Used Weinig Powermat 600 Powerlock for sale (12,162)

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test item protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected according to the images. The current display shows manual operation/stop, temperature actual value 16.59 °C, setpoint 5.00 °C, humidity actual value 39.7 % RH, and water supply actual value 11.0 l. Special feature of this version: Extended high-temperature range up to +210 °C (in many standard versions, only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 9.0 kW Rated current: 14.6 A Protection class: IP 22 Refrigerant: R452A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test item protection / temperature limiter Water connection / deionized water supply Test chamber and condensate drain Pipe connections on the side of the test chamber RS232 interface according to documentation Lrsdpfxsy I Tdxs Abyeu Digital outputs for test item control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 800 kg Scope of supply: CTS climate testing chamber C-70/600 Scope of supply as shown in the images For your safety as a buyer: The unit can be inspected by appointment. Loading with a forklift can be arranged. The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test specimen protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Ledpfxjy Hkazs Abyjru Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface according to documentation Digital outputs for test specimen control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be arranged. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Climate testing chamber T-70/600, water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z, refrigerant R23/R404A Control: -Microprocessor-controlled regulation and monitoring system -Simple, user-friendly terminal integrated into the door. -Digital display of setpoint and actual temperature Easy adjustment via +/- buttons -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test item control Insert rack: Stainless steel, support surface 820 x 710 mm Load per rack max. 35 kg Total load with max. rack capacity 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate measured in the center of the test chamber according to DIN 50 011, Part 12 Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain, unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Lsdeziycbopfx Abysru Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK111-600   Weiss Climate Testing Chamber, Air-Cooled   Performance data for temperature tests:   Temperature range: -5°C – +90°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min   Performance data for climate tests   Temperature range: +10 to +90°C Humidity range: 10 to 98 % RH Temperature fluctuation over time: ± 0.1 to ± 0.3 Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Lrsdpoziyxcefx Abyeu Humidity fluctuation over time: ± 1 to ± 3   Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left 1 feedthrough ∅ 125 mm, installed on the right   Power supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 KW Rated current: 10.0 A Refrigerant: R 404 A 600 liters Weight: 540 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Lodpez Sqf Refx Abyeru Technical Specification Stamping Force 6000 Kn

Condition: excellent (used), lifting height: 3,600 mm, General information Year of manufacture: 2020 Operating hours: 48 Weights Empty weight: 860 kg Functional Lifting capacity: 600 kg Dimensions of cargo space: 241 x 96 x 146 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2025-10-15 Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Lredpfxszbh Dls Abyou TGT Robby 600 * 2020 * Battery-powered * 48 operating hours * 3.6 meter vacuum height * 360 degree rotatable * Lateral movement 2x100 mm * 2 vacuum pump circuit * equipped with lifting hook * Remote Control * 860 kg own weight * 600 kg lifting capacity * Inspection valid until October 2026 * includes documents

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00688, load capacity: 700 kg, arm reach: 2,832 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/600 manufactured in 2012.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/600 Model Number: A05B-1328-B211 Year of Manufacture Robot: 2012.06 Warranty term (months): 12   Payload (kg): 700 Reach (mm): 2832 Lredsz U T Efopfx Abysu Repeatability (mm): ± 0.4 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 2800   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.06 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Lrsdpfx Absqu Sc Hsyeu Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: excellent (used), operating hours: 369 h, lifting height: 3,200 mm, fuel type: electric, mast type: duplex, total height: 2,200 mm, total length: 2,400 mm, total width: 1,160 mm, color: other, Year of construction: 2024 Empty weight: 5.355 kg Lifting capacity: 2.500 kg Supply voltage: 80 V CE mark: yes Technical condition: very good Visual appearance: very good Lsdpjyl Ndbsfx Abyoru = Additional options and accessories = - 3rd hydr. circuit - Blower - Side shift = Remarks = General Country of production: Germany Condition CE type: CE Young used Linde E25H-600 with the following options: Side shift, Panoramic roof, LED Strips front and rear Bluespot 620 AH Battery Built-in charger

Condition: excellent (used), operating hours: 635 h, lifting height: 4,700 mm, fuel type: gas, mast type: triplex, power: 55 kW (74.78 HP), motor manufacturer: Hyundai, total height: 2,440 mm, total length: 3,130 mm, total width: 1,990 mm, color: other, Year of construction: 2025 Empty weight: 7.452 kg Ledpfjztr Idox Abyeru Engine type: Hyundai PM03V Lifting capacity: 4.500 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Mudguards - Side shift - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Duitsland Kaup Integrated Hydraulic fork positioner with side shift, Dual front tires, Load damping, Conversion to single front tires is possible upon request

