Used P. Ries Gmbh 330 D Atex for sale (105,083)

Condition: new, Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400 Technical specifications: - Steel frame - Two rolls direct driven by a gear system - Rolls are hardened - Rolls shafts are special steel material hardened and ground - Roll shafts housed by bearings - Standard rolls - Guide rolls - Horizontal and vertical working position Options: - Digital Readout EURO 600,-- - Angle Lateral Guide Rolls EURO 900,-- - Double Speed Working   EURO 600,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   PK 35 file TypeSizeMin. DiaNotes160x10         40x10500         400Standard Rolls2100x15         60x10450         350Standard Rolls335x35         20x20900         300Standard Rolls4Ø 35         Ø 30600         400Optional Rolls5Ø 70x2 Rsdpfsd Eqqwsx Aquou         Ø 30x21000         500Optional Rolls62”x2,9         1”x2,31000         350Optional Rolls7 70x30x2         50x40x31200         1200Optional Rolls8 50x3         40x31700         600Optional Rolls9 50x50x5         40x40x5800         600Optional Rolls1050x50x6         30x30x31000         500Optional Rolls1160x7         30x4 700         400Standard Rolls1260x7         30x4800         500Standard Rolls1360x7         30x4 700         500 Standard Rolls14UPN 80         UPN 301000         500Optional Rolls*15UPN 80         UPN 301200         800Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: new, pressure: 50bending length: 2040column width: 2040daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3170x1960x2500weight approx.: 4850motor power: 11CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Rjdpfxjd Etfye Aqusu

Condition: new, pressure: 40bending length: 1530column width: 1530daylight: 590stroke lenght (max.): 300messurements (LxWxH): 2660x1960x2500weight approx.: 4600motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Rsdpsd Etfzsfx Aqusu

Condition: new, pressure: 200bending length: 4080column width: 4080daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5740x2130x2680weight approx.: 13000motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Rodsd Etf Aspfx Aquou

Condition: new, column width: 2000 x 1000retracting speed: 150weight approx.: 35.000stroke: 800total power requirements: 30daylight: 1000rapid traverse: 120pressure: 500: 2500 x 1500working speed: 12messurements (LxWxH): 2500x2700x5400 Rjdsd Aca Aopfx Aqueu

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Technical specifications: - Steel construction welded frame - 3 Rolls are powered Redpsh Alh Ujfx Aqueu - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting Rjdpfxsmr Hpce Aquou 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: excellent (used), Protein cooker direct from Meat-free factory. 6 rack capacity. Lovely condition. Redpfx Aqot R Skmeueu

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Rjdpfx Aqoy Urvaousu Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Rjdpfjy Urtfjx Aqusu Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), mileage: 721,385 km, power: 375 kW (509.86 HP), first registration: 12/2015, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x2, wheelbase: 5,100 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 9,810 mm, total width: 2,550 mm, total height: 3,540 mm, loading space length: 6,180 mm, loading space width: 2,490 mm, loading space height: 790 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, cruise control, parking heater, traction control, trailer coupling, = Additional Options and Accessories = - Digital tachograph - Tachograph (control device) - Globetrotter cab - PTO (power take-off) - Pump = Notes = Number of axles: 4, Configuration: 8x2, Unladen weight: 17,070 kg, Gross weight: 35,500 kg, Total tank capacity: 440 liters, Trailer hitch, Kingpin diameter: Special, Number of differential locks: 1, Suspension type: Air suspension, Cab type: Globetrotter, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heater, Color: Multicolor, Engine manufacturer: Volvo, Engine power: 375 kW (503 HP), Euro 6, Transmission type: I-Shift, Gears: 12, Power steering, ABS, ASR, PTO (power take-off), Pump, Crane, Crane manufacturer: Palfinger PK 33002-EH E, Year of crane: 2015, Crane load capacity: 33, Maximum load: 1,340 kg at 16.5 m, Number of outriggers: 2, CE certified, Control position: Side operation left, Remote control, Crane position: behind the driver’s cab, Sliding: 6, Hydraulic auxiliary connections: 4, PALFINGER PK33002 6X HYDRAULIC EXT, 6+7 FUNCTION, REMOTE = Further Information = Drivetrain Engine brand: VOL Axle Configuration Brakes: disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 5 mm; Tire tread right: 6 mm; Suspension: Leaf springs Axle 2: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread left: 9 mm; Tire tread right: 11 mm; Suspension: Air suspension Axle 3: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 20 mm; Tire tread left outer: 18 mm; Tire tread right inner: 20 mm; Tire tread right outer: 20 mm; Suspension: Air suspension Axle 4: Tire size: 385/65R22.5; Lift axle; Steered; Tire tread left: 6 mm; Tire tread right: 4 mm; Suspension: Air suspension Weights Unladen weight: 17,070 kg Payload: 18,430 kg Gross vehicle weight: 35,500 kg Rsdpovcxh Hofx Aqueu Functional Crane: Palfinger PK 33002-EH E, year 2015, behind the cab Loading platform height: 123 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our offering includes all European brands across different model years and price ranges. Why buy at Kleyn Trucks? It’s simple! • Large, fast-rotating stock • Recognizable quality • Good prices • Professional business conduct • Multilingual support • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of "recognizable quality" • And much more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send us an inquiry via our website. Ask us directly about our European warranty package.

Condition: used, mileage: 144,999 km, power: 110 kW (149.56 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,970 mm, total width: 2,020 mm, total height: 2,620 mm, permissible axle load (axle 1): 1,860 kg, permissible axle load (axle 2): 2,250 kg, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, General information Number of doors: 6 Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 1.950 cc Max. front axle load: 1860 kg Max. rear axle load: 2250 kg Weights Empty weight: 2.335 kg Carrying capacity: 1.165 kg GVW: 3.500 kg Functional Tail lift: Barr , 600 kg Make of bodywork: Carrier Koel/vries Bi-Tmep+ bar klep Maintenance APK (MOT): tested until 07/2027 Financial information Price: On request VAT/margin: VAT qualifying = Additional options and accessories = - Airbag - Camera system - LED- lighting - Outside temperature display - Suspension seat Redpszauw Nefx Aquou = Remarks = Carrier Coolingengine Cooling/Freezing/Heating Day and nicht plug 6 Pieces in stock

Condition: used, axle configuration: 3 axles, first registration: 08/2014, color: other, Year of construction: 2014, Empty weight: 4.962 kg Redjy Uw Rcopfx Aquou Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Year of construction: 2014, condition: used, Industrial water treatment and distillation system for the treatment of industrial wastewater and process water, with integrated control, collection tanks, and a new pump following a recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of manufacture: approx. 2014 Operating manual available Control with touchscreen HMI Rodsy S Rr Uspfx Aquou USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Inspection recently carried out Collection tank for industrial wastewater available Collection tank for distillate available Tank material: PP gray Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solution Tank volume, industrial wastewater: approx. 10,280 liters Tank volume, distillate: approx. 10,732 liters Tank volume, VacuCIP tank: approx. 1,306 liters Permissible operating temperature, tanks: 40 °C Permissible operating temperature, VacuCIP tank: 80 °C Specific weight, tanks: 10.00 kN/m³ Specific weight, VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Concentration: 1:10 Closed industrial design Pipeline and tank system made of stainless steel and plastic.

