Used Universal Cutter Grinder Zzm-10A for sale (7,576)

Condition: ready for operation (used), Year of construction: 1978, Table size: 400 x 800 mm Travel range x/y/z: 620/420/400 mm Arbor stroke: Spindle mount: SK 40 Lajdpfxozvm H Hs Afkof Vertical milling head, swiveling in 2 planes Spindle speeds: 63 - 3150 rpm Electrical connection: 400 V Space requirement: 1800 x 1700 x 1900 mm Weight approx.: 1.9 t

Condition: ready for operation (used), Year of construction: 2001, Table size: 400 x 800 mm Table travel distances x/y/z: 600/400/400 mm Swiveling vertical milling head, spindle mounting: SK 50 Quill stroke: 100 mm Lasdpfszvm D Eex Afkjf Speed range: 63 - 3150 rpm Feed rate x and y/z: 16 - 800 mm/min / 8 - 400 mm/min Rapid traverse rate x and y/z: 2000/1000 mm/min Electrical connection: 380 V, 5.3 kW Space requirement: 2200 x 2150 x 1910 mm Weight: 2200 kg

Condition: used, Year of construction: 2009, Technical details: x-travel: 600 mm y-travel: 770 mm Lajdoqy Sr Sjpfx Afksf z-travel: 675 mm A-Axis travel: -180 ... +45 ° b-axis: 360,000 ° spindle drive: 40 / 52 (100% / 40% ED) kW spindle turning speed range: 10000 U/min Tool bore: HSK-A63 numbers of tools in magazin: 40 total power requirement: 47 kW weight of the machine ca.: 13 t including additional tool magazine ZM 182 1 spindle , 5 axes *

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm weight of the machine ca.: 17 t dimensions of the machine ca.: 6 x 3 x 3,2 m Diameter of the table: 770 mm max. table load: 800 kg tool taper: HSK-A63 max. tool length: 465 mm no. of tools in magazin: 60 spindle turning speed range: 12.000 U/min feed power: 8 kN kp power capacity: 25/35 kW 5 axis G550-1024 HSK A-63 Lsdpfx Afot Rmd Iekeaf Grob (Bezeichnung G550-1024) 1 spindle *

Condition: used, Year of construction: 2018, x-travel 750 mm y-travel 660 mm z-travel 650 mm Control Siemens spindle tunring speed 12.000 U/min tool taper HSK 63 The machine was used for machining aluminum and, in our assessment, is in good used condition. It can be inspected under power by appointment. Technical features & accessories: Laedpfxsyrt A Is Afkof - Twin spindle - 5-axis - Pallet changer Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2006, A very fast, continuous 5-axis milling machine. Designed primarily for smaller, complex parts requiring extensive machining. This machine enables continuous 5-axis milling with high repeatability. It delivers tireless performance thanks to its linear motor and glass scale measuring system, which ensure strict tolerances. Including: High-pressure coolant up to 40 bar Programmable B-axis and C-axis Heidenhain 3D touch probe Tool measurement X axis 500 mm Y axis 450 mm Z axis 400 mm Spindle speed 18000 rpm Tool capacity 60 CNC Control Heidenhain TNC530i Tool changer/magazine SK40 Ledpfx Afjzvfn Aekeaf Viewing in operation is possible upon appointment. Availability: 10/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm total power requirement / kW Ledpsig A Erjfx Afkeaf weight of the machine ca. 950 KG

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm z-travel / mm Ljdpfx Ajud Illjfkeaf Control TNC 355C

Condition: used, sanding disc diameter / mm Motor output / kW Overall size / mm machine weight ab. / kg Ledpfx Afozhxm Nekoaf

Condition: used, inner taper of milling spindel / collet diameter / Lodpfx Aehwt Elofkoaf turning speed range 1500 U/min

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Schanbacher S 3 50 Saw Blade Sharpening Machine – working condition – industrial unit For sale is a high-quality circular saw blade sharpening machine manufactured by Willy Schanbacher KG (Germany). The machine is ideal for precise sharpening of circular saw blades used in metal and woodworking industries. Technical details: Manufacturer: Willy Schanbacher KG (Esslingen, Germany) Type: S 3 50 Serial number: 93 2187 Machine type: Saw blade sharpening machine Condition: Working condition Used, with normal signs of wear Last used without issues Features: Adjustable grinding angles (e.g. 90°, 120°, 140°) Precision grinding unit Feed mechanism for consistent sharpening Safety guard included Heavy-duty industrial design Ljdey E Tyujpfx Afkjaf Applications: Metalworking Woodworking Workshops and sharpening services Scope of delivery: Machine as shown ?? Inspection possible by appointment ?? Shipping via freight forwarding available