Condition: excellent (used), operating hours: 6,333 h, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, battery voltage: 80 V, total height: 2,640 mm, total length: 2,980 mm, total width: 1,470 mm, color: other, Equipment: seat heater, Year of construction: 2020 Empty weight: 7.292 kg Battery type: PzS Lifting capacity: 4.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit Ledpfxoztr Ans Abyjru - 4th Hydr. circuit - Beacon(s) - Blower - Work lamp(s) = Remarks = General Country of production: Duitsland Battery from model year 2025!, Hydraulic fork positioner, 1600mm forks, enclosed cabin with heated seats

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,035 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: H20/600D EVO Year of manufacture: 2019 Operating hours: 7,035 h Drive type: Diesel Lifting Equipment Mast type: Duplex mast Lifting height: 4,250 mm Free lift: No Free-lift mast: Without central hydraulic cylinder Tilt angle indicator: Present Load capacity and forks Load capacity: 2,000 kg Fork length: 1,200 mm Side shifter: Present 3rd hydraulic valve: Present 4th auxiliary hydraulic valve: Present, free for fork positioner Hydraulically adjustable forks: No MACHINE DETAILS Dimensions and weight Overall length: 4,100 mm Overall width: 1,200 mm Overall height: 2,777 mm Dead weight: 3,740 kg Maintenance and inspection Next service due in: 878 h UVV valid until: 03/2027 Lrjdpfxoz R D A Hs Abyou EQUIPMENT Full cabin Heater Windshield wiper Road traffic lighting with turn signals LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Lumbar support Seat heating Formerly a Linde full-service machine All dimensions are approximate. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 216

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Lredpfx Abeu Damdsyeu

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 21,074 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,960 mm, fuel type: diesel, mast type: duplex, construction height: 2,860 mm, fork carriage width: 1,360 mm, fork length: 1,200 mm, empty load weight: 7,250 kg, total length: 3,200 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Superelastic Front tire size: 3.00-15 Rear tire type: Superelastic Rear tire size: 2.50-15 Description: In addition to this Linde model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks & sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing options at attractive conditions are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this H50D-02/600. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment in our facility. Full free lift, Lredj Admc Ijpfx Abyju

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C Ledpfs Aawxlex Abysru adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: new, functionality: fully functional, Fast, versatile machine for furniture manufacturing and more 9 controlled axes High axis speeds: 130 m/min / X-axis 75 m/min / Y-axis Processing of even the smallest parts (from 70x35 mm) True 6-sided machining 2 automatic, independently controlled clamping devices Horizontal machining, including from the clamping device side 3 independent drilling heads with a total of 47 drilling spindles Nut sawing unit Lrodpfxotu I Ntj Abyju Milling spindle above and below Air cushion table in the infeed and working area Panel return system in the outfeed area Barcode scanner Special price for the demonstration machine available upon request.

