Used Protec 3 Achs Welding Table for sale (82,388)

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: Ppjdpfx Ajy Auhzshljt * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: ready for operation (used), T-slot assembly table, T-slot table, T-slot welding table, Used machine Overall dimensions: Length: 740 mm Width: 550 mm Ppedjv Il Evspfx Ahljt Height: 540 mm Weight: 398 kg T-slot size: 50 x 20 mm Worktable size: Upper part: 660 x 550 mm Side part: 650 x 400 mm Worktable tiltable at 90˚

Condition: used, Year of construction: 1994, machine/vehicle number: 00258 PE 364, Technical data: - Load capacity: 650 kg - Faceplate dimensions: 700 x 700 mm - Faceplate, motorised and steplessly tiltable: 0 - 135° - Motorised rotation, continuously adjustable: 0.07 - 1.5 rpm Ppodpfsy E N T Rox Ahlst - Table height in horizontal position: 890 mm - Electric control button - Space requirement: approx. W 850 x H 890 x D 1200 mm - Weight: approx. 400 kg

Condition: used, Work table with "swallowtail" fixed cuttings Ppodpfjhyxa Aex Ahlet Overall size:1100x1400x800 mm Weight: 1880 kg

Condition: used, Year of construction: 2010, machine/vehicle number: xxxx, Lg.No. 26116 Technical data: - Length 2000 mm - Width 1000 mm - Plate height 200 mm - Wall thickness 25 mm Podpfey E N I Iex Ahlept - Hole diameter (perforations) approx. 28 mm - Center distance of perforations approx. 100 mm - Table height approx. 850 mm - Table height adjustable - 6 pcs. plug-in connecting bolts - 2 pcs. stop (with elongated hole + round hole) 225 x 50 x 20 mm - Total weight approx. 1000 kg

Condition: ready for operation (used), PE-KPE pipe welding machine, butt fusion machine, plastic pipe welder, mirror fusion machine, DYTRON ST 160, Used machine Manufacturer: DYTRON Model: ST 160 Overall dimensions: Length: 1000 mm Width: 530 mm Height: 1160 mm Electrical data: 230 V DYTRON – Welding Bench ST-160 The ST 160 welding bench is designed for socket and mirror welding of thermoplastic pipes. It supports: Podpfx Ahexnqt Uolopt Mirror (butt) welding: 40 – 160 mm diameter Socket welding: 40 – 110 mm diameter To facilitate mirror welding, the set includes: Special mobile workbench Electric pipe planer POLYS P-4a welding unit (1200 W) Clamp inserts in sizes: d40, 50, 63, 75, 90, 110, 125, 140 mm Welding pair sets: d40, 50, 63, 75, 90, 110 mm Vise-style clamping mechanism for fittings Mirror insert: d170 Metal case for accessories Support stand Allen keys: 4 mm and 8 mm The ST-160 welding bench is equipped with a microprocessor-controlled welding unit. The standard set also includes a special workbench and a metal case with accessories. ST-160 Technical Specifications Feature Specification Socket welding range 40 – 110 mm Mirror (butt) welding range 40 – 160 mm Welding unit power 1200 W Planer power 630 W Power supply 230 V / 115 V Temperature control Electronic regulator Temperature range 180 – 280 °C Temperature indicator LED diode Planer Electric Weight 70 kg

Condition: new, Year of construction: 2025, – Horizontal capacity 1200 kg – Vertical load capacity 600 kg – Table size 1000 mm – Electrically tiltable – Wireless remote control – Digital display Pjdpfxsk Dua As Ahlopt – Documentation – 400 V

Condition: used, Year of construction: 2004, Carriage length: 2250 mm Cutting width at rip fence: 1040 mm Cutting width at crosscut fence: 2900 mm Cutting depth: 154 mm Scoring unit: yes Saw blade height adjustment: electric / position control Saw blade tilting adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: digital readout Crosscut ruler with mitre function: yes Saw blade diameter: 450 mm Psdpfjy Ai I Njx Ahlspt Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 2200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: good (used), Year of construction: 1982, machine/vehicle number: 1501-2, Offer 26128 Technical Data: - Max. load capacity in horizontal position: 5000 kg - Faceplate diameter: 1150 mm - Faceplate motorized tilting: 0 - 130° - Rotary movement electronically steplessly adjustable - Right and left rotation - Welding current transmission: approx. 500 A - Drive: 400 V - Table height in horizontal position: approx. 1220 mm - Handheld remote control Ppodey Ec Emspfx Ahlst - Required space: approx. W 1350 x H 1220 x D 1900 mm - Weight: approx. 3500 kg - Adapter plate with clamping device for round material

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Ppodpfx Ajyz E T Sshlst Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 AK – 3-Axle Aluminum Tipper Semi-Trailer 50m³ – New Vehicle ----Vehicle Data Manufacturer: Fahrzeugbau KEMPF GmbH * Model: SKM 36/3 AK * Design: 3-axle tipper semi-trailer with aluminum box body * Target market: Germany * Permissible total weight: 36,000 kg * Axle load: 3 × 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal coupling height, loaded: approx. 1,200 mm (technically possible 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: approx. 2,430 mm * Body height: approx. 2,300 mm * Body volume: approx. 50.3 m³ * Total height: approx. 3,710 mm to loading edge (loaded) ----Paint / Design Chassis: Deep black RAL 9005 * Attachments: hot-dip galvanized and black powder coated * Axles and wheel hubs: black (KTL-coated) * Body: White aluminum RAL 9006 * Tarpaulin: Silver No. 911 (Mehler) * Contour marking on sides (white) and rear (red) according to EC directives ----Chassis and Running Gear Frame: High-quality welded construction from fine-grained steel, conically cranked (approx. 80 mm) Psdpfx Ahsxn Eb Hslept * Axles: SAF INTRADISC plus Integral – offroad version, disc brakes Ø 430 mm * Lift axle: 1st axle fully automatic, liftable, with forced lowering when empty * Air suspension: Air suspension assemblies with small air bellows (300 mm), plastic covers * Air tanks: Aluminum version * Support legs: 2 aluminum drop legs, max. 24 t (2 × 12 t) * Mudguards: PVC half-shells with rigid spray suppression * Toolboxes: 2 pieces PVC, black, each approx. 660 × 500 × 460 mm * Side underrun protection: right side * Ladder: removable, aluminum, approx. 4,000 mm long * Access ladder: extendable at the rear (not UVV compliant) ----Underrun Protection and Rear Foldable steel underrun protection according to ECE R58.03 * With spring lifting aid and integrated tow eye * Continuous KEMPF splash guard with large reflective panel (200 × 1,130 mm) ----Lighting and Electrics Complete LED version according to ADR standard * Marker, position, reversing, and rear fog lights in LED * 2 LED work lights (left/right) * Cargo area lighting with switch and indicator lamp * 15-pin electrical connection * Round lamps with chrome rings * Without reversing camera ----Tires Rims: Alcoa Ultra ONE alloy wheels, Dura-Bright EVO, offset 120 * Tires: 385/65 R 22.5, brand according to Kempf's choice ----Braking System and Safety Electronic braking system (EBS) Wabco with RSS (Roll Stability Support) * ABS 4-channel (4S/2M) * Parking brake via spring-loaded cylinders * Axle load display via EBS CAN bus (display in cab possible) * Trailer information module SmartBoard (Wabco) * Tire pressure monitoring system (TPMS) according to ECE R141 ----Hydraulics Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system * Smallest piston hard-chromed * Hydraulic connection: Edbro 1" quick coupling, screwed ----Superstructure / Body Aluminum rear tipper body made of hollow profiles * Front wall: 20° sloped, approx. 5 mm thick, with robust brackets for front press * Floor: approx. 7 mm thick, annealed aluminum * Side walls made of aluminum hollow profiles, continuous inner lining 2.5 mm, welded * Rear wall: straight, pendulum type, two-wing (2/3 left, 1/3 right), automatic pneumatic locking * Rear wall control: left switch (pendulum function), right switch (door function) * Grain-tight design * Slide: approx. 400 × 400 mm, lever operated to the left * Dust bag with adapter frame (hopper approx. 250 mm high) * Catwalk with handrail acco

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3695 € 2400 x 1200 mm 3000 kg 482 kg Psdpfxoyq Sr Ee Ahljpt 200 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2400 x 1200 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 32-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 1 PROMOTIONAL PRICE € 4.090,00 (INSTEAD OF € 4.624,00)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2022 € 1500 x 1000 mm 3000 kg 272 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 1500 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model Pjdpsyq Srxofx Ahlspt NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 32-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 1 PROMOTIONAL PRICE € 2.598,00 (INSTEAD OF € 2.951,00)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2697 € 2000 x 1000 mm 3000 kg 348 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Psdpfeyq Srrex Ahlopt Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2000 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 32-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 1 PROMOTIONAL PRICE € 3.239,00 (INSTEAD OF € 3.626,00)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4862 € 3000 x 1500 mm 3000 kg 755 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 3000 x 1500 x 200 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure Ppjdpfoyq Srlex Ahlst * Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 32-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 1 PROMOTIONAL PRICE € 5.153,00 (INSTEAD OF € 5.791,00)

Condition: new, neu ca. 6-8 Wochen ab Auftrag 10265 € 197.09 € 4000 x 2000 mm 850 mm 8000 kg 2340 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners Ppedpfeyq Sqzsx Ahlot

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling Ppodpjwir A Nefx Ahlet - Substructure with stiffeners NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 36-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 2 PROMOTIONAL PRICE € 4.224,00 (INSTEAD OF € 5.108,00)

Condition: new, neu ca. 4 Wochen ab Auftragse 1940 € 2000 x 1000 mm 850 mm 449 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 Pjdowirwaepfx Ahlopt The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, neu 020520 ca. 2 - 4 Wochen ab Auftr 1318 € 28 mm Accessory set consisting of: 4 pcs. screw clamp 180° HIS28Z3000 2 pcs. screw clamp 45° HIS28Z3045 2 pcs. V-support HIS28VP100 12 pcs. quick clamping bolt short HIS28SB100 4 pcs. stop rail 150mm HIS28FA150 Ppsdpfx Ahowirrdjlet 4 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA124275 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu 2486 prompt, Zwischenverkauf v 545 € Psdewirlqepfx Ahlept 1 28 mm Tools are not included in the price.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm * - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 36-PIECE STARTER SET Pjdpowiripofx Ahljpt INCLUDES 12-PIECE HISWELD PACK 2 PROMOTIONAL PRICE € 3.686,00 (INSTEAD OF € 4.433,00)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. Ppedewiriijpfx Ahljt - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 36-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 2 PROMOTIONAL PRICE € 5.120,00 (INSTEAD OF € 6.208,00)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 6400 € 123.52 € 3000 x 1500 mm 850 mm 8000 kg 1544 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners NOW AVAILABLE AS AN ATTRACTIVE PROMOTIONAL PACKAGE: INCLUDES 36-PIECE STARTER SET INCLUDES 12-PIECE HISWELD PACK 2 PROMOTIONAL PRICE € 6.912,00 (INSTEAD OF € 8.218,00) Podpfxewirics Ahljpt

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1190 € 1000 x 1000 mm 850 mm 210 kg 25 mm 28 mm Pedewirg Uopfx Ahlopt - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m²

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1490 € 1500 x 1000 mm 850 mm 344 kg 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet with levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 500 kg/m² Ppsdpfx Ahjwirg Iolet