Used Microfiltration Plant for sale (2,836)

Condition: as good as new (ex-display), Year of construction: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options at additional cost – see below Included: + Profile rotor for increased throughput performance We are happy to arrange a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarder and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 15 pieces, reversible multiple times Laedpfxsb Ny Eys An Uob Optional double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Automatic stop when rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-boosting incremental control of the hydraulic pusher - Pertinax guides for the hydraulic pusher - Vibration-damping machine feet - CE compliant Optional extras for the shredder (at additional cost): - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for over 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended for shredding veneer, paper or thin materials < 3 mm) - Angled conveyor belt + €8,770 net (angle adjustable 0–60°, discharge height approx. 2,000 mm) - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnetic block above the belt for manual cleaning + €990 net (for low metal contamination) - Control for conveyor and overbelt magnet + €2,750 net (start/stop synchronised with shredder); alternatively, manual start/stop for conveyors + €595 net Raw material requirements: - Moisture content (dry basis) must be below 30% - Installation temperature: temperature controlled room, at least +5°C - Metals and mineral contaminants such as sand, stones, etc., will increase wear

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation Lodeh S H T Uspfx An Ueab with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Lodpfxjd Db N Is An Ueab Knives: multiple reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Lasdpfx Answzarcj Ueb Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: like new (used), Atlas Copco / Scheugenpflug The entire system is unused and in like-new condition Model: VDS P6030 Automatic processing of a complete cycle from loading to unloading Mixing of two components (e.g., resin and hardener) directly in-process Precise application of material at defined positions on the workpiece Component handling via a 3-axis system (X, Y, Z) Operation in automatic, semi-automatic, and manual modes Technical data: Power supply: 400 V AC, 50/60 Hz Rated current: 13.6 A Power consumption: 8.5 kVA Fusing: 3 × 32 A Control voltage: 24 V DC Operating pressure: 6 bar Pressure monitoring: 4 bar Compressed air connection: 6 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP21 Foundation slope: max. 0.05% Clearance around machine: 0.8 m Clearance in front of control cabinet: 1.2 m Width: 1660 mm x Height: 2305 mm x Depth: 1315 mm Weight: 600 kg Sound pressure level: ≤ 70 dB(A) Model: A310 Technical data: Tank volume: 60 l resin and 20 l hardener Agitator in each tank Vacuum sensor for each tank Level sensors including overfill protection Suction valve per tank Sight glass with illumination Vacuum degassing directly in tank Material circulation to prevent sedimentation Optional tank heating Pneumatically driven piston pumps Delivery volume approx. 294 cm³ per stroke 1 or 2 pumps per tank possible Continuous dosing with dual pump system Pump variants: horizontal and vertical, suitable for highly viscous materials Vacuum generation via vacuum pump or ejector Oil separator to protect vacuum pump Control via SCP touch panel Operating modes: Automatic, pause, external control Material circulation during pause mode Possible integration to external control via interface Monitoring of production time, system availability, and material consumption Calculation of remaining material availability Power supply: 230 V or 400 V AC Operation outside EU with transformer possible Operating temperature: +5 °C to +40 °C With vacuum pump: +10 °C to +40 °C Humidity: 10 to 80 percent Protection class: IP20 Dimensions: Width 700 mm x Height 1950 mm x Depth approx. 1165 mm Weight: approx. 400 kg Model: LP804 Technical data: Application: Conveying and preparation of 1K and 2K dispensing materials (low to medium viscosity, also abrasive) Tanks have 50 and 20 liter capacity Control voltage: 24 V DC Power supply: per wiring diagram Rated current: per wiring diagram Power consumption: per wiring diagram Fusing: per wiring diagram Operating pressure: 6 bar Pressure monitoring: 4 bar Operating temperature: +10 °C to +40 °C Storage temperature: −20 °C to +60 °C Humidity: 10% to 85% (non-condensing) Control cabinet protection class: IP54 System protection class: IP20 Installation surface: max. 0.5% slope Clearance around system: 0.8 m Clearance in front of control cabinet: 1.2 m Dimensions: Width: 1500 mm x Height: 2050 mm x Depth: 770 mm Weight: 430 kg Noise level: ≤ 70 dB(A) Condition: unused Ljdjy Naf Espfx An Usab Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Condition: good (used), Asphalt plant central tower with screening unit, mixer, bucket elevators… Capacity: 160 tonnes/hour Laedpfx Anoy Hf Duj Ueb

Year of construction: 2015, operating hours: 44,309 h, condition: ready for operation (used), total width: 13,550 mm, total height: 7,510 mm, pressing force: 408 t, product length (max.): 18,000 mm, This FRIMO NFPP Thermoforming Plant was manufactured in 2015. It features a powerful HOP400 press with a force of 4000 kN and a press area of 2500 x 1800 mm. The plant dimensions are 18,000 mm in length, 13,550 mm in width, and 7,510 mm in height. If you are looking to get high-quality thermoforming capabilities, consider the FRIMO NFPP Thermoforming Plant we have for sale. Contact us for further details. • Application: Door panel FAT/FOT (Left Hand / Right Hand) • Connected Load: 692 kW • Rated Current: 1000 A • Voltage: 400 V AC / 24 V DC • Frequency: 50 Hz • Operating Pressure (Pneumatic): 5–7 bar • Air Consumption: < 300 l per cycle • Pneumatic Connection: G 1/2 • Pneumatic Air Quality: Dried / Un-oiled • Ambient Temperature Range: 15–40 °C • Relative Humidity: 20–70% (non-condensing) • Noise Level: < 82 dB • Main components included: Ljdpjy Rpk Hsfx An Usab • HOP400 Press: 4000 kN press force; 2500 x 1800 mm press area; approx. 79,000 kg • HOP300 Calibration Press: 3000 kN press force; 2100 x 1300 mm press area; approx. 24,000 kg • Feeding Table: 2400 x 1800 x 1100 mm • Hydraulic units for form and calibration presses • Tool change systems (Left and Right)

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Ljdpfx Ansy Au Aro Ueab Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Model - DM IP 176. Serial number - DM2100004. Date of manufacture - 2021. Lodpfx Asy Aicmen Usab Input height - 800mm. Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps.

Condition: used, Used plant for production of 99.5% technical glycerin from 80-85% crude glycerin using multi-stage distillation and rectification. Plant was commissioned in 2012. Technology and design are by Desmet Ballestra Oleo. Laedpjyw Tctjfx An Uob Main Sections of Equipment: - Thermostatized Water - Glyercine Distillation - Distillation Pitch Dilution Process description, equipment list and drawings available.

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, cooling capacity: 4 kW (5.44 HP), input voltage: 400 V, tank capacity: 100 l, total width: 640 mm, total length: 700 mm, total height: 1,250 mm, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, Sourdough – Rapid Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 – 100 kg total rye flour with timer Stainless steel construction Connection: 400V, 16A CEE plug Dimensions: 640 x 700 x 1250 mm Used machine, cleaned with warranty + spare parts service Options: Delivery service Laodpfx Anevdkt Ro Ueb Maintenance contract Service package Instruction & commissioning Many more bakery machines in stock!

Condition: good (used), Imer mixing plant Type: Mix 360 Bowl diameter: 90 cm Boiler height: 52 cm Ledpfoq Eh Huox An Ueab Electricity: 400 V

Condition: used, Water degassing (deareation) system for removing oxygen from drinking water, mainly built in 1995. The system operates using a two-stage cold degassing process involving counter-current stripping with CO₂ and consists of the following components: - 2 degassing vessels connected in series - Vacuum pump with separator - 70 hl holding tank (Gross, 2018) for storing degassed water at up to 4 bar overpressure. - Centrifugal pumps - CO2 dosing via needle valve - Pipe panel, various pipework, valves, fittings, measurement and control technology - Control cabinet with Simatic S5 control system Ljdpfx Aney Ti Anj Ueab Capacity: 20000 l/h Gross volume deareation vessels each: 285 l ; overpressure up to 1 bar Gross volume buffer tank: 7060 l ; overpressure up to 4 bar Residual oxygen content appr.: 0,010 - 0,015 mg/l Operation / Control: Simatic S5 Material: stainless steel Position: mounted on stainless steel frame with feet Features: 2 x degassing vessels; pressure tank; centrifugal pumps; vacuum pump with separator; CO₂ dosing (via needle valve); flow, pressure and level measurements; switch cabinet; pipe panel; various pipework, valves and fittings Additional title: cold degassing via CO2-Stripping

Condition: used, CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings Additional title: Cleaning system with 5 vessels Material: vessels from stainless steel Position: vessels standing on 3 feet each Base construction: flatconical vessels Ljdpfsy Tizwox An Ujab Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterfly valves; pipe panels various other valves, pipework and fittings

Condition: used, Year of construction: 2019, operating hours: 4,600 h, Internal vehicle number: G400104 German vehicle Available immediately at our yard in Kaufungen - Kassel More information: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform extensions AB 500-3 Continuously extendable from 2.55 to 5.00 m Extendable to up to 8 m with widening elements Financing example: * Internal number: Aswalt * Purchase price: 134,900.00 € * Down payment: 10% * Term: 60 * Monthly rate: 2,095.02 € Residual value: 25,380.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. Lasdpfx Asyxa Rajn Usb We would be happy to accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters Ljdpfsy Sam Usx An Usab - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Condition of the machine: The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 56,000 h, functionality: fully functional, type of input current: AC, power: 10,000 kW (13,596.20 HP), input voltage: 11,000 V, fuel: domestic gas H, Equipment: documentation/manual, 5 CHP units of 2 MW each with Caterpillar engine generator sets, each rated at 2.5 MVA, 10.5 kV generator output, operating hours range from 26,000 to 54,000. Fuel types: natural gas and methane. The units have been decommissioned and fully preserved by the operator. Each unit comes as a complete small building, including heat extraction systems. Full documentation and maintenance records are available. Site inspections can be arranged at short notice. Ljdpfjy R Ebbox An Ujab Available until late 2026 from Western Europe. The units are immediately ready for relocation, with dismantling to be carried out by the buyer. Asking price: €1,459,000 (USD 1,699,000) for all 5 units. The units will be sold as seen and must be relocated from the site by the buyer.

Year of construction: 2018, operating hours: 4,000 h, condition: like new (used), Lanner Vetamat SFT350/063-DS32 Chip Processing System with Push-Bottom Centrifuge 100% operational, low operating hours, excellent condition, currently still installed and can be inspected on site, immediately available Manufacturer: Lanner Anlagenbau GmbH Model / Type: Vetamat SFT350/063-DS32 Machine type: Chip processing system / chip centrifuge / chip de-oiling system Year of manufacture: 2017 Commissioned: 2018 Condition: Used Control system: Siemens S7 Country of origin: Germany Original value (according to info): €183,771 net Availability: Immediate, system needs to be dismantled at short notice Technical Data: System type: Lanner Vetamat SFT350/063-DS32 Centrifuge type: DS32 push-bottom centrifuge Conveyor: SFT350/063 hinge belt conveyor Chip crusher: Lanner S50GF Lifting and tipping device: MD-3 / Vetamat Lifting and tipping device capacity: max. 500 kg Infeed hopper: wear-resistant manganese steel Infeed hopper volume: approx. 280 liters Ljdpfx Ajy N Axusn Uoab Tank capacity: approx. 250 liters Max. centrifuge throughput (acc. to offer): approx. 375 l/h Motor power DS32 (acc. to datasheet): 5.0 kW Weight DS32 (acc. to datasheet): approx. 1,650 kg Dimensions DS32 (acc. to datasheet): approx. 4,230 x 1,320 x 2,290 mm Dimension D (acc. to datasheet): 750 mm Operating modes: Automatic and manual operation Documentation (acc. to offer): Operating instructions, circuit diagram, parts lists, project planning Throughput capacity by material (acc. to Lanner documentation): - Steel / Stainless: approx. 375 kg/h - Aluminum: approx. 125 kg/h - Cast iron: approx. 560 kg/h - Brass: approx. 280 kg/h - Grinding sludge: approx. 250 kg/h Actual throughput depends on material, chip shape, and coolant used. Equipment / Scope of Supply: - Lanner Vetamat chip processing system - DS32 push-bottom centrifuge - S50GF chip crusher - SFT350/063 hinge belt conveyor - MD-3 / Vetamat lifting and tipping unit - Hopper approx. 280 liters - Tank approx. 250 liters - Coolant separation box - Siemens S7 electrical cabinet - Hydraulic unit with hydraulic oil - Coarse material lock - Inspection hatches - "Hopper" cleaning unit - "Conveyor" cleaning unit - Pump with hose and dispensing gun - Sediment baskets with Ø 2 mm perforation - Drip tray - Level sensors - "Chip wagon present" sensor - "Chip wagon level" sensor - Float switch for external tank / oil drum full - Material preselection switch - Coolant selection switch - Operator console / control cabinet with indicator lights and controls Description: For sale is a used Lanner Vetamat SFT350/063-DS32 chip processing system, year 2017. The system is designed for processing metalworking chips. It reliably separates coolant or oil from metal chips, enabling efficient de-oiling and drying of the chips, and recovery of cutting fluid / oil. The system consists of a DS32 push-bottom centrifuge, an S50GF chip crusher, an SFT350/063 hinge belt conveyor, a lifting and tipping device, tank, coolant separation box and a Siemens S7 control system. According to documentation, the machine is suitable for short, free-flowing metal chips and metal sludge. The system is not suitable for bar ends, workpieces, scraps, waste, extremely long chips, stringy chips, or oversized coarse parts. The unit was commissioned in 2018 and is in flawless condition. The original stated purchase price was €183,771 net. Inspection possible by appointment. The system must be removed immediately due to new machinery investments.

