Used Klingel Bsa 50 for sale (33,117)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Nodey R Npcepfx Amnect Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, Metal cutting Tooling TOS - HUR 50 MACH-ID 2923 Make: TOS Type: HUR 50 Nedpfxewvht Rs Amnoct Year: 2015

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Ncsdpfev Dia Aox Amnet Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Ncsdpfsyrdplex Amnet Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Ncedpfx Aeyub Spomnst Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Ncjdpfxox Sx D So Amnot Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1989, Universal head (U-25) Coolant system Hydraulic tool clamping X-Axis: 5000mm Y-Axis: 1200mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Table load: 7000 Power on spindle:19kW Spindle speeds: 14 - 2500Rpm Spindle Taper: 50ISO/Bt/Mk Ncsdpswq Rkusfx Amnjt Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:7000mm/min. Length: 11225mm Width: 4100mm Height: 3200mm Weight: 19000kg

Condition: used, - Brand: VMI - Model: Phébus 2172 SEW - Machine No.: 147599 - Flour capacity: 50 kg Nedpfx Aoy Spa Remnjct - Dough capacity: 80 kg - Bowl capacity: 170 L - Voltage: 400 V - Current: 24.3 A - Power: 7 kW - Capacity: 50 kg - Bowl: fixed - Bowl volume: 170 L - 1 timer - 2 speeds - Safety: thermal protection - Head safety: integrated protection - Chassis: tubular frame with stainless steel feet - Casing: ABS-PMMA - Lid: liftable by lever - Head: liftable by lever - Start: progressive tool start-up

Condition: new, HOERBIGER MSV322BE06P Id-No.: HV03115 50/11 B4 directional seat valve, unused in original packaging, 100% functional, delivery as shown in the photos. Nsdpfxoy Srpnj Amnoct

Condition: used, power: 155 kW (210.74 HP), fuel type: diesel, color: yellow, mast type: duplex, Year of construction: 2018, operating hours: 11,999 h, Year of manufacture: 2018 Drive: Wheeled Number of cylinders: 4 GVW: 46,000 kg Body manufacturer: LIEBHERR LH 50 LITRONIC CE marking: yes LIEBHERR LH 50 M LITRONIC MATERIAL HANDLER Ncjdpfx Amey T Rdgsnot YEAR 2018 TOTAL WEIGHT 46,000 KG REACH 20.0M CE MACHINE ENGINE D934 A7-04 POWER 155KW / 210 HP WHEELBASE CM GROUND CLEARANCE CM WIDTH OF THE UNDERCARRIAGE CM 4-POINT OUTRIGGERS HYDRAULICALLY RAISABLE CABIN 3RD AND 4TH HYDRAULIC LINE INDUSTRIAL STRAIGHT MONOBOOM Z INDUSTRIAL STICK, STICK END WITH ANGLE 5-TINE GRAB MULTI-TINE GRAB CAPACITY 1.10-1.70M3 CRANE IS READY FOR WORK WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, mileage: 263,889 km, power: 130 kW (176.75 HP), first registration: 12/2018, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 4,490 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 2, total length: 6,950 mm, total width: 1,990 mm, total height: 2,650 mm, loading space length: 3,970 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2018, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - LED lamp Ncsdpfx Amjymlbfjnet - Manual - Radio/cassette - Reversing camera - Lane keeping assist - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, twin tires, unladen weight: 2524 kg, gross vehicle weight: 3500 kg, trailer coupling, cabin type: single cab, cruise control, air conditioning, number of airbags: 2, parking assistance: front and rear, electric windows, electric mirrors, partition, radio/cassette, Carplay, GPS navigation, color: white, maintenance manual, heated mirrors, reversing camera, lighting type: LED lamp, lane keeping assist, air conditioning, seat heating, Bluetooth, blind spot sensor, engine power: 130 kW (174 hp), fuel: diesel, Euro: 6, drive technology: timing belt, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, side panel lined, rear step, roof rack: none, side doors: 1, rear closure: double door, central locking, number of seats: 2, seat arrangement: 1+1, seat cover: fabric, seat adjustment: manual, L4H3, twin tires, air conditioning, navigation, parking distance control, LED, trailer hitch, spare wheel, tire type: summer tires = Further Information = General Information Number of doors: 1 License plate: V-78-PNL Axle Configuration Tire size: 205/75R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 5 mm; Suspension: Coil spring suspension Axle 2: Twin tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 5 mm; Tire tread depth right outside: 5 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,524 kg Payload: 976 kg GVW: 3,500 kg Functional Loading area height: 65 cm Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 2 Financial Information Leasing price: €257 per month (delivery van, 72 months); Please inquire for more information and terms.

