Used Mann Filter Air Filter Housing for sale (34,726)

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times Dkjdpfezubtlox Aa Hst • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: used, Year of construction: 2024, functionality: fully functional, 3M Encapsulated System Holder 16EZB – Filter holder for production capsules Manufacturer: 3M Purification Inc. / 3M Separation and Purification Sciences Division Model: 3M™ Encapsulated System Holder 16EZB Year of manufacture: 2024 Location: Marburg, Germany Condition: Used, already in operation New price: approx. 78,000 USD Description: For sale is a high-quality 3M™ Encapsulated System Holder, type 16EZB, for use in biopharmaceutical production, pilot plants, or process development. The filter holder was specifically designed to accommodate 3M production capsules and is suitable for both upstream and downstream processes. The vertical process design ensures optimal media utilization. The system allows for quick capsule changes and reduces cleaning and validation efforts compared to conventional stainless steel filter housings. Technical features: Model: 16EZB Accommodates 1 to 7 multi-cell production capsules Robust stainless steel construction Vertical operating position for optimal media utilization Swivel design for easy loading and unloading Mobile system with industrial swivel casters Locking mechanism with two handles Suitable for pilot and production scale Maximum differential pressure load: 3.4 bar (50 psid) Materials: Frame: Stainless steel 304 End plates: Stainless steel 304 Guide rods: Stainless steel 316 Base: Stainless steel 304 Locking elements: Stainless steel 304 Rollers: Polyurethane on stainless steel construction Application areas: Biopharmaceutical production Cell culture harvest Monoclonal antibodies (mAb) Recombinant proteins Microbial filtration Downstream process steps Pilot and scale-up applications Advantages: No stainless steel filter housings required Reduced cleaning and validation efforts Quick capsule changes Low risk of contamination Space-saving design High process flexibility Scope of supply: 3M Encapsulated System Holder 16EZB Used, functional Further details and photos on request Inspection: Possible by appointment in Marburg. Price: Negotiable Contact: Further information, technical documents, and inspection appointments on request. Dodozbkr Eopfx Aa Hokt

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Dedpfx Aszwvb Aoa Hskt Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Year of construction: 2021, condition: as good as new (ex-display), NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD990 Type: ALM-RD990 incl. 2 x air filters Delivery quantity: 15,50 m³ / min * Compressed air connection 2 " Dimensions L x W x H: 948 x 728 x 1370 mm Dkodpsipm Aqsfx Aa Het Weight: 220 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2022, condition: as good as new (ex-display), NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD660 Type: ALM-RD660 incl. 2 x air filters Delivery quantity: 10.38 m³ / min * Compressed air connection 2 " Dimensions L x W x H: 678 x 648 x 1157 mm Weight: 165 kg Dedpfxoipm Huj Aa Hekt * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Year of construction: 2008, condition: ready for operation (used), Offered for sale is a Kern Kraft chamber filter press. Max. filtration capacity: 2000l/24h, number of filter plates: 10 standard, expandable to 20, filter area range: 3.9m²-8m², chamber volume: approx. 40l. Equipped with plates and cloths, pressure switch, stainless steel filter cake tray and stainless steel piping, expansion tank, check valve and automatic shutdown, pump and candle filter housing with filter cartridge and control cabinet. Dimensions X/Y/Z: 2500mm/1000mm/1800mm, weight: approx. 630kg. An on-site inspection is possible. Dksdoztzqnepfx Aa Hot

Year of construction: 2015, operating hours: 780 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: sn:CAI858663, ALUP Sonetto 15 500 Screw Compressor for Sale – Reliable Industrial Unit – TOTAL OPERATING HOURS: 780!!! For sale: ALUP Sonetto 15 500 screw compressor in good working condition, suitable for continuous industrial use. Key technical specifications: Power: 15 kW Air receiver: 500 liters Working pressure: 8–10 bar Air delivery: approx. 1.8–2.4 m³/min Type: tank-mounted screw compressor Cooling: air-cooled Control: integrated electronic controller Condition: Operating hours: 780 Regularly maintained / serviced Oil and filters: replaced at last service Currently operational / available for testing This compressor delivers reliable and stable performance, ideal for workshops, industrial applications, and automotive service environments. Additional information: Location: Gyor / Hungary Transport/shipping can be arranged if needed Price: 7,700 EUR (negotiable) For further information, feel free to contact by phone or message. Djdpsyzhmbjfx Aa Hjkt

Condition: used, ALKO clean air extraction unit, Power Unit 200P - used Air filtration using filter hoses, Cleaning performed pneumatically, Dust-tested, Mobile collection container ----- Technical data ----- Extraction nozzle diameter: 200 mm, Nominal air flow rate: 2,261 m³/h, Maximum negative pressure: 2,174 Pa, Dsdoy T Ebgopfx Aa Hekt Number of bags: 2, Motor: 3 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,300 x 850 x 2,050 mm, Weight: 470 kg

