Used Spectroline Spectroline Es-160/Fbe Uv Lamp for sale (16,776)

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: • Weld seam inspection • Shaft, axle, and machine component examination Hnodpfexl Dbtsx Aicjr • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: excellent (used), For sale: professional MAGNAFLUX UVM3059 UV-A radiation intensity meter – used for NDT inspections (non-destructive testing, penetrant testing, fluorescent inspection, etc.). The device is in very good technical and visual condition, ready for immediate use. • Model: UVM3059 • Manufacturer: MAGNAFLUX GmbH • Power supply: 9 V • Measurement range: 0.5 – 99.9 W/m² • Serial number: 381 • Calibration date: 14/08/2023 • Next inspection due: 2024 • Set includes: original transport case, foam protection, sensor, documentation on the housing The device is fully functional, the display works correctly, and the sensor responds properly to UV-A radiation. Ready for use in laboratory, workshop, production, or quality control. Hnedpfx Aioxlub Decer

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable Hjdpfx Aiswx Dctecjnr * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing Hjdsw U H Sbepfx Aicenr * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, rotational speed (min.): 1,460 rpm, rotational speed (max.): 1,460 rpm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 250 kg, INDUSTRIAL PISTON COMPRESSOR WITH SIEMENS 1LA3 11 KW MOTOR Industrial twin-cylinder V-configuration piston compressor driven by a SIEMENS 1LA3 three-phase motor. From an industrial company liquidation (insolvency proceedings) — not faulty, fully available for inspection. ═════ COMPRESSOR SPECIFICATIONS ═════ - Type: V-configuration twin-cylinder piston compressor - Cylinder head: heavy cast iron with cooling fins - Transmission: belt drive with large flywheel - Air intake: 2 lateral filters with caps - Electrical cabinet with main switch included - Robust integrated metal base frame - Machine N°: 1101 - Estimated capacity: 1,000-1,800 l/min - Working pressure: 8-10 bar ═════ MOTOR SPECIFICATIONS - SIEMENS 1LA3 ═════ - Brand: SIEMENS (premium German manufacturer) - Model: 1LA3 163-4AA-20 - Frame size: IEC 160M - Power: 15 HP / 11 kW - Voltage: 220/380V three-phase - Speed: 1,460 rpm (4-pole motor) - cos φ: 0.86 - Frequency: 50 Hz - Protection class: IP44 - Insulation class: B Hnedpozawudefx Aicer - Mounting form: B3 (foot-mounted) - Standard: VDE 0530 - Serial number: LCL2055152 - Connection: VAY 38/22 The SIEMENS 1LA3 series is one of the most reliable industrial motor lines, manufactured between the late 80s and mid 90s. Known for excellent winding quality, heavy-duty bearings, and exceptional longevity. Service parts and technical support available worldwide. ═════ INCLUDED IN THE SALE ═════ ✓ Complete twin-cylinder compressor head ✓ SIEMENS 1LA3 11 kW motor ✓ Belt drive system with large flywheel ✓ Two air intake filters with caps ✓ Electrical cabinet with main switch ✓ Robust metal base frame NOT INCLUDED: ✗ Air tank / receiver (must be added by buyer) ═════ CONDITION ═════ - From industrial closure (not from breakdown) - Good general appearance, clean and complete - SIEMENS motor — premium brand with worldwide service and spare parts availability - Sold as-is, full inspection welcome before pickup - No warranty implied ═════ APPLICATIONS ═════ Professional industrial compressor suitable for: - Medium-sized mechanical workshops with multiple simultaneous pneumatic stations - Metal and aluminum carpentry workshops - Body shops and industrial paint booths - Boilermaking with heavy pneumatic tools - General light industrial production - Tire shops and automotive workshops Equivalent new compressor on the market: €4,500-7,000 The motor alone (SIEMENS 1LA3 163-4AA-20 IEC 160M) has a standalone resale value of €400-700 as an industrial spare part. ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain - Weight: approx. 250 kg - Loading: forklift required at pickup - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport and customs

Condition: excellent (used), Year of construction: 2019, HSM V Press 1160 plus Pressing force 532 kN, opening width 1,195 m, opening height 0.65 m, drive power 4 kW, press type BP, dead weight 2.43 t, transport length 1.78 m, transport width 1.568 m, transport height 2.995 m, press type baler. Press immediately ready for use. Hedol Uvukepfx Aicenr

