Used Veb Yachtwerft Berlin-Köpenick 12 M Kontrollboot Kb 12 for sale (80,313)

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Hsdpszcwitefx Aqtor

Condition: ready for operation (used), Siemens SIMOTICS 1FT7084-5AC74-1NH0 synchronous motor SN: YFN1629189601004 - Encoder IC2048S/R I24 / Brake 24 VDC 24W 48Nm, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as shown in the photos Hodpjzmlyajfx Aqter

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with a GlobeTech tub lidding machine which worked in line with it. Hsdpspfdhpefx Aqtsr

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Hjdpferdzbtox Aqtjr

Condition: used, axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 09/2004, total length: 16,800 mm, total width: 2,530 mm, total height: 1,750 mm, suspension: hydraulics, tire size: 295 / 80 / R22.5, color: red, Year of construction: 2004, General information Model code: ### Axle configuration Tyre size: 295 / 80 / R22.5 Make axles: BPW ECoPlus Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Double wheels; Lift axle; Max. axle load: 12000 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 2: Double wheels; Max. axle load: 12000 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 4: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 5: Double wheels; Max. axle load: 12000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 21.680 kg Hjdeznu U Nspfx Aqtjr Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 90 Nm, controller manufacturer: FANUC, controller model: series 31i-B5, rotational speed (max.): 24,000 rpm, tool length: 200 mm, tool diameter: 60 mm, tool weight: 4,000 g, input voltage: 400 V, type of input current: three-phase, number of tool turrets: 1, number of tool stations in tool turret 1: 12, number of driven tool stations in tool turret 1: 12, Equipment: chip conveyor, CNC Machining Center CHIRON FZ12 MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 CNC control: FANUC series 31i-B5 Stroke X axis: 550 [mm] Stroke Y axis: 320 [mm] Stroke Z axis: 420 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] X/Y/Z axis acceleration: 10/12/15 [m/s] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 8000 [rpm] Max. turning spindle torque: 90 [Nm] Max. counter spindle speed: 6500 [rpm] Counter spindle torque: 14.3 [Nm] Tool changer magazin number of stations: 24 Max. tool lenght: 200 [mm] Max. weight of single tool: 4 [Kg] Max. tool diameter: 60 [mm] Number of tool stations: 12 Number of tool stations driven: 12 Max. speed driven tools: 5000 [rpm] Milling head spindle attachment: HSK-A 50 Stroke B axis: -10 [°] / +100 Max. milling spindle speed: 24000 [rpm] Max. milling spindle power: 36 [kW] Max. milling spindle torque: 29 [Nm] Tool change time: 0.9 [sec] Chip to chip time: 2.4 [sec] Rated current: 125 [A] Total power required: 85 [kVA] Supply voltage: 400 [V] INCLUDED EQUIPMENT: 1 × High Speed Plus package 1 × LNS QUICK LOAD SERVO 80 S2 bar feeder 1 × KNOLL KF 150/500 paper band filtration unit 1 × 40 bar high-pressure coolant system 1 × Oil cooling unit 1 × KNOLL 600 K-1/200 chip conveyor 1 × RENISHAW workpiece probe Hedszqbdiepfx Aqtjr 1 × RENISHAW TS27R tool setter 1 × ELBARON oil mist extraction unit Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas and Alzmetall, as well as CNC milling, drilling and tapping machines, and CNC grinding machines.

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Hsdpfx Aszqggvoqtor Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- ...

Condition: excellent (used), mileage: 1,074,000 km, power: 324 kW (440.52 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,300 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2008, Equipment: ABS, cruise control, differential lock, electric window regulation, parking heater, power mirror, spoiler, traction control, = Additional options and accessories = - 2 bunks - 12-speed manual gearbox - Aluminum fuel tank - Heated mirrors - Comfort driver's seat - Roof spoiler - Differential lock - Differential lock - Speed limiter - Master switch - Refrigerator under bed - Air-suspended seats - Radio/CD player - Sleeper cab Hodpfozmy Nvex Aqtjr - Sun visor - Auxiliary heater - V.E.B. engine brake = Notes = GOOD CONDITION VOLVO FH440 GLOBETROTTER (VIN: 8B499845) 4x2 TRACTOR UNIT WITH MANUAL GEARBOX, VBI BRAKE, 2 TANKS, AIR CONDITIONING & FRIDGE UNDER BED!! ORIGINAL CAB COLOR!! 440HP, EURO 5!! 12+2 GEARS MANUAL GEARBOX!! VBI BRAKE!! 700+600 LITER ALUMINUM DIESEL TANK!! AIR CONDITIONING!! COMPLETE SPOILER SET ON CABIN!! SUN VISOR!! FRIDGE UNDER BED!! ETC!! GOOD CONDITION TRUCK, READY FOR THE JOB!! MORE VOLVO TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPPING, TRANSIT REGISTRATION, STACKING, LOADING OR TRANSPORT? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY MOVIE ON YOUTUBE FOR THE FIRST IMPRESSION!! (/) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS B.V.; "YOUR GLOBAL TRADING PARTNER" = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Transmission: 12+2 GEARS MANUAL GEARBOX, 12 gears, manual transmission Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Max. axle load: 7100 kg; Steered; Tire tread left: 30%; Tire tread right: 30%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70R22.5; Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inside: 80%; Tire tread left outside: 80%; Tire tread right inside: 80%; Tire tread right outside: 80%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 7,495 kg Payload: 11,505 kg GVW: 19,000 kg Functional Load compartment volume: 1,300 l Loading platform height: 116 cm Condition Technical condition: very good Optical condition: good Further information Please contact the Sales Department for further information.

Year of construction: 2011, condition: used, Field of application: Construction VAT/margin: VAT deductible Please contact Mohamad Fattah Ahmad for more information Hjdpfoh Tyypex Aqtjr Bauer MAT EP-12-1200 Eccentric Screw Pump Good working order

Condition: excellent (used), mileage: 1,070,645 km, power: 132 kW (179.47 HP), first registration: 10/2004, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 7,000 mm, total width: 2,500 mm, total height: 2,800 mm, Year of construction: 2004, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Disc brakes - Front suspension: Leaf - Open roof - Rear suspension: Leaf - Sper Hsdjznwvijpfx Aqtor = More information = Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels; Differential lock Technical condition: very good Visual appearance: very good

Condition: used, mileage: 575,000 km, power: 235 kW (319.51 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,883 mm, loading space width: 2,484 mm, loading space height: 2,286 mm, Year of construction: 2015, Equipment: ABS, air conditioning, tail-lift, Manufacturer Scania Model P320 6x2*4 Carrier Supra 1250 Mt 9.80 m. Refrigerator truck Year 2015 Condition Good Serial Number YS2P6X20005392286 Ref. nr. 768012 Reg. date: 11-09-2015 Last seen: 15-09-2025 Engine: D9 Hk: 320 Km: 575000 Gearbox: Opticruise (GR875) Eurotype: 6 Diesel tank: 1 Tank liter: 400 L Rear view camera: ? Hsdpfexu Tawox Aqtor Cabin heater: ? Air conditioning: ? Cabin type: CP14L Navigation: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22.5 Cover% left 40% 30% 70% Front suspension: Springs Suspension rear: Air Wheelbase: 5700 mm Total weight: 26000 Kg Net weight: 13050 Kg Load capacity 12950 Kg Inside length: 9883 mm Internal width: 1658 + 826mm Interior height: 2286 mm Lift Brand: Zepro Lift capacity: 2500 Kg Remote control: ? Refrigerator brand: Carrier Supra 1250 Mt Refrigerator year: 2015 Engine hours 12602 Double compartment: ?

Condition: good (used), Snorkel, model TM 12, year of manufacture 2016. Good batteries, good condition, 290 operating hours, non-marking tires, 5.60 meters working height, weight 830 kg, CE certified, instruction manual included. Hsdpfx Aqoznb Rqjter

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, Clearing Needle, Push Clearing Needle, 3 pieces -Type: see photos -Keyway width: 2x 10 mm / 1x 12 mm -Submission/Price: complete Hedpfozlgb Nex Aqtor -Transport dimensions: 1085/33/H32 mm -Weight: 6.5 kg

Condition: new, maximum load weight: 22,800 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,535 mm, loading space width: 2,472 mm, loading space height: 2,970 mm, loading space volume: 99 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Talson Clothing Mega Box Trailer TGG TAL 12/18 ▸ 33 Pallets ▸ LED ▸ Code XL General Information: For sale is a Talson Clothing Mega Box Trailer TGG TAL 12/18, renowned for its robust yet lightweight aluminum construction. Ideally suited for textile transport or high-volume goods. Premium craftsmanship, modern features, factory-new condition. Technical data * Vehicle type: TGG TAL 12/18 * Brand: Talson Hedpfx Aqoxrwzgstor * Country of registration: Germany * Unladen weight: approx. 7,200 kg (+/?3 %) * Gross weight: 30,000 kg * Axle load: 18,000 kg * Kingpin load: 12,000 kg * Internal height: 2,970 mm * Internal length: 13,535 mm * Internal width: 2,472 mm * Overall height: 4,030 mm * External length: 13,710 mm * Volume: 99 m³ * Pallet capacity: 33 Euro pallets Chassis & Braking System * Chassis: Semi-chassis in high-tensile ST52 steel * Axles: 2x BPW brand axles * Braking system: Disc brakes with Wabco EBS 2S/2M, ABS & RSS * Tire size: 445/45 R19.5 (premium tires, M+S rated) * Wheels: Steel rims, offset * Spare wheel: included * Technical support legs: 24 t load capacity Body * Self-supporting aluminum sandwich construction * Corrosion-resistant exterior walls made from pre-painted aluminum sheets * Interior lining in galvanized aluminum * Roof: 23 mm thick, fiberglass-reinforced with 4 LED roof lights * Rear double-wing doors with lock * Front wall: 1.5 mm aluminum with Omega profiles (impact-resistant) * 13 lashing rings according to EN 12640 * Rear ramp with dual ramp bearing * Customs sealing available Equipment & Extras * Lighting: * Aspöck Europoint 3 taillights * 4x LED front position lights (white) * 2x LED high-mounted rear lights (red) * 4x LED side marker lights (orange) * 2x license plate lights * Toolbox: Plastic, 400×480×600 mm * Ramp holder: right side, size 4470×1200 mm * Underrun protection: aluminum, compliant with UN ECE R58.3 * Mudguards: anti-spray, compliant with EU 109/2011 * Side marking: reflective, compliant with UNECE R48 * Access ladder: foldable at the rear * Load securing: Code XL (EN 12642) * Certificate: DVZ 2010 Colors & Materials * Body: RAL 9016 Talson white * Rear doors: RAL 9016 Talson white * Chassis: hot-dip galvanized, corrosion-protected * Interior lining: white * Profiles: anodized aluminum Features ▸ 33 Euro pallet spaces ▸ Lightweight, robust aluminum construction ▸ Complete LED lighting package ▸ Load securing certificate Code XL ▸ High-quality BPW axles ▸ Ramp holder ▸ Immediately operational For further information, feel free to contact us.

Condition: new, maximum load weight: 22,800 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,535 mm, loading space width: 2,472 mm, loading space height: 2,970 mm, loading space volume: 99 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Talson TGG TAL 12/18 Mega Box Trailer – RAL 9005 Jet Black For sale are two brand new Talson TGG TAL 12/18 Clothing Mega Box Trailers, year of manufacture 2025. These vehicles impress with their robust construction, high-quality materials, and large cargo capacity – ideal for textile or volume transport. 2x Immediately Available General Information Manufacturer: Talson Type: TGG TAL 12/18 Year: 2025 Country of Registration: Germany Color: RAL 9005 Jet Black Quantity: 2 units available Dimensions Overall height: 4,030 mm Internal height: 2,970 mm External length: 13,710 mm Internal length: 13,535 mm Overall width: 2,550 mm Internal width: 2,472 mm Volume: approx. 99 m³ Pallet capacity: 33 Euro pallets Weights Gross vehicle weight: 30,000 kg Axle load: 18,000 kg King pin load: 12,000 kg Unladen weight: approx. 7,200 kg (±3%) Chassis / Axles Hodpfxsxpp Nwo Aqtsr 2 BPW axles with disc brakes WABCO EBS 2S/2M incl. ABS & RSS (UN ECE R13) Mechanical suspension with “Reset to Ride” function Tyres: 445/45 R19.5 M+S (premium tyres) Steel wheels with offset 1x spare wheel carrier (basket type) Body / Interior Equipment Self-supporting aluminium sandwich construction, non-insulated Side walls with Talfix® system for flexible load securing 27 mm waterproof plywood floor (forklift suitable up to 5,400 kg to EN 283) 13×2 lashing rings (in accordance with EN 12640) Roof with glass-fibre reinforced profiles and 4 LED interior lights Double-wing rear door with double tube lock Front wall: aluminium, interior 18 mm laminated plywood Load securing to EN 12642 Code XL (VDI 2700) Equipment / Details LED exterior lighting (Aspöck Europoint 3) Sockets: 2×7-pin + 1×15-pin (ECE R48 / ADR) Ramp holder right-hand side, 4470×1200 mm Aluminium rear underrun protection to UN ECE R58.3 Side underrun protection to UN ECE R73 Antispray mudguards according to EU 109/2011 Plastic toolbox (400×480×600 mm) Rear access ladder Chassis hot-dip galvanized and corrosion-protected For more information, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, load capacity: 16,000 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,260 mm, fork carriage width: 2,530 mm, fork length: 2,400 mm, empty load weight: 28,460 kg, drive type: Elektro, construction width: 2,570 mm, Electric 4-wheel forklift Load center: 1200 Mast type: Triplex Technical condition: New Front tires type: Superelastic Front tires size: 12.00-20-20PR Front tires condition: New Rear tires type: Superelastic Rear tires size: 12.00-20-20PR Rear tires condition: 80 – 100% Battery voltage: 614V Battery condition: NEW Hodoww Rcdspfx Aqtsr Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, air conditioning, full free lift, CE certificate, safety light, - Free-view Triplex mast - LED lighting - LED side warning lights - Reverse warning system - Camera system - Air conditioning - Adjustable steering column - Fingertip control with directional switch in armrest

