Used Painting Installation (Wet Paint) for sale (12,552)

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Ndodpfxoyx N Hqe Aqwea Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: used, mileage: 1,595 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder 4-bellow air suspension, 1200mm, 315/80, final drive ratio 2.47, CB radio pre-installation, sun visor, LED, retarder, NH4C, side trim panels, Technology Package 4 Cab paint: Moondust Silver Fixed passenger seat Without upper bunk Hot air auxiliary heater Navigation Electro-hydraulic steering with three driving modes (Comfort, Balance, Direct) 4-bellow air suspension (rear axle) Light-colored dashboard Window decals, 4-bellow air suspension, 980mm, LowLiner, 355/50, final drive ratio 2.31, Winter Package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Coupling height 980 Front overhang 1450 Rear overhang 873 Overall length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 L SCR tank Diesel tank 372 liters 600 L main tank Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane departure warning Emergency braking assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (high-quality upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Light automatic system Leather-wrapped steering wheel Multifunction steering wheel switches 8" instrument cluster Multimedia system with 7.2" touchscreen Exterior sun visor Roof spoiler Side spoilers Side skirts On-board internet Nsdpfx Asyvm Nqsqweda

Condition: excellent (used), 18.50 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Rack Length: 18,500 mm Upright Height: approx. 10,300 mm Upright Depth: approx. 1,100 mm Upright Type: PB-80 Profile: 80 x 60 mm Layers: bolted Upright Finish: galvanized Clear Bay Width: 3,600 mm Crossbeam: 3,600 x 120 x 45 mm Crossbeam Finish: blue painted (RAL 5015) Number of Bays: 5 Number of Levels: 7 including floor space Max. Pallet Weight: 500 kg Maximum Bay Load: 2,000 kg Maximum Bay Load: 12,000 kg Pallet Positions: 140 Scope of Delivery 6 x Uprights 10,300 x 1,100 mm galvanized 60 x crossbeams 3600 x 120 x 45 mm blue Technical Summary Uprights: 10300 x 1100 mm, profile 80 x 60 mm, galvanized, bolted truss construction. Crossbeams: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface provides long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and transverse braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimension is typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. With standard pallet heights (1.20 m), you can install 6 beam levels in the 10.3 m high racking system. Together with the floor-level storage spaces, this results in 7 storage levels, providing a total of 140 pallet spaces with 4 pallets per bay. Ndedsyvrv Aspfx Aqwoa "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), 7.4 m Nagy PB-80 Pallet Rack With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high rack. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per bay. Material & Construction: The galvanized surface offers long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and cross braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimensions are typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. Manufacturer: Nagy Type: PB-80 Shelf length: approx. 7.40 m Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Frame: bolted Upright finish: galvanized Clear span: 3.60 m Crossbeam: 3600 x 120 x 45 mm Crossbeam finish: blue painted (RAL 5015) Number of bays: 2 (basic bay + 1 extension bay) Number of levels: 7 incl. floor storage space Max. pallet weight: 500 kg Permissible shelf load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 56 Scope of delivery 3 x uprights approx. 10.30 x 1.10 m galvanized 24 x Crossbeam approx. 3.60 m blue incl. locking pins Your partner for safe warehouse logistics: Assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether new installation, conversion, or warehouse closure – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Mezzanine floors for optimal space utilization Rack inspection & testing according to DIN EN 15635 Safety is a legal obligation. We conduct the annual expert inspection (according to DGUV Regulation 108-007): - Inspection for deformations and damage. - Checking of locking pins and load capacity labels. - Creation of a legally compliant inspection report including an inspection sticker. Njdpfoyvr Aiox Aqwsda We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de You can find more pallet racking – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Nagy PB-80 Extension Bay for Pallet Racking With a standard pallet height of 1.20 m, you can install 6 beam levels in the 10.3 m high extension bay. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per bay, provides a total of 28 pallet spaces per bay. Material & Construction: The galvanized surface offers long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and cross braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Profile: The 80 x 60 mm profile dimensions are typical for medium to heavy-duty pallet racking uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. Manufacturer: Nagy Type: PB-80 Upright height: approx. 10.30 m Upright depth: approx. 1.10 m Upright type: PB-80 Profile: 80 x 60 mm Ndsdpfx Aqjyvr Dgowja Troop frame: bolted Upright finish: galvanized Clear span: 3.60 m Crossbeam: 3600 x 120 x 45 mm Crossbeam finish: blue painted (RAL 5015) Number of bays: 1 add-on bay Number of levels: 7 incl. floor storage space Max. pallet weight: 500 kg Permissible bay load: 2000 kg Permissible bay load: 12000 kg Pallet spaces: 28 Scope of delivery 1 x upright approx. 10.30 x 1.10 m galvanized 12 x crossbeams approx. 3.60 m blue incl. locking pins Your Partner for safe warehouse logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether new installation, conversion, or warehouse closure – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving for small parts and archives - Mezzanine floors for optimal space utilization Racking inspection & testing according to DIN EN 15635 Safety is a legal obligation. We conduct the annual expert inspection (according to DGUV Regulation 108-007): - Inspection for deformations and damage. - Checking of safety pins and load capacity labels. - Creation of a legally compliant inspection report including an inspection sticker. We would be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Find more pallet racking – new and used – in our shop! International shipping costs on request!

Condition: used, mileage: 238,353 km, power: 132 kW (179.47 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 3,620 kg, overall weight: 7,000 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, airbag, cooling unit, electric window regulation, onboard computer, power assisted steering, power mirror, tail-lift, Special features - 3 seats - Cruise control - Electric windows - Electrically adjustable and heated mirrors - On-board computer - Radio CD - Airbag - Power steering - Central locking with remote control - ABS - ASR (traction control) - Air conditioning - New windscreen Body Deep-freeze body by LAMBERET: - Internal dimensions: 4.10 x 2.05 x 2.15 m (L x W x H) - Volume: 18.07 m³ - Interior lighting - Access steps - Non-slip floor Carrier Pulsor 500 unit: - Evaporator - Standby and night operation 230V - Aggregate is powered by its own diesel engine when driving Tail lift: Dhollandia DHLM.10 - Load capacity: 1,000 kg - Remote control For sale is an Iveco Daily 70C18 with a high-quality deep-freeze box body by the renowned French manufacturer Lamberet. The body impresses with its robust construction, high-quality insulation, and well-thought-out functionality—ideal for professional refrigerated transport. With its spacious loading area, the vehicle offers plenty of space for your goods. Equipped with a sturdy tail lift with a lifting capacity of 1,000 kg, it allows for convenient and efficient loading and unloading. The internal dimensions are 4.10 x 2.05 x 2.15 m (L x W x H) and the loading volume is 18.07 m³. New roadworthiness inspection (TÜV)! Available immediately from our warehouse in Langenfeld! ACR-Juretzki Nutzfahrzeughandels GmbH—your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is done exclusively with original photos taken directly at our site, ensuring full transparency regarding the actual condition of the vehicle. Our vehicles undergo comprehensive reconditioning in our in-house specialist workshop before sale—covering mechanics, bodywork, and paint. They are thus optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good—verification is better: upon request, the vehicle can be independently inspected by organizations such as TÜV, DEKRA, or KÜS—also as part of a remote inspection. Nsdpfxjyrcvqj Aqwoda Our service offering for you: - Delivery of your vehicle to your desired location - Complete processing of export documentation, including export license plates - Tailored financing and leasing offers - Trade-in of your current vehicle - Installation of custom equipment according to your needs Looking for something specific? If you do not currently find a suitable vehicle for your company in our inventory, please contact us—we are happy to assist. For technical details, further photos, or a personal consultation, we are available to you at any time. All stated prices are net prices. The content of our website has been compiled with the utmost care and is regularly updated. Nevertheless, it serves only for general information and does not replace individual consultation. Only the information in the sales contract is binding. Subject to changes, errors, typographical mistakes, and prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, working width: 720 mm, Model: SFML-720C Weight: 840 kg Power: 8.5 kW Voltage: 220 V Nsdpjyxl Tyjfx Aqwoda Date of manufacture: 2011 CE certified

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 160 S1M - Pressing force: 1600 kN Ndedpfx Asycl Hgsqwja - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion selectable: 630 kN, stroke: 200 mm - Drive: 17 kW - Dimensions: 3500 x 2000 x 1200 mm - new control system, new switch cabinet, light curtain (1-stroke, 2-stroke, safety), new hydraulics, - new seals, paint finish as requested - new UVV safety inspection