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data Manufacturer: Kisters Maschinenbau GmbH Model: Wrap Around Packer 420/50 Machine Type: Wrap-around packer / secondary packaging machine Year of Manufacture: 2001 Capacity: up to approx. 50,000 bottles/hour Operating Hours: 16,976 h Application: Packaging of PET one-way bottles Previous Use: PET one-way beverage line Current Status: Taken out of operation due to line reconfiguration Bottle Formats: 0.33 l, 0.355 l, 0.5 l Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 inkl. shrink application for trays  Listed Formats: 0.33 l LNB 2x12 tray 0.355 l LN 2x12 tray 0.33 l LNB 4x6 tray 0.355 l KN 4x6 tray 0.33 l LNB 3x8 tray 0.355 l LN 3x8 tray 0.5 l LN 4x6 tray 0.5 l LN 6x4 tray 0.5 l LN 4x6 KLW full carton 0.33 l LN 4x6 loose wrap-around 0.33 l LNB 4x6 90° tray 0.355 l LN 4x6 90° tray 0.33 l BA 4x6 loose wrap-around 0.33 l BA 3x4 loose wrap-around 0.33 l Miller 4x6 loose wrap-around 0.33 l Salitos 4x6 loose wrap-around 0.33 l Vichy 4x6 tray cluster 0.33 l LN 4x6 tray cluster 0.33 l LN LCE 4x6 full carton 0.33 l EW 4x6 export full carton 0.33 l EW 4x6 export tray 0.5 l EW 4x5 loose wrap-around Ncjdpsy Sidvjfx Amnot

Condition: used, mileage: 34,333 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,640 mm, first registration: 08/2019, fuel tank capacity: 75 l, CO₂ emissions: 228 g/km, emission class: euro6, color: white, number of seats: 3, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, parking sensors, seat heater, sliding door, trailer coupling, = Additional options and accessories = - Rear parking sensors - Front parking sensors - Sliding door on the right side - Automatic headlights - Heated exterior mirrors - Heated windshield washer system - Passenger airbag - Bluetooth - Electric front windows - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Hill-hold control - Wooden cargo bed - Collision mitigation by braking - Comfort seats - Leather steering wheel - Lumbar support - Multifunctional steering wheel - Multimedia capable - Radio - Rain sensor - Rearview camera - Seat heating - Lane keeping assist - Start/stop system - Immobilizer - System to prevent secondary collisions - Tachograph - Insulated glass - Twin tires - Partition = Additional information = General information Number of doors: 5 Model range: March 2018 - Dec. 2019 Cab: single Technical information Torque: 410 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Transmission: 8 gears, automatic Top speed: 162 km/h Dimensions Length/height: L3H3 Dimensions (L x W x H): 615 x 207 x 312 cm Weights Unladen weight: 2,379 kg Payload: 1,121 kg GVW: 3,500 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 8.7 l/100km Maintenance, history and condition Service booklets: Available APK (technical inspection): valid until 08.2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL Ncjdpfx Aey T H H Rjmnst

Condition: used, functionality: fully functional, machine/vehicle number: 516329B00051, Year of construction: 2011, operating hours: 5,347 h, load capacity: 5,000 kg, lifting height: 4,670 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,330 mm, fork carriage width: 1,300 mm, fork length: 1,600 mm, empty load weight: 9,080 kg, total length: 2,700 mm, drive type: Elektro, construction width: 1,400 mm, Electric four-wheel forklift Chassis number: 516329B00051 Load center: 500 Ncjdpfxoy Scrts Amnet Fork width: 130 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 28x12.5-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 21x8-9 Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 930Ah Battery year of manufacture: 2016 Battery condition: 60 - 80% Side shifter, 3rd valve, 4th valve, front work light, partial cabin, windshield wiper

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 50 mm throat 350 mm bore stroke 180 mm thread capacity 35 M spindle taper MT 4 MK column diameter 150 mm Nodpfx Aewp Tnmjmnsct bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 50 mm throat 350 mm bore stroke 180 mm thread capacity 35 M spindle taper MT 4 MK column diameter 150 mm bore spindle turning speed range 93-1420 U/min Ncedpfx Aowp Tn Tjmnjt table-size 480x480 mm

Condition: new, Year of construction: 2023, 50 mm 1250 mm 1345 - MK 5 bore depth 270 mm Ncedpfx Aowp S U Somnjt spindle turning speed range 56-1450 U/min

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 50 mm throat 350 mm bore stroke 180 mm thread capacity 35 M Nedjygm Sxjpfx Amnsct spindle taper MT 4 MK column diameter 150 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW Nedpjb A Ncrefx Amnoct -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Njdpfx Amohhuf Hsnect Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: used, mileage: 893,000 km, power: 368 kW (500.34 HP), first registration: 06/2022, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,990 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, soot filter, tail-lift, Information in English: SCANIA 500S 6X2 CARRIER TRS ICELAND 815 x 250 x 275 CM INTERNAL TAIL LIFT Box: Refrigerated / Freezer / Flower Frigo Martini Ebo Rhoon 2022 Tail lift: 2,000 kg Dhollandia Refrigeration: TRS Carrier Iceland, temperature range from -25°C to +30°C First registration: 06/2022 APK (MOT): 06/2026 Mileage: 893,000 km Engine Power: 358 kW (500 HP) Transmission: Automatic Internal dimensions (L x W x H): 815 x 250 x 275 cm Kerb weight: 13,765 kg Payload: 14,235 kg GVW: 28,000 kg GCW: 50,000 kg Colour: White, original paint Suspension: Front leaf springs, axles 2 and 3 with air suspension Emission standard: Euro 6 Axle configuration: 6x2 Tyres front: 385/65 R22.5 L50% R50% Tyres axle 2: 295/80 R22.5 L50% R50% Tyres axle 3: 385/65 R22.5 L50% R50% Cab type: S Highline Features: RETARDER, automatic transmission, parking heater, refrigeration, adaptive cruise control, 2 beds, radio/CD player, TRS Carrier Iceland fridge with temperature control between -30°C and +30°C, 1,490-litre diesel tank, fully insulated body built in 2022, 5 stainless steel load lock rails integrated into floor and ceiling including 5 bars, 1 horizontal load lock rail, extensive extra lighting, fully pneumatic Rockinger trailer coupling, lifting axle, ABS, EBS, complete service history, direct from first owner, immediately available, ready for operation, box volume suitable for 26 CC (Danish trolleys), 16 standard pallets or 20 Euro pallets, etc. Optionally available with matching trailer: 2-AXLE DRACO FRIGO TRAILER CARRIER TRS ICELAND 24 CC TAIL LIFT (2021) Box: Refrigerated / Freezer / Flower Frigo Martini Ebo Rhoon Chassis: Draco MZS 218 Refrigeration: Carrier TRS Iceland First registration: - APK (MOT): until 2026 FRC ATP: No Internal dimensions (L x W x H): 750 x 250 x 290 cm Adjustable drawbar length: 40 cm Unladen weight: 6,040 kg Payload: 11,960 kg GVW: 18,000 kg Tail lift: Dhollandia 2,000 kg Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre profile axle 1: L40% R40% Tyre profile axle 2: L40% R40% Spare wheel: trailer 445/45 30% Features: Length-adjustable drawbar (40 cm), Carrier TRS Iceland refrigeration, Dhollandia 2,000 kg tail lift, ABS, EBS, SAF disc brake axles, 2 toolboxes, fully insulated body by Martini, 5 stainless steel load lock rails in floor and ceiling, 1 horizontal load lock rail, rear doors, rear bumper, ferry connections, 2 spare wheels, complete service history, immediately available and ready for use, box size allows for 24 CC (Danish trolleys), 14 standard pallets or 18 Euro pallets, etc. TOP CONDITION COMBINATION, IMMEDIATELY READY FOR WORK 3 SCANIAS AND 2 DAFS READY FOR DELIVERY ADDITIONAL TRAILERS AVAILABLE, ALL TO ABOVE SPECIFICATIONS, ONLY DIFFERENT MODEL YEARS: - 2017 - 2018 - 2019 - 2020 - 2021 - 2022 PLEASE CONTACT OUR SALES DEPARTMENT FOR MORE DETAILS Further information: Nsdpfx Asyqivujmnoct * Payload: 14,235 kg * Tyre size | First axle: 385/65 R22.5 * Tyre tread depth inner left | First axle: 50% * Tyre tread depth inner right | First axle: 50% * Max axle load | First axle: 9,000 kg * Tyre size | Second axle: 295/80 R22.5 * Tyre size | Third axle: 385/65 R22.5 * Tyre tread depth outer left | Second axle: 50% * Tyre tread depth inner left | Second axle: 50% * Tyre tread depth inner left | Third axle: 50% * Tyre tread depth outer right | Second axle: 50%