Condition: excellent (used), mileage: 1,400 km, power: 346 kW (470.43 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, crane, cruise control, fog lights, power mirror, trailer coupling, = Additional Options and Accessories = - Power brake booster - High beam headlights - Low noise emission - Speed limiter - Radio/cassette player - Sun visor - Stability control - Toolbox - PTO (power take-off) - Towing hitch = Additional Information = Axle configuration Front axle 1: Steerable Front axle 2: Steerable Weights Unladen weight: 20,680 kg Functionality Mast: Telescopic (10 sections) Lifting capacity: 7,560 kg Lifting height: 3,100 cm Crane: HMF 4020 K6+FJ 600-K4, mounted behind the cab Body manufacturer: HMF 4020 K-6 + FJ 600 K-4 CE marking: Yes Condition Technical condition: Very good Visual condition: Very good MAN TGX 35.470 HMF 4020-K6 + FJ 600K 4 JIB + WINCH EURO 6 L PACKAGE 470 HP DRIVE: 8x4 LEAF SUSPENSION WHEELBASE: 435 cm AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TGS SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, LEATHER OPEN FLATBED WITH REMOVABLE ALUMINIUM SIDE PANELS FLATBED LENGTH: 630 cm LASHING EYES, POSTS HMF 4020-K6 CRANE + FJ 600K4 JIB 10X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT: 31 METERS MAX. LIFTING CAPACITY: 7,560 KG MAX. LIFTING CAPACITY AT 27 METERS: 430 KG 4X OUTRIGGERS 5th AND 6th FUNCTION Ljdsyiungepfx Abyjru FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Lrsdpfo Aa Ea Djx Abysu · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Maximum blade length: 4735 mm · Minimum/maximum saw blade width: 15 mm / 30 mm · Optional, with special coating: minimum/maximum saw blade width: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Dust extraction port: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German engineering · Machine stand in aesthetically pleasing, modern, torsion-resistant double-chamber steel welded construction · Upper and lower doors secured via limit switches · Upper and lower precision band saw blade guide APA 2, size 2 · Finely planed gray cast iron table · Table top can be swiveled up to 45° · Dynamically balanced band saw wheels with vulcanized rubber tires · Fence rail on the left side of the saw blade can be used; fence profile can be folded down · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth spacing 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE compliant including transport pallet including preliminary freight to 65239 Hochheim Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 700 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSK 40, number of slots in tool magazine: 20, Vertical Machining Center Manufacturer: RÖDERS Model: RFM 600 DS Year of manufacture: 2008 Control system: Röders RFM 600 DS Technical data: - X-travel: 600 mm - Y-travel: 450 mm - Z-travel: 300 mm - Spindle speed: 42,000 rpm - Table size: 700 x 550 mm - Tool holder: HSK 40 - Number of tool positions: 20 Equipment: - Extraction system (Keller) - Pallet system (Röders RC 2) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Lrsdpsx Iwg Djfx Abyju Subject to technical changes, errors, and prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: H2X388H00564, Year of construction: 2017, operating hours: 9,775 h, load capacity: 4,000 kg, lifting height: 3,200 mm, fuel type: electric, mast type: simplex, construction height: 2,850 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: H2X388H00564 Load centre: 500 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tyres type: Superelastic Rear tyres type: Superelastic Battery voltage: 80V Sideshift, fork positioner, 3rd hydraulic valve, 4th hydraulic valve, front windscreen, full cab, interior mirror, windshield wiper, Ledpsw Ez Uysfx Abyeru

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, EXTRUSION HEAD G+G 125 PE-PP PIPE HEAD + COLOR STRIPE Last application: PE pipes for drinking water with color stripe System: WENDELVERTEILER Year of manufacture: 2015 Max. diameter: 125 mm Min. diameter: 20 mm Max. output: 600 kg/h, depending on wall thickness and diameter Lredj Ad Nvwjpfx Abyou Condition: Very good condition, ready for operation The pipe head is my property. Location: D-26345 Bockhorn-Grabstede, Germany.

Condition: used, Weiss Umwelttechnik GmbH Type: WK11-600/70 WEISS climate chamber / temperature chamber ATEX II 2 G Ex IIB T4 – explosion-proof test chamber Air-cooled – approx. 600 liters For sale is a used WEISS climate chamber, type WK11-600/70, with an explosion-proof test chamber. The system is suitable for temperature and humidity tests as well as for the conditioning of samples and materials. Simcon/32 control system with digital operating panel Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WK11-600/70 Test chamber volume: approx. 600 liters Cooling: air-cooled Temperature range: -70 °C to +100 °C Humidity function: available Explosion protection: Marking according to the nameplate: II 2 G Ex IIB T4 Equipment group II, category 2 G Explosion group IIB Temperature class T4 CE marking available Dimensions and weight (approx.): External dimensions (H x W x D): 1655 x 1085 x 1980 mm Test chamber dimensions (H x W x D): 950 x 800 x 800 mm Weight: approx. 675 kg Electrical connection data: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 11 kW Rated current: 22 A Refrigeration data: Refrigerant: R404A / R23 R404A: 3.5 kg R23: 0.6 kg Max. low pressure: 18 bar(g) Max. high pressure: 25 bar(g) Equipment: Digital operating panel Temperature and humidity control RS232 interface Test chamber lighting 230 V socket Connections for demineralized water Air-cooled refrigeration system Condition: Used Visual condition as shown in the pictures Scope of supply: as shown in the pictures Condition: used (Subject to changes and errors in the technical data and information!) Ljdpo Ad Ibfofx Abyjru We will gladly answer any further questions you may have by phone.

Condition: used, machine/vehicle number: 12479, Rotor diameter: 300 Rotor width: 600 Ledpfx Absyr Ttmeyeru Rotor knives: 6 Stator knives: 2 Inlet cross-section approx. 519×316 Drive motor: 18.5 kW Pneumatic tilting device for upper housing section Without control cabinet and electrical wiring (can be provided for an additional charge). Spare parts and additional plant components are available.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. Lrjdewgbw Rspfx Abyju 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), WEINIG Quattromat four-sided planer Ledpfx Abev Hqn Tsyoru max planing width 220mm max planing height 120mm 4 heads, heads included bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition