Used Treatment Chair for sale (958)

Condition: used, Year of construction: 2010, mileage: 1,081 km, power: 15 kW (20.39 HP), first registration: 04/2010, overall weight: 1,787 kg, fuel type: electric, color: red, axle configuration: 4x2, maximum load weight: 1,080 kg, empty load weight: 707 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, * German vehicle * Condition see photos * Ideal for large halls, parking garages etc... * Original only 1081 operating hours * Ideal for operation in large halls, logistics and parking garages as no exhaust fumes due to electric drive * Compact high-performance scrubber-drier for wet scrubbing and dry vacuuming in one operation * Combination machine with additional sweeping system, with dust extraction. * Hako B1100 sweeping and scrubbing machine * Area performance max. theoretically up to 7,000 m2 /h * Wet cleaning unit * Working width of brush head 102 cm * Brush diameter (2 brushes) 53 cm * Brush speed 210 rpm * Brush motor (2 pieces) 2 x 700 W * Brush contact pressure up to 540 N * Suction foot (working width) 126 cm * Fresh/dirty water 185/185 liters * Sweeping suction device: * Working width 138 cm * Electrical equipment * Rated voltage 36 V * Drive battery 36 V/640 Ah5 PzS * Drive motor 2000 W * Travel speed up to 8.0 km/h * Sweeping suction ? Fine and coarse dirt are picked up cleanly in the dry area in front of the scrubbing unit. * Wet scrubbing ? Even the toughest incrustations are removed cleanly by the rotating disk brushes * Dry vacuuming ? The pendulum-suspended, parabolically shaped squeegee leaves the floor immediately dry and ready to walk and drive on * Large tank capacity ? Long working times and short set-up times thanks to the flexible wall between the fresh and dirty water areas. * Dirt/water treatment system for multiple use of the water used for cleaning. ? Consistent cleaning quality in conjunction with the detergent dosing system. ? Enormous reduction in set-up times and water consumption. ? Optional use of fresh water or treated waste water. The fresh water tank always remains clean If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Pgodpfx Akovhqiysiju All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: not inspected (used), VERINOX JUNIOR universal oven for small and medium productions. The technological excellence of our most sophisticated industrial systems – applied to ovens for small and automatic medium productions – ensures maximum performance and top quality products. Oven with forced draft ventilation for dry cooking, steam cooking, drying and smoking Maximum heat treatment uniformity and efficiency (+/- 1°C) Fast heating up to 180°C Cooking time optimisation Suitable for all types of cooking and for top quality products Simple to use Low energy consumption Recipes and processes programmed from an electronic control panel for automatic oven operation Works 24 hours per day with the utmost reliability The JUNIOR oven is suitable for the following heat treatments: - Dry cooking - Drying - Frying - Smoking - Steaming Preparation uses: cheese, salami, pasta, confection of vegetables and fruits, drying of meat products, smoking of meat products, animal food, fish, etc. Junior universal ovens are thermally insulated with an expanded material that has high insulating properties, coated with sheets of satin-finish and ribbed AISI 304 stainless steel. The excellent speed and uniformity of the heating up to a maximum of 180°C, an important feature of the JUNIOR, is ensured by stainless steel fans and special shielded heating elements. The JUNIOR oven comes with its own steam production system. Integrated control system. The microprocessor-based control panel is an extremely hi-tech, simple and reliable means of control. Its main features are working temperature and time indicators, an indication of the number of stages in progress, airlock position indicator, commands for setting ventilation, commands for setting stage transition, commands for setting pause and delayed start, memorisation of values and functions in progress. Total external dimensions: W 107 cm x H 100 cm x H 215 cm Interior dimensions: W 97 cm x W 75 cm x H 120 cm Interior dimensions of the lower collector drawer: W 73 cm x W 72 cm x H 25 cm Trolley: 90 cm x 72 cm x120 cm The cell has 2 product probes. Power supply: 380 V, 12 kW For the Romanian companies, there is the possibility of selling in instalments. Price Euro 2.900 Euro + VAT, FCA: Oradea/Romania Pgedpog H Tldofx Akiou Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: not inspected (used), Rotary pump (Pu 115) lenght/width/height: 1,15m x 0,40m x 0,65 m weight: 165kg Motor Power: no info rpm: 1400 Capacity range: 36 Hm : 30 Pgedpfod Nd Uksx Akieu

