Used Stas Walking Floor Semitrailer for sale (19,302)

Condition: used, maximum load weight: 34,928 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper 50 cbm "AGRAR-LINER" First registered January 16, 2024, condition as NEW Dimensions i.L. (LxWxH) 8,912 x 2,350/ 2,450 x 2,280 mm (conical design) Empty weight only 7,072 kg Z-chassis cranked design Floor throughout in 4 mm HardoX steel HB450 Front wall and side walls 3 mm HardoX steel HB450 Sloping front wall, inside with access 2-wing combination doors with pendulum function, pneumatic post-release 2 pieces GRAIN SHIFT with 1x dust protection bag Roof roll tarpaulin reinforced design HYVA tipping ram type Alpha, suitable for high and low pressure - ALUMINUM saddle supports full load 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with anti-skid protection RSS Isdpsyv T Sxofx Amlotf WABCO Smartboard Lifting and lowering device Tires 385/65 R 22.5 Aluminum stepladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available immediately from us in FULL-SERVICE RENTAL-----

Condition: new, axle configuration: 3 axles, loading space volume: 15 m³, total length: 10,200 mm, total width: 2,500 mm, total height: 3,940 mm, suspension: air, tire size: 275/75R22,5, wheelbase: 7,020 mm, color: white, Year of construction: 2024, = Additional Options and Accessories = - Air suspension - Central lubrication = Remarks = The Wattsnew E-Box concrete mixer is an electrically driven concrete mixer. The drive unit (E-Box) is installed in place of the diesel engine and supplies power to the existing hydraulic pump as usual. Everything else remains the same, except the hydraulic pump is powered by an electric motor instead of a combustion engine. You can also easily electrify your existing concrete mixer trailer by removing the diesel engine unit and installing the E-Box. Thanks to its intelligent software, the E-Box uses little power and is extremely easy to operate. With just one button and one lever, you control the entire system. Charging is also very straightforward: after a workday, simply connect the E-Box to a charging station or a regular power outlet, and the batteries will be fully charged in five hours. The Wattsnew E-Box is completely emission-free. This means no air pollution from diesel exhaust, allowing you to work in a clean and safe environment. Local residents will also appreciate your use of an emissions-free and much quieter machine. Using electric vehicles and machinery in construction increases your chances of being awarded contracts, as customers and governments are increasingly demanding zero-emission equipment. Further information: = Further Information = General Information Year of manufacture: 2024 Applications: Construction and road building Material to be used: Concrete Registration number: OT-93-FF Isdpfxoxv Ry Re Amletf Axle configuration Tyre size: 275/75R22.5 Suspension: Air suspension Rear axle 1: Twin tyres; alloy wheels; max. axle load: 10,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 2: Twin tyres; alloy wheels; max. axle load: 10,000 kg; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Rear axle 3: Twin tyres; alloy wheels; max. axle load: 10,000 kg; steered; tyre tread left inside: 100%; tyre tread left outside: 100%; tyre tread right inside: 100%; tyre tread right outside: 100% Weights Unladen weight: 11,440 kg Payload: 31,560 kg Gross vehicle weight: 43,000 kg Functional Body manufacturer: Stetter AM 15000 Number of chambers: 1 Water installation: Yes Water tank: 500 l Hoses: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Financial Information Price: On request = Company Information = Our complete range can be found here:

