Used Al-Ko Therm Gmbh Aircondition Unit for sale (91,143)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD extraction unit, without control software. Ledpoyrqnzofx Abyeru Dust extraction unit, chip extraction, self-cleaning filter, vacuum-based ALKO ECO JET. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. It is ideally suited for all types of dry dust generated in various technological processes. Filter bags can be replaced according to specific requirements and intended use.

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm Lodjz Ikzpopfx Abyjru H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: new, Clean air dust collector AL-KO POWER UNIT 300 P -Exhibition model- Pre-separator integrated, Fire extinguishing system integrated ----- Technical data ----- Suction nozzle diameter: 300 mm, Nominal air flow rate: 5,089 m³/h, Maximum air flow rate: 6,000 m³/h, Maximum vacuum: 2,587 Pa, Filter area: 30 m², Lredpsu R S A Refx Abyju Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, According to: GS - HO - new exhibition machine -

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Ljdpfxe Aaz S Aj Abyjru Sound pressure level: 73 dB(A), Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Condition: new, AL-KO POWER UNIT 250 P - Exhibition machine - Pre-separator integrated, Fire extinguishing system integrated ----- Technical data ----- Lodpfxs Aaz S Nj Abyjru Suction nozzle diameter: 250 mm, Nominal volumetric flow: 3,534 m³/h, Maximum volumetric flow: 4,900 m³/h, Maximum negative pressure: 3,184 Pa, Filter area: 22.4 m², Chip collection volume: 2 x 250 liters, Number of bags: 2, Motor 400 V: 7.5 kW, Dimensions (L x W x H): 2,351 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 758 kg, According to: GS - HO - new exhibition machine -

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 P-FU with compressed air cleaning and frequency inverter Start-up with frequency inverter, pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle Ø: 350 mm, Nominal volumetric flow: 6,927 m³/h, Max. volumetric flow: 8,500 m³/h, Max. negative pressure: 2,543 Pa, Filter area: 73 m², Ljdexpximspfx Abyjru Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 11.0 kW, Dimensions (L x W x H): 3,337 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, Clean air dust extractor AL-KO POWER UNIT 350 PLUS P-FU with compressed air cleaning and frequency inverter Start-up with frequency inverter, pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum negative pressure: 3,347 Pa, Filter area: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Lsdpfxewzyh Rj Abyoru Sound pressure level: 73 dB(A), Weight: 1,064 kg, according to: GS - HO - 07

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: Hersteller: A·S·T·A Eismann GmbH Food Technology • Typ: DLP • Baujahr: 2017, Manufacturer: A·S·T·A Eismann GmbH Food Technology • Type: DLP • Year of manufacture: 2017 • Machine number: 903758 • Throughput: up to approx. 2,000 l/h • Siemens S7 with touchscreen • Heat recovery and product pump • Feed tank: 100 l • Double jacket: 30 l • Operating pressure tank/double jacket: max. 6/3 bar • Temperature tank/double jacket: max. 90/100 °C • Stainless steel design, CE marking HOMOGENIZER: • Manufacturer: Bertoli S.r.l. • Type: H3007 • Year of manufacture: 2001 • Serial number: 1784 • Capacity: up to approx. 1,200 l/h • 7.5 kW, 380 V, 50 Hz, 15.4 A • Maximum working pressure: 18 MPa or 180 bar Lrjdpfxe Adrqqs Abysu

Year of construction: 2019, condition: like new (used), machine/vehicle number: AT4-F 32x16/32x16 - wetterfest, Equipment: cooling unit, - what is the air volume for recirculated air – 8 687 m3 - air volume for fresh air – 2,3 m3/s - cooling capacity – 61 kW - heating capacity – 22 kW Lsdpfjxvdi Sex Abysru - is there humidification / dehumidification available NO - what are dimensions of the unit - 5x1,5x2,8 m / 4000 kg