Condition: good (used), The SMT 400 2.4C is a top-class ceramic furnace for continuous operation, designed for a wide range of heat treatment processes. This high-tech device is a vertical convection convection oven that can be used for sintering, annealing, tempering, curing, heat sterilizing, aging and drying a wide variety of items. SMT 400 2.4C operates at temperatures from 350 °F (177 °C) to 2000 °F (1093 °C) and has a capacity of 16 cubic feet (454 l). The oven reaches extreme temperatures quickly and is characterized by exceptional stability Pgsdpfxeq I Sgye Akiju

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Psdpfx Asfyn Rpekijgu Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: new, functionality: fully functional, power: 18.5 kW (25.15 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 50 l, color: red, overall weight: 2,600 kg, empty load weight: 2,500 kg, lifting power: 1,000 kg/m, lifting height: 3,310 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, shovel volume: 0.4 m³, digging bucket width: 160 mm, Year of construction: 2025, load capacity: 980 kg, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, differential lock, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-T telehandler with the new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter. The new turbo engine is particularly economical, and with the 2-stage hydrostatic drive, it can reach speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and a small turning circle, it is ideal for use on even the smallest areas. The 2210T wheel loader with telehandler comes standard with a quick-change pallet fork and a standard bucket, so you can start working immediately. With the additional hydraulic control circuit, various attachments can be used for the yard loader. The telescopic boom gives the 2210-T an excellent reach. The electric gear on the joystick makes operating the H&R 2210T particularly convenient. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Advantages of the H&R 2210T Telehandler • Fully equipped • Efficient engine from Germany (Euro 5) • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cab • Includes pallet forks • Includes standard 150 cm bucket • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake-inch pedal • Rearview camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge Pgodpfxsul Af Ds Akiju • Trailer coupling • 1-year spare parts warranty • CE compliant according to the EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria upon request Technical specifications Engine: 3-cylinder Perkins Turbo Power: 25 HP Emissions class: Euro 5 Lifting capacity: 980 kg Lifting height: 3310 mm (bottom edge of standard pallet fork) Unloading height: 2796 mm (bottom edge of standard bucket tipped out) Lift time / lowering time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tires: 31 x 15.5 - 15 Accessories and spare parts are available from us. Please provide us with your telephone number when making inquiries!

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Pjdpfjun Shgox Akiegu Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Pgedpfxsupqi Eo Akiju Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Year of construction: 2021, condition: excellent (used), Richel irrigation and fertigation system with 4 vertical centrifugal pumps WILO type: Helix. Mixing unit : 12m3/h 1 wastewater treatment plant make : UVGERMI Type: 3XAD300. with water filter Hectron AG 100 1 fresh water tank capacity : 1.900L. 2 x water tank capacity : 3000L Pgedpfoupwhzox Akisu

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. Psdpfx Aksupyw Eoiegu QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, empty load weight: 1,450 kg, For sale: a Jumag steam generator with a gas burner. An oil burner can be included upon request. The unit is in very good condition. Complete with a platform and water treatment system. Pgjdpfx Asydnziokiou Type DG 560. Year of manufacture: 2013. Steam output: 560 kg/h. Maximum steam pressure: 13 bar. Delivery is possible for an additional charge. On-site inspection is possible. Please feel free to contact us if you have any questions.