Condition: used, maximum load weight: 33,400 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 09/2026, loading space length: 11,600 mm, loading space width: 2,350 mm, loading space height: 2,500 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 3,873 mm, Year of construction: 2018, Equipment: ABS, 3-axle STAS S 300CX FerroStar Tipper VIN: 000011 Chassis / Attachments: * Air suspension / raising & lowering * Lift axle (1st axle) * Lightweight aluminum legs * WABCO Smart Board * Alcoa Dura Bright alloy wheels * Tires: 385/65 R22.5 * Remaining tire tread: Front approx. 30/60% | Middle approx. 50/60% | Rear approx. 10/30% * 3 x Jost DC axles with disc brakes * 1 x PVC storage box * 2 x work lights * Steel chassis Body: * FerroStar HARDOX tipper body * Hyva front cylinder, max pressure 170 bar * Volume: approx. 68 m³ * Floor plate: 5 mm HARDOX 450 * Fixed walkway, access ladder on left * Sloping front wall * Double-wing door 50/50 without rubber seal * Double-leaf tailgate with locking rods * Additional safety latch with manual pneumatic operation * Roll tarp * Load pressure gauge Itodpfoyw Dn Tjx Amlsf Weights: * Gross weight: 42,000 kg * Payload: 33,400 kg * Unladen weight: 8,600 kg Other: * German registration * 1 previous owner * Main inspection (TÜV) valid until 09/2026 New main inspections, safety tests, or weight adjustments (de-rating/up-rating) available on request. We are also happy to assist with export/temporary registration plates as well as transport of your purchased vehicles within Germany. Contact us! --- We speak: German, English, and Russian! --- No liability for printing or typing errors. Subject to changes, prior sale and errors excepted! --- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. With over 11,000 m² of exhibition space, we offer a wide range of vehicles. Our corporate philosophy is characterized by fairness and seriousness. As customer satisfaction is very important to us, we provide a comprehensive service package and a competent contact person to assist you throughout the buying or selling process. See for yourself! Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to help organize special transports. Temporary/export license plates We are happy to help with obtaining export or short-term tags. Customs formalities We are happy to assist with customs procedures.

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 03/2027, loading space length: 1,055 mm, loading space width: 2,360 mm, loading space height: 2,160 mm, loading space volume: 53 m³, total width: 2,550 mm, total height: 3,829 mm, Year of construction: 2019, Equipment: ABS, 3-Axle STAS S 300CX ALU Tipping Trailer MultiSTAR-V100 VIN: 000737 Chassis / Attachments: * Air suspension / raising and lowering * Lift axle, 1st axle * Jost landing legs * WABCO Smart Board * Alcoa Dura-Bright aluminum rims * Tires: 385/65 R 22.5 * Tire tread remaining: Front ~60/50%, Middle ~90/80%, Rear ~90% * 3 x SAF tridem axles with disc brakes * 1 x PVC tool box * 2 x work lights * ALU chassis Body: * Aluminum box tipper * EDBRO front cylinder * Capacity: approx. 53 m³ Itodpfoyw Dntsx Amlof * Floor plate: 8 mm * Fixed walkway, access on the left * Combo door can be opened to the left + pendulum function * Manual locking * Roll cover * Extendable rear ladder under tipper body Weights: * Gross weight: 36,000 kg * Payload: 29,630 kg * Tare weight: 6,370 kg Other: * German registration * 1 previous owner * MOT & Safety Inspection 09 / 2026 ---- New main inspections, safety checks or weight reductions/increases available on request. We are happy to assist you in obtaining export/transfer plates, and can also arrange transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our corporate philosophy stands for fairness and reliability. Customer satisfaction is particularly important to us, so we offer our customers an excellent all-round service package and provide a competent contact person who will support you with the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Temporary/export license plates We are happy to help you obtain export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, maximum load weight: 30,380 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2010, next inspection (TÜV): 03/2027, loading space length: 8,830 mm, loading space width: 2,360 mm, loading space height: 1,900 mm, loading space volume: 40 m³, total width: 2,550 mm, total height: 3,580 mm, Year of construction: 2010, Equipment: ABS, 3-axle STAS S 300CX ALU tipping semi-trailer VIN: 000084 Chassis / Attachments: * Air suspension / raise & lower * Lifting axle, 1st axle * Jost landing legs * WABCO Smart Board * Tyres: 385/65 R22.5 Iodpfx Aoywqckemlstf * Remaining tyre tread: Front approx. 80%, Middle approx. 90/80%, Rear approx. 90% * 3 x Daimler Chrysler axles with disc brakes * 1 x PVC toolbox * 2 x work lights * ALU chassis Body: * ALU box body * EDBRO front cylinder * Volume: approx. 40 m³ * Floor plate 8 mm * Fixed walkway, access left & right * Rear door as swing flap with 4 x pneumatic locking hooks * 2 x manual safety locks * Sliding tarpaulin * Rear door with surrounding rubber seal Weights: * Gross weight: 36,000 kg * Payload: 30,380 kg * Unladen weight: 5,620 kg Other: * German registration * 1 previous owner * Main inspection + safety inspection 09/2026 New main inspections / safety inspections or weight changes (downgrades/upgrades) are possible upon request. We are happy to assist you in obtaining export/transfer license plates, and we can also arrange for delivery of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or spelling errors. Subject to change, prior sale and mistakes reserved. ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. The special strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On an area of 11,000 sqm, you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent comprehensive service package and provide them with a competent contact person to support them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you in loading your purchased vehicles. Organization of special transports We are happy to assist you with organizing special transports. Temporary/export license plates We are happy to assist you in obtaining export license plates/temporary plates. Customs clearance We are happy to assist you with customs matters.