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, overall weight: 4,500 kg, Lease return vehicles. Lsdezvdcropfx Afkjaf

Condition: excellent (used), Year of construction: 2018, operating hours: 10,414 h, functionality: fully functional, overall weight: 4,200 kg, Lease return in very good condition. See PDF for details. Please contact us by email if you have any further questions. Ljdpozvdawefx Afksaf

Year of construction: 2021, condition: used, empty load weight: 110 kg, Weight: 110 kg Laedpjzvpn Hefx Afkef Year: 2021 Condition: Used, good condition Multiple units in stock. Price: € 1250,- excl. VAT

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Ljdpfx Afezu Ixnekeaf Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Lsdexwtu Tspfx Afkjaf Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges Lasdpezuzb Ajfx Afkef - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Lajdpfx Afozuy Areksf

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. Lasdjzhnafopfx Afkof - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives Ledsxtu H Nepfx Afksaf • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2003, vertical turret lathe machining center Hüller Hille Hessapp Ledpfszv D U Uex Afkoaf VDM 250 R year of manufacture 2003

Condition: used, Year of construction: 1992, tool grinding machine Schütte WU 750 CNC Year of manufacture 1992 Laedjzv D Uzjpfx Afkjf

Condition: ready for operation (used), Year of construction: 2019, operating hours: 12,568 h, functionality: fully functional, 2-axis Lathe – Universal | Brand: DMG MORI | Type: CTX alpha 500 Year of manufacture: 2019 (Start-up: July 2019) The machine can be inspected by appointment under power. Condition: Fully functional / ready for operation. Operating hours (week 31/2026): - Total operating hours: 12.568 h - Spindle hours: 2.593 h Ledpfx Afjzvz Aijksaf TECHNICAL SPECIFICATIONS / EQUIPMENT: - Turning diameter: 165 mm - Max. turning diameter through the quill: 65 mm - Turning length: 500 mm - Main spindle as an integrated spindle motor, ISM 52 Synchro * Drive power (100/40% duty cycle): 13/14 kW * Speed range: 20–6.000 rpm - Partial hollow chuck (hydraulic) * Pull-tube internal diameter: 52 mm - C-axis and spindle brake (hydraulic) - 12-position disc turret, make: Sauter * VDI 30 mount, DIN 69880-30 with tool drive * Connection/drive to DIN 5480 - Direct measuring system on the X-axis - Tailstock - CNC control: CELOS with Siemens 840D sl Operate (with ShopTurn 3G and ERGOline) - Y-axis for cross slide, stroke: +/- 40 mm - Hollow spindle stop, adjustable, mounted at the rear on a hollow chucking device, Ø 66 mm (chuck-independent) - Coolant system 8/20 bar, * Coolant tank: 600 l, 8 bar/20 l/min and 20 bar/25 l/min, selectable via M-function, with supply through the turret disc to the turret stations * Belt filter system, filter fineness 40 µm * Level monitoring - Mechanical oil mist separator - Coolant spray gun - Hinged belt chip conveyor, incl. coolant tank and coolant pump, 6 bar/20 l/min - DMG MORI NETSERVICE - DMG MORI IoTconnector (enables DMG MORI’s online services) - DMG MORI Service Agent (controlled machine maintenance and servicing) - Special version, operating mode BA4 “emery operation” - SK003 reduced bar machining package D65, comprising: * D66 hydraulic hollow-bar clamping device * Workpiece retrieval device, with conveyor belt, conveying to the left for parts up to max. D65 x 185 mm in length, max. workpiece weight 3 kg - Documentation - CE marking No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale -

Condition: used, Year of construction: 1970, total height: 1,700 mm, total length: 1,400 mm, total width: 900 mm, Colour: Grey Empty weight: 500 kg Lasdozry I Ajpfx Afkof - Year: 1970 - Documentation available: No - CE certificate present: No - Serial number: CH - Control: Conventional - Motor power: 1.4kW - Transport dimensions: 1400mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, total height: 1,500 mm, total length: 1,200 mm, total width: 110 mm, Colour: Cream Empty weight: 750 kg Price: On request - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No Lodszry Ivopfx Afkjaf - Serial number: 84915 - Control: Conventional - Transport dimensions: 1200mm x 110mm x 1500mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum