Used Router - Pcb Separator for sale (6,637)

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Itsdsv Ta D Djpfx Altek Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems.

Year of construction: 2019, condition: new, machine/vehicle number: 1C331151, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10 Nominal compressor capacity (based on 1 bar absolute and 20 °C, depending on compressor design and lubricant): 120 m³/h Iedpfxedbwf Sj Altotk Connection: G 1/2" Volume of the container: 25 liters Volume of the pre-adsorber: 0.9 liters Volume of the effective activated carbon adsorber: 3.2 liters

Year of construction: 1995, condition: ready for operation (used), 4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2100mm/1450mm/1800mm. 3) One CNC vertical PCB drilling and routing machine, Lenz GX 600-1, year of manufacture: 1991, travel X/Y: approx. 650mm/600mm, number of spindles: 1, rapid traverse X/Y: approx. 15m/min, spindle: Precise SC63, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2000mm/1500mm/1800mm. 4) One compact CNC vertical PCB drilling and routing machine, Lenz TB 500-1, travel X/Y: approx. 475mm/390mm, number of spindles: 1, rapid traverse X/Y: approx. 10m/min, spindle speed: approx. 15000rpm, tool holder: 3mm, control: SIEB & MEYER CNC 35.00. Equipped with a cooling unit and a spare control unit, overall dimensions X/Y/Z: approx. 1500mm/1100mm/1520mm. The machines can be purchased individually or as a package. Inspection possible by appointment. Iodpfxsznmy Do Altjtk

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng KYDB204 disc stack centrifuge / 3-phase separator. Manufacturer: Juneng Machinery Model: KYDB204 Type: disc stack centrifuge / centrifugal separator Separation: liquid-liquid-solid / 3-phase separation Drum diameter :242(mm) Rotary speed: 8086(r/min) Motor model and power: Y112M-4-B5 4KW Capacity: 0.5-2m3/h(depend on material condition ) Power: 4(KW) Dimension（L*W*H） 830*610*1150(mm) Weight: 580(kg) Degree of automation :Automatic cleaning and slag discharging Dimension: 810*968*1139mm(L*W*H) Material: stainless steel, according to manufacturer specification Condition: new / unused Application: oil-water-solid separation, liquid clarification, fine separation Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Europe can be arranged The Juneng KYDB204 is a compact industrial disc stack separator designed for continuous liquid-liquid-solid separation. It is suitable for applications where oil, water and fine solid particles need to be separated in a closed centrifugal system. Typical applications: edible oil clarification vegetable oil / crude oil polishing oil-water separation fuel / lubricant treatment fine chemical liquid separation food and beverage liquid clarification industrial process liquid separation Main advantages: compact disc stack centrifuge design continuous operation closed inlet and outlet system high-speed centrifugal separation fine separation of liquid phases and solids Itjdpfx Alszlby Hotok stainless steel execution according to manufacturer specification suitable for integration into existing process lines The machine is offered as new equipment through an EU seller. Delivery, documentation and final technical confirmation can be arranged before order. Technical details to be confirmed according to final product application. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng KYDB204 Tellerzentrifuge / 3-Phasen-Separator. Neue Juneng KYDB204 Disc-Stack-Zentrifuge zur kontinuierlichen Flüssig-Flüssig-Feststoff-Trennung. Geeignet für Öl-Wasser-Feststoff-Trennung, Pflanzenölklärung, Prozessflüssigkeiten, Lebensmittel-, Chemie- und Industrieanwendungen. Kapazität: ca. 2.000 l/h, abhängig vom Produkt und Prozess Motorleistung: ca. 4 kW Ausführung: Edelstahl gemäß Herstellerspezifikation Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung nach Europa kann organisiert werden Technische Details und Eignung bitte je nach Anwendung final bestätigen.

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: workshop-inspected Column extension: 750 mm Spindle stroke: 100 mm Max. clearance between table and spindle: 310 mm Spindle speed: 10,000/20,000 rpm Motor power: 2.2/3.3 kW Tool clamping: collet chuck With air blast device via compressed air connection External dimensions: 905 x 1380 x 1600 mm Itsdew I U Udjpfx Altek Weight: 533 kg Availability: by arrangement Location: Hochheim

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, WOLFF - Sand separation and washing plant Itodsy N Rtyjpfx Altek

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Permanent magnetic conveyor belt separator, including frame, Itsdpfx Alszma Ewstsk belt speed: approx. 1.7 m/s, drive power: 4 kW (complete geared motor, brand new), overall length: approx. 2650 mm, width: 1500 mm, height: 700 mm, belt width: 1000 mm, ideal installation distance: 200-250 mm (max. 300 mm), weight without frame: approx. 3000 kg.

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 178000012, Machine in new condition, barely used. Itjdpfx Aezk Ndqeltek

Condition: used, Year of construction: 2020, HTST ARSOPI 500 Litres Pasteuriser built in 2020 by Dairy Machinery UK and Arsopi, This machine is self heated by heating element of 9kw , It is mounted on a stainless steel frame and comes with a control panel, balance tank, auto valves, product and water pump, 1" inlet and outlet pipes which also act as a CIP loop. The complete process is run automatecly with a divert valve to ensure pasteurisation temperatures and milk flow . The machine has hardly had any use and is in perfect condition. We can support this Pasteuriser in full starting from the controls all down to the gaskets of the PHE . Machines that Can Be added with on extra sale are the below : 1) SEPARATOR Specifications Manufacturer :Seital/SPX Model :SE05 Condition : Used Stock Number:834 Manufacture:Seital Capacity : 1200 L/h Cleaning : Manual Cleaning Tools : Included Manual Book : Included Base Frame : Included 2) HOMOGENISER Specifications Manufacturer : GEA Model: NS20002H Year : 2009 Condition : Used Serial Number : 7818 Stock Number 110613074 Capacity : 30 L/H on 600 Bar Capacity : 500 L/H on 200 Bar Working Pressure: 200 to 600 bar Max No. Stages: 2 condition : Very Good condition Available: Immediately SOLD AS A COMPLETE PACKAGE OR SEPARATE Volume capabilities (litres): 500 Balance Tank: Included PHE Temperatures: 4-45-55-65-72-4 Outlets: Separator and Homogeniser Outlets Divert Valve: Included Dimensions in cm : 160 x 80 x 200 Product Pump: Included Hot Water Pump: Included Comtrols: HMI Touch Screen CIP: Program included for self Clean in Place Specifications Manufacturer: Seital/SPX Model: SE05 Condition: Used Stock Number: 834 Manufacture: Seital Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included Manufacturer: GEA Model Homogeniser: NS20002H Year: 2009 Serial Number: 7818 No. Stages: 2 Condition Homogensier: Very Good condition Itjdpfxsy Ry Hro Altsk Available: Immediately

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please provide your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area Itsdpjftb Ebefx Altjk - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hoods, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry. Below, you can select the cyclone with the appropriate size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Condition: new, Siemens 6GK5873-0AA10-1AA2 router, serial number as shown in photo, unused in sealed original packaging, 100% functional Itjdpfsxagufox Altjk

Condition: ready for operation (used), Okuma DC power supply for 6 axes, PCB with part number E4809-436-002-A, used, shows normal signs of wear, 100% functional. Ijdpfxoi Ecako Altstk

Condition: excellent (used), In almost new condition 3mm drum for a Baader 604 separator Isdpfxoxd Swto Altstk

Condition: excellent (used), Year of construction: 2017, Baader 600 Separator Itsdjxg Tdgepfx Altok Вaader 600 provides soft separation of raw meat material from a waste components – bones, skin etc. A flexible squeezing belt transports the product to a perforated drum. It gently squeezes the softer particles like meat and fat through the holes, then the harder particles such as bones, sinews and cartilage stays outside of the drum. Capacity: up to 400 kg per hour The throughput can vary in dependence of the drum hole size, product and its pre-treatment, the selected pressure etc. Baader 600 is а user-friendly machine. Its cleaning is easy and quick. The machine is built in accordance to worldwide recognised sanitary standards. A pressure system ensuring gentle product processing and reduced machine wear. Machine has castors for easy handling. Brand: Baader Model: 600 Year: 2017 Capacity: Up to 400 kg./hour Drum: 3 mm Power: 400V / 50Hz / 1,5kW Machine dimensions (LxWxH): 1.000x800x1.200 mm Machine weight: 230 kg.

Condition: good (used), Baader 601 Separator Вaader 601 provides soft separation of raw meat material from a waste components – bones, skin etc. A flexible squeezing belt transports the product to a perforated drum. It gently squeezes the softer particles like meat and fat through the holes, then the harder particles such as bones, sinews and cartilage stays outside of the drum. Capacity: up to 800 kg per hour Isdpfx Alszgtanstetk The throughput can vary in dependence of the drum hole size, product and its pre-treatment, the selected pressure etc. Baader 601 is а user-friendly machine. Its cleaning is easy and quick. The machine is built in accordance to worldwide recognised sanitary standards. A pressure system ensuring gentle product processing and reduced machine wear. Machine has castors for easy handling. Manufacturer: Baader Model: 601 Capacity: Up to 800 kg./hour Drum: 3 mm and 5 mm Power: 400V / 50Hz / 3kW Machine dimensions (LxWxH): 950x950x1.800 mm Machine weight: 500 kg.

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Year 2007 Missing sensors Ijdju Icgbepfx Altetk Available catalog

Condition: used, Year of construction: 1995, Beer clarification plant with a self-discharging separator. The separated spent grain is temporarily stored in a 55 hl conical stainless-steel tank. Additional title: Disc centrifuge for the preliminary clarification of beer Capacity: 20000 l/h Volume sludge tank: 5500 l Material: stainless steel Position: standing on feet Features: Separator; sludge tank; pump; flow measurement; turbidity measurement; control cabinet with touch-screen display; special tools; various pipes, pipe panel and valves Ijdpfezizh Ssx Altetk

Condition: refurbished (used), “SGM DIS 100” for Sale Manufacturer: SGM Magnetics Type: DIS 100 Belt widthness: 1.000 mm (New belt) Included: – New Control-unit Iodjy U N Exopfx Altjtk Eddy Current Separator is overhauled, sandblasted and painted.

Year of construction: 2012, condition: used, Technical data: Table support surface: Width x depth x max. clamping distance: 192 x 115 x 120 mm Height of cutting disc center above table: 520 mm Cutting disc height adjustment via Cylinder with measuring system: 445 mm Cutting disc dimensions: Min.: 350 x 2.8 x 32 mm Max.: 400 x 4.0 x 32 mm Workpiece dimensions max. length: Workpiece feed: 3500 mm Workpiece discharge: 2000 mm Workpiece dimensions min. length: Workpiece feed: 300 mm Workpiece discharge: 300 mm Workpiece feed: servo-controlled Measuring distance via measuring system: 3500 mm Circumferential speed: 25 - 60 m/sec Main motor: 10 kW Dimensions Separation system (WxDxH), approx.: 850 x 1600 x 2815 mm Weight: Machine: 980 kg Workpiece feed: 380 kg Itedpfsvu U Hpjx Altek Workpiece discharge: 350 kg Control cabinet: 280 kg

Condition: used, AZO FLF650 liquid separator centrifugal sieve for liquids Motor power 1.5kW 853rpm Excl. sieve basket Itsdpfx Alewyfxxstjk Adjustable in slope See our other advertisements VMA Wekerom

Condition: good (used), 6 Pcs “Smulders” for Sale Manufacturer: Smulders Waste Technology – 5 Pcs. with 200mm. wide Stainless steel belt. – 1 Pc. with 400mm. wide Stainless steel belt. Also air blowers in stock. Iedjy Um N Uopfx Altstk

Condition: as good as new (ex-display), single phase, 1950 kg, dust extraction, vacuum table with four individually controlled sections, water cooled 6kw 24000 rpm spindle, A2 hand held controller.spindle, Itedpfshh Anrsx Altjk

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Single-sided protective cap Iodpfoyk E T Nsx Altotk Weight per piece: approx. 2.19 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Condition: used, The SEITAL SPX SE05X cream separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key features and information that are commonly associated with cream separators like this model: - Separation Process: Cream separators work on the principle of centrifugal force to separate cream from milk based on their different densities. - Capacity: The SE05X typically features a specific capacity for processing milk per hour, which is essential for both small-scale dairy farms and larger dairy operations. - Material: Most cream separators are made of high-quality stainless steel to ensure hygiene, durability, and easy cleaning. - Efficiency: The design usually maximizes the separation efficiency, allowing for the extraction of cream with a high fat content while minimizing the fat content in the skimmed milk. - Ease of Use: These machines are designed for ease of operation, requiring minimal manual interaction once set up. - Applications: Beyond separating cream from milk, they can also be used for other applications in the dairy industry, including buttermilk separation and processing of other liquids. - Maintenance: Regular cleaning and maintenance are essential to ensure optimal performance and longevity of the machine. Manufacture: Seital Model: SE05X Capacity: 1200 L/h Itodpfx Ajxzxuaoltsk Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 001-2009, MAPSFERA 1 09 METAL SORTING LINE, consisting of a vibrating feeder, conveyor belt, head magnetic pulley, and eddy current separator, designed for efficient automatic separation and recovery of ferrous and non-ferrous metals in industrial recycling applications. • Manufacturer: MAPSFERA • Model: 1 09 • Configuration: vibrating feeder + conveyor belt + magnetic pulley + eddy current separator Itsdpfezbtrzsx Altjk • Application: separation of ferrous and non-ferrous metals from mixed waste streams • Status: available for inspection • Current condition: dismantled / stored The system is designed for continuous industrial operation in material recovery and recycling plants, enabling highly efficient metal sorting from mixed input streams. The vibrating feeder ensures a controlled and uniform material flow, while the conveyor system transports the material through the various separation stages. The head magnetic pulley removes ferrous metals, and the eddy current separator allows for the effective separation of non-ferrous metals such as aluminum and copper, improving overall recovery rates and material purity.