Used Keb 07.F5 Cbb Ya50 for sale (3,552)

Condition: ready for operation (used), Heidenhain UV 130 ID 324 998-01 SN:7840727D – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In this case, an additional charge of €400, including VAT, will be applied. Lrjdpoz Hib Sofx Abysu Attention: You are bidding on a Heidenhain UV 130 ID 324 998-01 SN:7840727D inverter for exchange (exchange service). It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400, including VAT, will be issued.

Condition: excellent (used), functionality: fully functional, Pamasol Single Stage Filler Lrsdpfxsznw Ais Abyju Type: 2079 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: ready for operation (used), Rexroth -EN2-L2-S-NN-FW control board R911329920, serial number 7260402207736, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfx Aboz Aadljyjru

Condition: ready for operation (used), Fanuc A06B-6079-H105 module, serial number EA8305851, has been professionally and completely refurbished and tested, and comes with a 12-month warranty. It is 100% functional. Scope of delivery as shown in the photos. Lrjdpjz R Iiwjfx Abyeu

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516342V00017, Year of construction: 2019, operating hours: 13,119 h, load capacity: 7,000 kg, lifting height: 3,520 mm, fuel type: electric, mast type: duplex, fork length: 2,400 mm, TECHNICAL DETAILS Lifting capacity: 7,000 kg Lifting height: 3,520 mm Fork length: 2,400 mm Maximum fork width: 1,930 mm Minimum fork width: 560 mm Number of wheels: 6 MACHINE DETAILS Mast type: Duplex Fuel type: Electric Battery brand/type: Still Battery year of manufacture: 2019 Battery voltage: 80 V Battery capacity: 1,240 Ah Battery test result: 65% Operating hours: 13,119 h Dimensions & Weight Lsdpfoz D Urkjx Abyeru Dimensions (L x W x H): 3,750 x 2,000 x 2,920 mm Shipping weight: 12,414 kg Number of shipping packages: 1 EQUIPMENT Side shift 4-way fork spreader Work lights Full cabin Heater Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, grinding length, max. 600 mm Table clamping surface 600 x 200 mm Magnet dimensions 500 x 200 mm Maximum distance between table surface and center of the grinding spindle 495 mm Grinding wheel dimensions (D x b x d) 250 x 25 x 51 mm Lrsdoz Ayqxjpfx Abyju Grinding spindle drive 5.5 kW

Condition: used, Reportedly unused SGL Carbon type ECH-EC3-07B-1P/P carbon block heat exchanger. Approximate heat transfer area of 10.2sqmt. Space 1 rated 2 bar maximum allowable pressure at 170 deg.c. Space 2 rated 5 bar maximum allowable pressure at 130 deg.c. Lredpfx Aszfifwjbyeu

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,468 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,800 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis HAAS VF5-HE vertical machining centre was manufactured in 2005. It features a spacious table size of 1372 x 610 mm and a maximum table load of 1800 kg. The machine offers impressive X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF5-HE machine we have for sale. Contact us for further details. • Table dimensions: 1372 x 610 mm • Rapid traverse speed: 18,000 mm/min • Spindle motor power: 30 hp • Tool magazine capacity: 20 positions • Tool change time: 4.2 sec • USB port • 3-color status light Lredpfx Ajzibu Sjbyeu • Through-spindle coolant Additional equipment • Tool probe • Renishaw wireless workpiece probe • Chip conveyor • Set of tool holders • Documentation Technical Specification Taper Size BT 40

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport Lrodpfx Aboxab E Sjyou - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece Lrsdpfjxacbuex Abyju - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): Lodpey D Hr Uofx Abyjru - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: used, Year of construction: 2007, operating hours: 5,245 h, Equipment: ABS, all wheel drive, * Enclosed cab * Air conditioning * Auxiliary heater * HIRSCHMANN control system with TFT monitor * Water-cooled diesel engine, 150 kW * Continuously variable speed control * "Hare" and "Snail" speed settings Ledjzah Tdopfx Abysru * Electric parking brake * Overload protection * All-wheel drive * Hydraulic 4-point outrigger system * Central lubrication system * 30-meter arm length * 7.5-meter boom ----Vehicle number 12091 ----Errors and prior sale excepted

Condition: used, JONES SHIPMAN 1307 EIT CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1307 EIT CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM Lsdpfxjy Hi Eps Abyoru PLUS VARIABLE SPEED WORK HEAD INTERNAL SPINDLE. DOUBLE SWIVEL WHEEL HEAD. METRIC DIALS RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK PAPER FILTRATION SYSTEM REBUILT BY ANDMAR EXTENSIVE RAGE OF TOOLING AND ACCESSORIES HYDRAULIC PACK

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,100 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 150 mm, fuel type: diesel, mast type: triplex, construction height: 3,055 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 5,600 kg, total length: 3,490 mm, drive type: Diesel, construction width: 1,920 mm, Rough terrain forklift Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Lodpfx Abeym Enrjyjru Technical condition: good Front tire type: Pneumatic Front tire condition: 60 - 80% Rear tire type: Pneumatic Rear tire condition: 60 - 80% 3rd valve, 4th valve,

Condition: new, STAR ball screw Lredpfxjzcwkwo Abysu Type: 1510-3-1607 Pitch: 5 mm Thread length: 2008 mm Overall spindle length: 2100 mm Thread diameter: 31 mm 4 pieces in stock.

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen Lredpozgwbcefx Abyeu 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: ready for operation (used), KUKA 1FK7083-5AF81-1YY3-Z S16 servo motor, serial number: YFW850717856013, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ledpfx Aszd I D Nobyjru

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: Ljdpfx Aeyug Hxebyeru "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMF 500 Linear Control: Heidenhain iTNC 530 Year: 2007 SPECIFICATIONS Travel X-Axis: 5.000 mm Y-Axis: 920 mm Z-Axis: 820 mm Panning head: 1°, Hirth Spindle speeds: 20 - 10.000 rpm Tool: SK 50 Toolchanger Tool capacity: 80 Table size: 2 x 2.700 x 900 (max. 5.610) mm NC rotary table Equipment Caliper: Heidenhain TS 649 Oil mist separator Internal cooling: 40 bar Cooling tank: 980 l Lsdpfxjz Rl N Uo Abyeru Chip conveyor Electronical handwheel separating plate

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) Lrodsz Rl Hyepfx Abyeu - Peeling system

Condition: excellent (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, solenoid gas valve, gas solenoid valve -Manufacturer: Bürkert, solenoid valve unused -Type: 0313 D 2.0 FKM MS -ID No.: Voltage: 82-148 V -Quantity: 95x valve available -Price: per piece Ljdpfx Aetuycrsbysru -Dimensions: 68/32/H51 mm -Weight: 0.2 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 13,107 h, load capacity: 3,000 kg, lifting height: 4,850 mm, free lift: 1,655 mm, fuel type: diesel, mast type: triplex, construction height: 2,280 mm, fork carriage width: 1,700 mm, empty load weight: 4,673 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,750 mm, Diesel forklift Load center: 500 ISO class: FEM 3 A Mast type: Triplex Transmission: Electric drive, AC Technical condition: good Front tire type: Superelastic Front tire size: 4x 23x9-10 Front tire condition: 60 - 80% Ljdpfxjz H E Unj Abyeru Rear tire type: Superelastic Rear tire size: 2 x 21x8-9 Rear tire condition: 20 - 40% Battery year of manufacture: 2014 Double auxiliary hydraulics, cabin, heater, roof guard, dust protection, 1 work light at the front.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 10,417 h, load capacity: 1,200 kg, lifting height: 9,280 mm, free lift: 1,125 mm, fuel type: electric, mast type: triplex, construction height: 3,675 mm, fork carriage width: 580 mm, fork length: 1,200 mm, total length: 3,400 mm, drive type: Elektro, construction width: 1,430 mm, High-lift order picker Load center: 600 Fork width: 120 mm Fork thickness: 50 mm ISO class: FEM 2 C Mast type: Triplex Drive system: AC Technical condition: good Front tire type: Solid tires Front tire size: 2 x BA Front tire condition: Not present Rear tire type: Solid tires Lrodpfsz Ifq Esx Abyju Rear tire size: 1 x BA Rear tire condition: Not present Battery voltage: 48V Battery capacity: 840Ah Battery year of manufacture: 2020 Additional single hydraulic circuit, pivoting telescopic forks, full free lift, additional lift height 1,780 mm, battery, high-frequency charger TC3 IQ.

Condition: new, mileage: 1 km, power: 132 kW (179.47 HP), fuel type: diesel, fuel: diesel, color: grey, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2026, Number of doors: 5 Cab: single Number of cylinders: 4 Engine displacement: 2,200 cc Overall condition: very good Technical condition: very good Visual condition: very good Lrsdsz Rzqzspfx Abyju Damages: none Warranty: none

Condition: used, Year of construction: 1978, el. cabinet. Documents are available. Capacity: app. 15-20.000 ltr/h Ledpsz R Dkqjfx Abyeru Suitable for wine, beer