions in cm: Length: 190 Width: 375 Height: 210 Electric power: 14 kW

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Ksdpfx Amexd D Nzspjdk

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration Kjdpfx Amoyxxxvopodk

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro C7200x’ colour production system Kodpfx Aoy Dffyjmpedk Items for sale: 1 x Ricoh Pro C7200x with the following specifications: Includes Fiery Controller E-45A Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5050 incl. Banner Sheet option Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,403,577 pages Colour: Approx. 1,749,798 pages Black: Approx. 653,779 pages Condition: This is a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table Kodpfx Amoyfta Topjdk 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Minor paint touch-ups; excellent condition—see original photos A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Kedoyxhhyspfx Ampodk Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: excellent (used), REF: MM5767 Kdjdpjulc Sqsfx Ampok 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: good (used), Pile Turner Toppy Twister 1000 AJ Silver h=2000 Fully operational, ready to work. Perfect condition. Year of manufacture: 2016. Made in Italy. This machine has an increased stack height of up to 200 cm. Equipment: Aeration, shaking, side margin. Technical specifications: Format: 1200×800 mm Stack height: 2000 mm Load capacity: 1200 kg Device weight: 1300 kg Kdedeyur Iuopfx Ampjk Power consumption: 9 kW Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, takes up little space. Includes a ramp.

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Kdsdpfxoq T N T To Ampok Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min Kdjdpfx Amovu Sayjpsk spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Without feeder: 125 000€