Condition: used, A high-quality liquid transfer and control package consisting of 4 identical Grundfos horizontal multistage pumps and a comprehensive set of industrial blue butterfly valves with flexible rubber expansion joints. Fits for industrial water loops, water treatment boosting systems, pressure maintenance, or process engineering setups. The Package Includes: Psdpfxoz Ahmbj Akiogu 1. Horizontal Multistage Pumps:4 units x Grundfos CM15-3 A-R-A-E-AQQE-A-A-N Motor Power: 4.0 kW (Motor Type: MG100LB)Flow Rate (Q): 17 m³/h (74.8 GPM)Nominal Head (H): 44.6 m (63.5 PSI)Max Head (Hmax): 51.1 m (72.7 PSI)Pressure Rating: Max 10 bar (145 PSI) / Max 90 °COrigin: 2. Industrial Valves & Fittings :Large batch of industrial butterfly valves (Blue body with manual lever handles for quick on/off flow isolation).Matching pipe connection segments and end caps. (please see photo) Condition: Used, clean, stored carefully in a dry box inside an indoor warehouse.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,675 mm, travel distance Z-axis: 1,080 mm, number of slots in tool magazine: 4, total height: 2,354 mm, total length: 3,800 mm, total width: 3,050 mm, Equipment: CE marking, PADE TARGET – 5-Axis CNC Machining Centre with Additional C Rotary Axis Manufacturer: PADE, Italy Model: TARGET Year of manufacture: 2006 Condition: Used, fully operational Availability: Available for delivery November–December 2026 Technical specifications • 5 simultaneous CNC machining axes + additional controlled C rotary axis • Axes: X / Y / Z / A / B + C • C-axis rotary table usable during machining • X-axis travel: 1,600 mm Pgjdpfx Aszx S Afokiju • Y-axis travel: 1,675 mm • Z-axis travel: 1,080 mm • A-axis rotation: 360° • B-axis rotation: ±90° • Maximum working area: 1,600 × 1,100 mm • Machining head with 4 independent electro-spindles • Electro-spindles with ceramic bearings • Revolving machining head for rapid spindle/tool selection • Adjustable workpiece supports and clamping system • Suitable for routing, profiling, drilling, boring, mortising and tenoning • Particularly suitable for complex and curved solid-wood components, including chair, table and furniture parts Control system • Original WINMEDIA 93000635J industrial PC has been replaced by a standard PC • Machine is fully operational in its current configuration • Available for demonstration in operation prior to dismantling Machine description The PADE TARGET is a versatile CNC machining centre designed for complex machining of solid-wood components, particularly chair, table and other shaped furniture parts. The machine combines simultaneous 5-axis machining with an additional controlled C rotary axis, which can also be used during the machining process. Together with four independent electro-spindles, this configuration provides high flexibility for machining complex three-dimensional components from multiple orientations. The machine is in fully operational condition and is currently installed and in use. The original WINMEDIA 93000635J industrial PC has been replaced by a standard PC, and the machine operates normally in its present configuration. The machine can be inspected and demonstrated under in our production plant in Laktasi, Bosnia and Herzegovina. Available for delivery: November–December 2026.