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Ndodpewx Dctsfx Aqwea Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Ndjdpfx Ajwag Rijqwea Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, mileage: 33,030 km, power: 120 kW (163.15 HP), first registration: 02/2019, fuel type: diesel, tire size: 195/75R16C, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, differential lock, onboard computer, Special Features - New tires - ABS - Power steering - Central locking - Air conditioning - Radio - Airbag - Driver's seat with armrest - Electrically adjustable and heated exterior mirrors - Electric windows - Electronic immobilizer - Cruise control - Differential lock - On-board computer - Rear-view camera Superstructure Aerial work platform France Elevateur 172 TPFc - Working height: 17.5m - Lateral outreach: 8.2m - Basket load capacity up to 200kg - Remote control - Engine start/stop function - Emergency pump - Hour meter - 2 x A-frame stabilizers - 400° slewing range with hydraulic rotary drive and safety brakes - Telescopic boom with dual extension via hydraulic cylinder and movable basket arm (135°) - One-hand joystick proportional control for hydraulic movements in the basket - Overload sensor - 2 x 60° electrically operated basket rotation - Rear platform with aluminum chequer plate - Warning beacons - 230V power supply in the basket The 172 TPFc aerial work platform from French manufacturer France Elevateur is mounted on a Renault Master. The hydraulic pump is powered via the PTO on the transmission. All platform functions are fully operational and have been checked by our workshop. The vehicle is ready for registration. German registration documents, TÜV and UVV certification are included free of charge. Additional equipment such as trailer coupling, lighting, shelves, and more are available on request. Available immediately from our Langenfeld stock! ACR-Juretzki Commercial Vehicle Trading GmbH – Your reliable partner for used commercial vehicles All vehicles we offer are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation uses only original photos taken directly in-house – guaranteeing complete transparency regarding the actual vehicle condition. Our vehicles undergo comprehensive preparation in our own specialist workshop before sale – including mechanics, bodywork, and painting. This ensures optimal preparation for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – verification is better: At your request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our services for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Customized financing and leasing offers - Trade-in of your current vehicle - Installation of special equipment as per your requirements Looking for something specific? If you do not currently find a suitable vehicle for your business in our inventory, please contact us – we are happy to help. For technical details, more photos, or a personal consultation, we are always at your disposal. Ndodewyn H Sepfx Aqwea All prices quoted are net prices. The contents of our website have been prepared with the utmost care and are regularly updated. Nevertheless, they are for general information only and do not replace individual consultation. Only the terms stated in the purchase agreement are binding. Subject to changes, errors, typographical mistakes, and prior sale.

Condition: new, mileage: 40 km, power: 140 kW (190.35 HP), overall weight: 7,490 kg, fuel type: diesel, color: white, total width: 2,150 mm, total height: 2,265 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU ? Commercial Vehicle Center in Germany, specializing in expertise, service, and consultation, offers you: Alternative to the FUSO 7C18 / 9C18: ISUZU M30 H chassis with a wheelbase of 3,365 mm Net / Export price: from €48,774 Available wheelbases: 2,765 mm, 3,365 mm, 3,815 mm, 4,475 mm with single and double cabin versions Optional gross vehicle weight upgrade to 8,500 kg possible! 2-year warranty on the basic vehicle from the date of first registration Standard equipment includes: - 5.2 L turbo diesel with common rail direct injection 140 kW / 190 hp EURO VI OBD-E (max. torque 510 Nm at 1,600 – 2,800 rpm) - Particulate filter system with DPD system and AdBlue (the self-cleaning system allows the filter to be cleaned without visiting a workshop thanks to the new DPD regeneration technology, which indicates when the function is required. You simply press the DPD button and the system cleans itself in 20 minutes) - 6-speed manual transmission or automated manual transmission (NEES II) with 6 gears and torque converter (surcharge net €1,656), including cruise control. The installed torque converter allows wear-free and precisely controlled starts! Gears can also be changed manually via the shift lever. Depending on the load condition, the driver can preselect whether to start in 1st or 2nd gear using a selector button. - Front leaf suspension (max. 3,100 kg), rear leaf suspension (max. 5,800 kg), front and rear stabilizers - 215/75 R17.5 C tires, single tires on front axle - Twin tires on driven rear axle, spare wheel - Ventilated disc brakes front and rear - Cruise control, speed limiter (90 km/h) - Engine brake - Electric parking brake - On-board power supply 24 V, alternator 90A, 2 x 90 Ah batteries - Diesel tank 100 liters / AdBlue tank 16 liters Nedox Hb Ayspfx Aqwjda - New, modern cabin with excellent space utilization, generous headroom and ample knee clearance, outstanding ergonomics and visibility, low entry height - BI-LED lighting with headlamp cleaning system for optimal night-time visibility - Double door seals also reduce noise transmission into the cabin, supporting a pleasant acoustic environment - Cigarette lighter, cup holders, storage compartments in door panels and roof lining, armrests in door panels - Cab paint: Arc White 729 - Vehicle dimensions: Cab width 2,040 mm, rear axle width 2,115 mm, cab height 2,265 mm (top of cab), chassis height 800 mm, chassis width 850 mm - Suspension driver’s seat - Front passenger double bench seat, 3-seater, headrests, seat belt reminder - Driver and passenger airbags, seatbelt tensioners for driver and passenger - Height and tilt adjustable steering wheel, multifunction steering wheel, interior mirror - Electric windows - Electrically adjustable and heated exterior mirrors - Electronic immobilizer - Double-DIN DAB+ radio 6.8" with Bluetooth hands-free function, Apple CarPlay / Android Auto compatible, USB charging port - 7" driver information display - Fog lights, daytime running lights, automatic lighting - Reversing warning signal - Central locking with remote control - Manual air conditioning - Digital EU tachograph Safety Pack 2 features: - ABS: Anti-lock braking system - ASR: Traction control system on rear axle - EBD: Electronic brakeforce distribution - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Emergency braking before an obstacle - FVSN: Forward field recognition - DDAW: Drowsiness

Condition: new, power: 167 kW (227.06 HP), fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Equipment: * 12t distribution axle, extended day cab, roof-mounted air intake * Mechanically reinforced cab suspension * Extended day cab * Central locking, 3 keys, 2 remote controls * Green translucent exterior sun visor * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green-tinted windows * Side and rear windows non-glazed * 5 mirrors * Electrically adjustable mirrors * Front view mirror * Mirror brackets for body width 2.50 - 2.60 m * Headlight beams for right-hand traffic * Reversing camera * Adjustable roof spoiler * ETD white * Headlamp surround and bumper in cab color * Roof spoiler in cab color * Cab steps and wheel arches in cab color * Chassis painted anthracite grey * Pneumatic steering column lock * Roof hatch with manual operation * Driver seat: air-suspended luxury driver's seat * Armrest driver's seat * ECAS remote control * Converter 24V to 12V, 15A, 180W * Left-hand drive * Soft-touch steering wheel, color black * Black seat belts * Passenger seat: fixed, velour * Engine tunnel storage compartment * Air conditioning * Power windows, electric * Digital tachograph, VDO 1C, version G2V2 * Adaptive cruise control with FCW and AEBS-3 * Pre-installation for toll system * Speed limiter setting 85 km/h * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS interface, pre-wired * FM/DAB/DAB+ radio with speakers incl. phone connection * Driver Performance Assistant * Lane change warning system * Electronic Stability Control (VSC) * Reversing warning system * Basic immobilizer * Hill start assist * DAF Side and Turn Assist * Alcohol interlock, pre-installed * Speed limit recognition * DAF Drowsiness Detection * Conforms with UN regulations R155 and R156 Ndjdpfx Aqox Hmz Iewea * Rear: 8.50 t, air suspension, SR8.14 * Front: 4.50 t, parabolic, 45N * Front axle 1, 4,480 kg, load index 136 * Rear axle 1, 8,480 kg, load index 134 * Silver-grey wheel trims * Tire pressure monitoring system * Front axle(s): 245/70R17.5 * Driven rear axle(s): 245/70R17.5 * Steel disc wheels, silver-grey * F1, 245/70R17.5 GO KMAXS2 136/134 M Steering CCA 3P * R1, 245/70R17.5 GO KMAXD2 136/134 M Traction CCA 3P * RR, not applicable * Rear axle ratio 3.73 * Mechanical differential lock * 8-speed PowerLine 8AP1000 overdrive gearbox, 4.89-0.64 * PX-7 engine, 167 kW/227 hp. Cab badge: 230 * Emissions class Euro 6 * Traction control (ASR) * Idle shutdown automatic, 5 minutes * PowerLine automatic transmission, 8-speed * Parking brake actuation with test position * Exhaust brake * Wheelbase 5.40 m / rear overhang 2.43 m * One wheel chock * Plastic fuel tank, 185 l * Standard component arrangement * Front underrun protection * Splash guard * AdBlue® tank 30 l, right chassis side * Fuel tank on the left * AdBlue® tank filler cap without lock * Temporary rear light brackets * Rear lights with bulbs * Battery box on the left, no spare wheel mount * Longitudinal members 210/6.0 mm, without internal reinforcement * EAS unit on right, discharge to the rear right * For operation with drawbar trailer, type plate up to max. GVW * Pneumatic trailer connection, turntable coupling * Crossmember D85-Dc70-V25, coupling D85, mounted * Trailer electrical connection + EBS, 24V/2x7-pin * Body mounting: BAM 1, loose brackets * Fixed connection for engine speed control chassis * Body connector on chassis * Side marker lights * Tail lift application * Alternator 100A, batteries 2 x 175 Ah * Technically permissible GVW