Condition: used, mileage: 240,000 km, power: 80 kW (108.77 HP), first registration: 05/2016, fuel type: diesel, overall weight: 5,000 kg, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: air conditioning, navigation system, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales advisor. Attention!!! Preferred sale to business customers only Internal ID Number: [3208] ----Optional add-ons: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emissions test * Nationwide delivery * Financing possible with or without down payment ----Vehicle highlights: * Regularly serviced * German vehicle * One previous owner * Immediately operational * Euro 5 standard * High roof, long wheelbase panel van * Cruise control * Air conditioning * Bluetooth multimedia function * Rear-view camera * Tow bar = 3,500 kg towing capacity Special equipment: Driver/passenger airbag, audio navigation system RNS 6000 (front speakers), electrically adjustable and heated exterior mirrors, wooden flooring in cargo area, suspension package B, lockable glove compartment, adjustable steering column (steering wheel), passenger double seat in cabin, high wood interior trim in load/passenger area, lashing rails in cargo area - on floor, side wall, and roof frame Additional equipment: Storage tray/compartment above windshield, driver airbag, traction control system (ASR), rear entry handle on right rear post, driver assistance system: brake assist (HBA), digital tachograph, windshield with sun strip at top, rear wing doors without glazing, driver's cab interior lights: 2 reading lamps in front, body/variant: high standard panel van, high-roof variant, fuel tank: 75 liters, full-height partition in cargo area without window, model update, engine: 2.0 l – 80 kW TDI, parking light switch, wheelbase 3,665 mm, tire repair kit, low emission as per Euro 5 standard, right-side sliding door for cargo/passenger area, upholstery: fabric, driver's cab seats: adjustable driver's seat, gross vehicle weight 5.00 t, additional brake light ----Interested in leasing or financing? We offer attractive options – even without down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm Nsdpfx Ajyr U U Ejmnsct ----Notice: All details online are non-binding and serve solely as general vehicle descriptions. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is determined exclusively by the purchase contract signed on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: excellent (used), Year of construction: 2016, Equipment / Additional information: Njdpfjy Ukp Sjx Amnjct new tool for perforating

Condition: used, empty load weight: 3,180 kg, maximum load weight: 6,820 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/2011, loading space length: 5,070 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 3-sided tipper, 500 mm drop sides, 4 x 3 t lashing eyes, loading height approx. 950 mm, , Surcharge for aluminum ramps, Price: 600 Euro, , Vehicle is sold on behalf of the customer , , -- Misprints, errors and modifications excepted, sample pictures --, More data under: !, More Details: ! Njdpfx Aoy Uan Domnsct

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 9,856 h, load capacity: 5,000 kg, lifting height: 6,800 mm, free lift: 1,960 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, DGUV certified until: 05/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, air conditioning, cabin, full service history, lighting, seat heater, sideshift, Linde H 50 D Evo Diesel Forklift with the following specifications: Lifting capacity: 5,000 kg Lifting height: 6,800 mm Overall height: 3,200 mm Year of manufacture: 2021 Operating hours: 9,856 Fully equipped Linde 5.0-ton diesel forklift with full cabin and heating, air conditioning, 4-cylinder engine, new front and rear tires (to be installed), triplex mast with full free lift, mini-levers, side shifter, 4th valve, two-pedal control, fork length 1,200mm Including 1,000-hour service according to LINDE manufacturer specifications (with new timing belt and new water pump) and valid UVV inspection. Additional attachments such as fork positioners, rotators, etc., or other fork lengths available upon request. Viewing, demonstration, and test drive available by appointment by phone. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). Nedpfjy Rh Ecox Amnoct For more information and offers, please visit our website.