Used 6375 - Centrifugal Fan, Fan, 75 Kw Fan Fan for sale (38,548)

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Fpjdpfx Aeua Eu Njnrjg Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: used, Centrifugal fan, 18.5 kW, used machine Overall dimensions: 1680 × 1650 × 1260 mm Weight: 457 kg Electrical data: 400 V; 18.5 kW; 34 A Calculated air flow rate: 11,800 m³/h Fpedjyzypnspfx Anreg Calculated pressure: ~4500 Pa, 3.96 kg/s

Condition: ready for operation (used), Centrifugal Fan, Fan, Fan 5.5 kW, Used Machine Overall dimensions: Length: 1710 mm Width: 1440 mm Height: 1660 mm Weight: 400 kg Electrical data: Voltage: 400V Current: 13.3A Power: 5.5 kW Motor specifications: Manufacturer: AEG Type: AMV 132 MV4/8 Blade dimensions: Diameter: 500 mm Width: 230 mm Fpjdpfx Anjvcax Hereg

Condition: used, Fan 2.2 kW, 5000 m³/h, exhaust fan, centrifugal fan, used machine Fedpsypvcljfx Anropg Manufacturer: B és S Ventilátor Type: FVFH 450/500 Overall dimensions: Width: 790 mm Depth: 730 mm Height:980 mm Year of manufacture: 2017 Airflow: 5000 m³/h Electrical data: 400 V, 2.2 kW, 4.7 A Pressure: 800 Pa

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Bossler, radial fan -Type: unfortunately no exact type designation, see photo Fedpfxeuncyaj Anrspg -Speed: 2820 rpm -Power: 0.55 kW -Protection class: IP 54 -Connection input: Ø 155 mm -Dimensions: 300/280/H300mm -Weight: 10.4 kg

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 Fpodouqf Ilopfx Anreg -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Elektra power 7.5 kW -Speed: 1435 rpm -Connection input: Ø 350 mm -Connection output: Ø 350 mm Fpjdpfx Ansfxlf Horsg -Dimensions: 1160/1900/H1770 mm -Weight: 390 kg

Condition: used, radial fan 2.2kw 5500m3/h supply fan VanDIJK radial fan air transport approx. 5500m3 Fsdpfxeufiz Rs Anrjpg stainless steel impeller. plastic housing direct drive motor 2.2 kw 380/220v revolutions: 2830/min pressure side pipe diameter: 250mm suction side pipe 200mm

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Fpjdpfx Anoyxtfwjrjg Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Year of construction: 2001, condition: good (used), 2 pieces axially split volute casing pumps with motor and base plate. Last application as turbine. !!! Map as pump and as turbine as pictures !!! Manufacturer: KSB Type: Omega 350-360 A Delivery rate: 1728 m³/h Delivery head: 32 m Speed: 1450 rpm Year of construction: 2001 For turbine operation Engine: VEM G21R 280 S4 Capacity: 75 kW at approx. 20 metres head and 1600m³/h Voltage: 400 V For pump operation: required shaft power: 177 kW required electric motor: 200 kW NPSH Value: 6.9 Efficiency: 85.28%. maximum operating temperature: 140°C Speed sensor: Yes !! Price per piece !! Fpjdpfx Aod Nqi Ronrjg

Condition: used, mileage: 291,537 km, power: 265 kW (360.30 HP), first registration: 05/2011, fuel type: diesel, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, FAN CF75.360 Day Cab REINORANGE Fodpfx Ansxw Dxperopg 12-speed AS Tronic transmission Equipment: - Fuel tank: 300 l - Rear overhang: 2.40 m - Rear axle ratio: 3.73 - Differential lock - Retarder - Transmission type: 12A1630 - AS-TRON gearbox - Tyres: 315/70R 22.5 - Wheelbase: 1400 mm - Front and rear camera - Tanker superstructure with pipe system - 3 compartments (7,950+5,550+7,750 l)

Condition: good (used), Year of construction: 1975, functionality: fully functional, Veneer press - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5,500 kg - Electric heating plates, no dents Fpodpfjx Akuzsx Anrsg - Pressing area height: 400 mm - 6 cylinders - Rack and pinion guide - with emergency pull cord - Pressing area height: 400 mm - 6 cylinders - Rack and pinion guide - 27 kW, 380 Volt - Piston diameter: 80 mm Transport available at extra cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers. Shipping available at extra cost!

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. Fedpfx Anevf E Avoropg General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, mileage: 310,000 km, power: 188 kW (255.61 HP), first registration: 11/2004, fuel type: diesel, tire size: 315/80R 22.5, axle configuration: 6x2, wheelbase: 5,200 mm, fuel: diesel, fuel tank capacity: 300 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2004, Equipment: ABS, EBS, air conditioning, central locking, crane, power assisted steering, traction control, = Additional options and accessories = - Reversing camera - Cabin - Central lubrication system - Hydraulic grab arm - Catalytic converter - Air suspension - PTO - PTO - Radio/CD player - Disc brakes - Sun visor = Special features = 0E643868 - HVW1144 Equipped with AE crane weighing system = More information = General information Application areas: Cleaning and recycling Registration number: hvk114 Fpedpfx Ajyk Uxuonrog Transmission Transmission: ALLISON, Automatic Axle configuration Tyre size: 315/80R 22.5 Front axle: Max axle load: 7500 kg; Steered Rear axle 1: Max axle load: 11500 kg Rear axle 2: Max axle load: 7500 kg; Steered Functional Lifting capacity: 19,000 kg Crane: HIAB 195 190 W 3, behind the cab Body make: GEESINK GPM III/1625