Condition: used, empty load weight: 9,757 kg, maximum load weight: 32,243 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 13,127 mm, loading space width: 2,325 mm, loading space height: 2,755 mm, total length: 25,500 mm, total width: 39,570 mm, total height: 138,420 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2025, mileage: 1 km, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, color black, air suspension with lift axle, grain chute, lifting and lowering function, tipping body (dumper), lift axle on 1st and 3rd axle, roll tarpaulin, disc brakes, fixed side underrun protection, steel body, 1 storage box, foldable rear underrun protection, Duomatic coupling, load gauge, 2x 7-pin + 15-pin power connectors, working platform, Wabco SmartBoard, side LED work lights, pneumatic remote release, pneumatically foldable rear underrun protection, automatic lowering when tipping, Alcoa Dura-Bright wheels, single-wheel mudguards, broom and shovel holder, 2x LED reversing lights, aluminum ladder. Isdoydfvqjpfx Amljtf

Condition: used, maximum load weight: 34,127 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, Condition: Like NEW Mileage: only 16,120 km Internal dimensions (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,827 kg Z-chassis with cranked design Continuous 5 mm Hardox steel HB450 floor Front wall and side walls 4 / 3 mm Hardox steel HB450 Sloped front wall, interior with access ladder Double-wing portal doors, pneumatic rear release Heavy-duty roof roll tarp with CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure Full-load crank landing gear 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with starting aid WABCO Trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the right Itsdjyl Tgaepfx Amlof 4x LED reversing lights RENTING is the new BUYING – available immediately from us, also with FULL-SERVICE RENTAL

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, condition: like NEW Mileage: 62,270 km Dimensions inside (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (conical design in width) Unladen weight: only 7,820 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4 / 3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing rear portal doors with pneumatic remote unlocking GRAIN SLIDE with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, type Alpha, suitable for high and low pressure Crank landing legs, rated for full load 2x pneumatic vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO trailer EBS with RSS roll stability control WABCO Smartboard Itsdjyl Tfvepfx Amljf Automatic tipping lowering system Hydraulic lift and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium wheels Aluminium access ladder Shovel and broom holder Right-hand toolbox 4x LED reverse lights RENTING is the new BUYING – also available from us as a FULL-SERVICE RENTAL, immediately available-----

Condition: used, first registration: 08/2012, Year of construction: 2012, REISCH RSBS-35/24 LK 82 m³ Walking Floor Trailer with Grain Hopper FLOOR: VERY GOOD CONDITION! ● Body: Full aluminum ● Frame: Steel ● 82 m³ capacity ● 3 x BPW ECO Plus axles ● Air suspension Isdeyutyxopfx Amletf ● Lifting axle ● Raising/lowering system ● Disc brakes ● Access platform ● Grain hopper and rear slider ● Roll tarp ● ALU sliding wall ● Hydraulic locking ● WABCO smartboard ● ABS ● ALCOA rims ● Tyres: 385/65 R 22.5 ● Tyre tread: 14/13 * 9/13 * 5/13 ● Gross weight: 35,000 kg ● Unladen weight: 7,750 kg! ● Total length: 14,050 mm ● Internal dimensions (incl. grain hopper): 12,600 x 2,470 x 2,510 mm - German trailer! - 1st owner! - TÜV/HU: new! Errors and prior sale excepted! = More information = Please contact Joannis Arpantzanis or Kai Bühler for further details.

Condition: used, first registration: 10/2011, Year of construction: 2011, REISCH 82 m³ Moving Floor Semi-Trailer Walkingfloor with Grain Hopper FLOOR: IN VERY GOOD CONDITION! ● Body: Full aluminum ● Chassis: Steel ● Capacity: 82 m³ ● 3 x BPW ECO Plus axles ● Air suspension ● Lift axle ● Raise/lower system ● Disc brakes Iodjyutyrspfx Amletf ● Platform ● Rear grain hopper and slide ● Rolling tarpaulin ● Aluminum sliding wall ● Hydraulic locking ● WABCO Smartboard ● ABS ● ALCOA rims ● Tyres: 385/65 R 22.5 ● GVW: 35,000 kg ● Curb weight: 7,700 kg! ● Overall length: 14,050 mm ● Internal dimensions (incl. grain hopper): 12,600 x 2,470 x 2,510 mm - German trailer! - 1st owner! - TÜV / roadworthiness test: new! Errors and prior sale excepted! = More information = Payload: 1 kg For more information, contact Joannis Arpantzanis or Kai Bühler.

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Ijdpfx Amoxf Spfelstf Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Aluminium (15-6-12) Ijdpfsyiw T Ejx Amlstf Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories Itsdpfx Aexf Sn Ijmlof 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension Disc brakes 430 mm “off-road version” SAF-Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally mounted to chassis longitudinal member 3rd axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, lift-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70%, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" - bolted into an 8 mm thick plate Landing gear Mechanical landing legs, 2 speeds, 2x20t support load, with swing foot for air suspension Brake system According to ECE regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, aluminium air tank system Electrical system According to StVZO guidelines with 2 five-chamber Aspöck type lights, 24V system with 2x7 and 1x15 pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly laid in plastic pipes Tipping body / Dump body “smooth construction” Fully welded inside Aluminium dump body, side walls with 30 mm thick plank profiles (2-3 mm) welded 600 mm wide, floor 6 mm thick, high wear-resistant alloy (5383H34/HB 110) with 45-degree bevel to side wall, front wall 4 mm reinforced, inclined design, rear wall designed as a universal door, straight design with 2 wing doors in 2/3–1/3 configuration and a grain chute, ALU round profile welded laterally and below to seal door gap on rear doors, rear doors partly clad with smooth aluminium. Universal door operated automatic-pneumatic, lockable with separate lever, aluminium rear brace pivotable, two hold-downs with rubber buffer on the dump body fixed to the frame at the front wall. Hydraulic system Tipping cylinder with "rotule" suspension (light) Hydraulic cylinder mounted on front wall with a working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and loose 1" half, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap over the full vehicle width attached to underrun guard, no spare wheel holder, aluminium, foldable side underrun protection right side, large toolbox type 860, approx. 3 m aluminium ladder, 3 central aluminium swing bows raised approx. 150 mm, additionally a centrally mounted bow holder for positioning up to 2 bows to widen the loading width, roll tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with roll tarp system, continuous rubber cord at the rear closure of the tarp with two tension hooks to be fixed on the rear swing bow, catwalk on the frame in chassis colour with access left and right, tarpaulin closure to the side with quick-release fastener, rear tarp closure with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium, 2 "Clear-Pass" spray flaps on mudguard according to EU standard, aluminium grain hopper fixed to the side of the frame with plan bag, holders for shovel, broom and scraper mounted above the axles, etc. Itsdpfjyiw T Sox Amlof Unladen weight: 5,960 kg Offer and images subject to change.

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-Axle Stas S 300CX Tipper Trailer VIN: 080246 Chassis / Attachments: * Air suspension / lift and lower function * Lift axle on 1st axle * Weweler landing gears * WABCO Smart Board * Alcoa aluminum rims * Tyres: 385/65 R.22.5 * Tyre tread depth: 1=90% 2=as new 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage boxes * 2x work lights * ALU chassis Body: * Tipper trailer * Hyva tipping cylinder, max. 220 bar * Capacity: approx. 54 m³ * 2x pneumatic locks * Rolling tarpaulin * Front standing platform * 50:50 swing doors at rear Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Unladen weight: 6,050 kg Other: * German registration * Safety inspection valid till 06/2026 New main inspections/safety inspections or adjustments to gross weight (derating/upgrading) available upon request. We are happy to assist you in obtaining export/temporary number plates as well as organizing transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for typographical or printing errors. Subject to change, prior sale, and mistakes!---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our core strength lies in the sale of new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. Because customer satisfaction is important to us, we offer an excellent all-round service package and provide a dedicated contact person to assist you throughout the purchase or sale process. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist with arranging special transports. Itodpfsyl N N Dex Amlef Temporary/export number plates We can help you obtain export or short-term number plates. Customs formalities We are happy to assist you with customs clearance.