Condition: used, UV dryer Hsdpfx Aov Sauaoicenr Comes from ongoing production

Condition: used, Year of construction: 2022,

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste Hnodpfx Asyqw Sqjicsr MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 7FBEST15 12090, Year of construction: 2009, operating hours: 1,319 h, load capacity: 1,500 kg, lifting height: 3,250 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, gearing type: automatic, battery capacity: 920 Ah, remaining battery capacity: 65 %, battery voltage: 24 V, fork carriage width: 990 mm, fork length: 1,195 mm, fork width: 100 mm, front tire type: cushion tires (black), front tire size: 18x7-8, rear tire type: cushion tires (black), rear tire size: 18x7-8, empty load weight: 2,520 kg, color: yellow, Equipment: head guard, lighting, sideshift, trailer coupling, Toyota 7FBEST 15 3-wheel electric forklift from year 2009 with a load capacity of 1,500 kg. The mast is a duplex with a lifting height of 3,250 mm. Equipped with a side shifter and fork positioner. Hydraulics are leak-free, service performed! All work carried out by an authorized dealer! The forklift is in very good condition, UVV inspection available upon request. Technical data: Manufacturer: Toyota Model: 7FBEST 15 Year: 2009 Rated load: 1,210 kg Maximum load: 1,500 kg Unladen weight: 2,520 kg Operating hours: 1,319 h Overall height: 2,150 mm Fork length: 1,195 mm Lifting height: 3,250 mm Mast: Duplex 3-wheel Side shifter Fork positioner Cabin Battery: 24V 8PzS 920 PB Hnjdpfx Ajy N A Shjicer Remaining capacity: approx. 65% (operating time per charge approx. 5-6 hours) Including charger Transport available VAT can be shown separately Net export available with a valid EU VAT number or export to a third country.

Year of construction: 1995, condition: used, Tunnel pasteurizer, make Simonazzi, type: Vesuvio 640, in stainless steel, up to 36.000 bph, with 6 zones, with plastic chain, steam heated, width: ~4.000mm, length ~14.000mm, built 1995, in 2003 overhauled by Brewpack, control cabinet in s/s, pasteurizer dismantled and stored Hedol Slyzopfx Aiconr

Condition: used, functionality: unexamined, load capacity: 1,600 kg, lifting height: 6,300 mm, mast type: triplex, Equipment: pallet forks, Used Crown reach truck with charger Hjdjxviffepfx Aiconr

Condition: new, stroke: max.450daylight: max. 900motor: 22performance of pump: 48oil filling: 90messurements (LxWxH): 2500x1200x2800weight approx.: 4000max. diameter: 330pressure: 300Pressure adjustment via rotary knob Hodpfx Aijutuyvscjnr Motorized control via hand lever Handwheel for laterally movable cylinder Hydraulic unit mounted on the lower side of the frame Clear opening: 2000 mm × 550 mm Cylinder travel: 500 mm from the center to both sides

Condition: new, motor power: 30performance of pump: 65oil filling: 150messurements (LxWxH): 3700x1500x3200weight approx.: ca. 5000Cylinder: Ø 400pressure: 500Pressure adjustment via rotary knob Hnjdpeutuy Nofx Aicsr Motorized control via hand lever Handwheel for laterally movable cylinder Hydraulic unit mounted on the lower side next to the frame Clear opening: 1650 mm × 550 mm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,870 kg, lifting power: 700 kg/m, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, digging bucket width: 120 mm, Year of construction: 2025, Equipment: additional headlights, head guard, standard shovel, trailer coupling, The H&R 1607T telehandler is our smallest loader with a cab. It is exceptionally maneuverable and can be used wherever space is limited. With a lifting capacity of 700 kg, the H&R 1607T telehandler lifts loads weighing up to 700 kg to a height of 2.82 m (bottom edge of the standard pallet fork). Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1607 loader reaches a top speed of approximately 16 km/h and is comfortable to drive. The additional 3rd and 4th hydraulic control circuits allow for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-mounted tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Hjdpfx Aiev Tabiscsnr Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1607T Skid Steer Loader • Fully equipped • Extensively optimized in Germany • Telescopic boom for extended reach • Ideal for tight work environments • Includes standard 120cm bucket and pallet forks • Comfortable cab with heating, ventilation, and radio (USB/MP3) • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €19,290.00 VAT: €3,665.10 Gross: €22,955.10 Financing available! Optional 2-year warranty €595 TÜV (road approval) €870 Transport within Germany and Austria for an additional charge Please provide us with your address; we will be happy to provide you with a free, non-binding quote. Technical specifications Lifting capacity: 700 kg Lifting height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (bottom edge of standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: Perkins 3-cylinder diesel Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 2964 x 1160 x 2340 mm Weight: 1740 kg Standard tires: 26 x 12.00-12 Accessories and spare parts are not included. Available from us. Please provide your phone number when making inquiries!

Condition: excellent (used), Year of construction: 1995, FLUIDPROGRESS mobile hydraulic power supply unit 1.6dm3/min 160bar Type: 25TE1.6 160/JD 24V Year of construction approx. 1995 Nominal operating pressure: 120 bar three section system. Operating pressure: max 160 bar Flow rate: approx. 1.6 dm3/min. Hodpfoi Dnpxjx Aicjnr Tank capacity: 200 liters Engine power: 0.75 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve ATOS ORSTA hydraulics Space requirements Length: 1020 mm, width: 610 mm, height: 1000 mm Own weight: approx. 250 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Hnedpfxeu D Dhxj Aicsr Automatic greasing system. Optionally sheet feeder winder and straightener.

