Used Sicmi Psv 50 for sale (33,313)

Condition: good (used), Year of construction: 2018, operating hours: 4,548 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 4,548 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2018 Capacity: 5,000 kg Lifting height: 4,080 mm Overall height: 2,850 mm Equipped with sideshift Equipped with fork spreader 4,548 operating hours Fork length: 2,200 mm Battery from 2018 with external charger Ijdpfey R Akmox Aifstg

Condition: good (used), Year of construction: 2020, operating hours: 6,839 h, load capacity: 5,000 kg, lifting height: 6,280 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, empty load weight: 8,000 kg, mileage: 6,839 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2020 Capacity: 5,000 kg Lifting height of 6,280 mm Passage height 3,000 mm Equipped with: FREELIFT, SIDESHIFT, and FORK SPREADER 6,839 operating hours Battery Automatic filling system with external charger Watch the video on YouTube Itsdoy R Admspfx Aifog

Condition: used, Year of construction: 2001, Industrial cooling lubricant or oil cleaning system Belt filter system for cleaning cooling lubricants with cooling unit The system is a centralised system for cleaning and processing cooling lubricants or oils used in metal-cutting production (e.g. grinding, milling, turning) Iedoy S D E Uepfx Aifetg It combines mechanical filtration (belt filter), liquid storage and temperature control by means of an integrated cooling unit. General information Machine type: Centralised system for cooling lubricant preparation Filter unit manufacturer: KNOLL Maschinenbau GmbH, Bad Saulgau Type: PF160 / 200 Year of manufacture: 2002 Reference number: 80.0917 Manufacturer cooling unit: HYFRA Industriekühlanlagen GmbH, Krunkel Type: TRK 50 EF-SS Serial number: Chiller year of construction: 2001 2. technical data - chiller (HYFRA TRK 50 EF-SS) Cooling capacity: 2000 W Max. Ambient temperature: 37 °C Permissible operating overpressure: 29.5 bar Refrigerant: R 407c Voltage: 3~ / PE / 400 V Frequency: 50 Hz Max. Operating current: 5.9 A Connected load: 3.3 kW Water filling weight (total): approx. 160 kg 3. function & area of application The system is used for centralised cleaning, cooling and recirculation of cooling lubricants or grinding oil in metal-cutting operations. It consists of a belt filter module (KNOLL PF160/200) for the filtration of solids and chips, a cooling unit (HYFRA TRK 50 EF-SS) for temperature control of the liquids Translated with (free version)

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain turning speed range - main spindle 20 - 9.000 min/-1 power capacity - main spindel 9 / 13 kW max. Torque 57 / 82 Nm tool taper ISO 40 DIN 69871 Itjdsxmag Ujpfx Aifog table diameter 700 x 500 mm swivellable B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg number of T-slots 7 T-slot - distance 63 mm T-slot - width 14H7 mm center hole 30H7 mm number of toolpositions 16 pos. tool taper ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6,0 kg max. total weight 50 kg feed speeds max. 10.000 mm/min rapid traverse 12 m/min input unit 0,01 mm total power requirement 17 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - MachiningCenter Univresal DECKEL MAHO - DMU 50 T - 5 Axis (3 + 2) - Swivel-Rotary-Table incl. Angle-Specification (manual Axis B+C via Handwheel)

Condition: used, Year of construction: 2018, liter capacity 600 l Pressure of pump 2 / 3 / 40 bar control Schütze / Contactors total power requirement 11 kVA weight of the machine ca. 450 kg dimensions of the machine ca. 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m Itedpfx Asx Urn Aoifeg 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m

Condition: used, Year of construction: 1975, filling amount ca. 250 l basket dimensions 560 x 260 x 40 mm Ijdpfx Ajym D Ahsifjtg dimensions of the machine ca. 1,25 x 0,70 x 1,20 m SYSTEM CHEMIE - T 50 Dive Wash Unit - Immersion Tank Dimensions: 585 x 385 x 500 mm - Draining Area Dimensions: 400 x 375 mm - 2x Storage Rack Dimensions: 400 x 350 x 210 mm

Condition: used, Używana klaryfikująca wirówka talerzowa produkcji Alfa Laval model BTPX 205SGD-34CDP-50 wykonana ze stali kwasoodpornej. Całość zamontowana jest na podstawie razem z systemem sterylizacji parą. Wirówka napędzana jest silnikiem elektrycznym o mocy 6,5 kW, 415 V, 2900 obr./min, 3 fazy, 50 Hz. Maksymalne obroty bąka wynoszą 9650 obr./min. Na wyposażeniu jest panel sterowania i narzędzia. Ijdpfjyh I Uuox Aifetg

Condition: good (used), Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB Isdpfxsvmpgne Aifjtg -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Condition: good (used), Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Hydraulic pulling cylinder: with integrated hand pump -Traction: 50 tons -Stroke: 110mm -Piston rod: Ø 80 mm Ijdpfxslxulcs Aifstg -Shots: inside 145 x 47 mm, see photos -Number: 1x cylinder available -Price per piece -Dimensions: 810/155/H410 mm -Weight: 66 kg/pc.

Condition: used, Year of construction: 2019, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SlimLine Siemens turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range B: -5 / +110 ° rotation range C: 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 8,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 2,7 sec change-time chip to chip 7,0 sec rapid traverse X/Y/Z: 30 m/min Feed force 4,5 kN feed speeds 1 - 30.000 mm/min total power requirement 30 kVA weight of the machine ca. 4,7 t dimensions of the machine ca. 4,5 x 3,5 x 3,2 m Isdpfx Ajyw Titjifstg CNC - Milling Machine Universal DMG MORI - CMX 50 U - 5 Axis - swivable rotary table - Spindle-hrs.: only ca. 2264h - Power On Hours: ca. 6706h - incl. div. cutting inserts, milling cutters, mounting aids

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Bale press Presto HPK 50 BS, year of manufacture 2011, with Wirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Type: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Infeed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Infeed volume, max. 1.23 m³ Cycle time: 19 s Binding: 4-fold Throughput at 35 kg/cbm: 6 t/h 60 kg/cbm: 9.6 t/h 100 kg/cbm: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (L x W x H) Machine weight: approx. 12,000 kg Data for chain belt conveyor Manufacturer: Horstmann Type: PK 1100/11 Year of manufacture: 2011 Belt width 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Loading length approx. 3000 mm Rising section approx. 5000 mm Gooseneck approx. 1000 mm The press is still in operation and can be inspected under operating conditions. It will be available from the beginning of June 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is possible, and may be withdrawn at any time. Iodoy Ticzopfx Aifetg Inspections can be arranged by appointment. The sale is made against prepayment, ex works, without any warranty.

Condition: ready for operation (used), * Brand: dbr Fördertechnik Ijdoy R Rvwopfx Aifetg * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW * Incl.: springs and springsupport. * Stock: 1 piece.

Condition: used, Colour: Grey - Documentation available: No - CE certificate present: No - Serial number: 50172 - Power [kW]: 5.0 - Number of outputs [pcs]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Isdpewh Nuysfx Aifjtg Peter Stroomberg

Condition: used, total height: 1,620 mm, total length: 1,750 mm, total width: 1,400 mm, Colour: Grey Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 500 - Y-axis travel [mm]: 230 - Z-axis travel [mm]: 330 - Table width [mm]: 720 - Table depth [mm]: 200 - Magnet width [mm]: 460 - Magnet depth [mm]: 180 - Options: External cooling Itodpfsyh Amlex Aifjg - Transport dimensions: 1750mm x 1400mm x 1620mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, - Brand: VMI - Model: Phébus 2172 SEW - Machine No.: 147599 - Flour capacity: 50 kg - Dough capacity: 80 kg - Bowl capacity: 170 L - Voltage: 400 V - Current: 24.3 A - Power: 7 kW - Capacity: 50 kg - Bowl: fixed - Bowl volume: 170 L - 1 timer - 2 speeds - Safety: thermal protection - Head safety: integrated protection - Chassis: tubular frame with stainless steel feet - Casing: ABS-PMMA Itsdpfsy Spa Rex Aifjg - Lid: liftable by lever - Head: liftable by lever - Start: progressive tool start-up

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Ijdpfsy R Npiex Aifetg Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Iodey R Npcepfx Aifotg Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Isdpjwvht Rsfx Aifjtg Year: 2015

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Width 4500 mm Ijdpev Dia Aofx Aifotg Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Isdpfxsyrdplo Aifetg Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Iodpfoyub Spox Aifotg Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Iodpfx Aox Sx D Sjifetg

Condition: good (used), Year of construction: 1989, Universal head (U-25) Coolant system Hydraulic tool clamping X-Axis: 5000mm Y-Axis: 1200mm Itodpjwq Rkusfx Aifeg Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 7000 Power on spindle:19kW Spindle speeds: 14 - 2500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:7000mm/min. Length: 11225mm Width: 4100mm Height: 3200mm Weight: 19000kg

Condition: new, HOERBIGER MSV322BE06P Id-No.: HV03115 50/11 B4 directional seat valve, unused in original packaging, 100% functional, delivery as shown in the photos. Iedpfx Ajy Srpnsifotg

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data Manufacturer: Kisters Maschinenbau GmbH Model: Wrap Around Packer 420/50 Machine Type: Wrap-around packer / secondary packaging machine Year of Manufacture: 2001 Capacity: up to approx. 50,000 bottles/hour Operating Hours: 16,976 h Application: Packaging of PET one-way bottles Previous Use: PET one-way beverage line Current Status: Taken out of operation due to line reconfiguration Bottle Formats: 0.33 l, 0.355 l, 0.5 l Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 inkl. shrink application for trays  Listed Formats: 0.33 l LNB 2x12 tray 0.355 l LN 2x12 tray 0.33 l LNB 4x6 tray 0.355 l KN 4x6 tray 0.33 l LNB 3x8 tray 0.355 l LN 3x8 tray 0.5 l LN 4x6 tray 0.5 l LN 6x4 tray 0.5 l LN 4x6 KLW full carton 0.33 l LN 4x6 loose wrap-around 0.33 l LNB 4x6 90° tray 0.355 l LN 4x6 90° tray 0.33 l BA 4x6 loose wrap-around 0.33 l BA 3x4 loose wrap-around 0.33 l Miller 4x6 loose wrap-around 0.33 l Salitos 4x6 loose wrap-around 0.33 l Vichy 4x6 tray cluster 0.33 l LN 4x6 tray cluster 0.33 l LN LCE 4x6 full carton 0.33 l EW 4x6 export full carton 0.33 l EW 4x6 export tray 0.5 l EW 4x5 loose wrap-around Ijdsy Sidvopfx Aifjtg