Condition: good (used), axle configuration: > 3 axles, first registration: 01/2003, total length: 13,670 mm, total width: 2,550 mm, wheelbase: 10,240 mm, color: other, Year of construction: 2003, Equipment: crane, Axle configuration Rear axle 1: Lift axle Rear axle 2: Lift axle Rear axle 3: Steering Rear axle 4: Steering Weights Empty weight: 8.480 kg Carrying capacity: 44.520 kg GVW: 53.000 kg Functional Crane: Hiab 130R-F2, year of manufacture 2000 Itodpfjydbxuox Amlof Condition Technical condition: good Visual appearance: good Identification Registration number: OH-97-DD = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible.Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present.We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration.Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m.You can find us at:Middelingenseweg 22 5321 JH Hedel The NetherlandsAnd reach us at:Trucks: Passenger cars: Website: Email:

Condition: used, empty load weight: 7,910 kg, maximum load weight: 31,090 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 03/2018, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: silver, Year of construction: 2018, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40573 Stas, S 300CX * Year of manufacture: 2018 * ABS, anti-lock braking system * Air suspension * Lift axle * Air connection coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage box / toolbox * Aluminium tipping body * Access platform * Sliding tarpaulin * Grain discharge slider * Suspension: air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,910 kg * Payload: 31,090 kg * Perm. gross vehicle weight: 39,000 kg * Tyre condition 1st axle: 40% -- 40% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 40% -- 40% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 50% -- 50% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Wabco SmartBoard * Rear support * Wear plates left and right * Folding underrun protection Disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documentation * Ordering of export / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspection, registration service Itodpfx Ajyicqyomljf * Transfer of commercial vehicles Please contact our trained staff – we will be happy to advise you.

Condition: used, maximum load weight: 32,246 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First Registration 04/2025 Internal Dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, with interior access ladder Rear portal doors 50:50 with pneumatic sequential unlocking Reinforced roof tarpaulin HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST crank landing gears, full load SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE WABCO Trailer EBS with RSS roll stability control WABCO Smartboard Lifting and lowering device Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Itodpfx Asygdvhsmljf Left side toolbox 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental.

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, sorting belt, sorting conveyor belt, readout conveyor belt -Side walls made of: stainless steel -Speed: 118 m/min Itjdpfeffukrsx Amlsf -Drive: 0.75 kW -Belt width: 590 mm -Length: 2000 mm -Transport dimensions: 4360/1170/H1170 mm -Weight: 684 kg

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights Iodpfx Aoxriu Esmlstf RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: used, overall weight: 39,000 kg, first registration: 01/2013, next inspection (TÜV): 07/2025, Equipment: ABS, Volume tipper 59 cubic meters Full aluminum Itsdpfxevwhvpo Amlsf Empty weight 7570 kg SAF axles with disc brakes Tires 60% Good condition Belgian registration Price 23,900 euros net

Condition: used, axle configuration: 2 axles, first registration: 05/1986, suspension: air, color: other, Year of construction: 1986, Equipment: tail-lift, = Additional options and accessories = Ijdpfxewwtkde Amlstf - Air suspension = Further information = Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 40%; Tyre tread right: 40% Rear axle 2: Steered; Tyre tread left: 40%; Tyre tread right: 40% Overall condition: average Technical condition: average Visual condition: average Damages: none Price: On request

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Itsdewnfz Nopfx Amljf Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts Itsdsfi Nmuopfx Amlof mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, Westinghouse two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, Edbro hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, preparation for floor vibrator, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST Itedpfxou Dvw Es Amljf COLOR FREELY SELECTABLE +590¤ Transfer costs *Pictures and offers are subject to change*