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack Rsdpfjyycqxjx Aqueu • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: used, Year of construction: 2021, operating hours: 14 h, machine/vehicle number: GS30MD-4382, Drive: Wheel Empty weight: 893 kg Lifting capacity: 227 kg Rjdpjtr Nxbefx Aqusu Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 1 h, machine/vehicle number: GS30MD-4378, Drive: Wheel Empty weight: 893 kg Lifting capacity: 227 kg Rjdpfxotr N H Ao Aquou Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 133 h, machine/vehicle number: GS30MD-4381, Drive: Wheel Empty weight: 893 kg Lifting capacity: 227 kg Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Redetr Nbijpfx Aquou Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 111 h, machine/vehicle number: GS30MD-3936, Drive: Wheel Empty weight: 893 kg Lifting capacity: 227 kg Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Rjdpfx Aetr I Tuoqusu Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 1 h, machine/vehicle number: GS30MD-4383, Drive: Wheel Empty weight: 893 kg Lifting capacity: 227 kg Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Rodpfxotr Nzps Aqueu Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2020, operating hours: 1 h, machine/vehicle number: GS30MD-3886, Drive: Wheel Rsdotr N Dgopfx Aqusu Empty weight: 893 kg Lifting capacity: 227 kg Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 5 h, machine/vehicle number: GS30MD-4064, Drive: Wheel Empty weight: 893 kg Lifting capacity: 227 kg Working height: 590 cm Transport dimensions (LxWxH): 1.41x0.78x1.68 Rjdpfx Aqetr Nkyeuju Please contact PFEIFER GROUP for more information

Condition: excellent (used), mileage: 856,000 km, power: 242 kW (329.03 HP), first registration: 04/1999, fuel type: diesel, number of seats: 37, gearing type: mechanical, axle configuration: 4x2, emission class: euro2, color: white, brakes: retarder, suspension: steel-air, wheelbase: 4,900 mm, Year of construction: 1999, Equipment: air conditioning, power assisted steering, = Additional options and accessories = - Electric windows - Air conditioning - Leather interior - Leather upholstery - Air-suspended seats - Radio/CD player - Sliding roof - Toilet - Automatic heating system = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,630 cc Front axle: Max. axle load: 6,500 kg; Tire tread left: 80%; Tire tread right: 80%; Suspension: leaf-spring suspension Rear axle: Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Suspension: air suspension Dimensions Dimensions (L x W): 1,036 x 250 cm Weights Unladen weight: 11,660 kg Rsdpfey T H Rpsx Aquju Payload: 6,340 kg Gross vehicle weight (GVW): 18,000 kg Interior Upholstery: Leather Condition Technical condition: very good Visual condition: very good Further information Please contact Andre, Henri, or Andre for more information.

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical broaching machine VADARI GmbH TYPE SRM 2027 - 60 KN - New machine - BROACHING MACHINES MADE IN GERMANY. - Currently available at special conditions - - Used machine available - ==> Information for manufacturing companies or dealers with their own production: If desired, the drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a variant with 9 tons of traction force) for the broaching machine can be purchased from us. If interested, please contact us. —-Currently available at special conditions— ==> The new machines are manufactured by us according to customer orders. Short-term production and delivery are possible. ==> Spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are currently available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal gearing, etc.) and accessories available. Please inquire separately. All broaching tools and tool holders from other manufacturers can continue to be used with our broaching machine! Complete production and assembly take place at our plant in Germany. In addition, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears and all other required components - including electrical components). Vertical broaching machine Type SRM 2027 - NEW MACHINE: The application area is mainly in the production of keyway slots from 3-28 mm (but also larger) and profiles of similar dimensions. The compact machine, which requires little space, can therefore be used successfully in small, medium and large companies. The low price justifies the purchase even for small series and individual production. Redpfx Aqeuqbnhjusu The drive is via a pole-changeable gear brake motor. The maintenance-free double spindle drive ensures smooth operation and a central pulling point, as well as consistent cutting performance. The free tool table allows even large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be clamped securely. The stroke adjustment is done by adjustable limit switches with stroke limitation. With short hubs/workpieces, several workpieces can be placed on top of each other. Broaching tools, mandrels and spare parts available on request. Technical data: Tractive force: 60 KN at 3 m/min, 40 KN at 6 m/min. Broaching speed: 3 m/min + 6 m/min. (Optional: stepless speed adjustment (from 0 m/min to 6 m/min possible via extended electronics) Return speed: 6 m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350 mm Table through-hole: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Overall machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Painting: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: Standard equipment Coolant system: Standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: used, plate width 330 mm plate depth 1010 mm plate height 50 mm Redpfx Aqjy Sumisusu weight of the machine ca. 110 kg LxBxH: 1010x330x50 mm Weight: 110 kg