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Availability: In stock Quantity: 1 piece Further information can be found on the nameplates. Feel free to contact us if you have any questions. Fpjdpfx Askt S S Nsnrog

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Ziehl-Abegg, axial fan -Type: EA 420/4 -Power: 0.45 kW / 1300 rpm -Voltage: 220 V -Bolt circle: 115 mm Fpjdpfxsuqq Nus Anrsg -Number: 4 fans available -Price: per piece -Dimensions: Ø 420 x 135 mm -Weight: 6.2 kg/pc.

Condition: ready for operation (used), Fan with Airflow Meter, Centrifugal Fan, Exhaust Fan, Used Equipment Manufacturer: Szellőző Művek Budapest Model: SZB-300T Fsdpfovrzw Nsx Anropg Year: 1979 Overall dimensions: 320 x 380 x 540 mm Weight: 37 kg Electrical specifications: 400V; 2.6 A; 0.6 kW

Condition: ready for operation (used), Centrifugal pump, vertical centrifugal pump, pump, Andritz 13,9 kW, Used machine Manufacturer: Andritz Type: HP 50-180.1/2/S.15/2 Electrical data: 400V; 27A; 15kW Fsdpov Dr Hfefx Anrspg Flow rate: 42 m³/h Head: 80 m Year of manufacture: 2015 Overall dimensions: Length: 380 mm Width: 350 mm Height: 1080 mm

Condition: new, For sale: professional centrifugal fan/blower from the renowned German manufacturer Elektror Karl W. Müller. The device is in unused, storage condition, featuring a robust industrial design suitable for ventilation and dedusting systems. Fan is used in: • Dedusting installations • Extraction systems • Ventilation systems • Wood and metalworking industries Fpodsyuqr Eepfx Anrjg • Air transport systems Technical data • Manufacturer: Elektror • Model: 2D 07 • Power: 4.5 kW • Voltage: 400 V / 50 Hz • Speed: 2930 rpm • Capacity: approx. 94 m³/min (5,640 m³/h) • Pressure: approx. 1.2 kPa

Condition: good (used), Fan, blower, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, axial ventilator, suction fan, high-performance axial fan, stable fan -Manufacturer: Multifan, Axial fan, Duct fan type 6E40 Fpedpfx Asywib Eenrsg -Motor: 0.17 kW 900 rpm -Flow rate: 3760 m³/h -Protection class: IP 55 -Number: 1x fan available -Dimensions: 500/450/H480 mm -Weight: 10 kg

Condition: good (used), Fan, ventilator, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan, stable fan -Manufacturer: Multifan, built-in fan suction fan type 6E63 -Engine: 0.60 kW 900 rpm -Conveying volume: 12020 m³/h Fedpfx Ansuncx Aerspg -Fan: Ø 630 mm / Ø 640 mm -Protection class: IP 54 -Number: 2x fan available -Price: per piece -Dimensions: Ø 630 x 340 mm / Ø 640 x 340 mm -Weight: 13.1kg / 13kg

Condition: used, Centrifugal Pump, Pump, KSB Etabloc-GN 50-200/1852, Used machine Manufacturer: KSB Fpjdpfey Nnnbex Anrjg Type: KSB Etabloc-GN 50-200/1852 Year: 2003 Overall dimensions: Width: 810 mm Depth: 350 mm Height: 400 mm Weight: 130 kg Electrical data: 400 V; 18.5 kW; 32.5 A Flow rate: 72 m³/h Head: 51 meters

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Fodpfx Anorbh U Aerspg Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: like new (used), 1 pc. Dassler high-pressure centrifugal fan is for sale single inlet with sheet steel housing with the following performance parameters: condition: new, unused type: DCAS-852-2T-10 suction: DN 280 power: 7.5 kW Fpodpfxjyx Tbre Anrjg air volume: approx. 4300 m3 / h speed: 2800 rpm air temperature conveyed: -20 to + 120 ° C motor: insulation class F / protection class IP55

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, New variable screwcompressor ALMIG Variable XP 75 Controller: Aircontrol Premium Year 2025 Hours: 2 h new condition, available short.(1 week) Technical specifications: type: Variable XP 75 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3.85 to 14.59 m³/min at 6 bar : 3.84 to 14.53 m³/min at 7 bar : 3.83 to 14.48 m³/min at 8 bar : 3.82 to 13.38 m³/min at 9 bar : 3.79 to 12.30 m³/min at 10 bar : 3.76 to 12.23 m³/min at 11 bar : 3.71 to 10.89 m³/min at 12 bar : 3.67 to 10.82 m³/min at 13 bar : 3.58 to 10.32 m³/min Installed power: 75 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 76 dB (A) Compressed air connection: G 2" Dimensions and weight Length : 2180 mm Width : 1330 mm Height : 1850 mm Fjdpfxoy Dcp Ao Anrjpg Weight : 2025 kg Visit our store. We´ve got a lot of compressors and dryers on stock.