Year of construction: 2025, operating hours: 2,000 h, condition: like new (used), Complete, as-new Subitec LS180 photobioreactor lab system, built and commissioned in 2025 (07/2025), used only in a controlled laboratory environment. A ready-to-run, turn-key platform for microalgae cultivation and process development — not a bare reactor frame, but a full working package: reactor, high-power lighting, gas management, cooling and a modern B&R automation system with touchscreen and secure remote access, all in one compact unit. At its core is a 180 L Flat-Panel Airlift (FPA) reactor in transparent PVC. Internal static mixers and downcomer geometry create gentle, continuous circulation between lit and shaded zones for optimal growth — without any mechanical stirring. Highlights: Superior, proven performance: in-house cultivation has reached growth rates above 5 g/L/day and densities up to 14 g/L with Chlorella vulgaris. Powerful lighting, high-efficiency light path: double-sided dimmable LED (~4,080 W, full 400-780 nm spectrum), ideal for high-density cultivation and for studying versatile light regimes. Easy to run and keep clean: low-shear airlift circulation, transparent panel with no gradual film build-up, intuitive touchscreen operation. Compact footprint vs. bulky tubular systems (approx. 2.6 x 0.8 x 3.2 m). Tailor-made beyond the standard Subitec design: automatic CO2 dosing via a Bürkert control valve and real-time concentration measurement of the outgoing (off-gas) CO2 for carbon-uptake monitoring. Data-ready automation: all key process variables (pH, temperature, CO2 dosing and off-gas uptake) continuously logged on an open B&R platform. Technical data: Reactor: Flat-Panel Airlift (FPA), 180 L, transparent PVC; aluminium frame Dimensions (L x W x H): approx. 2.6 x 0.8 x 3.2 m Year built / commissioned: 2025 / 07/2025 — as-new Temperature range: 5-30 °C; noise < 70 dB(A) Lighting: LED, double-sided, ~4,080 W, 400-780 nm, max. 500 µmol/m²/s per panel, dimmable Automation: B&R X20 PLC (X20CP1685 / X20EM1612), 4 GB eMMC, Profinet, full I/O set HMI: B&R Power Panel T80 12.1" touchscreen Remote access: Tosibox Lock 670 secure router CO2 dosing: Bürkert 8741 mass flow controller (0-10 Nl/min, Modbus TCP), pH-based PID control Dedpozluymjfx Aa Hekt CO2 off-gas: Norsk Analyse GD10P NDIR analyser (0-100 vol-%, CH4-immune) Cooling: two reactor-integrated heat exchangers + dedicated chiller Control cabinet: Rittal (800 x 1200 x 300 mm); Hager main switch, 3-phase RCD & breakers Supply: 3 x 230 VAC / N / PE, 16 A; 24 VDC control Scope of delivery (single working package): 180 L FPA reactor in aluminium frame; double-sided dimmable LED lighting; gas-mixing unit and filtered (0.2 µm) gas supply; Bürkert CO2 mass flow controller; Norsk Analyse off-gas analyser; chiller and integrated cooling; periphery (media/harvest lines, filters, sampling unit); exhaust unit (foam trap + air lock); Rittal cabinet with B&R automation and 12" touchscreen; Tosibox remote access; temperature and pH sensors. Support: operator training included (remote, or on-site by agreement). We can also advise on the best use of Chlorella strains, recommend species that perform well in this reactor, and share relevant cultivation data. Location: Lahti, Finland — viewing by appointment. Price and delivery terms by agreement.

Year of construction: 2009, condition: used, functionality: unexamined, Used Labopur mobile air filtration cabinet Manufacturer: Labopur Trionyx Model: NF X 15-211 Voltage: 220-240V (50Hz) Dimensions: 72cm x 82cm x 179cm (LxWxH) Worktop height: 86cm Dedpfx Aaey Nzryj Hskt Equipped with H401 filter

Condition: excellent (used), ALKO 200 clean air extraction unit with frequency converter – used Air filtration using filter hoses, Pneumatic cleaning system, Dust-tested, Movable collection container, Frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Extraction nozzle diameter: 200 mm, Nominal volume flow: 2,261 m³/h, Max. negative pressure: 2,446 Pa, Number of filter bags: 2, Motor: 4 kW, Compressed air connection: Max. 8.5 bar, Dimensions (L x W x H): 2,280 x 1,010 x 2,050 mm, Dkjdpfx Aaozg A N Eo Hjt Weight: 470 kg Quality information: - Complete basic inspection - Complete basic cleaning - Pneumatic system checked - Ready for immediate use

Condition: used, functionality: fully functional, total width: 3,000 mm, total length: 1,800 mm, total height: 6,000 mm, Bag filter Dkjdpfx Aajzy R She Het Dimensions: 3000 x 1800 x H 6000 Air flow rate m³/h: 10,000/13,000 No. 108 bag filters, L. 3000 Filtration area m²: 120 No. 02 explosion-proof ventilation panels No. 01 motorized screw conveyor No. 01 star valve Ladder Excluded: - Fan - Electrical control panel - Piping in general

Condition: used, This listing is for TSI Alnor LCA501 Air Velocity Meter. The unit is in full working condition and ready for immediate use. We currently have several of these units aavailable This high-performance handheld rotating vane anemometer precisely measures wind speed, temperature, and volume flow, making it ideal for monitoring laboratory fume hoods and HVAC systems. Transparency Report and Technical Audit: • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Dksdpfezau T Dex Aa Hst Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Dksdpfxjzu Aibj Aa Hot Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2025, condition: like new (used), VeloBlade DF0906-MT Automatic Digital Cutting System – As New We are offering this VeloBlade DF0906-MT automatic digital flatbed cutting system in as-new condition. Manufactured in March 2025, the machine provides a generous 900 × 600 mm active cutting area and is designed for the efficient production of packaging, point-of-sale materials, labels, stickers, business cards, invitations, prototypes and other short-run digitally finished products. The automatic sheet-feeding system, conveyor cutting bed, vacuum material hold-down and camera registration system allow jobs to be processed accurately with minimal operator intervention. Depending on the tooling fitted, the machine can be used for cutting, kiss-cutting, creasing, perforating and processing a wide range of flexible and rigid substrates. This makes the VeloBlade DF0906-MT particularly suitable for commercial printers, packaging producers, sign makers and businesses looking to bring short-run digital cutting and finishing in-house without the cost or lead time associated with conventional cutting dies. ### Machine specification * Manufacturer:VeloBlade * Model: DF0906-MT * Year of manufacture: 2025 * Production date: March 2025 * Active cutting area: 900 × 600 mm * Voltage: 220 V * Frequency: 50 Hz * Power: 4.85 kW * Required air pressure: 0.5–0.8 MPa * Overall dimensions: 2,620 × 1,380 × 1,480 mm * Gross weight: 467 kg Dkedpfjznma Dex Aa Hst * Serial number: DF251003S008A140 * Condition: As new A versatile and highly productive digital finishing system, ideal for automated short-run and on-demand production. Please contact us for further information, additional photographs, videos, pricing or to arrange an inspection.

Condition: used, Year of construction: 2015, CNC laser cutting system, fiber laser 3kW Manufacturer: Microstep Type: FIBERLAS MSF 4001.20BL Year of manufacture: 2015 With drilling unit + tool changer Complete system consisting of: - Cutting system, - IPG fiber laser source, - HIGHYAG cutting head, and - KEMPER extraction system. Laser IPG Ytterbium Laser System YLS-3000-CUT-Y14 Rated power: 3,000 W (3kW) Operating mode: CW / modulated Power consumption: approx. 9 kW max. (8.3 kW typical) at 3,000 W Cooling: IPG air-water chiller Operating hours: approx. 26,819 h Dimensions: W/D/H: 1,004 x 804 x 556 mm Cutting head II-VI HIGHYAG BIMO-FSC Permissible laser power: up to 4 kW Focal length f: 150 mm (focusing module 1.5) Dsdozhtp Ejpfx Aa Hjkt Focus diameter: approx. 300 µm at 200 µm optical fiber Weight: approx. 6.2 kg Extraction system KEMPER SYSTEM 8000 Extraction capacity: 5,000 m³/h Filter area: 50 m² Filter: KEMPER KemTex ePTFE membrane filter Testing: IFA-tested, welding fume class W3 (high-alloy steels) Availability from 10/2026 Reference no.: C2177 9926ä

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. Dodjzvh Dyopfx Aa Hskt • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: new, dimensions: innen 1160 x 870 x 850 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 150 kg total power requirement 1,2 kW weight 160 kg range L-W-H 1320 x 1200 x 1760 mm Furnishing: - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter Dodpfx Aexabugsa Hokt - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Condition: ready for operation (used), Year of construction: 2019, Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Dkedpeyvuvlofx Aa Het

Condition: new, Year of construction: 2026, functionality: fully functional, Industrial filtration unit with FI450 filter cartridges – 12,000 m³/h Industrial filtration unit with filter cartridges, model FI450. The system operates under negative pressure and is designed for efficient dust extraction and filtration in demanding industrial environments. The unit is equipped with 35 filter cartridges made of antistatic polyester and an automatic cleaning system with counter-flow compressed air blowing, which ensures efficient cartridge cleaning and reliable continuous operation. Main technical features: Model: FI450 Airflow: 12,000 m³/h Operation under negative pressure Suitable for outdoor installation Design in accordance with EN 16770 standard Dkedjzlrr Tepfx Aa Hot 35 filter cartridges made of antistatic polyester Cartridge dimensions: Ø 144 × 1,220 mm Total filtration area: 157 m² Filter material weight: 270 g/m² Cleaning system with counter-flow compressed air blowing Air inlet diameter: Ø 450 mm Pressure: 280 mm H₂O Noise level: 75 dB(A) The unit is equipped with: A settling chamber to reduce air velocity at the filter inlet and prevent damage to the filter cartridges from larger particles or sparks, thereby extending their service life A backflow damper to prevent dust from returning to the production area An automatic powder extinguishing system Three dust collection containers, each with a nominal capacity of 180 liters One high-performance fan, designed for operation with clean air A premium-grade S1 electric motor, IP55 protection, with a power of 15 kW A control cabinet with a connection for automatic start and stop Technical data: Dimensions: 3,500 × 1,100 × 2,440 mm Weight: 1,670 kg Installed power: 15 kW Electrical supply: 400 V / 50 Hz Dust collection: 3 containers of 180 liters each Number of filter cartridges: 35 Filtration area: 157 m² Airflow: 12,000 m³/h Air inlet diameter: 450 mm Price: 19,210.00 EUR For additional information on availability, delivery terms and technical documentation, please contact us.

Condition: ready for operation (used), Year of construction: 2020, Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible. Dkodexl Upbopfx Aa Hjt

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Dksdpfezizpcjx Aa Hjt Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Dksdpfx Aozlzv Isa Hst Stock number: 1148

Condition: used, machine/vehicle number: 10E5T60-1001, KEB Automation EMC Filter, part no. 10E5T60-1001, is an advanced passive component from the COMBILINE series, designed to eliminate high-frequency electromagnetic interference in drive systems. The device is specifically dedicated for use with KEB COMBIVERT F5 series inverters (housing sizes F4 and F5). Technical Specification: - Rated Voltage (UL): 480V AC - Max. Input Voltage: 3-phase, up to 528V AC - Rated Current (UL): 6.7 A - Rated Current (nominal): 8.0 A - Mains Frequency: 50/60 Hz - Number of Phases: 3 phases + PE Dkjdey Dqbmopfx Aa Het - Operating Temperature Range: up to 45°C (Class 3K3) - Protection Degree: IP20 Key Functions and Application: - Interference Suppression: The filter effectively blocks conducted radio frequency interference (RFI/EMI) in the range of 150 kHz to 30 MHz. - Mains and Device Protection: Prevents harmonics generated by high-speed IGBT switching in inverters from entering the power grid, protecting sensitive electronic equipment. - Standard Compliance: Helps meet EMC requirements according to EN 61800-3 for categories C1 and C2. - Mounting: Designed for control cabinet installation, often on a 35 mm DIN rail.

Condition: used, This listing is for the Restek Single Position Base Plate Gas Filter Kit + SGT Gas Filter Kit The unit is in full working condition and is ready for immediate use The Restek Single Position Base Plate Gas Filter Kit is a modular system designed for gas purification in laboratory applications, particularly in gas chromatography (GC) and mass spectrometry (MS) systems. Key Features Dkodpfexv Dk Njx Aa Het Baseplate Design: The single-position baseplate (catalogue number 22025) is constructed from brass and measures 10.2 × 10.2 × 4.8 cm. It is compatible with all standalone Super Clean gas filters Filter Cartridges: Restek offers various filter cartridges, such as the triple filter that removes oxygen, moisture, and hydrocarbon impurities, and the fuel gas filter designed for moisture and hydrocarbon removal. Fitting Compatibility: The baseplate accepts 1/8" tubing. To adapt to 1/4" tubing, 1/8" to 1/4" tube end reducers are available. Material Options: End fittings are available in brass or stainless steel, allowing for customization based on application requirements Restek SGT Superclean Gas Filter Kit The Restek SGT Superclean Gas Filter Kit is a high-purity gas purification system designed to remove contaminants such as moisture, oxygen, and hydrocarbons from carrier and fuel gases used in gas chromatography (GC) and mass spectrometry (MS). This kit is particularly beneficial for applications requiring ultra-pure gas supplies to ensure accurate and reliable analytical results. Key Features High-Purity Output: Delivers gas purity levels exceeding 99.9999%, depending on the incoming gas quality and flow rate. Versatile Compatibility: Compatible with various gas types, including inert carrier gases, air, hydrogen, and helium. Quick-Connect Design: Features a user-friendly quick-connect system for easy and leak-free filter cartridge changes. Durable Construction: Constructed with a glass interior to prevent diffusion and a polycarbonate exterior for safety. Visual Indicator: Each filter cartridge includes an easy-to-read color change indicator to signal when replacement is necessary.