Used –60°C To +170°C With Test Chamber 1200 Liters. for sale (80,360)

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). Psdpfx Aeya Ev Njmpegk The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: SN49983, functionality: fully functional, Chamber Furnace, Very Good Condition. 12 Months Warranty - Max temperature 1300°C Pedpfx Amjx U Ekdspegk - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - Heating on 5 sides - Inlet and exhaust air with dampers, electrically operated via Belimo actuators - Intake fan controlled by frequency converter via controller - JUMO control system (switchable to other languages!) - Additional type S trailing element for external data recording - Documentation - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection variant: prepared for fixed connection, 32A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, ovens, annealing furnace, industrial furnace, chamber furnace, kiln, baking oven, tempering oven, laboratory furnace, hardening furnace

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, in very good condition. 12 months warranty. - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Inlet and exhaust air with dampers, electrically driven by Belimo actuators - Intake air fan controlled by frequency inverter via regulator Pgedpfx Ametbq Eqopsk - Stainless steel exhaust hood - Bentrup 507 control system, thyristor controller - Controller language: German only, cannot be switched to other languages! - Additional slip ring element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current: 26 Amps - Supply voltage: 3/N/PE 400 VAC - Connection type: prepared for fixed installation, 32 A plug - Documentation and CE declaration - Electrically tested with current DGUV test protocol Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing oven, tempering furnace, laboratory furnace, hardening furnace.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Pgsdpfx Ajxr A R Tompsk Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 1700 liters Machine dimensions in cm: Length: 165 Pgedpfx Aoul T Uiompjk Width: 310 Height: 210 Electric power: 8.5 kW

Condition: excellent (used), RS-Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KSS 600/75-10K Design: Climate Test Chamber / Environmental Simulation Chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulatoren. Suitable for temperature tests, climate tests, material, and aging tests. For use in industrial testing and measurement applications. Technical Data Temperature range: -75 °C to +180 °C Temperature change rate: heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Podjy H Ib Aepfx Ampjgk Weight approx. 1,400 kg Equipment - RS-Simulatoren control / operating panel - Programmable operation - Observation window - Temperature monitoring in the test chamber - Operating hours counter - Side feedthrough - Robust industrial design Scope of Delivery - RS-Simulatoren climate chamber KSS 600/75-10K - Delivery as shown Service before delivery (optional) - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as per images. Note Used device, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: Podpfx Ajy El Ttompogk 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Pgedpfoy D Nyuex Ampok Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change - Prior sale reserved - For further information, feel free to contact us.

Condition: excellent (used), Memmert Type: CTC 256 Memmert Climate Test Chamber CTC 256 Temperature & Humidity Test Chamber Industrial Quality For sale is a high-quality climate test chamber / temperature test chamber from the manufacturer Memmert, model CTC 256. The unit originates from professional use and is ideally suited for laboratories, industry, research, development as well as quality assurance. The Memmert CTC 256 is designed for precise simulation of temperature and climatic conditions. It enables both cooling and heating processes and – in this configuration – humidity control. This makes the unit perfect for material testing, aging tests, climatic stress tests, and long-term experiments under defined environmental conditions. Thanks to the integrated control system, complex test programs with temperature and time sequences can be set. The forced air circulation system ensures uniform temperature distribution in the chamber interior. Via the available interfaces, measurement data can be documented and processed externally. Features: Temperature and climate test chamber (heating & cooling) - Humidity control Electronic controller with programmable function Forced air system for even temperature distribution Internal protocol memory USB and Ethernet interface Additional 230 V socket Feed-through (side) Water container system (humidification/condensate) Mobile on castors Pgjdpoy D Ni Aofx Ampok Technical Data: Manufacturer: Memmert Model: CTC 256 Device type: Climate test chamber Temperature range: approx. -42 °C to +190 °C Internal volume: approx. 256 liters Operating voltage: 3N~ 400 V / 50 Hz Current consumption: approx. 10.6 A Power consumption: approx. 7000 W Protection class: IP20 External dimensions (approx.): 898 x 1730 x 1100 mm (W x H x D) Internal dimensions (approx.): 640 x 670 x 597 mm (W x H x D) Weight: approx. 300–350 kg Condition: used Scope of delivery: (see photo) Memmert CTC 256 climate test chamber Removable shelves Water canister Documents Delivery as shown (Specifications and technical data are subject to change and error!) If you have any further questions, we would be happy to assist you by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h Pedsy Dd Nqepfx Ampegk For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) Pgedoy Dclwopfx Ampok (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Year of construction: 2021, operating hours: 5,018 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h Pgodpfx Amsy Dclqopek For sale is a used temperature test chamber from Weiss Technik. The test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculation fans - Touch operation (WEBSeason) - Viewing window - Temperature control (automatic/manual) Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3-phase Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as the buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) We are happy to answer any further questions by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours: 5128 h For sale is a used temperature test chamber from Weiss Technik. This chamber is designed for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters capacity 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Psdpfoy Dck Tex Ampsgk Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your security as a buyer, please note the following information: The following steps are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see pictures) (Specifications and technical details subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, running hours: 4748 h Offered for sale is a used temperature test chamber from Weiss Technik. The chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Explanation of the model designation: T = temperature test chamber 1000 = approx. 1000 liter volume 70 = low temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Equipment features: - Stainless steel interior - Recirculation air fans - Touch control (WEBSeason) - Viewing window Pgsdpfx Ajy Dciiompjk - Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for buyers: The following processes are carried out on the chambers we offer before delivery: 1. Function check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: excellent (used), Type: UF 450plus Air circulation: forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: up to 99.9 °C: 0.1 °C from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of shelves: 8 Load per shelf: 30 kg Maximum total load: 300 kg Interior: Stainless steel, all-around heating External dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Controller: ControlCOCKPIT TwinDISPLAY Regulator: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust air: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side with 2 feed-throughs approx. 12 cm diameter each Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data, information is non-binding!) Pgedpoyzzm Iefx Ampjk If you have any further questions, we are happy to assist you by phone. For detailed technical data and processing instructions, we strongly recommend consulting the original datasheets or obtaining information directly from the manufacturer.

Year of construction: 2020, operating hours: 6,126 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70/5, Pjdpfeyxm Uljx Ampjgk water-cooled, 1000 liters, year of manufacture 2020, total operating hours: 6,126 h. Description: For sale is a high-quality climate test chamber from Vötsch Industrietechnik (Weiss Technik), model TempEvent T/1000/70/5. This unit is designed for the simulation of temperature conditions and is ideally suited for: - Material testing - Electronics inspections - Environmental and aging tests - Quality and endurance tests The chamber can achieve both very low temperatures down to approx. -70 °C and high temperatures up to +180 °C, and can change temperatures at a defined rate (temperature ramps). Precise control allows for reproducible testing conditions. Operation is user-friendly via an integrated touch panel. Features: - Fast temperature changes (up to 5 K/min) - Even temperature distribution in the test space - Water-cooled system - Industrial standard – robust construction - Maintenance indicator and operating hours counter included Technical Data: Model: TempEvent T/1000/70/5 Temperature range: approx. -70 °C to +180 °C Temperature change speed: up to 5 K/min High precision & stability: Temporal temperature deviation: ±0.1 to ±0.5 K → very stable temperature over time Spatial deviation: ±0.5 to ±1.0 K Temperature gradient: ≤ 2.0 K This makes the chamber ideal for demanding testing processes with high repeat accuracy. Test chamber dimensions: approx. 950 × 1100 × 950 mm (W × H × D) External dimensions: approx. 2000 × 1415 × 2030 mm (W × H × D) Side port: 50 cm / 125 cm Electrical data: 400 V / 3~ / 50 Hz Rated current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A (approx. 2.9 kg) R23 (approx. 1.3 kg) Weight: approx. 1,200 kg For your security as a buyer, please note the following: The following checks are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Condition: excellent (used), CTS Type: C-40/350 Air-cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without heat compensation, and without additional accessories. Options may influence performance data. Technical Specification: - Refrigeration unit: Air-cooled, low-noise, fully hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load: 150 kg/m² - Shelf: Stainless steel, support surface 620 x 600 mm - Maximum load per shelf: 35 kg - Total load with maximum number of shelves: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric entry of setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test sample control Dimensions: - Test volume: 350 liters Pgjdpjx Ekupsfx Ampek - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: Pjdpjx Eabpofx Ampogk - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Pedpfx Asx Eaxbjmpsgk Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description The climatic test cell enables testing of the functionality or material properties of a specimen under the influence of temperature and humidity. Optimized air circulation with a high recirculation rate ensures effective climate transfer to the test specimen. The air conditioning compartment is located at the rear of the interior chamber. The units are housed in a separate frame behind the main device and are easily accessible. The control system is installed in a separate control cabinet, and the control panel is integrated into the cabinet door. For dehumidification, the test cell features a self-regenerating compressed air dryer. Fresh air can be flushed into the test chamber using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and radiant heat, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% r.H. Podpsx D Abpjfx Ampogk - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional equipment. Dimensions: - Interior (Test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm - External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Additional Information: - Inspection possible by arrangement (46325 Borken) - Shipping by freight carrier is possible – costs & arrangements upon request - Scope of delivery: (see picture) - (Changes or errors in technical data reserved) - For further questions, we are happy to answer your call.

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical design: Podpjx Anipofx Ampsgk - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Podpfjyhfg Dex Ampsgk Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Condition: excellent (used), Weiss Model: WK3-340/40 Weiss Climate Test Chamber, Air-Cooled Temperature Testing Volume: 335 liters Pgedpfxsygv U Ns Ampek Test Chamber Dimensions: Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum Temperature: –42°C Maximum Temperature: +180°C Temperature Change Rate, Cooling: 4 K/min Temperature Change Rate, Heating: 3.2 K/min Temperature Deviation Over Time: ± 0.1 to ± 0.5 K Temperature Uniformity Spatially: ± 0.5 to ±1.5 K Climate Testing: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% RH Temperature Deviation Over Time: ± 0.1 to ± 0.3 K Temperature Uniformity Spatially: ± 0.5 to ± 1 K Humidity Deviation Over Time: ± 1 to ± 3 % RH Halogen Lamp: 2 x 24V, 50W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 4.1 kW, Rated Current: 14 A Refrigerant: R-404A Weight: approx. 515 kg For your security as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications reserved!) Further questions can be answered by phone.

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH Pjdpfxeygvn Nj Ampsgk (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Pgsdpoygvm Eefx Ampsk Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.