Used Ismet Transformer for sale (724)

Condition: new, Year of construction: 2021, functionality: fully functional, type of input current: AC, overall weight: 100 kg, input voltage: 380 V, input frequency: 50 Hz, total height: 200 mm, total width: 300 mm, total length: 300 mm, nominal power (apparent): 20 kVA, secondary voltage: 44 V, temperature: 100 °C, input current: 55 A, type of output current: AC, output voltage: 44 V, Equipment: type plate available, New - 3 transformers. Dedjx D Uw Aspfx Aaieck 380/400/415V to 44V(460A)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 28461, overall weight: 3,860 kg, input frequency: 50 Hz, nominal power (apparent): 1,000 kVA, Equipment: type plate available, For sale: EMIT 1000kVA Transformer Djdpfoyt Er Djx Aaijck Type: TA0o1000/15, serial no. 28461 50Hz HV 15,750V ±5% - 2x5%; LV 400/231V; Short-circuit voltage 5.34%; No-load losses 2080W; Load losses 11,090W; Total weight 3860kg; 50 Hz; active part 2200kg; oil 940kg; Current 3; Duty type C; Standard PN69/E06040 S1min Net price 12,000 EUR Price negotiable

Condition: used, Year of construction: 1980, functionality: fully functional, overall weight: 3,730 kg, input frequency: 50 Hz, nominal power (apparent): 1,000 kVA, Equipment: type plate available, For sale: 1000kVA Transformer BEZ BRATISLAVA CZECHOSLOVAKIA Type a T0394/22 50Hz 15750±5%; 400/231V; 36.66A; 1444A Dcedjyt El Ropfx Aaiek Oil 840kg Total weight 3730kg S1min Net price: €12,000 Price negotiable

Year of construction: 2009, condition: new, functionality: fully functional, Zinc electrolysis rectifier group supplied by Siemens consisting of : 1. Transformer 500 kA - power rating 2 x 16.78 MVA, primary voltage 6.3 kV, 50 Hz, secondary voltage 238 V, transformer cooling OFAF, 4 fans, 2 pumps 2. Two rectifiers DC100 kA, 125 V - number of thyristors mounting places 60 / 10 per phase, number of installed thyristors 54 / 9 per phase, thyristor T4301 N22 TOF, control range 85V to 125V DC, phase effect - per rectifier: 6-pulse, per group 12-pulse 3. Four DC – switches Ritter, Germany, type 2 x HCD-AI-D-100, 2 x HCD-AI-D-110, nominal current: 2 units 100 kA, 2 units 110 kA, motor drive 3 x 400V / 50Hz, auxiliary contacts 6 NO; 6 NC 4. Cooling group - cooling capacity 360 kW, type WFAF /water forced air forced/, internal water circuit 65% deionised water, 35% glycol, number of fans - 8 fans on outdoor heat exchanger, 2 coolers, conservator, cooling block group with pumps, heat exchanger with fans, pipes and consoles for cooling group 5. Control cubicled 6. Overall rectifier control is carried out with a Simatic S7-300 PLC, with a CPU317-2DP, as Dcsdpfx Aajudxb Rsiek central unit For more details, please feel free to contact us!

Condition: new, Manufacturer: SBA TrafoTech GmbH Type: DS-UL-G140 Device type: Three-phase autotransformer Frequency: 50–60 Hz Protection class: I Degree of protection: IP23 Dsdpfx Aezcgy Ioaijck Insulation class: B/F Maximum ambient temperature: 40 °C Design: UL-compliant transformer series DS-UL-G140

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 300 mm Spindle bore diameter: approx. 52 mm Maximum main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Control system: FANUC CNC Machine weight: approx. 2,200 kg Operating hours: approx. 6,458 h Spindle hours: approx. 4,300 h Voltage: AC 380 V (with or without transformer) Rated power: 14.97 kVA Full load current: 22.74 A Interrupting capacity: 5 kA Short-circuit capacity: 10 kA Power of the electric motor according to the manufacturer: 7.5 kW EQUIPMENT Technical documentation Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with rapid indexing Dcjdpfjznb Ntsx Aaisk Compact design with low space requirements User-friendly CNC control High reliability Low maintenance requirements Complete technical documentation