Year of construction: 2019, condition: good (used), LEMORAU MEBR+ 400 Digital Label Finishing & Die-Cutting Machine - 400 mm | Full Rotary & Semi-Rotary | Flexo Varnishing | Turret Rewinding | Approx. 700 Die Sheets Semi-rotary operation offers excellent flexibility for short runs and frequent job changes, while full rotary production enables considerably higher speeds for longer production runs. This particular machine features a comprehensive configuration, including two rotary flexographic spot-varnish units, corona treatment, web cleaning, turret rewinding, and the high-speed semi-rotary Speed Pack. An additional highlight is the extensive tooling package with approximately 700 die sheets, representing significant added value for the future owner. _____ MACHINE DETAILS Manufacturer: LEMORAU Model: MEBR+ 400 Year: 2019 Machine type: Digital Label Finishing & Die-Cutting Machine Maximum web width: 400 mm / 16" Operation: Full Rotary & Semi-Rotary Application: Digital and conventionally printed labels / self-adhesive materials _____ PRODUCTION SPEED Full Rotary Mode • Maximum speed for blank labels: 200 m/min • Maximum die-cutting speed in register: 120 m/min Semi-Rotary Mode • Standard semi-rotary speed: up to 40 m/min, depending on die / repeat • Equipped with Speed Pack • Semi-rotary production speed up to approximately 80 m/min, depending on application and tooling This combination makes the machine suitable for both short-run digital finishing and considerably longer production runs. _____ Pgodoz Ea I Topfx Akiou DIE-CUTTING SYSTEM The MEBR+ combines rotary and semi-rotary die-cutting in a single machine. Rotary Die Repeats 203.20 – 431.80 mm / 8 – 17" Semi-Rotary Die Repeats 41.30 – 371.00 mm / 1.6 – 14.6" The semi-rotary system significantly reduces tooling requirements for shorter jobs, while full rotary operation provides higher productivity for longer runs. Tooling Included A particularly important advantage of this machine is the extensive tooling package: Approx. 700 die sheets included This represents considerable additional value and can substantially reduce future tooling investment. _____ 2 x FLEXOGRAPHIC SPOT VARNISH UNITS The machine is equipped with: 2 x Rotary Flexographic Spot Varnish Units Suitable for: • Spot varnishing • Protective coatings • Decorative varnishes • Special label finishing applications • Additional surface enhancement The flexographic units considerably increase the versatility of the machine and allow additional finishing operations to be integrated directly into the production process. _____ CORONA TREATMENT The machine is equipped with a corona treatment system, providing improved surface treatment for demanding substrates. Particularly useful for: • Film materials • Synthetic substrates • Improved coating adhesion • Improved varnish adhesion _____ WEB CLEANING SYSTEM Integrated web cleaner for removing dust and contamination from the material before further processing. This can contribute to improved finishing quality and more consistent production results. _____ WEB GUIDING & TENSION CONTROL The MEBR+ offers sophisticated web handling technology.

Condition: like new (used), Static Autoclave BARRIQUAND STERIFLOW 6 Baskets – Stainless Steel Static autoclave BARRIQUAND STERIFLOW with a capacity for 6 baskets, designed for the sterilization and thermal treatment of packaged food products in industrial processes. Manufactured by BARRIQUAND STERIFLOW, a specialist in thermal treatment systems, this autoclave is designed to operate using controlled cycles of heating, sterilization, and cooling, guaranteeing reproducible process conditions. Its industrial construction in stainless steel, together with the automatic control system, allows it to be integrated into canning plants and production lines that require pasteurization or thermal sterilization processes. MAIN FEATURES Manufacturer: BARRIQUAND STERIFLOW Type: Industrial static autoclave Capacity: 6 baskets Application: Sterilization / thermal treatment Batch process Horizontal chamber Stainless steel construction Large-diameter front door Mechanical safety locking system Automatic cycle control Control panel with Siemens HMI Control of the different process parameters Integrated piping and valve system Pjdpfozbmvmjx Akiogu Designed for industrial operation Suitable for integration into sterilization lines PROCESS The BARRIQUAND STERIFLOW 6J is designed to perform controlled thermal treatments of previously packaged products. The baskets with product are placed into the autoclave chamber, and once closed, the programmed cycle is automatically executed, controlling the different phases of heating, thermal holding, and cooling. The system allows processing different types of packages and products according to the recipe, sterilization parameters, and installed configuration. It can be integrated with: Basket loading and unloading systems Basket conveyors Automatic loaders and unloaders Process water preparation systems Automatic sterilization lines Handling and palletizing systems APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, pet food, and other food processing plants that need to sterilize or pasteurize packaged products. Depending on the configuration and process, it can be used with cans, jars, trays, pouch bags, and other packaging suitable for thermal treatment in an autoclave. The combination of BARRIQUAND STERIFLOW technology, a capacity for 6 baskets, and automatic process control provides a robust solution for industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), CUOMO AGM4 Automatic Can Seamer with 24-Valve Vacuum System The CUOMO AGM4 automatic can seamer is equipped with a 24-valve vacuum system, designed for continuous operation in industrial canning lines. It evacuates air from the headspace and then hermetically seals metal containers. The system combines a 24-valve rotary unit for vacuum operation with the automatic seamer, allowing the inside of the can to be conditioned before the double seaming process. This configuration is particularly suitable for canned products where it is necessary to reduce residual air and achieve an adequate vacuum in the sealed container. MAIN FEATURES -Manufacturer: CUOMO -Model: AGM4 -Type: Automatic can seamer with vacuum system -Vacuum system: 24 valves -Automatic and continuous operation -Automatic can feeding -Can treatment under vacuum -Reduction of air in the headspace -Synchronized transfer to the seamer Psdpfx Ajzxw Akskiogu -Automatic cap feeding and positioning -Mechanical sealing system -Double seaming -Automatic discharge of sealed cans -Construction primarily in stainless steel -Fairings and safety guards -Electric drives -Robust industrial design -Integrable into complete canning lines PROCESS Pre-filled cans automatically enter the 24-valve unit, where the vacuum operation is performed before sealing. This process reduces the amount of air in the can, helping to achieve the required vacuum conditions after sealing. Next, the cans are synchronously transferred to the CUOMO AGM4 seamer. The lid is placed on each can, and the sealing mechanism performs the necessary operations to form the hermetic double seam between the lid and the can body. Once sealed, the cans can continue to: Can washers Seam inspection systems Weight checkers Autoclaves Pasteurizers Cooling systems Labelers Case packers Palletizers APPLICATIONS Particularly suitable for canning industries processing vegetables, fish, meat, ready meals, and other canned food products where it is necessary to control residual air and the can's vacuum before or during the sealing process. The compatible can formats and dimensions will depend on the tooling currently installed and the specific configuration of the machine. The combination of CUOMO AGM4 + 24-valve vacuum system provides an industrial solution for automatically performing the vacuum conditioning and subsequent hermetic sealing of cans. Machine available for inspection. Additional technical information, can formats, production speed, vacuum level, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Pgedpfx Akezzhfuoiou Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: good (used), Year of construction: 2006, 1 used abrasive blasting system Manufacturer: GLÄSNER Type: DSK 1500 W Year of manufacture: 2006 Factory number: 5162-003 Technical data Working area: 1,400 × 1,150 × 900 mm Max. operating pressure: 6 bar Drive power: 2.2 kW Process: Abrasive blasting Abrasive blasting tank: included Turntable: included Lighting: included Dust extraction and filtration unit Compressed air treatment Viewing window / gloves: included CE Pgodszyx Sispfx Akiju The system was used exclusively for blasting stainless steel and is in very good condition.

Condition: like new (used), Year of construction: 2024, operating hours: 300 h, Kaeser EBS 410 CL SFC screw blower with a 37 kW motor. Energy-efficient. 41 m3/min, 600 mbar. Psdoz I R Iiepfx Akisgu

Condition: used, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 450 mm, side roll diameter: 410 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, overall weight: 23,000 kg, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, hardened rollers, Plate bending machine 3 ROLL HYDRAULIC MODEL 3000 X 40 MM - YEAR 1997 PLATE BENDING ROLL PLANETARY DESIGN PYRAMID DUAL PRE-PINCH Nameplate Bending capacity -Plate width : 3000 mm -Rolling plate thickness: 40 mm -Prebend thickness: 30 mm --- minimum rolling ID 550 mm depending on plate thickness and width Rolls dimensions: -Useful length 3100 mm -top roll D 450 mm -side rolls D 410 mm Accessories installed: Central upper support hydraulic control to hold the plate formed into large diameters Side arm hydraulic to support the large diameter being formed Conical bending attachment with hydraulic control of the angle setting for cone rolling, cone bending stopper hardened pad swing-down on the drop-end of the machine. Technical data Rolls hardening induction treatment, high strength surface of the 3 rolls Power driven total on the 3 rolls with axial gearbox and direct drive hydro-motor each roll Console electric on wheels with centralized commands joysticks and digital readout. Digital readouts of the rolls position bending and pre-bending. Re-rolling system for welded shells rounding. Opening front side hydraulic drop-end to unload the closed shell. Pgodpfx Ajz H N Ifskiou Variable speed working roll bending rotation hydraulic speed fast/slow. Voltage supply 3 phase Vac, electric power 40 Hp.

Year of construction: 2026, condition: new, I have a new GM 25 S blower for sale, as well as a used Aerzen GM 25S blower. Pgsdpfx Aez Erlqskiju

Condition: ready for operation (used), functionality: fully functional, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,950 kg, next inspection (TÜV): 11/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,028 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1650 sweepers and winter maintenance vehicle, first owner Engine inspection including oil, oil filter, and fuel filter will be performed before sale. Machine version with a new pedal system. 1,960 operating hours (sweeping) 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf vacuum hose (rare) Includes Kif snow plow, type CM 1600, 1500 mm wide (like new/never seen snow) or, alternatively, Kif front brush, type CM 1600, 1,300 mm wide, manufactured in 2019 (like new/never seen snow), not shown in the pictures Includes Gmeiner salt spreader, type Husky 500V FS, with support legs (like new/used twice for testing) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emission Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-sprung driver's seat Air conditioning / heating Water treatment system Fire hydrant connection Metering system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweeping brushes, snow blades, and lawnmowers (not included). Errors, changes, and prior sale reserved. We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. Pgedpfxszmzkbo Akisu We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment. Outside of these hours, telephone appointments can be arranged. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters are given priority; this applies to our entire vehicle stock. The above information is non-binding. Errors/changes and prior sale reserved!

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 300 kg, workpiece height (max.): 1,800 mm, workpiece length (max.): 7,200 mm, fuel: domestic gas L, Eisenmann Powder Coating System – Complete System for Sale A high-quality, industrial powder coating system from the renowned manufacturer Eisenmann is for sale. The system was installed in 1995 and has been continuously modernized and kept up-to-date technologically. It is currently in operation and can therefore be inspected under real operating conditions. The system is characterized by its high reliability, robust industrial design, and long-term operational safety. Thanks to ongoing modernizations, it offers an economical solution for companies looking to expand their coating capacity or replace an existing system. Technical Data • Manufacturer: Eisenmann • Year of Construction: 1995, but continuously modernized • Condition: In operation / ongoing production • Maximum workpiece dimensions: 600 × 1,800 × 7,200 mm (W × H × L) • Water dryer: max. 290 kW (natural gas), modulating, manufacturer Elko • Powder dryer: max. 460 kW (natural gas), modulating, manufacturer Elko • Heating boiler: max. 460 kW (natural gas), modulating, manufacturer Elko • Workpiece weight / carriage: 35 carriages with a workpiece weight of 300 kg Podpsz E R Abjfx Akijgu • Coating technology: Automatic powder coating with Gema Magic-Cylinder system • Manual coating: Gema manual coating system for rework and special parts • Modernizations: Continuously updated to the latest technology • Pretreatment: renewed in 2024/25 by Euroimpianti, a 5-chamber system independent of chemical suppliers was installed. The system is currently operated with Alufinish chemicals in a chrome-free process. The pretreatment has a fully automatic Medotec chemical dosing and monitoring system. The pressure pumps are also monitored to ensure that the pretreatment is 100% effective. The chamber width is designed for 700 mm. The cycle time is currently 5 minutes/chamber, but can be adjusted individually. System Equipment • Conveying technology with automatic workpiece transport • Pretreatment area • Drying and curing technology • Automatic powder coating • Powder recovery system • Gema Magic-Cylinder application technology • Gema manual coating system with corona and tribotechnology • Control and regulation technology • Wastewater treatment • Demineralized water treatment, 2-fold redundant Special Advantages • System is currently in productive use • Continuously maintained and modernized • Proven Eisenmann quality for continuous industrial operation • Suitable for large and long workpieces • High coating quality and process reliability • Immediate availability upon agreement • Large package of spare parts for pretreatment/pumps/application/conveying technology available The system is particularly suitable for companies in the fields of metal processing, steel construction, mechanical engineering, vehicle construction, and industrial contract coating. Since 2015, the system has consistently achieved GSB Master Seaproof certification. An inspection of the system is possible at any time by appointment. We will gladly provide further technical documents, layout drawings, photos, as well as information on throughput, oven dimensions, and conveying speed to interested buyers. Price: Negotiable Location: 7344 Stoob

Condition: good (used), PUMP AND VALVE ASSEMBLY FROM A WOOD TREATMENT AUTOCLAVE For sale, a complete pump assembly originating from an industrial wood treatment plant using an autoclave. The set was used in a vacuum-pressure wood treatment plant. The assembly includes, among other things: - a large industrial pump with an electric motor, - an additional vertical pump, - process tanks, - an extensive piping system, - flanged valves, - pneumatically controlled valves, - automation and control elements, - sensors and measuring equipment, - a steel support frame. The entire assembly is a component of the technological installation of the autoclave for wood treatment. This type of system is used to carry out the individual stages of the impregnation process, including vacuum creation, transport of the impregnating agent, and the pressure phase. In industrial impregnation plants, separate vacuum pumps, pressure pumps, and circulation/transfer pumps are used. The components bear markings indicating the manufacturers of the individual parts, including Sulzer and Actreg/Actreg Valves. Used, industrial condition. Visible signs of use, wear on the paint coating, and localized surface corrosion. Sold as seen in the photos. Individual components are not sold separately – the offer applies to the entire assembly shown. Inspection is possible on-site before purchase. Pgjdpfx Akoz Hrnbeiju Due to its size and weight, collection is required or transport must be arranged by the buyer.

Condition: excellent (used), LAGARDE 1-Cage Rotary Autoclave – Industrial Sterilization LAGARDE rotary autoclave with a capacity for 1 cage, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. Manufactured by LAGARDE, a specialist in autoclaves for the food industry, this equipment incorporates a load rotation system during the thermal cycle, which is particularly beneficial for products where heat transfer can be improved by the movement of the packaging. The combination of controlled heat treatment and rotation allows it to be used in a wide variety of canning and prepared food applications. MAIN FEATURES -Manufacturer: LAGARDE Pgedpfx Ajzw D T Hokisu -Type: Industrial rotary autoclave -Capacity: 1 cage -Application: sterilization / pasteurization -Load rotation system -Batch thermal processing -Horizontal chamber -Stainless steel construction -Large-diameter front door -Mechanical safety locking system -Motorized rotation drive -Automatic cycle control -Integrated control panel -Process piping and valve system -Designed for industrial food applications PROCESS The LAGARDE 1-cage rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The cage containing the packages is placed inside the chamber, and once closed, the programmed cycle is executed, controlling the different phases of heating, thermal maintenance, and cooling. During the process, the system allows for the rotation of the load, generating movement of the product inside the package in applications where this is appropriate. This can promote thermal transfer and treatment homogeneity, depending on the product, format, and recipe used. APPLICATIONS Particularly suitable for canning industries, manufacturers of prepared dishes, sauces, vegetable products, meat products, pet food, and other food industries that require sterilization or pasteurization processes. Depending on its configuration and process, it can be used with cans, jars, and other containers compatible with heat treatment and rotation in an autoclave. Its 1-cage configuration is particularly interesting for batch production, industrial trials, the development of new products, or facilities that require flexibility between different recipes and formats. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.