Condition: used, mileage: 158,400 km, power: 130 kW (176.75 HP), first registration: 10/2022, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space volume: 42 m³, loading space length: 7,200 mm, loading space width: 2,490 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, tail-lift, Tail lift, Palfinger, 1,500 kg, 1,800 mm. ----Spier Athlet plywood box body. ----* Box body without rear doors, tail lift closes off * Plywood box body * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Trailer brake, 2-line system * Wheelbase 4,760 mm * Driver's air-suspended seat, comfort version * Power windows, electric, on both sides * Air conditioning * Storage compartment, high, on the engine tunnel * Roof hatch/ventilation flap, roof * Trailer socket 24 V, 15-pin * S cab * ClassicSpace S cab, 2.30 m, tunnel * ClassicSpace * Locking system with central locking * Light sensor * Rain sensor Hodpfjy T Ac Iox Aqter * Automatic transmission * Mercedes PowerShift 3 * Seat heater for driver's seat * 12.0 tonner * Air suspension, rear axle * Radio, with USB connection and Bluetooth * Fuel tank 120 liters * AdBlue tank 25 liters * Engine version Euro 6, E * Engine brake * Front spring 4.4 t, parabolic * Trailer coupling, Ringfeder * Trailer coupling G 135, for center-axle trailers * Cross member for trailer coupling G135, center-axle trailer * Electronic Stability Program (ESP) * Lane Keeping Assist * Active Brake Assist * Cruise control * Weight variant 11.99 t (4.4/8.1) * Load securing rails ----For sale only to commercial customers! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to provide you with a leasing or financing offer.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Hsdpfx Aehkztweqtor Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, operating hours: 1,680 h, functionality: limited functionality, air demand: 6.8 m³/h, pressure: 7 bar, total width: 4,800 mm, total height: 5,000 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 5,100 kg, input current: 63 A, input voltage: 380 V, Equipment: cabin, lighting, Professional industrial Vapormatt Leopard wet blasting machine in good working condition. The machine is fully equipped and comes from a professional production environment. Reason for sale: Due to a change in cleaning methods, this machine was taken out of service 2 to 3 years ago. The machine has not been used since. The machine functioned properly. This machine, which we purchased new in 2013, has always been kept in a clean and heated room. The machine must be sold due to lack of space. The machine is sold in its current condition. Technical description: Suitable for high-quality surface treatment, cleaning, and finishing of metal components in various industries, including: * aerospace * overhaul * precision engineering * metalworking * tooling and machine construction Specifications: * Brand: Vapormatt * Type: Leopard * Year of construction: 2013 * Power supply: 380V * Phases: 3-phase * Frequency: 50 Hz * Connected load: 63A * Machine is fully operational * Includes integrated filtration/water treatment unit * PLC/HMI control system available * Complete installation Delivery: * Transportation and dismantling can be arranged, preferably with the buyer taking responsibility. (Incoterms to be agreed) Hodezl Slajpfx Aqtor * Forklift/loading options are available and can be discussed. Feel free to contact us or visit us to inspect the machine and discuss the possibilities.

Condition: ready for operation (used), SEW Eurodrive MDX60A0015-5A3-4-00 power module SN: 58216 + MDS60A0015-5A3-4-00 inverter SN:81859, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Hodpfex Euhtjx Aqtsr

Condition: ready for operation (used), Siemens 1FT5064-1AF71-4EG0 AC-VSA motor SN:EH510042327001 with Balluff BDG6360-2-05-W031.1000-65 / rotary encoder, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Hjdpfx Aqsri Ehljtsr

Condition: ready for operation (used), Siemens 1FT5066-0AF01-2 - Z-axis servo motor, serial number: E1Z80822403003, Z = see nameplate. Professionally refurbished and tested, complete with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! Hodpfx Aji D Sfcsqtsr

Condition: ready for operation (used), Siemens 1FT5072-0AC01-2-Z Permanent Magnet Motor Z = H40, serial number as per photo, professionally fully overhauled and tested with 12-month warranty, 100% functional, delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately. Hedsxlwqbopfx Aqtor

Condition: ready for operation (used), Siemens 1FT6082-1AF71-1AG0 Brushless servo motor, serial number as shown in the photo, professionally fully overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Hjdpei D Tppjfx Aqter

Condition: ready for operation (used), Siemens 1FT6082-1AF71-1AH1 permanent magnet motor, serial number as shown in the photo. Professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately. Hodpfx Aoi D Tp Nsqtor