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 90 mm, Dear Sir or Madam, We hereby offer you a very well-maintained milling machine of the type Deckel FP4M (K) aktiv, featuring a rotary-tilt-swivel table and a 4-axis digital readout. With its extensive equipment, this model truly stands out among conventional machine tools. The machine has been thoroughly inspected in our workshop, is therefore in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Immediately available Machine No.: xxxx-xxxx Year of manufacture: xxxx Table version: Rotary-tilt-swivel table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7kW / 4.4kW Travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Ndedpfx Aqsvvtlgjwea Further features and accessories include: 4-axis digital readout (Heidenhain), 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, machine feet, operating manual, and much more upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the selected machine - You are free to choose the paint color of your selected machine - If desired, you can order additional accessories such as tools, etc. directly - On request, we can install other accessories such as safety devices - We are happy to take care of shipping and/or installation

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING Ndsdjvv Rfkopfx Aqwoa As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 100.000 Liters Diameter: ca. 2.900 mm Length: ca. 15.750 mm Weight: ca. 18.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch Ndodpfehui D Eox Aqwsa • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 30.000 Liters Diameter: ca. 2.000 mm Length: ca. 9.940 mm Weight: ca. 5.500 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Ndedpfx Aehui Hkjqwsa Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Njdpfx Aqjk S Dt Toweda Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Nedpfsi Riwmsx Aqweda Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Ndjdei Ri A Ijpfx Aqwea Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Painting Frame: DB 7350 Novagrau "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm Nedpfx Aqoi Ri Euswjda 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) Ndjdpfx Aqei Ri Exowja 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year

Condition: used, mileage: 607,408 km, power: 260 kW (353.50 HP), first registration: 12/2003, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro3, color: white, Equipment: ABS, air conditioning, * Our internal number: 1114 * Take-away price - Pick-up price * O 530 G Ndjdpstpr U Rsfx Aqwsa * EZ 30.12.2003 * Large air conditioning system * 260 KW / EURO 3 * ZF automatic transmission * Matrix display * Folding windows * Electric wheelchair ramp installed * Tinted glass * Video surveillance * Ticket dispenser wiring * Lifting/lowering * 3 x double-wide interior swing doors * Compressor replaced * Alternator replaced * New four-circuit protection valve - 10/21 * All V-belts and rollers new - 10/21 * New paint: 2019 * Clean frame! * Extensive CUSTOMER SERVICE in October 2021 - air filters, fuel filters, oil filters, etc. * etc. * All information is provided without guarantee. * We reserve the right to sell items prior to purchase.

Condition: used, Hensoldt Wetzlar centering microscope MK4 Condition used Nodpfx Aqeurlyqowsda Centering microscope with tightening thread suitable for lid machines

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m Ndsdpou Ictnsfx Aqwsa AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads - hydraulic power unit accessories: - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *