Used Mesutronic Metron 7.0 Ci Metal Detector for sale (36,728)

Condition: excellent (used), Year of construction: 2010, Metal cutting Tooling SMW AUTOBLOK - 210 BB MACH-ID 5208 Make: SMW AUTOBLOK Type: 210 BB Year: 2010 3 Chuck Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Djdpfxjzc Iq Us Adhjcn

Condition: excellent (used), Year of construction: 2009, Metal cutting Tooling SMW AUTOBLOK - W-325-S MACH-ID 5119 Dcodpfszc Ivqsx Adhsn Make: SMW AUTOBLOK Type: W-325-S Year: 2009 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. Dodpszl A Rasfx Adhecn The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Foot pedal for operation. Optional depth stop. Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Inspection and testing are possible and desirable after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6 Dsdpfszzff Sox Adhscn

Condition: used, Year of construction: 2000, machine/vehicle number: 121528, Item No. 26301 Technical specifications: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° up to round 130 mm - square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - mitre adjustable, left + right 0 - 90° - at 45° up to round 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Saw blade feed speed - steplessly adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydraulic material clamping device with hand crank for fine adjustment - Steplessly adjustable clamping pressure - 2 hydraulic backstops Dcedpfozzplisx Adhjn - Micro-spray coolant system - Original outfeed roller conveyor with stop 4000 mm - Infeed roller conveyor 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: Dcsdszzpp Iepfx Adhsn - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro-spray cooling system - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 Dcsdpfx Adjzmzhmshjn SERIAL: TEL-178600-558-98 Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Dcjdetmugcspfx Adhon Warranty: 2 years / 2 000 workhours

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, stainless steel framework, touch screen, self-learning system. - Specifications: weight of the product: max. 5kg; detecting speed: 0.2-0.8m/sec; detecting accuracy: FE from Ø 1.0mm, SUS from Ø 2.2mm; tunnel size WxH: 350x175mm; max. passing size WxH: 300x135mm; power: 220V/0.3kW, 50Hz/60Hz, dimensions and weight: L1545xW1114xH1383mm, 150/250kg. Dcedpfx Adev Nm E Tjhjn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg; detecting speed: 0.5m/sec; detecting accuracy: FE from Ø 1.5mm, SUS from Ø 2.5mm; tunnel size WxH: 450x250mm; max. passing size WxH: 410x210mm; power: 220V/0.45kW, 50Hz/60Hz; dimensions and weight: L1800xW800xH950mm, 180/280kg. Dsdpev Nm Hkefx Adhocn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Combination of Metal Detector and Weigh Checker. With two recect devices to check if product metallic impurities and/or meets target weight. - Specifications: stainless steel framework, weight range: 5-990g; detecting speed 0.2-0.75m/sec; detecting accuracy: FE from Ø 1.0mm, SUS from Ø 2.0mm; target weight accuracy: ± 0.5g; tunnel size WxH: 330x150mm; max. passing size WxH: 280x110mm; power: 220V/0.35kW, 50Hz/60Hz; dimensions and weight: L1700xW600xH900mm, 160/260kg. Dcedpfev Nm Hwex Adhon Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Dedpfxszv Rc Ss Adhecn Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Djdpfjzzvwrjx Adhocn Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45°

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 930 h, fuel type: diesel, maximum speed: 40 km/h, color: green, For Sale: Claas Arion 610 Hexashift Stage V (CIS) Agricultural Tractor, Type A96 100 Year of manufacture: 2022 Operating hours: 939 hours The tractor is in excellent, like-new condition, has seen very little use, is fully operational, and is ready to work with no additional investment required. It is powered by a 6-cylinder John Deere DPS 6.8 L engine compliant with Stage V emissions standards (SCR, DPF, DOC, AdBlue). Maximum power: 145 HP Rated power: 135 HP Homologated power: 139 HP Dcedpfozmv Twsx Adhen The tractor is equipped with a Hexashift 24/24 transmission (without creeper gears), featuring an electro-hydraulic shuttle and automatic powershift gear changes. Maximum speed is 40 km/h. It has 4WD, a differential lock, and a PROACTIV suspended front axle. The Load Sensing hydraulic system delivers 110 l/min and includes four rear hydraulic remotes (2 mechanical, 2 electro-hydraulic). Rear Category III three-point linkage and PTO speeds: 540 / 540 ECO / 1000 / 1000 ECO. The tractor does not have a front PTO. It is fitted with a Claas front linkage (front hitch) with a 3.0-ton lifting capacity and suspension. A reinforced loader frame is installed. The tractor comes with an ALO Quicke Q6M front loader featuring suspension, a quick coupler, Euro hitch, a bucket, and pallet forks. The cab is suspended and equipped with air conditioning, a pneumatic driver's seat, a CIS terminal with a color display, Bluetooth radio with hands-free function, and a full set of work lights. Standard roof (without sunroof). Tyres: Front: 480/70 R28 Mitas Rear: 580/70 R38 Mitas Both front and rear tyres are in very good condition. The tractor can be inspected and collected in Germany by prior appointment.

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm Dcodpfx Aeyyzxhodhsn - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 499 h, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Dsdpeyyz Txsfx Adhjcn Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Dcodpfehwrhfex Adhen Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Dcjdjhwrk Topfx Adhjn Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2026, condition: as good as new (ex-display), Spray Cleaning System - Parts Washing System - Djdpfx Adowitvqehocn NEW SYSTEM / Pilot Plant Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Useful height: 900 mm Max. loading weight: 600 kg Tank volume: 500 liters, spray pressure: 5 bar, 400 l/min. Heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304) and dip-pickled Including loading trolley in front of the system Included special equipment: - Steam extraction including condensate return - Automatic Water refill and level monitoring - Removable coarse filter in the return line to the wash tank - Removable basket surround - Preparation for retrofitting an oil separator - Weekly timer for heating - Electric spray pipe for optimized component cleaning - Inspection hatch in the tank area - Siemens S7 1200 control system with color touch panel, manufactured by Weintek Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Condition: good (used), Swivel bending machine, a press brake from the renowned manufacturer Schröder. Capacity: 3mm steel, aluminum, etc., and more. Working width: approximately 2.04m. Weight: approximately 2.4 tons. Easy to operate. Manual and foot controls. Optionally, a segmented upper beam or a back gauge is available. The machine comes from private use. Loading with a forklift is no problem. On-site testing is, of course, possible. You will receive an invoice according to §25a UStG – the VAT is included in the invoice amount. Subject to differential taxation. Optionally, a matching plate shear, 2m, 3mm, is available – a set price is also possible. Dodoz Ad Rvjpfx Adhecn Other equipment and tools for sheet metal processing are available.

Condition: new, functionality: fully functional, We offer a wide selection of high-quality industrial metal containers for use in manufacturing, warehouses, logistics, service workshops, and waste material handling facilities. Available options include: – metal containers for material storage, – mesh containers with good visibility of the contents, – designs with doors for easier access to the material, – tipping containers for scrap, waste, and production residues, – containers with an opening bottom for quick and efficient emptying. The containers are designed for demanding industrial use and allow for easy handling with a forklift or pallet truck. Depending on the design, various dimensions, capacities, load capacities, and additional equipment are available. They are suitable for: – storing raw materials, semi-finished products, and finished products, – collecting metal scrap and production residues, Dsdpezn Uluofx Adhocn – internal transport of materials, – organizing warehouse and production areas, – quick emptying of contents directly with a forklift. To request a quote, please let us know the desired type of container, dimensions, load capacity, quantity, and intended use. We will be happy to help you choose the appropriate design. Price and delivery time are available upon request.

Condition: used, Year of construction: 1991, machine/vehicle number: 15453 91, functionality: unexamined, Vertical metal bandsaw, Heska SB 4, manufactured in 1991. Machine no. 15453 91, band length 3,200 to 3,400 mm. Band welding device with shear on the stand, height-adjustable upper band guide with protection. Cutting data selector dial, work light, work table with groove profile. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee. Dsdpfx Ajz A Umxjdhscn

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 625RS10HWPp-D22092022, coil weight: 10,000 kg, feed rate X-axis: 35 m/min, number of straightening rollers: 5, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,250 mm, mandrel diameter: 508 mm, coil width: 1,250 mm, coil outer diameter: 1,250 mm, number of blades: 8, type of input current: three-phase, working width: 1,250 mm, total width: 4,500 mm, total length: 5,700 mm, total height: 1,600 mm, load capacity: 10,000 kg, product width (max.): 1,250 mm, space requirement width: 4,500 mm, space requirement length: 5,700 mm, space requirement height: 1,600 mm, Krasser Centurio SCS-1250 slitting line with a Stolarczyk 10-ton motorized uncoiler Dedpfxoz D Ivvo Adhocn For sale: a complete coil-fed sheet metal cutting and slitting line, manufactured by Krasser GmbH (Austria), installed new in January 2023 and used in-house ever since by a sheet metal processing company. Well-maintained, fully operational, and available for inspection while still running at our facility. Krasser Centurio SCS-1250 – slitting/cutting line Max. sheet/coil width: 1,250 mm — min. independent sheet width: 250 mm — min. slitting width: 75 mm between knives Material thickness range: steel (400 N/mm²) 0.4–1.5 mm, stainless steel (550 N/mm²) 0.4–1.0 mm, copper and aluminum 0.5–2 mm Max. cutting speed: 35 m/min Straightening unit: 5 rollers Longitudinal cutting: 6 pairs of slitting knives installed (5 standard + 1 additional pair), max. 8 Cross-cutting: electrically driven guillotine shear Roller-shear unit for partial cross-cuts included Automatic film-application (plastic protective film) unit included Automatic labeling unit included (label printer + applicator) Krasser Optimizer cutting-optimization software included Touchscreen HMI control, multilingual (including Spanish) CE-certified safety fencing Electrical connection: 3-phase 400–488V, 11 kW, 16A Pneumatic connection: 1/2", 6 bar, filtered and dried air, 50 l/min Approx. overall footprint (line + uncoiler): 5.7 m long x 4.5 m wide x 1.6 m high Lifetime production data (as of today): 176,941 m of material processed, 60,610 cross-cuts — machine has been in steady, reliable production use Stolarczyk uncoiling set (motorized, 10 tons) Manufacturer: Spółka Stolarczyk (Poland) — Type RS10HWPp-D, year 2022 Max. coil load: 10,000 kg (10 tons) Hydraulic mandrel expansion — mandrel/coil inner diameter 508–610 mm Max. coil outer diameter: 1,250 mm — coil width: 250–1,250 mm Max. unwinding speed: 30 m/min Coil car included, with hydraulic vertical lift (306 mm) and electric horizontal travel Electrical connection: 400V, 6.5 kW Weight: 3,150 kg The line and uncoiler are sold together as a working unit. Removal/dismantling and logistics to be agreed with the buyer. For technical questions or to arrange a visit, please contact us by email — we're glad to answer any question and share further documentation, photos, or a video of the machine running.

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 40 mm -Load capacity: 3200 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg/piece Djdpedkbf Hofx Adhocn

Condition: used, AUTOMATIC SHEET METAL BLANKING AND BENDING LINE – USED – CE CERTIFIED Brand: CIMSA – Made in Italy Material Specifications • Material: Fe P01 – galvanized – pre-painted • Thickness: 0.6 – 2 mm • Maximum dimensions: 1000 x 2000 mm Dodpfxexv Th Rj Adhocn Line Dimensions • Total length: 25 meters + robot • Maximum width: 6.8 meters Line Composition • Motorized decoiler model SMC 100 • Straightening unit model CR 1000 • Electronic feeder model AP3 1000 • Punching unit consisting of 13 cylinders and 18 punching groups controlled by CNC • Tool change device • Press 60 tons, width 1000 mm, 50 kW, complete with: - die insertion trolley - sheet metal support - scrap evacuation conveyor belt • Blade change system on the shearing station • Platform with piece translation and tilting system • Transfer station adjustable in width by handwheel • Flipping device for piece turnover • Longitudinal positive/negative bending station • End positive/negative bending station Automation: ABB robot for automatic piece unloading