Condition: like new (used), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: S2000BM-00308, turning diameter over cross slide: 360 mm, turning length: 540 mm, turning diameter: 360 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 600 mm, bar passage: 68 mm, Only 3 operating hours - the machine has not yet been used due to a project cancellation. New price: EUR 124,000 plus VAT. TECHNICAL DETAILS Max. swing diameter over bed: 510 mm Max. swing diameter over slide: 360 mm Max. turning diameter: 360 mm Djdpfx Aaezpwmqjijck Max. turning length: 540 mm SPINDLE Spindle nose: A2-6" Bar capacity: 68 mm Max. spindle speed: 4,500 min⁻¹ Main spindle motor power: 15 / 18.5 kW C-axis: continuous TURRET Tool stations: 12 / BMT 55 Motorized tool stations: 3.7 / 5.5 kW Speed of motorized tool stations: 5,000 min⁻¹ Max. torque motorized tool stations: 16 Nm Indexing time tool turret: 0.15 s Tool holder for external tools: 25 × 25 mm Tool holder for internal tools: Ø 40 mm TAILSTOCK Tailstock mounting: MK 4 Tailstock type: programmable Tailstock quill stroke: 450 mm Tailstock quill diameter: 75 mm Tailstock taper: MT 8 Tailstock quill force: 5,047 Nm AXES AND FEEDS Travel X-axis: 210 mm (180 + 30 mm) Travel Z-axis: 600 mm Drive power X/Z-axis: 1.8 / 3.0 kW Guide rail inclination: 45° Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Ball screw X-axis: Ø 28 mm Ball screw Z-axis: Ø 40 mm ACCURACY Unidirectional positioning repeatability: 6 µm Positioning accuracy X-axis according to ISO 230-2:1988: 15 µm Positioning accuracy Z-axis according to ISO 230-2:1988: 15 µm MACHINE DETAILS Operating hours: 3 h Control system: FANUC 0i TF PLUS Connected load: 31 kVA Supply voltage: 380 V ±10 % Mains frequency: 60 Hz Phases: 3 Machine length without chip conveyor: 2,643 mm Machine depth: 1,560 mm Machine height: 1,920 mm Machine weight incl. chip conveyor and transformer: 4,000 kg COOLANT SYSTEM Coolant tank volume: 185 l Coolant pump output: 0.5 kW Coolant flow rate: 20 l/min Coolant pressure: 5.0 bar EQUIPMENT - FANUC 0i TF PLUS CNC control system - CE conformity - IndustryNet4 connection: remote maintenance, remote monitoring and Industry 4.0 requirements. - Manual Guide i (MG-i) - Preparation for tool force monitoring - 10.4" color LCD monitor - Electronic handwheel - USB interface - Ethernet interface - RS-232 interface - Memory card slot - Manual tool measurement - Parts catcher - Hydraulic 3-jaw chuck, Ø 200 mm, bore 68 mm - Rigid threading - Control cabinet with heat exchanger - Automatic coolant system with 4.5 bar pressure - Central, time-controlled lubrication system - Cooling system for the hydraulic unit - Belt-type chip conveyor with right-hand discharge - Electrical and electronic preparation for bar loader - Internal machine work light - External machine status indicator

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Dodpfx Aaezmx Sceijck Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Dcedpfsuk U I Ujx Aaiok Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. Dedpfjztf A Usx Aaijck - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Dcedjx T Ah Dopfx Aaisk Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, This listing is for a Fisher Scientific Model 45 Colorimeter. The unit is in full working condition and is ready for immediate release. Dcedpfxoxxz Nzj Aaiok The Fisher Scientific Model 45 Colorimeter is a digital instrument that provides precise color measurements in a variety of laboratory applications. Here’s a detailed overview of its features and specifications: Key Features: Digital Colorimeter: The Model 45 is engineered to deliver accurate and consistent color measurements, suitable for various laboratory analyses. 240V Transformer: The instrument is equipped with a built-in transformer that operates on 240V, ensuring compatibility with power supplies in many regions. Wide Filter Range: The colorimeter features filters that cover the wavelength spectrum from 400 to 700 nm. This range is essential for analyzing visible light and enables the instrument to accurately assess color in different sample types. Versatile Measurement Capabilities: It is designed to measure the color of: Transparent Liquids: Suitable for solutions and liquid samples. Opaque Solids: Can analyze solid materials where color determination is needed. Powders and Pastes: Capable of measuring the color of powders and viscous materials, making it adaptable for a wide variety of applications. Used Condition: This model is available for purchase in used condition, which may present an opportunity for budget-conscious labs looking for reliable color measurement tools. Applications: The Fisher Scientific Model 45 Colorimeter is particularly useful in various fields, including: Quality Control: Used in production settings to ensure color consistency and quality in products such as food, pharmaceuticals, and paints. Laboratory Research: Employed in research laboratories for quantitative analysis of color in different samples, contributing to studies in chemistry, biology, and environmental science. Formulation Development: Assists in the formulation of products where color accuracy is crucial, such as cosmetic and personal care products.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 500 h, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, table load: 2,500 kg, overall weight: 20,500 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details. • Condition: Excellent; approximately 500 cutting hours; near-new condition • Heavy-duty machining center for high material removal rates • Extremely rigid machine structure • Box guideways on all axes; quadruple box guideway system on Y-axis • Automatic oil lubrication for guideways with machine stop monitoring • Okuma OSP300 control with IGF conversational programming • Parameterized automatic tool collision prevention system Dcsdpfx Aaszqcr Ieijk • Automatic cutting force, tool load, and spindle torque monitoring • Tool life management and tool usage monitoring • Communication interfaces: USB, PCMCIA, RS-232 • Cutting force: 580 Nm • Chip removal capacity: 540 cm³/min • Spindle speed: 6,000 rpm • Spindle oil cooler • Table size: 2,200 × 850 mm • Rapid traverse: 20,000 mm/min • Tool change time: 0.5 s; chip-to-chip time: 5 s • Machine currently under production; can be inspected under power by an official Okuma technician • Includes documentation: spare parts list, electrical diagrams, programming manual, operation manual • Delivery: Immediate, subject to prior sale Additional equipment • Renishaw tool measuring system • Independent Knoll high-pressure coolant system (70 bar) • 30-micron coolant filtration system • LTA mist extraction system • Rear hinge-type chip conveyor • Large set of BT50 tool holders • Transformer Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Dodpfx Aajvtcvieiock Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 200 kg, mast type: telescopic, lifting height: 19,800 mm, overall weight: 3,050 kg, transport length: 6,400 mm, transport width: 1,100 mm, transport height: 1,990 mm, fuel type: electric, Used OMME 2200 RBD Telescopic boom lift on tracked chassis with combined battery/diesel power Max. working height: 21.80 m Max. reach: 12.20 m Max. load capacity: 200 kg Climbing ability: 19 degrees Drive: Kubota diesel engine 18.8 hp and 24 V / 200 Ah battery (5 hours) Color: red Special features: non-marking, light-colored tracks, remote control, power transformer Features: - Detachable basket - Rotatable basket +/- 41 degrees Dodpfjxhd Husx Aaisck - Variable outriggers - Basket size: 1.25 x 0.80 m - 230 V connection in the basket Technically fully functional, visually as shown UVV inspection upon handover Available from stock in Langenhagen. All information regarding the machine is without guarantee. Subject to typing errors, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 4,000 W, number of axes: 3, This 3-axis FANUC α-D21MiB was manufactured in 2022. It features a spindle speed of 10,000 rpm and a maximum tool storage capacity of 21 tools. The machine offers impressive X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. If you are looking to get high-quality machining capabilities, consider the FANUC α-D21MiB vertical machining centre we have for sale. Contact us for further details. - Spindle Taper: BBT30- Spindle Load / Torque (High Torque 10,000 rpm): 80 Nm (1 min), 13.6 Nm (continuous)- Spindle Load / Power: 14.2 kW (1 min), 4 kW (continuous)- Z-Axis Travel: 330 mm (+100 mm High Column)- Distance from Spindle Nose to Table: 250 - 580 mm (with HC100)- Tool Storage Capacity (ATC): 21 tools- Tool Change Time (Cut-to-Cut): 1.6 s- Max. Tool Length: 250 mm- Max. Tool Diameter: 80 mm- Max. Tool Mass: 3 kg- Rapid Traverse (X/Y/Z): 54 m/min- Programmable Cutting Feedrate: 30,000 mm/min- Acceleration X/Y/Z: 1.4G / 1.0G / 1.6G- Positioning Accuracy (Bidirectional): < 0.006 mm- Repeatability (Bidirectional): < 0.004 mm- Air Pressure / Flow Consumption: 0.35 - 0.55 MPa / 150 L/min- Machine Weight: 2,000 kg (2,200 kg with DDR-TiB)- additional available accessories:* Transformer 20 kVA/IP23* High Column 100 mm* Top Cover High Column Parts HC100* Festo G3/8" Push-in Fitting 12mm for CTS Sealing* Festo 12mm Blanking Plug for CTS Sealing Dcodpszn Umxjfx Aaiok

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E incl. V7 Adv. controller, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Dedezmyfwepfx Aaieck Software expansion: Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600A) with Premium control module, wire feeder, burner hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch test gauge individual as well as with CDD, mechanical cleaning with wire cutter, external cleaning, pressure booster, wire spool equipment. Elevated track 20 kN, travel path 10 m, 2 track supports. 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connection control, 2 start pre-selection, partition walls and 2 sliding gates incl. end switch protection. 1 filter unit Tecau 6000 m³ extraction capacity, 1 extraction hood 3x2.5 m with curtains, suction slit channel. Documentation, CE declaration. The system was dismantled in June, inspected before dismantling, and regularly maintained by Cloos.

Condition: good (used), Power: 7,8 kW. Amperage: 52 A. Voltage: 150 V. 100% ED Magnet L x W: 1.780 x 1.380 mm. Conveyor belt: 1.400 mm. AA. : Ca. 2.800 mm. With transformer rectifier of 380V. primary. Dcjdpfx Aajg Stwmsiek Overband separator will be overhauled, sandblasted, painted.

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab Dcedpevcuddjfx Aaisk * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: used, mileage: 656,000 km, power: 290 kW (394.29 HP), first registration: 06/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device into the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic gearshift * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning system * Navigation system * Differential lock * Full air suspension * reversing camera Dedpfx Aovcudksaijck * Spoiler * Automatic air conditioning * Heated seats * Aluminum floor * Interior load compartment 8,100 x 2,480 x 2,200 mm * Tires front + hi. 385/55 R 22.5, mi. 315/70 R 22.5Only available as a train with Delivery only with matching trailer: * Flap at the front for loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Drive mode with generator + 380 volt standby mode * 2,000 kg tail lift * Manufactured by Wüllhorst * Interior loading space 7,350 x 2,480 x 2,200 mm * 18,000 kg . * EZ 06/2018 * SAF axles * Disc brakes * Air suspension The price includes the truck and the trailer as a complete train. Several trains available, from year of construction 2015 - 2018---- Special equipment: Axle load front axle 8.0 t, Airbag driver's side, Audio system: CD radio (Bluetooth), Exhaust to bottom right, Battery 220 Ah, Brake connection standard and DuoMatic, Compressed air connection in cab, Compressed air tank aluminum, Compressed air unit high, Driving assistance system: Lane departure warning system, Tinted windscreen with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Communication interface, Air compressor 2-cyl, Engine output front with preparation Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing alarm acoustic (warning signal outside), Switch tail lift, Automatic circuit breaker, Seats in cab: Driver's seat Swivel seat comfort, Sun protection roller blind side window, Driver's door, Voltage transformer 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation 2nd control unit for level control, preparation CB radio, preparation cool box / refrigerator, additional heat insulation, additional heating (water) Further equipment: EURO 6 emissions standard, axle configuration: 6x2, trailer brake 2 - line, left-hand connections, trailer socket 24V / 15-pin, Antos, exterior mirrors electr. adjustable and heatable, rear axle differential lock, cab: width 2.30 m, cab: hydraulic tipping device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric window lifter, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 ltr, Manual lifting roof (steel), Rear axle disk wheel 440, Body/structure: Chassis, comfort locking system, fuel tank: 290 ltr. aluminum, unregulated power steering pump, lift device trailing axle, air intake from front, engine 10.7 ltr. - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tyres, ramp mirror, spare wheel, residual heat utilization, front and rear axle disc brakes, seat cover/upholstery: fabric, seats in cab: Passenger functional seat, Front splash guard, Front axle stabilizer bar, Additional stabilizer bar, Rear axle / trailing axle, 24 V cab socket, Tachograph / EC tachograph, Aerodynamically shaped underbody panelling, Front underride guard, Preparation for toll collection, Cranked front axle

