Used Schwarze-Robitec Sr 80 Db for sale (19,221)

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Bledpfozh D S Rex Aqtji Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 1997, Used Hedelius machining center Type BC 80 X-axis: 2500 mm Y-axis: 800 mm Z-axis: 550 mm SK 50 spindle Heidenhain CNC control with Siemens motors/servos Includes tool/clamping system on the table Year of manufacture: 1999 Excluding chip conveyor Blodpfx Aozhat Djqtei

Condition: used, Year of construction: 1999, Overview This SASIB SIMONAZZI (today SIDEL) EUROSTAR 80/20 is an isobaric rotary filling and crown-capping monoblock for glass bottles, equipped with 80 filling valves (pitch 110 mm) and a 20-head Arol crown capper. The machine currently fills cider and carbonated soft drinks at up to 8 g/l CO2 in glass formats from 25 cl to 1.5 L. It is still installed and under power, remains in production until end of October 2026 (week 43), and can be visited in operation on request. Technical data - Manufacturer: SASIB SIMONAZZI (today SIDEL) - Model: EUROSTAR 80/20 - Year of manufacture: 1999 - Machine type: isobaric filler capper (monoblock) for glass bottles - Filling valves: 80 (pitch 110 mm) - Capping: 20 Arol crown heads, crown 26 and crown 29 (2 cap distributor bowls) - Products: cider, carbonated beverages (up to 8 g CO2) - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 22,000 bph (25-50 cl), approx. 16,000 bph (75 cl), approx. 12,000 bph (1.0-1.5 L) - Dimensions: approx. 560 x 430 x H 305 cm - Weight: approx. 13,700 kg - Power supply: 27.11 kW installed - Air supply: 8-12 bar, approx. 795 Nl/min Equipment - Format change parts for the listed formats (star wheels, guides, conveyor curves) - Spare parts package - OEM technical documentation and machine layout drawing Not included: cap feeding system, CIP, product mixer. Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW). Bljdpfxjzic Efj Aqtei

Condition: ready for operation (used), KNOLL KTS 40-80-T5-KB screw spindle pump, serial number: 267592, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bodpfx Aqezh Sckotjli

Condition: new, Pompes EVA VM 80 SCM pump, serial number: 118369, with Siemens 1AV3112B 1LE10031BB234FB4-Z motor, unused, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request separate quotes for packaging and shipping costs! Bsdpszh Sdhjfx Aqtjli

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  - 4500 rpm - with self cleaning drum Accessories  - Spare Parts - Tools Bjdpfx Aqsv N Hcxetsli

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set Blodpfxjzhlais Aqtsi -Mounted reamers: Machine reamers, 2 pieces -Type: Ø 79.5 mm Mounting 29/33 mm -Type: Ø 80 mm Mounting 37/40 mm -Submission/Price: complete -Transport dimensions: 160/80/H90 mm -Total weight: 3.8 kg

Condition: good (used), Year of construction: 1996, Fuel gauge, oil pump, oil dispenser, oil station, fuel pump, tank data acquisition, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Flow rate: 1 to 10 l/min -Motor: Hanning 0.55 kW -Pressure vessel: Volume 2.8 liters -Individual components: see photos -Quantity: 1x oil cabinet available -Price: per piece Blodpfx Aqow A Nddetei -Dimensions: 500/480/H250 mm -Weight: 19 kg/pc.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-wire, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Bsdpfx Aqezh Iigotsli Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, sale is subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Rietschle, rotary vane vacuum pump type KTA 80/1 (08) TN -Suction capacity: 80 m³/h -Pressure: 0.71 / -0.6 bar -Drive: CSM 4 kW / 1420 rpm -Dimensions: 840/420/H310 mm Bljdpfezhkfwex Aqtsi -Weight: 101 kg

Condition: used, Year of construction: 1994, We offer this used KETTNER RBS 90-80 M pallet destacker, manufactured in 1994. Two machines are available. Adjustable for different pallet sizes; the first destacker is set by default for 100x120 pallets, and the second for 80x120 pallets. Manufacturer: KETTNER Model: RBS 90-80 M Bsdpfx Aqszgv Egetjli Order number: 944707/02 Year of manufacture: 1994 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, axle configuration: 2 axles, first registration: 02/2006, loading space length: 6,780 mm, loading space width: 950 mm, loading space height: 300 mm, total width: 2,550 mm, suspension: air, tire size: 215/75R17.5, color: other, Year of construction: 2006, LECINENA SR-2E BOAT TRAILER Loading platform 6.78 + 4.27 m, extendable 6 boat support legs = Further information = Tire size: 215/75R17.5 Suspension: Air suspension Front axle: Dual tires; tire tread depth left inner: 50%; tire tread depth left outer: 50%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Rear axle: Dual tires; tire tread depth left inner: 50%; tire tread depth left outer: 50%; tire tread depth right inner: 50%; tire tread depth right outer: 50% Unladen weight: 5,560 kg Payload: 11,440 kg Bedpszibxqjfx Aqteli GVW: 17,000 kg APK (Technical Inspection): valid until 03/2027 Model number: LECINENA SR-2E / BOAT TRAILER / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide correct information, but no rights can be derived from the information provided.

Condition: used, continuous teflon belt grill suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm Blodpfx Aqozdn Izotsi total width 1.500 mm weight : 5.700 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Bsdpfx Aqoy R Nnfstsli Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm Bjdpezg Urrsfx Aqteli -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1345/600/H90 mm -Weight: 81 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 49,673 h, functionality: limited functionality, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 154 cm³, KRAUSS MAFFEI KM 80-380 EX Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control unit: MC5 Year of manufacture: 2008 Operating hours: 49,673 h Technical Data - Clamping Unit Clamping force: 800 kN Tie bar spacing (H x V): 520 x 420 mm Platen size (H x V): 640 x 740 mm Minimum mold height: 300 mm Maximum platen distance: 790 mm Ejector stroke: 100 mm Ejector force: 22 kN Centering diameter moving platen: 125 mm Centering diameter fixed platen: 125 mm Technical Data - Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 2,429 bar Screw L/D ratio: 23 l/d Screw speed: 477 min⁻¹ Specific injection rate: 289 g/s (GPPS) Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 5.35 m x 1.7 m x 2 m Total weight: 6,500 kg Equipment Display language: German CEE outlet 16A 1x air valve Bedpfx Aqszgt Eqjtsli Machine with material hopper Machine with water battery Levelling elements EUROMAP 67 handling interface USB interface Schuko socket 10A 24x tool heating circuits

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Blsdpfxozf Ibkj Aqtoi Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), Schlebach PMC 30/80 RS Immediately available, no delivery time. Standard machine for the production of 25 mm double standing seam profiles from cut sheets or sheet material. The machine is equipped with: ✅ Profiling rollers for 25 mm seam height ✅ Rollers including transport handles for easy transport Bljdpjzivgisfx Aqtsi ✅ Clip relief (extra rib for adhesion) ✅ An RS slitting shear for cross-cutting before profiling ✅ Bending capacity: 0.8 mm (zinc, aluminum & copper), 0.7 mm steel sheet Condition: • Very good technical condition • Very good optical condition • Weight: approx. 560 kg An inspection and test run are possible by arrangement.

Condition: ready for operation (used), Year of construction: 2017, clamping force: 800 kN, Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details. • Tie bar distance (H × V): 420 × 420 mm • Platen size (H × V): 595 × 595 mm • Mould height (min–max): 180–515 mm • Max opening stroke: 515 mm Blsdpfxjyn E E Ts Aqtji • Max daylight: 515 mm + mould height (depending on configuration) • Injection unit options: • Screw diameters: 18 / 25 / 30 / 35 mm • Shot volume: 22–116 cm³ (depending on screw) • Max injection pressure: up to 3000 bar (depending on screw diameter) • Max injection speed: 300 mm/s • Machine category: Fully electric (no hydraulics for main movements)

Condition: refurbished (used), Manufacturer: Steinert Type: UMS 45 70 80/61 3,1 kW / 51 A. / 61 V. 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Blsdpfxowvaide Aqtei Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Blsdpfx Ajyzt Dljqtji Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2014, working width 1600 mm working area: 12800 m²/Std. container volume 315 l battery 48 / 375 V / Ah Number of working hours abgelesen 742 h Bedpfxszip Ias Aqtjli weight of the machine ca. 1,5 t dimensions of the machine ca. 2,2 x 1,4 x 1,5 m Ride-on sweeper - incl. charger - Debris hopper 315 liters

Condition: good (used), Year of construction: 2012, CNC long-turn lathe Manufacturer: STAR Type: SR-20R IV type B Year of manufacture: 2012 Equipped with: FANUC 31i-B5 control Synchronous spindle Powered tools C-axis Programmable B-axis Y2-axis Bjdpfszilk Rsx Aqtjli High-pressure pump Back-end machining Fire extinguishing system Bar feeder magazine FMB TURBO 2-20

Condition: used, Used machine Condition: age-appropriate for efficient dowel hole drilling of longitudinal and transverse pilaster strips for frame doors, door panels drawer parts crossbars of all kinds 3 spindle motor bung spacing 25/25 mm stroke max 80 mm Bsdpfxsw Nabxe Aqtjli Motor 1,5 HP Support table 260 x 130 mm Height adjustment from 5-40 mm according to scale with reversible folding fence Foot valve control NRW

Condition: used, Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Bedpfx Aszibtboqtoli Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request