Used Yanigav Tam 245 for sale (1,203)

Condition: excellent (used), Kitamura HX630i Horizontal Machining Center Year of manufacture: 2010 Control: Fanuc 16i-MB Iedexx Drxjpfx Amietg Travel paths: X: 1000 mm Y: 800 mm Z: 820 mm B axis: 0.001° Table size: 630 mm x 630 mm Spindle: 12,000 rpm Tool changer: 50 positions Tool holder: BT50 The machine is in very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2024, A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible. Itsdpfsuh Ayxjx Amiog

Condition: ready for operation (used), Year of construction: 1994, A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible. Ijdexl Upuspfx Amiotg

Year of construction: 2018, condition: ready for operation (used), Travel X/Y/Z: 460mm/510mm/560mm, table dimensions X/Y: 305mm/305mm, speed: 15000rpm, power: 22kW, tool positions: 50, tool diameter: 95mm, tool weight: 10kg, max. workpiece diameter: 500mm, max. workpiece height: 745mm. Rapid traverse: 60m/min, B-axis speed: 150rpm, positioning accuracy: +/-0.001mm, power consumption: 45kVA, control: Arumatik. Documentation available. On-site inspection is possible. Iedpfx Amev H Dg Neijtg

Year of construction: 2009, condition: ready for operation (used), Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available. Itjdpfx Aot E Tp Tomiog

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 40543, travel distance X-axis: 425 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, TECHNICAL DETAILS X-axis: 425 mm Y-axis: 425 mm Z-axis: 400 mm Pallet size: 300 x 300 mm Feed Rates Rapid traverse: 36,000 mm/min Cutting feed rate: 0–10,000 mm/min Tool Magazine Capacity: 100 ATC Spindle speed: 10,000 rpm Tool diameter: 95 mm Maximum tool length: 350 mm Maximum tool weight: 10 kg Max. tool weight (with tool holder): 10 kg Tool change time: 1.7 s Chip-to-chip time: min. 7 s Control: Fanuc 15M Pallet indexing: Full 4th axis MACHINE DETAILS Installation dimensions: approx. 3,690 x 4,614 x 2,475 mm Transport dimensions of the machine: 2.4 x 3.80 x 2.8 m Connected load: 20 kVA Phases: 3 Frequency: 50/60 Hz Itjdpfx Ajxnwkgsmijg EQUIPMENT - Chip conveyor - Through-spindle coolant Note: The robot is equipped with 40 pallets. Spare pallets are also available.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Isdpfx Amjyf U R Hjiotg Article number: 066-100 Serial number: 315972 Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 10110710, Technical characteristics: # Measurement capacity [mm]: Diameter 0.2 to 50 / Length 300 # Maximum workpiece size: Diameter 150 / Length 300 / Weight 10 Kg # Resolution: Diameter 0.1μm / Length 0.1μm / Rotation 0.018˚ # Precision: Diameter (2+D[mm]/100)μm / Length (5+L[mm]/100)μm # Repeatability: Diameter 0.5μm / Length 3μm Dimensions # Measuring system: 780*650*912 # Installation surface [m]: 0.8x0.8 # Weight: 145 Kg Iodjxxvpvjpfx Amietg # Clamping type: Morse Taper MK2 / Travelling head tension length 20 mm IT system: Windows XP Professional Electrical Equipment # Operating voltage: 230/115V # Connected load: 1.5 kVA / 16 A

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: KMM3312510, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 530 mm, table length: 350 mm, spindle speed (max.): 10,500 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item by 31.07. at the latest! CNC machining center with 2 spindles and 2 swiveling tables! TECHNICAL DETAILS Travel X: 800 mm Travel Y: 400 mm Travel Z: 350 mm Spindle Spindle interface: HSK A63 Spindle speed: max. 10,500 rpm Table Table dimensions: approx. 530 × 350 mm Control Control system: SIEMENS SINUMERIC 840 D MACHINE DETAILS Connection voltage: 400 V 3~ Frequency: 50 Hz Rated current: 87 A Main fuse: 3 × 100 A Min. cable cross-section: 4 × 25 mm² Itodpfjwyli Rsx Amiog Dimensions & Weight Dimensions (L × W × H): 4,800 × 4,200 × 4,000 mm Weight: 8,800 kg Transport will most likely be carried out using a truck with a width of over 3,000 mm. Further information is available during dismantling and loading.

Condition: excellent (used), 1.0 pc used pad printing machine Itsdpfx Amox Ddk Soiog Manufacturer: TECA PRINT AG Model: TPU 250

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool position: each tool is independently coded by the machine and identified in the magazine Itodpfx Aew Al Tbjmieg Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Self-diagnostic function

Condition: used, Year of construction: 2013, functionality: fully functional, Operating hours: Machine runtime 33,520 h, Axes in motion 22,595 h List of clamping devices: - Main spindle Hainbuch SK80 Axzug Iedpjxlcbrjfx Amiotg - Hainbuch SK80 Axfix with various smooth and serrated collets Equipment: - 6-sided turning and milling center - Main spindle with swiveling rotary table - Counter spindle with swiveling rotary table and tailstock function - HSK63 spindle 10,000 rpm - 120 magazine positions - IRCO ILS MUK short bar loader - Hinged belt conveyor - High-pressure coolant system (with cooler) Sale only within the EU.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 735 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: FANUC 16iM, spindle speed (max.): 13,000 rpm, The machine is available from 01.10! TECHNICAL DETAILS Travels Travel X: 735 mm Travel Y: 610 mm Travel Z: 610 mm Workpiece Table size Length: 400 mm Table size Width: 400 mm Workpiece weight: max. 400 kg Spindle and Tool Tool changer: 50 stations Spindle taper: BT 40 Isdpfx Aow Euc Rsmistg Spindle speed: max. 13,000 rpm Spindle motor power: 22 kW CNC control: FANUC 16iM MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 3,987.8 mm x 2,232.7 mm x 2,893.1 mm Machine weight: 15,000 kg

Condition: used, Year of construction: 1990, x-travel 500 mm y-travel 300 mm z-travel 350 mm total power requirement 12 kW weight of the machine ca. 3800 kg dimensions of the machine ca. m Ijdpfx Aet Hwy Ejmiotg

Condition: used, Year of construction: 1998, x-travel 800 mm Ijdpfx Amet Hwtfjiotg y-travel 500 mm z-travel 510 mm total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: used, Year of construction: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm Iedpfxet Hwx Is Amiotg total power requirement 40 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 2000, x-travel 800 mm y-travel 500 mm z-travel 510 mm Itsdpfx Ajt Hwyromisg total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. m

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control FANUC total power requirement 12 kW weight of the machine ca. 2300 kg dimensions of the machine ca. m Itjdpst Hw H Eofx Amijg

Condition: used, Year of construction: 1997, functionality: fully functional, S/N: KMM3251165 Year of manufacture: 1997 X=500 Y=300 Z=350 Number of tools: 36 Itodpfx Amjx Ni Snsijg Spindle taper: SK40

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF-2442-CTA-10-L 2400 x 4200 mm, Left – Right Year: 1999. With convection (Low-E glass) Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) In good technical condition. Inspection during production is possible by appointment. Ijdpfx Amjylaqleietg Available: SEPTEMBER 2026

Year of construction: 2003, condition: ready for operation (used), There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. Itjdpfx Ameivt R Asisg

Year of construction: 2001, condition: ready for operation (used), Motor power: 179kW, length: 9655mm, width: 2490mm, height: 2630mm, weight: 18.7t, with documentation. Itedpfx Aonxk H Nomieg

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Itsdpeh T Dvtefx Amiog Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: used, Year of construction: 2001, pad printing machineTAMPOFLEX Mini Seal 60, year: 2001, Preis: 2.900 Euro, price: Mr. Rainer Eckerle Isdpsdblbpjfx Amistg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Itodpfx Asx Trg Aemijg