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Djdpfx Aey St Sdeaisck Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. Dcodpfewdny Tex Aaiok - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Condition: new, Siemens 4BU5695-0CC02-0C control transformer, housed in a wheeled cabinet, unused, 100% functional, new price €8,000 net! – Please request shipping costs separately! Dcsdji Edbrjpfx Aaijk

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: SEW Eurodrive, Movitrac drive inverter -Type: Movitrac 31C014-503-4-00 Dcedpfxozk D Tte Aaiok -Item No.: 8263744 -Power: 2.8 kVA -Input: 380-500 V 50/60 Hz -Output: 0-400 Hz -Dimensions: 185/105/H190 mm -Weight: 1.9 kg

Condition: excellent (used), Year of construction: 2017, Mazak Optiplex Nexus 3015 Fiber 4KW Laser Cutting Machine Manufacturer: Yamazaki Mazak Corporation Type: Optiplex Nexus 3015 Fiber 4KW Year of manufacture: 12/2016 Condition: used, very good, under power Availability: from July 2023 Operating hours: Time CNC AN 16.276h Time Laser AN 15.653h Time automatic operation 11.096h Cutting time 10,964h Total cutting time 7,365h CNC control: MAZATROL PREVIEW 3 Weight: 12800 kg Power requirement: 57 kVA. Dimensions: 8,490mm x 3,485mm x 2,010mm Axis travel: 3,100mm x 1,580mm x 110mm GENERAL MACHINE OPTIONS 6981SD120 1 set of adjustment tools 6981TL307 Support grid (distance between bars 100mm) 6981AS670 Automatic calibration device 6981SD154 Non-contact height sensing with repeat function 6981AS684 Nozzle cleaning brush 6981AS678 Focus position adjustment 6981SD168 Manual workpiece clamping 6981SD130 Machine feet / leveling shoes 6981SD282 Machine status indicator light 6981SD216 NC monitoring for shielding gas pressure 6981SD189 Without resonator 6981NO513 Programming function on the control unit via fixed programs 6981CV222 Collecting container for material waste 6981NO612 Cutting table layer detection 6981EL110 Transformer for the European market 6981SD200 Additional selector switch for cutting gas CUTTING HEADS 6981LN705 Multi-Control cutting head 6981LN005 Lens for Multi-Control cutting head 6981LN610 Cassette for focus lens Multi-Contro cutting head 6981LN602 Protection window for Multi-Control cutting head 5 pieces Dodpfoyuchxex Aaijck NOZZLES 6981NZ068 Mazak Hi-Acc Pencil Nozzle(Sgl)1.0,3.0Mm 5 pieces each 6981SD317 Mazak Hi-Acc Pointed Nozzle (S)1.2,1.5,2mm each 5 pieces 6981SD303 Mazak precision nozzle adapter (8 pieces) AUXILIARY GAS LINES 6981TL321 3rd auxiliary gas line (30 bar) PAINTING 6981SD728 Mazak standard color PROTECTIVE HOUSING 6981CC096 Laser safety screen (5 pieces) SAFETY DEVICE 6981SD030 Work area lighting 6981SD748 Machine with CE mark 6981ES230 Preparation for dust separator FACTORY AUTOMATION 6981AS050 Automatic switch-off via circuit breaker trigger The power supply is switched off at the end of a program. PALLET CHANGER 6981PC010 2-fold pallet changer. The next workpiece can be prepared during processing. NUMERICAL CONTROL 6981NC319 15″ Xga Color Tft monitor 6981NO869 LAN interface 6981NC083 Mazatrol Preview 3 control unit 6981FT575 NC repeat function 6981MZ200 Relocation Detector 6981NO870 USB interface for PC MACHINE MODEL 6981SD185 Preparation for 4kW resonator GENERAL MACHINE OPTIONS 6981AS662 Automatic nozzle change magazine with 8 slots 6981AS685 Nozzle cooling function 6981DEAA002 Fiber Laser Resonator 4kW incl. cable and cooling unit 6981SD118 Intelligent monitoring + focus point detection 6981RB165 Workpiece lifting table (CE) PERIPHERAL EQUIPMENT INCLUDED 6981DEES001 Extraction unit for Donaldson DFPRO4 laser cutting machine DOCUMENTATION 6981SD073 Set of manuals in electronic form on CD