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. Hodpfjd Aqqzjx Aicsnr • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm Hedpfxsvpagds Aicjnr electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions:

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400- Pressure adjustment via rotary controlMotorized control via hand leverManually adjustable sliding cylinderClear opening: 1600 × 550 mmStar-delta connection for motor driveHydraulic tank incl. motor is mounted on the lower side of the frame Options / surcharges: Pressure control valve: ¤400.00 Speed throttle valve: ¤400.00 Anti-rotation device for piston: ¤250.00 Handwheel for sliding cylinder: ¤950.00 Hnsdpfx Aijutuy Aecjr Cylinder adjustable via geared motor: ¤1,700.00 Table support plate (1300 × 850 × 150 mm): ¤3,300.00 All images are for illustrative purposes only and are symbolic photos. The actual equipment may vary slightly.

Condition: new, Year of construction: 2025, machine/vehicle number: 472684923, Gasparin Jaw Crusher GI107CV Vesuvio, mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a Grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment featuring the patented HCS system (Hydraulic Crushing System), VESUVIO is the best solution for the requirements of professionals and rental companies. Production capacity: approx. 320 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Jaw gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Tank pump Magnetic separator Warranty 1 year, up to a maximum number of operating hours from the start of operation Technical data: Jaw crusher 1020 x 700 mm Crushing gap from 45 to 180 mm Hopper 5 m³ - 2000 x 3960 mm Two-deck vibrating screen 1020 x 1800 mm Main conveyor belt 800 x 9600 mm 4-cylinder diesel engine with constant speed, 82 HP / 60 kW, emission stage V Control panel Tracked chassis 400 x 3310 mm Hnedpfx Aiohd I Rzecer Weight: kg Transport length 12900 mm Transport width: 2530 mm Transport height 3200 mm Further information: Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good

Condition: new, Year of construction: 2025, machine/vehicle number: 857226635, Gasparin Jaw Crusher GI107C VESUVIO Mobile jaw crusher on a tracked chassis The mobile crusher GI107 VESUVIO stands for versatility and can be configured in two different ways. Equipped with a grizzly vibrating feeder (GI107C), it is suitable for more traditional applications. With a vibrating feeder and a pre-screen, the machine (GI107CV) is suitable for demanding applications with high fines content and high material moisture. With its standard equipment, including the patented HCS system (Hydraulic Crushing System), VESUVIO is the best answer to the requirements of professionals and rental companies. Production capacity: approx. 300 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approximately 30%. Crushing gap hydraulically adjustable, even during the crushing process Fast locking system with wedges and tilting cylinders Discharge height 3000 mm Dust extraction Tank pump Magnetic separator Warranty: 1 year, up to a maximum of operating hours from the start of operation of the system Technical data: Hsdpfehd I Rwex Aiconr Jaw crusher: 1020 x 700 mm Crushing gap: 45 to 180 mm Feed hopper: 5 m³ - 2000 x 3960 mm Grizzly feeder: 970 x 3600 mm Main conveyor belt: 800 x 9600 mm 4-cylinder diesel engine with constant speed: 82 hp / 60 kW, emission stage V Control panel Tracked chassis: 400 x 3310 mm Weight: kg Transport length: 12900 mm Transport width: 2530 mm Transport height: 3200 mm Further information Application: Construction, General condition: very good, Technical condition: very good, Optical condition: very good, Delivery terms: EXW.

Condition: used, functionality: fully functional, Year of construction: 1994, Residual concrete recycling plant Feeding with screw conveyor Hnsdpfxjywn U Rs Aicor Pumps Agitators

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. Hsdpfx Ajv S Npysicenr CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations.

Condition: new, pressure: 40bending length: 1600column width: 1980motor: 4slide stroke - max.: 150opening width: 370CNC Press break KK Industries 40x1600 4 Axis Y1-Y2-X-R mit CNC Bombing Technical Parameters:Nominal Pressing Force: 63 kN Bending Length: 1600 mm Distance Between Columns: 1980 mm Throat Depth: 250 mm Slider Stroke: 150 mm Maximum Opening: 370 mm Slider Down Speed: 180 mm/s Slider Return Speed: 150 mm/s Slider Working Speed: 15 mm/s Main Motor Power: 4 kW CNC System: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 90 L Hnodpfx Ajwacq Ejicjr Back Gauge:X-Axis:X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Motor Power: 0.85 kW R-Axis:R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeat Positioning Accuracy: ±0.015 mm Dimensions and Weight:Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Motor Power (additional): 0.85 kW Delem T53 Control System (additional cost 5,000¤)