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Year of construction: 2016, operating hours: 360 h, KIMERA SRL KM 0010 Small MULTIMIX / Concrete Mixer / Large Version • Manufacturer: KIMERA SRL • Model: KM 0010 Small MULTIMIX • Year of manufacture: 2016 • 360 operating hours • Maximum production output: 25 m³/h • Maximum batch size per cycle: 4 m³/h • Large configuration • Mobile concrete batching plant • Mobile complete system – ideal for transport by truck or trailer • Immediately ready for operation – no foundation required • Independent control unit with operator panel, USB port, start/stop/emergency stop Lajdpfx Aneyxqf Io Uob • Premium grid covers & conveyor technology for material loading and mixing process • Safe and robust construction for jobsite environments • Suitable for dry and wet mix production directly at the jobsite • Efficient & precise – saves material and time through inline dosing • Total weight: 1,400 kg • Length: 600 cm • Width: 300 cm • Height: 300 cm • German machine • Immediately operational • This offer is non-binding and subject to change. - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale subject to our General Terms and Conditions.

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Lsdpfjwcwbqsx An Usab

Condition: used, Year of construction: 2012, machine/vehicle number: DHT 05-15-3.6-08-07,5, Machine no.: 181174 Manufacturer: AGTOS Type: Continuous overhead conveyor blast machine Designation: DHT 05-15-3.6-08-07,5 Turbines: 8 turbines with 7.5 kW Extraction air volume: 7500 m³/h Lodpfjrq Hd Ssx An Uoab Year of construction: 2012 Other details: Characteristics of the installed filter system Residual dust content with secondary filter: ≤ 2 mg/Nm³ Type: Dry dedusting system Characteristics of the blasting system Blasting media (material and size): Steel abrasive Abrasive quantity (initial filling): 5 tons Workpiece material: Steel Max. Workpiece length: 1400 mm Passage width: 500 mm Passage height: 1500 mm Sound pressure level without sound insulation: ≤ 85 dB(A

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Lodpfxorq Hmzo An Ueab Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Technical specifications (per documentation): * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. Lsdpfxoyt H H Ns An Usab These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Year of construction: 2016, condition: ready for operation (used), A laminated glass cutting system is offered. Working range X/Y: 3700mm/2600mm, glass thickness: 3+3mm-10+10mm, operating principle: automatic cutting of laminated safety glass (LSG), separation system: infrared heating blade for PVB film, table surface: felt covering with air cushion function, bridge movement: synchronized for upper and lower side, positioning: automatic via CNC axes, control: CNC control. Equipped with hydraulic loading table (tilting table), mobile control panel, pneumatic breakout devices. Weight: approx. 5800kg, overall dimensions X/Y/Z: approx. 9500mm/4200mm/1600mm. Inspection possible by arrangement. Lajdpfxey Tn H Sj An Ujb

Condition: used, Year of construction: 2012, Automated system / Application area: Chrome plating, nickel plating, copper plating / Programs: Pre-cleaning, pre-treatment, metallization, post-treatment / Base materials: ABS and ABSPC / Technical data: Product window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Capacity: 20 carriers per hour, clear anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm in width, tank dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: transport system 133 kW, filters 194 kW, exhaust air 229 kW, wastewater treatment plant 150 kW, switching systems 704 kW, rectifiers approx. 3190 kW, heating energy approx. 1410 kW / Consisting of: automated loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths and exhaust system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating plant since 2015! Lasdpfxey Rvtue An Ueb