Used Press Brake Tool Divided 2917 Mm for sale (95,812)

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Dkjdpfxex Sw Suj Aqvon Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Dkedox Sxukjpfx Aqvsn Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, stroke length: 850 mm, operating speed: 8 mm/s, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, overall weight: 407,000 kg, controller manufacturer: Cybelec DNC 1200, working width: 15,400 mm, bending force (max.): 2,000 t, distance between stands: 12,000 mm, number of axes: 8, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section Dksdpfjyvh Arex Aqvjn   Bending examples: 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: excellent (used), Year of construction: 2014, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 2,470 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, controller manufacturer: CYBELEC CNC, working width: 2,100 mm, bending force (max.): 40 t, distance between stands: 1,650 mm, control type: CNC control, number of axes: 4, actuation type: hydraulic, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Dsdpfxsyw Ip Ij Aqvokn Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Dksdsyvh S Tepfx Aqven Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch Dodpfovd Aavsx Aqvjkn CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, Due to a technical malfunction, bidding was occasionally impossible – therefore, a new auction! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by TRUMPF, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connection power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Operating time of press beam: 15,396 h Operating time of hydraulics: 83,212 h Machine operating hours: 152,638 h EQUIPMENT Dkodpfoy T I E Iox Aqvon CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot, 8 m travel path) Vacuum manipulators CNC gripping station Double sheet detection Safety device BendGuard Lasersafe Spare parts: cable track, replacement vacuum plate, BWF fixators (machine feet)

Condition: new, Year of construction: 2024, Bending capacity: 60t Bending length: 1250 mm Distance between uprights (mm): 1050 Material thickness: 7.5 mm Stroke length (mm): 265 Throat depth: 410 mm Installation height: 530 mm Operating speed Y (mm/sec.): 10 Motor power (kW): 7.5 Operating speed X (mm/sec.): 250 Dkedpfxed E If Ss Aqvsn Length (mm): 2300 Width (mm): 1550 Height (mm): 2750 Weight (kg): 3,100 Standard equipment: Y1, Y2, X, R (4 axes) X = 650 mm X, R Control unit: DURMA DT15 European clamping system 60 mm die holder (only for European dies) Throat depth: 410 mm Backgauge: Siemens DC servo-driven, linear guide & ball screw system Protective cover Special accessories: European upper tool P97.75.R08 (one in segmented design) European lower tool M.460R.85 (one in segmented design) DURMA quick clamping system CE with manual F.AKAS II M -FPSC-B-C + safety cover & switch Other machines are available for demonstration at our Staufenberg location. Further information available upon request.

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: 2024 (new) Control system: DT 15 Bending length: 4050 mm Distance between the columns: 3600 mm Y fast Speed: 100 mm / s Y Working speed: 10 mm / s Y Retraction speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Projection: 450 mm 2 support arms 2 back gauge fingers Travel speed X-axis: 350 mm / s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm / s Travel distance R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide and ball screw thread Stop finger back gauge with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Dkjdpfxsff Hvlo Aqven Hydraulic blocks and valves in special design, in accordance with global standards Electrical equipment, in accordance with global standards Option: CE certified Motorized crowning and X & R backgauge Engine power 37 kW Oil tank capacity 250 lt Length 5300 mm width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: Bending force: 600 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 700 mm Projection: 510 mm table height: 990 mm table width: 154 mm Y High speed: 80 mm Y Working speed: 7 mm/sec. Y retraction speed: 80 mm/sec. X axes working speed: 350 mm/sec. R axes working speed: 300 mm R Axes travel distance: 250 mm X axis distance: 750 mm Engine power: 55 kW length: 8050 mm width: 3200 mm height: 4250 mm Weight: 72000 kg Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard Dkodpjfir U Njfx Aqvsn electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Bil0h3uvee R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can meet even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3000 tons of pressure could be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows flexible and comfortable positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. In addition, the press brake is a special design and can be configured according to customer requirements to meet all individual needs. If you are interested in Durma press brake, we are at your disposal for personal consultation. Other machines are also available and can be visited. Feel free to contact us for more information and let's find a customized solution for your needs together. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUEL) Dodpji Da Syjfx Aqvekn Sheet metal support system: sliding support arm Stroke: 750 MM Backgauge type: X=1500 X, R Overhang:1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Under tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: Dkjdofifg Hopfx Aqvjn CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2024, Press brake AD-S 40220 | 4 meters 220 tons Everything can be configured on request, very short production and delivery times. We will be happy to send you further information on request. Technical data: Bending capacity: 220 tons Bending length (mm): 4050 Passage between uprights (mm): 3600 Stroke (mm): 265 Installation height (mm): 530 Projection (mm): 410 Table height(mm): 900 Table width(mm): 104 Y Rapid traverse (mm/sec.): 160 Y Working speed(mm/sec): 10 Y Retraction speed(mm/sec.):140 X axles working speed(mm/sec.): 250 R axes working speed (M): 140 R axes travel distance: 250 X axes distance(mm): 650 Motor power: 22 kW Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 14750 kg Standard equipment Control system: CNC Cybelec ModEva 19T CNC controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes backgauge: X1,X2,R1,R2,Z1,Z2 Control unit: DELEM DA-66T Dkedpefirx Defx Aqvon Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Manual or motorized central lubrication Air conditioning for control cabinet

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Dedpfx Aqed Srk Ssvskn Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. Djdpefin N Sjfx Aqvjkn We will be happy to provide you with further information on request. Technical data on request. AD-R 80400 Bending force: 400 tons bending length: 8050 mm With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration centre gives you the opportunity to get an overview of our machines on site, to be convinced of the quality and precise technology of our products at first hand and to receive the best possible advice that is geared to your company goals. It is our task to be your direct contact person for you, our customer, on site and to offer you services in the areas of training and customer service. We are now happy to accompany you from Germany - from advice, through the purchase and di

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Dedpfx Ajdx Rd Neqvjkn Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, High-performance press brake AD-S 40400 from DURMA: A masterpiece of technology! The DURMA AD-S 40400 press brake combines precision, power and efficiency in a robust package designed specifically for demanding environments. This model not only offers outstanding performance and reliability, but also a wide range of high-quality standard features and options that make it an indispensable tool in your production. Technical data: ・Bending force: 400 tons ・Bending length: 4050 mm ・Clearance between the uprights: 3400 mm ・Rapid speed: 100 mm/s ・Working speed: 8 mm/s ・Return speed: 80 mm/s ・Motor power: 37 kW ・Weight: approx. 27,760 kg Features and benefits: ・Control: With the optional DELEM DA-66T touchscreen control for unsurpassed speed and ease of operation. ・Rugged construction: Reinforced frame for loads up to 200 tons ・Flexibility in use: With 2 support arms and a backgauge with two finger blocks and controlled X-axis for versatile applications. ・Advanced motor power: Equipped with AC servo motor for back gauge and ball screws, it provides fast and precise movements. ・Highly advanced safety: Manually adjustable F.AKAS II M CE safety system protects the operator without compromising on performance. Standard equipment: ・Y1, Y2, X (=650mm), R manual (2 stop fingers) ・Control DT 15 ・Manually adjustable F.AKAS II M CE safety system (on ram) (CE) ・CNC crowning ・Support arms with T-slot and spring-loaded folding stop, laterally adjustable on linear guide Dodpfx Aorwniqjqvokn ・Durma tool system holder ・AC servo motor for backgauge and ball screws ・Shields at the side and rear Options: ・DELEM DA-66T touchscreen control for intuitive operation ・6 axes - Extended X/R/Z1/Z2 X=750 mm backgauge options ・Reinforced frame, designed for a load of 200 tons per 1 meter, total pressing force is maximum 400 tons Price information: ・The price quoted is for the machine only. Tools and freight costs are not included.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 150 t, operating speed: 200 mm/s, total length: 3,770 mm, total width: 1,855 mm, total height: 2,540 mm, overall weight: 8,500 kg, working width: 3,100 mm, back gauge: 1,000 mm, distance between stands: 2,600 mm, HACO OPTIFORM 30150 (IN STOCK) HACO OptiForm. Compact, powerful and quickly available. With over 60 years of experience in sheet metal working, HACO introduces the new OptiForm press brake: a compact, high-quality machine built in Europe that combines premium performance with a surprisingly competitive price. Despite its compact size, the machine is built on the basis of the proven technology of the Synchromaster series. Think of the same hydraulic connections and high-quality components – a solid basis for reliability and a long service life. Press brake features: Working length: 3100 mm Capacity: 150 tons Distance between the cheeks: 2600 mm C-frame discharge: 400 mm Daylight opening: 480 mm Table height: 965 mm Rapid travel Y-axis: 200 mm/s Press travel Y-axis: 10 mm/s Return travel Y-axis: 130 mm/s Motor power: 15.0 kW Dsdpfx Aswnddveqvokn Total length: 3770 mm Total depth: 1855 mm Total height: 2540 mm Weight approx. 8,500 kg The machine is also equipped with: ===== - EASYBEND 2D CNC control - 4-axis back gauge X-R axis travel 1000 - CNC controlled crowning - Equipped with DSP lasersafe finger detection - Fast manual clamping for European Standard tools, intermediate pieces height 150 mm or 100 mm - Movable support arms Delivery + installation at your location is of course possible, delivery costs and additional costs in consultation. We have been the Dutch dealer for HACO press brakes and shears since 2019. In addition to the sale of sheet metal working machines, we offer a total package for service, maintenance and repairs.

Condition: good (used), Year of construction: 2011, Used 3.6 meter CNC press brake from Haco Type: ERMS 36220 Capacity: 3600 x 220 tons Djdoy N Uadjpfx Aqvskn FastBend 2D CNC control Y1, Y2, X, and R axes CNC controlled CNC crowning Akas Fiessler laser safety Year of manufacture: 2011 1 set of complete tooling for 1 to 6 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 9 kW (12.24 HP), pressing force: 125 t, stroke length: 220 mm, throat depth: 410 mm, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, overall weight: 10,500 kg, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, distance between stands: 2,610 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulic clamping of punches Segmented tooling MACHINE OFF GROUND Dodpfxswrx Tms Aqvjkn Specifications Bending length: 3050 mm Power: 125 tons Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Dkjdpfey T R Ryox Aqven Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Equipment • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system All information is provided without warranty. A live demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 50 t, stroke length: 215 mm, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V500 Year of manufacture: 2005 Technical data Manufacturer: Trumpf Type: TrumaBend V500 Year of manufacture: 2005 Capacity: 50 t Working length: 1250 mm Stroke: 215 mm Distance between uprights: 1040 mm C-frame overhang: 420 mm Installation height: max. 385 mm Working speed: 10 mm/s Return stroke speed: 220 mm/s Voltage: 3 x 400V Rated current: 21.5 A Connected power: 8.6 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4.9 t Equipment • Trumpf TASC 6000 control system • Pneumatic die shifting • Hydraulic tool clamping, top and bottom, Wila/Trumpf • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Bend-Guard safety light curtain, front • Tool package: - Upper tool 202/K, straight, R1, H 120mm, L = 1,250mm, segmented Dedpfx Aqey T Hx Tovekn - Lower tool EV/S W6/84°, L = 1,225mm, segmented - Lower tool EV005, W16/30°, L = 1,090mm, segmented - Lower tool V24/80°, L = 1,120mm, segmented All information is without guarantee. A live demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Dksdjy Nydzjpfx Aqvjn Model: CNCL 80 3100 Capacity: 3100 x 80 tons Y1, Y2, and X axes CNC controlled CNC crowning Flat pressure table Year of manufacture: 1993

Condition: used, Year of construction: 1990, Used 4 meter press brake Type: Haco PPES 40110 Capacity: 4100 x 110 tons Y1, Y2 and X CNC controlled Euro tool clamping system Dodpfxey Nyc Rj Aqvekn PC20 CNC control 1 set of tools included (not shown in pictures) Year of manufacture: 1990

Condition: used, CNC lathe GILDEMEISTER, type GD 160 with Gildemeister - Fanuc Mate TS control - Power chuck BERG, Ø 200 mm - 12-station tool turret, VDI 40 - 6 tool holders VDI 40, installed Dksdpfxjy T R Ire Aqvsn Machine footprint with chip conveyor: L x W x H 4200 x 2200 x 2100 mm Weight: approx. 4 tons We are making room Affordable machine – ideal for export