Condition: ready for operation (used), TETRA THERM ASEPTIC FLEX 10 UHT ASEPTIC MILK PROCESSING YOM 2004 INCLUDING: - TETRA THERM ASEPTIC FLEX 10 PLATE STERILIZER, MODEL TA FLEX 10 PHE Lrsdpjz Dpuyjfx Abyeu PLC ALLEN BRADLEY -TETRA ALEX 30 HOMOGENIZER, 2-STEPS, NON-ASEPTIC CAPACITY 8 TONS PER HOUR EXCELLENT CONDITION LOCATION - POLAND

Year of construction: 2011, condition: like new (used), functionality: fully functional, machine/vehicle number: 11-02/2011, We are offering this as-new GEBER Industrieofenbau GmbH KO/e/u/-3000 chamber circulation oven, year of manufacture 2011. Manufacturer: Geber Industrieofenbau GmbH Model: KO/e/u/-3000 Serial number: 11-02 Year of manufacture: 2011 Rated voltage: 230/400 V Rated current: 125 A Rated heating capacity: 45 kW Heating medium: Electric energy Current type / Frequency: 3-phase / 50/60 Hz Rated temperature: 300 °C Wiring diagram number: 2011 0054 Internal dimensions (WxDxH): 1300x1300x1800 mm Net weight: 2,000 kg Trolley included (see pictures) Documentation, CE declaration supplied We are happy to arrange installation and commissioning through the manufacturer upon request. Viewing by appointment possible. Lodeyg Nxbspfx Abyjru If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31.064-R-11/2022, overall weight: 1,200 kg, heating capacity: 49 kW (66.62 HP), total height: 2,090 mm, total length: 2,270 mm, total width: 780 mm, Equipment: documentation/manual, Offering a used Optimal E Gr.II-S hot air furnace. Sale due to workshop restructuring. Heating capacity, special version: 49 kW. Cleaning side on the right – with automatic control. - Complies with 1st Federal Immission Control Ordinance (BlmSchV) – Stage 2!!! - Suitable for rooms according to DIN, up to 700-1250 cubic meters. - According to the Federal Immission Control Ordinance (BlmSchV), approved for particleboard or coated wood-based materials (only in woodworking or wood processing companies). Fine sawdust or dust of any kind is not suitable – risk of deflagration!!! - Furnace consumption: approx. 15 - 25 kg/h. Lrsdozy R Rdepfx Abyeu - Tested in accordance with DIN EN 13240: 2005-10 (continuous operation), DIN EN 13229:2005-10, DIN EN 303-5:2012-10. Sale does not include the stainless steel chimney.

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Lredpszil S Isfx Abyeu Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data Lredoxpva Aepfx Abyou - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Lrsdpfszizkyjx Abyju Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2021, 160mm inlet dia 2.2kw motor Max flow rate 2,000m3/hr Ljdez Hztaepfx Abyoru Filter area 9.1m2 Dimensions 1688 x 830 x 2050mm Weight 330kg Serial nr - 243339219303 Year - 2021 CE

Condition: excellent (used), Year of construction: 2020, Used Geb. Reinluft dust collector APU 300 P Year of manufacture: 2020 Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volume flow: 6,000 m³ / h Rated volume flow: 5,089 m³ / h Vacuum: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Lrsdpfxo Afatis Abyju Location: Available from stock, 54634 Bitburg Immediately available Subject to prior sale.

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Lredozr T Dkepfx Abyou Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Technical data: Lrodpfx Absx Emfweysu Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: Water

Condition: excellent (used), Year of construction: 2012, Engine size : 7,5 Kw Maximum capacity : 6000 m3/hour Air pressure : 8,5 bar 3 waste buckets under unit. ( 3 x 165 L ) Filter area : 30 m2 Noise : 71 db Dimensions : L 2300 x W 1100 x H 2400 mm, weight : 900 Kg Equipped with fire extinguisher Lredpfx Aoz Srl Sobyou Outlet nozzle : Ø 300 mm

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Lsdsya H Uyjpfx Abysru

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: Ljdpezlbqrjfx Abysru - 400 mm suction inlet with check valve in rectangular duct - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS according to specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base fra...

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Lrjdpfx Absyzhmbeyeu Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message.

Year of construction: 2012, condition: like new (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Ljdpfozklciex Abyoru Frequency: 50Hz Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Total available: 7 units

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 Lsdpfx Ajpy Uzyebyoru The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg