Used Prozap Assembling Station for sale (8,662)

Condition: used, Year of construction: 2013, machine/vehicle number: 2108, functionality: fully functional, operating hours: 10,000 h, power: 11 kW (14.96 HP), input voltage: 230 V, input current: 39 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 46 m², noise level: 65 dB, actuation type: electric, total height: 4,000 mm, total length: 2,900 mm, total width: 850 mm, overall weight: 600 kg, year of last overhaul: 2026, Equipment: documentation/manual, VACUUM SYSTEM IN PERFECT WORKING ORDER (lightly used, auxiliary system). SUPPLIED WITH 3 LARGE-DIAMETER PRIMARY HOSES AND 2 BOXES OF PLASTIC BAGS SIZED FOR THE CONTAINERS. OPTIONAL: ADDITIONAL LINERS CAN BE PURCHASED. Dksdpjzvquhefx Aa Het

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Dedjv Sthgopfx Aa Hokt Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling. This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long runtimes between refills. The built-in 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited. Best for: heating and drying halls, workshops, greenhouses, storage rooms, and construction sites requiring long runtimes without refueling. Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, with exhaust vented through the Ø150 mm chimney. What the specifications mean in practice: • 80 kW heating output – heats large halls and open working areas, not just a corner. • 1000L external + 69L internal tank – long runtime with fewer refills. • 2,000 m³/h airflow – distributes warm air across a wide area. • Thermostat + digital display + 10m external room thermostat – automatic operation. • Indirect firing, Ø150mm chimney – combustion gases are vented outside, keeping the air clean for drying. • Large-wheel chassis – can be repositioned by a single person. Dkodezrwapepfx Aa Hot Complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses. Technical data: – Model: APEX BGO-80B (Type 56217) – Heating output: 80 kW / 68,800 kcal/h – Fuel: Diesel/heating oil – Consumption: 7.5 l/h – Mains voltage: 230V~50Hz – Fan motor: 900W – Blower output: 2,000 m³/h – Blower outlet: 340mm – Chimney: Ø150mm – Internal tank: 69 l – Dimensions: 1330x568x1028mm – Weight: 59 kg – Manufactured: 01/2026 – Protection: IPX4 Condition: Well-maintained, ~200 operating hours, fully functional. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, test run possible before pickup. Nameplate photos and a running video are available; in-person inspection in Kerns OW by appointment. You may verify the identity, condition, and operation before paying – we guarantee the machine is as described, complete, and functional at the time of inspection. Why buy now: a single used unit, not stock. Once sold, this configuration (heater + tank + certified basin, sold together) is gone. First-buyer bonus: free functional test run before pickup, tank connected and thermostat set to your target temperature, at no extra cost. Valid until Sept 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 956, Equipment: CE marking, BRAND NEW ON PALLET - NEVER ASSEMBLED Hänel Rotomatic 956 Lean Lift Year of manufacture 2022 Device dimensions: H 7800mm approx. Dkodpfxow Swnno Aa Hjt W 3420 mm D 1670 mm 35 No. Shelves up to 200kg per Shelf Total load: 15995kg

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Technical data: Dedpfxszxu A Uj Aa Hjkt working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Condition: as good as new (ex-display), Year of construction: 2018, functionality: unexamined, total width: 40,000 mm, total length: 9,000 mm, total height: 7,000 mm, type of input current: three-phase, IBC unloading and cip station EX Dedpfx Aajra Dlpj Hekt with fume ventilation 5 ibc conatiners with driptray 2 product pumps completely 316 stainless never used welding documentation registration available simatic panel

Year of construction: 2003, condition: used, functionality: fully functional, empty load weight: 3,000 kg, total length: 12,500 mm, total width: 5,600 mm, machine/vehicle number: 0-280-15-2017, We offer a used, automatic, two-chamber loading station from the renowned BARGSTEDT brand, model RTBH22/D/30/12. This unit is ideal for modern woodworking facilities where efficiency and process automation are crucial. Thanks to its two chambers, it ensures continuous operation and significantly improves material handling, minimizing downtime. The robust construction and the reliability of the BARGSTEDT brand guarantee long-lasting, trouble-free operation. Automatic loading from two chambers. Capacity: 8 cycles/minute. Loading with vacuum suction cups. Dkedpfozgcd Asx Aa Het Maximum panel size: 1300*2500. Option to purchase the entire line, including a roller conveyor equipped with a conical swivel and a double-sided edge banding machine, IMA COMBIMA I K/II/R75/760/V/R3.

Condition: new, Year of construction: 2026, CORMAK PS-360 Welding Positioner Dodporigl Uofx Aa Hskt The CORMAK PS-360 welding positioner is a high-quality rotary positioner designed for professional industrial applications. Developed with ergonomics, efficiency, and precision in mind, it is an essential support tool for welding and assembly of cylindrical components, pipes, and parts with complex geometries. It enables efficient manipulation of workpieces, allowing welding in the optimal position, which significantly improves weld quality and operator working conditions. Main advantages of the machine Professional welding positioner with adjustable rotation speed and tilting function of the working table. High load capacity: up to 100 kg in horizontal position and 50 kg in vertical position. Smooth rotation speed adjustment: from 0.2 to 5 rpm, suitable for precise TIG and MIG/MAG welding processes. Compact design: ideal for workshops, production lines, and automated welding stations. Ground connection slot: ensures a continuous electrical connection without the need to change the ground connection after each rotation. Design and technology The PS-360 welding positioner has been designed for intensive industrial operation. The robust steel frame ensures excellent stability and rigidity, while the manual tilting mechanism allows the working table to be positioned at an angle of up to 90°. A 120 W motor provides sufficient torque for handling heavy cylindrical and tubular components. The control system consists of a control panel and foot pedal, allowing the operator to maintain full control over the welding process. Precision and work efficiency Using the CORMAK PS-360 positioner significantly improves weld accuracy and repeatability. Welding in a fixed, ergonomic position reduces the risk of operator errors and eliminates the need for frequent repositioning of components. Smooth speed adjustment allows the rotation speed to be matched to the specific application, making the PS-360 an excellent solution for both precise TIG welding and more dynamic MIG/MAG welding processes. Applications The PS-360 welding positioner is used in a wide range of industrial production and assembly processes: Welding of pipes, flanges, shafts, and cylindrical components Production and repair facilities – welding and assembly lines Welding, painting, and mechanical industries Robotic and automated welding stations Standard equipment CORMAK PS-360 welding positioner Foot control pedal Power cable Welding torch holder mast User manual Optional equipment Self-centering three-jaw chuck WP200 Self-centering three-jaw chuck WP300 Technical specifications Parameter Value Horizontal load capacity 100 kg Vertical load capacity 50 kg Working table diameter Ø360 mm Tilting angle 0° ~ +90° Rotation speed 0.2 ~ 5 rpm Motor power 120 W Tilting adjustment Manual Voltage 220 V – 1PH – 50 Hz Dimensions 530 × 550 × 500 mm Weight 49 kg Note: The three-jaw chuck is not included in the standard package.

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Dkodpezxn S Asfx Aa Hot Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Rotor line Loop1 & Loop 2, location: Trnava, Slovakia. We will gladly provide further technical documentation or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible, subject to payment of costs. Subject to prior sale, errors and omissions excepted. Dsdpfxozy E I Ds Aa Hekt

Year of construction: 2014, condition: good (used), We are selling our Asys Insignum 1000 Scan. Asys Insignum 1000 Scan Serial No. 052939 Dkedpfxozxgx Io Aa Het Year of manufacture: 2014 Shipping is possible.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately. Dodpfx Aaszu R S Dj Hekt

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm Dkodpfx Aezzrutsa Het 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Year of construction: 2011, condition: good (used), For sale: our Asys LSB 03 (destacker) PCB loader Serial number: 036469 Year of manufacture: 2011 Good condition Shipping possible. Dedpfx Aszxq Exja Hokt Inspection possible.

Condition: ready for operation (used), Year of construction: 1994, spindle speed (max.): 2,244 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 500 mm, overall weight: 2,490 kg, number of slots in tool magazine: 6, number of axes: 2, Horizontal turning machine manufactured in 1994. This KOVOSVIT MAS OPTIMAT A50CA features a robust design with a machine weight of 2490 kg. It includes essential equipment such as a bar feeder guide channel system and a tool turret assembly. If you are looking to get high-quality turning capabilities, consider the KOVOSVIT MAS OPTIMAT A50CA machine we have for sale. Contact us for further details. Dksdpezhwabefx Aa Hjt - Main Voltage: 3 x 380 V- Current: 25 A- Frequency: 50 Hz- Control Voltage: 24 V DC / 110 V AC- Enclosure Protection Rating: IP 54 / IP 20- Technical Standard: ČSN 33 2200- Control: Curve- Spindle diameter: 52 (60) mm- Spindle speed: 68 – 2,244- Number of tools: 4 side-cutting slides- 6 tool stations on the turret- Included Equipment: Bar feeder guide channel system, coolant piping hoses, work area enclosure guarding with viewing window, tool turret assembly Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2015, Various Stainless Steel Conveyors & Packing Stations 1. Low level belt conveyor, Fully Stainless Steel, Belt Dimensions - 1000mm L x 400mm W, Height adjustable feet, Complete with motor. gearbox Stop / Start Isolator, Box alignment side guide 2. Incline Belt Conveyor, Stainless Steel Frame, Belt Dimensions 2500mm L x 400mm W. Infeed height 500mm, Outfeed height 1350mm 3. High Level Box Collation Conveyor, Gravity Roller Conveyor for Box Collation, Dimensions 2500mm L x 400mm W x 1400mm H, Height adjustable legs / feet 4. Packing Station Conveyor, All stainless steel, Two Packing tables - dimensions 760mm L x 400mm W each, Conveyor dimensions - 2000mm L x 400mm W, Height adjustable feet, Adjustable box aligner / guide 5. Driven Roller Conveyor Stainless Steel, Dimensions - 2200mm L x 400mm W rollers, With top box closer adjustable plate, 2200mm L, Fully stainless steel, Complete with motor, gearbox, Stop / Start Isolator. 6. Gravity Roller Flexi Conveyor, Closed Dimensions 960mm L x 300mm W, Fully open 3200mm L, Height adjustable legs Dodetqdq Sspfx Aa Hjkt 7. Stainless steel conveyor with a food grade flat belt, 4000mm L x 350mm wide belt 8. More conveyors - call us for details

Condition: used, Year of construction: 2004, machine/vehicle number: 1130.2623-31, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a CNC lathe manufactured by VDF Boehringer, model: NG 180-2. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Djdpfx Aszy Ukusa Hjkt Type of current: AC Frequency: 50 Hz

Condition: not inspected (used), functionality: unexamined, Connection voltage: 400 V Refrigerant: 95g / R134a Compressed air supply: 5-8 bar Printer: Star DP8340S Dsdpfxszvyl Ne Aa Hjkt Year of manufacture: 08/2002

Condition: used, functionality: fully functional, Year of construction: 2008, No minimum price – guaranteed sale to the highest bidder! Dkjdezy Ullopfx Aa Het The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a laser welding system manufactured by TRUMPF, model: TLC 1000P.

Condition: new, Year of construction: 2026, CORMAK Electric Scissor Lift Table – 2000 kg Capacity The CORMAK Electric Scissor Lift Table with a 2000 kg load capacity is a heavy-duty stationary lifting platform designed for handling substantial loads in warehouses, production facilities, logistics centers, workshops, and industrial environments. The unit enables convenient lifting, lowering, and positioning of goods, pallets, crates, containers, machine components, and structural elements at the required working height. This model is designed for applications where standard lift tables with lower capacities are insufficient. With a maximum lifting capacity of 2000 kg, 400 V power supply, and a 1.5 kW lifting motor, the table is ideal for intensive handling of heavy materials and repetitive industrial operations. The 1300 × 850 mm platform provides stable support for loads, while the lifting range from 230 mm to 1000 mm allows the working height to be adjusted to suit the operator, workstation, machine, production line, or loading area. It is a practical solution for improving workplace ergonomics and reducing manual lifting. Key Advantages of the CORMAK Electric Scissor Lift Table 2000 kg load capacity – suitable for handling heavy loads, pallets, crates, molds, and industrial components. Lifting range: 230–1000 mm – allows convenient adjustment of working height. 1300 × 850 mm platform – stable surface for handling goods and production components. 1.5 kW lifting motor – ensures efficient operation during demanding lifting tasks. 400 V power supply – designed for industrial applications. Remote control operation – easy platform lifting and lowering at the touch of a button. Scissor lift mechanism – provides stable platform guidance under load. Safety limit switches – control the maximum lifting height and enhance operational safety. Safety toe guard – protects the area beneath the platform during lowering. Net weight of 260 kg – contributes to increased stability when handling heavy loads. Manufacturing Facilities Feeding heavy components to machines, assembly lines, and machining stations. Positioning materials at ergonomic working heights. Industrial Warehouses Lifting pallets, containers, crates, bulk goods, and materials for further transport. Improving workflow efficiency and reducing manual handling. Workshops and Technical Service Centers Handling machine parts, molds, tools, assemblies, and steel components. Supporting maintenance and repair operations. Dkjdow Rl Rnspfx Aa Het Logistics Centers Assisting with order picking, sorting, shipment preparation, and load inspection. Facilitating efficient material flow. Loading and Unloading Areas Positioning heavy goods at the required working level for safer handling. Quality Control Departments Raising components to a comfortable inspection height for measurement, testing, or further processing. Production and Technological Lines Positioning materials and components at the optimal operating height for operators and machinery. Technical Specifications Parameter Value Maximum Load Capacity 2000 kg Minimum Height 230 mm Maximum Height 1000 mm Platform Length 1300 mm Platform Width 850 mm Lifting Motor Power 1.5 kW Weight 260 kg Power Supply 400 V UDT Inspection Required Yes

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble • Extendable or shortenable at any time • Ideal for future modifications or system adaptations Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Dksdpsyhznnefx Aa Hjt Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Condition: excellent (used), Year of construction: 2022, joke Technology ENESKA PostPro – Post-processing station for 3D printing Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Machine type: Post-processing station for additively manufactured components For sale is a used joke ENESKA PostPro post-processing station for the professional post-processing of additively manufactured plastic components. The system was specifically designed for the depowdering, deburring, grinding, polishing, and finishing of 3D-printed components and features a closed processing chamber with integrated extraction technology, LED lighting, and convenient tool control. The scope of supply includes a comprehensive original accessory package with various electric and pneumatic processing tools, abrasives, and other accessories as shown in the pictures. Technical data: Manufacturer: joke Technology GmbH Dkedpozrvd Hofx Aa Hst Type: ENESKA PostPro Year of manufacture: 2020 Power supply: 400 V / 50–60 Hz Connected load: 6,500 VA Fuse: 16 A slow-blow Output voltage (U20): 24 V Working chamber volume: approx. 560 l Working chamber: Large stainless steel working chamber Closed processing chamber Large viewing window LED working chamber lighting Integrated compressed air connections Connections for multiple processing tools Equipment: Touchscreen control HEPA H13 filter system Closed processing chamber Manual operations with protective gloves Perforated stainless steel work table Tool connections for electric and pneumatic tools Height-adjustable machine feet Tool package: Electric precision grinder Electric high-speed grinder Pneumatic belt grinder Compressed air blow gun with spiral hose Compressed air hoses Original joke replacement gloves Grinding belts Grinding pins Grinding discs and flap discs Plastic hammer Screwdriver Other accessories as shown in the pictures Dimensions: External dimensions: approx. 1,437 × 1,685 × 1,640 mm Weight: approx. 748 kg Transport data: Weight: approx. 748 kg Easy loading using a forklift or crane. Condition: Used Machine from industrial use. Optical condition as shown in the pictures. Scope of supply: joke ENESKA PostPro Electric and pneumatic processing tools Compressed air accessories Original replacement gloves Grinding and consumable materials Other accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) Dksdpfx Aajh T Dvts Hst KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, LANG Embossing Station 52610 for Macro-Grip® Clamping Technology Offered is a LANG embossing station, type 52610, for preparing raw parts for the proven Macro-Grip® clamping system from LANG Technik. The embossing station enables the embossing of the clamping contour into raw materials, thus ensuring a positive, process-reliable workpiece clamping during 5-axis machining. Equipment: Manufacturer: LANG Technik Type: 52610, older version Embossing station for Macro-Grip® clamping technology Positive pre-embossing of raw parts High process reliability during machining Robust industrial design Simple and fast operation Advantages: Maximum holding forces with low clamping height Dkedpfxozu Imfs Aa Hjt Optimal accessibility for 5-axis machining Reduction of vibrations and workpiece movements Fast and reproducible workpiece preparation Ideal for raw materials in single-part and series production Application areas: CNC machining centers Tool and mold making Job manufacturing Single-part and series production 5-axis machining of raw parts Used, fully functional. Normal signs of wear and tear corresponding to age and use. Scope of delivery: LANG embossing station with clamping jaws Accessories according to photos or upon inspection Inspection and functional test possible by arrangement. Shipping or pickup by agreement.

Year of construction: 2023, condition: used, functionality: limited functionality, We offer new fire pumps station for TYCO fire sprinkler system , complete with el. cabinets, hoses, valves etc.. . Dkedpjy E E Ecsfx Aa Het If you have any questions or need more information, feel free to send us a message or give us a call.