Used Servo Drive With Linear Guide for sale (27,636)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Kdedpfx Anezdny Rewon Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 Kdjdpfx Aoyh Huyonwjn -Number: 3 servo motors available -Price: per piece -Dimensions: 450/190/H255 mm -Weight: 33 kg/pc.

Condition: used, Year of construction: 2017, operating hours: 3,122 h, 2017 | Takeuchi TB23R with 3 excavator buckets | Used Mini Excavator < 7t | 3122 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 14900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 60 inspection points 42 approved ✅ 18 imperfect ℹ️ 0 issues ⚠️ Kdodpfezfiz Ejx Anwsn 📌 Inspector's Comment: Excavator in good condition despite the years. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40721 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, Filling heads: 8 volumetric filling heads Kodpfxjzfpq Tj Anwsdn Filling volume: 5 ml - 5,000 ml Capacity: 30 - 100 bottles per minute Suitable for pharmaceutical, chemical, and food products.

Condition: excellent (used), Year of construction: 2019, color: white, Attractive 2019 20-foot standard shipping container (8'6") Internal dimensions: 5.90 x 2.35 x 2.40 m (L x W x H) Lashing points on the left and right on the floor and on the ceiling, hooks for securing the load CSC: 02/2029 = Further information = Year of manufacture: April 2019 Model year: 2019 Empty weight: 2,080 kg Payload: 28,400 kg Gross vehicle weight (GVW): 30,480 kg Dimensions (L x W x H): 606 x 244 x 259 cm Technical condition: very good Visual condition: very good Please contact Arne Honingh for further information. Ksdpfxozfq Nds Anwedn

Condition: used, axle configuration: 3 axles, first registration: 08/2011, color: other, Year of construction: 2011, Empty weight: 5.490 kg Axle 1: left 6 mm right 6 mm Kodpoy S T Ifsfx Anwjdn Axle 2: left 8 mm right 8 mm Axle 3: left 12 mm right 12mm We have the possibility to stack trailers! 

Condition: used, axle configuration: 3 axles, first registration: 09/2008, color: other, Year of construction: 2008, Empty weight: 8.800 kg Axle 1: left 6 mm right 6 mm Axle 2: left 5 mm right 5mm Kedpfx Ansy Urlbjwjdn Axle 3: left 8 mm right 8 mm

Year of construction: 2010, condition: used, Year of manufacture: Mar 2010 New: No Kdjdpev Sra Iofx Anwsn

Year of construction: 1945, condition: used, New: No Serial number: 15 HP LISTER DIESEL TAKEN OUT AN OLD ALUMINIUM SLOOP EXACT AGE UNKNOWN. Kedowz H Uqepfx Anwsdn

Condition: used, first registration: 10/1992, color: other, Year of construction: 1992, OLD QUALITY HEAVY DUTY WOOD TRAILER , EXTENDIBLE , WITH JONSERED 2190 CRANE. Kodpsy Emnxefx Anwjdn

Condition: used, axle configuration: 3 axles, first registration: 07/2016, color: other, Year of construction: 2016, Empty weight: 10.716 kg Axle 1: left 4 mm right 5 mm Kjdpfx Ajwu Sxbonwedn Axle 2: left 5 mm right 14 mm Axle 3: left 9 mm right 3 mm

Condition: used, axle configuration: 3 axles, first registration: 06/2006, color: other, Year of construction: 2006, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm Kedpfx Ajza T Eronwodn We have the possibility to stack trailers!

Condition: used, first registration: 11/2010, color: other, Year of construction: 2010, GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER. Kdsdpoxvx Ipofx Anwen

Condition: used, FIDIA SLU 2 Platine Kdodpfx Anozdvfuowsn

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,723 h, load capacity: 2,000 kg, lifting height: 4,765 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, fork carriage width: 980 mm, fork length: 1,100 mm, empty load weight: 3,416 kg, drive type: Treibgas, LPG Forklift Load centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tyre type: Non-marking Front tyre size: 200/50-10 Rear tyre type: Non-marking Rear tyre size: 18x7-8 Kodpozdl Dmsfx Anwjdn Description: In addition to this machine, we offer further forklifts and warehouse equipment. All our units are workshop-inspected and certified according to FEM 4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we will also buy your used equipment, even if you do not purchase a machine from us. Lease-purchase and financing options available upon request at attractive rates. We are happy to offer expert and detailed advice on our vehicles. Specifications: Side shifter, 3rd hydraulic valve, rear work light, front work light, heater, load guard, full cabin, full free lift, safety light, non-marking tires, interior mirror, joystick, beacon, windscreen wiper, single pedal, LED, seat.

Condition: used, mileage: 673,000 km, power: 228 kW (309.99 HP), first registration: 02/2009, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 10,650 mm, total width: 2,540 mm, Year of construction: 2009, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, = Additional Options and Accessories = - Aluminum fuel tank - Digital tachograph - Lift axle - Air suspension - PTO (Power Take-Off) - Radio/CD player - Reversing camera - Sun visor = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 9,186 cc Kdjdpfxezdt Due Anwen Axle Configuration Front axle: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/80 R 22.5; Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 385/65 R 22.5; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Air suspension Weights Unladen weight: 12,300 kg Payload: 15,700 kg GVW (Gross Vehicle Weight): 28,000 kg Functional Crane: HMF 1420, behind the cab Height of loading platform: 125 cm Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 05/2007, total length: 13,860 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,110 mm, Year of construction: 2007, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Disc brakes = Further Information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 2: Tire tread depth left: 25%; Tire tread depth right: 25% Rear axle 3: Tire tread depth left: 25%; Tire tread depth right: 25% Ksdpfjzdt Awox Anwedn Weights Unladen weight: 7,270 kg Payload: 33,730 kg GVW: 41,000 kg Functional Loading platform height: 120 cm Condition Damage: None Identification License plate: OJ-52-SL

Condition: good (used), mileage: 54,932 km, power: 434 kW (590.08 HP), first registration: 06/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 4,350 mm, fuel: diesel, brakes: retarder, color: brown, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2023, Equipment: AdBlue, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, onboard computer, parking heater, retarder, soot filter, = Additional Options and Accessories = - Aluminum fuel tank - Cab - Air suspension - Particle filter - Side skirts - Sun visor - Auxiliary heater - Power take-off (PTO) = Notes = Scania 590S 6x4 - HIAB Multilift 24T - Like new - Retarder - Full air - Leather Year: 6-2023 Mileage: 54,932 km YS2S6X40005699135 Like new - Low mileage Multilift Ultima 24 - ULT24ZL56 - Year 2023 Sliding rear bumper Retarder Full air suspension Leather interior Alloy wheels Navigation system Ksdpfxszfvqaj Anwjdn + Box with Palfinger PK 9501 Crane = Further Information = Technical Information Number of cylinders: 8 Transmission Gearbox: Opti Cruise, Automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Steerable; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/80R22.5; Dual tires; Max. axle load: 9500 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Max. axle load: 9500 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 13,480 kg Payload: 14,520 kg GVW: 28,000 kg Functional Body brand: Multilift Condition Technical condition: good Optical condition: good

Condition: new, Ball screw drive Dm63x20 Stroke 1000mm Kdjdpfxszd Rdfs Anwjn Steinmeyer Quantity: 2 pieces Unused item from warehouse clearance.

Condition: new, Siemens AC servomotor 1FT6105-8AC71-3EG1-Z Manufacturer: Siemens Motor type: AC servomotor Series: 1FT6 Type: 1FT6105-8AC71-3EG1-Z Designation: Z=N05 Rated torque M0: 50 Nm Rated torque MN: 38.0 Nm Rated speed nN: 2000 /min Maximum speed nmax: 5600 /min Current I0: 21.4 A Current IN: 17.6 A Rated voltage UN: 298 V Protection class: IP65 Kdjdpfx Aszd N Iionwen Insulation class: 155 (F) Encoder: A-2048 Standard: EN 60034 Condition: new / unused

Condition: new, Siemens AC servomotor 1FT6105-8AF71-1AG1, 3000 RPM, 50 Nm Manufacturer: Siemens Motor type: AC servomotor Series: 1FT6 Type: 1FT6105-8AF71-1AG1 Ksdpfx Anjzd N Hrewsdn Rated speed: 3000 RPM Rated torque: 50 Nm Protection class: IP65 Insulation class: 155 (F) Encoder: C20.48S/R B25 Weight: 39 kg Condition: new / unused Partially unpacked for photography - unused item from stock clearance.

Condition: new, Screw gear RTP 502-000-8 GROB 40:23 240/01 00000 Screw gear GROB RTP 502-000-8 Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Design: Screw gear Drawing number: 90010016737 Packaging: Wooden crate Condition: unused, packaged Kodpfx Aezd Ny Sjnwjdn

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system Kdsdpfxozatlro Anwon outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield)