Used Homag Optimat Kal 210/6/A20/S2 for sale (53,050)

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 5,722 h, load capacity: 6,000 kg, lifting height: 5,460 mm, free lift: 1,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,720 mm, fork carriage width: 1,600 mm, fork length: 2,400 mm, empty load weight: 9,000 kg, total length: 3,550 mm, drive type: Diesel, construction width: 1,600 mm, Diesel forklift Load centre of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tyres type: Superelastic Front tyres size: 355/65-15 Rear tyres type: Superelastic Rear tyres size: 8.25-15 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DCE60-6. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin, full free lift, Iiedpfxoxirqke Amisb

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 16,497 h, load capacity: 12,000 kg, lifting height: 5,540 mm, fuel type: diesel, mast type: simplex, construction height: 4,220 mm, fork carriage width: 2,720 mm, fork length: 1,800 mm, empty load weight: 16,520 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,520 mm, Diesel Forklift Load Center: 600 mm Fork Width: 250 mm Fork Thickness: 70 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 12.00-20 Rear Tyres Type: Superelastic Rear Tyres Size: 12.00-20 Isdpfx Aoxua Dijmieib Description: In addition to this Kalmar model, we have approximately 200 other heavy-duty forklifts, compact forklifts, standard forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing on attractive terms are always available. We are also happy to purchase your used equipment directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly advise you in detail about this DCE120-6. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modification for forklifts from 8 tons upwards. We can also offer your vehicle for consignment sale through our premises. Sideshift, fork positioner, Fork positioner opening range: 640 / 2600 mm Heater, full cabin, air conditioning,

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 16,312 h, load capacity: 8,000 kg, lifting height: 6,840 mm, free lift: 2,260 mm, fuel type: electric, mast type: triplex, construction height: 3,510 mm, fork carriage width: 2,050 mm, fork length: 2,000 mm, empty load weight: 12,501 kg, total length: 3,950 mm, drive type: Elektro, construction width: 2,050 mm, Electric 4-wheel forklift Iedju Dzcaepfx Amijib Load centre: 600 mm Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: ready for operation and fully functional Technical condition: very good Front tyres type: pneumatic Front tyres size: 8.25-15 Rear tyres type: pneumatic Rear tyres size: 8.25-15 Battery voltage: 80V Battery capacity: 1720Ah Battery year: 2018 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Lease-purchase and financing at favourable rates are always possible. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our proprietor Mr. Peter Sawitzki will be happy to advise you in detail on this ECG80-6. P.S.: Our master forklift workshop specialises in repair, maintenance, overhaul and special construction for forklifts from 8t upwards. We are also happy to offer your vehicle on consignment sale. Sideshift, fork positioner, heating, full cab, full free lift, rotating seat

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 16,437 h, load capacity: 8,000 kg, lifting height: 3,770 mm, fuel type: electric, mast type: simplex, construction height: 3,260 mm, fork carriage width: 2,050 mm, fork length: 2,500 mm, empty load weight: 12,501 kg, total length: 4,000 mm, drive type: Elektro, construction width: 2,020 mm, Electric 4-wheel forklift Load center: 600 mm Ijdpfx Aju Dzctjmijib Fork width: 180 mm Fork thickness: 80 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tires type: pneumatic Front tires size: 8.25-15 Rear tires type: pneumatic Rear tires size: 8.25-15 Battery voltage: 80V Battery capacity: 1720Ah Battery year: 2018 Description: In addition to this Kalmar model, we currently have about 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing on favorable terms are always possible. We are also interested in directly purchasing your used machine, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide detailed advice about this ECG80-6 model. P.S.: Our master forklift workshop is specialized in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons upwards. We can also place your machine on consignment sale. Sideshift, fork positioner, heater, full cabin, rotating seat.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 6,175 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 300 mm, number of axes: 3, total height: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE Profi BMG 611/60/15/F/AP was manufactured in 2012. A CNC Wood Machining Centre designed for precision and efficiency in woodworking applications. Consider the opportunity to buy this HOMAG WEEKE Profi BMG 611/60/15/F/AP CNC Wood Machining Centre. Contact us for further details regarding this machine. Additional equipment • Safety devices: Laser, bumper • Torque support: Yes • Grooving saw: 90° pivoting • Vertical drilling spindles: 17 • Horizontal X drilling spindles: 2 • Horizontal Y drilling spindles: 2 • Liquid-cooled milling spindle: Yes • Closed drag chain: Yes • Handheld terminal: Yes • HOMAG SaveScan: Yes Machine Benefits Technical Machine Benefits Iiodpfx Aeyap S Iomiob • High spindle speed • Comprehensive safety features • Independent z-axes: 2 • 4th axis: yes • 5th axis: 5-axis spindle • Workpiece support aids available • Machine table: console table • Number of consoles: 12 • Features: automatic table positioning, homag ap table, two stop rows Extra Information Conformity marking: CE mark Dimensions Machine Depth 6175 mm

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment Iijdpfx Asx D Ribsmijb • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. Iisdpfx Asxacfajmisb cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm from a maintenance workshop with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Condition: used, machine/vehicle number: 007987, Position 1: Single Edgebanders HOMAG-HIGHFLEX 1650 Position 2: Panel Return Systems HOMAG-HIGHFLEX 1650 Iijdpfx Aex A Thqjmiob

Condition: used, machine/vehicle number: 008365, Position 1: Single Edgebanders BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Ijdpfx Ajx Swf Uemioib Position 2: Panel Return Systems BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. Application Types CNC Wood Machining Iijdpfx Asx D Ra Hemisb

Condition: used, machine/vehicle number: 007516, Max width workable: 2500 mm Isdpfx Amowuz D Toioib

Condition: excellent (used), functionality: fully functional, Baykal hydraulic guillotine shear type HNC 8100/6 working width 8100 mm maximum sheet thickness 6 mm motorized backgauge Iedpfx Aox Rbhdemijib automatic blade gap adjustment automatic cutting angle adjustment sheet support device

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Machine number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Isdpfoy Exwfsx Amioib Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Short-circuit current: 5 kA Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Depth: 800 mm/ Width: 2,870 mm/ Height: 938 mm Iiedpfx Amslq Em Hoieb Included in delivery: 02x workbench stand, used material color: grey frame profile: 85 mm stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: yellow box profile: 90 x 50 mm type of truss: SLB execution: head traverse clear width: 2.690 mm 08x safety pins, used execution: completely galvanized 01x chipboard II. choice, used thickness chipboard: 38 mm width chipboard: 2.870 mm depth chipboard: 800 mm Surface: coated if necessary (if necessary in two parts) 01x Chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.670 mm depth chipboard: 800 mm Surface: coated if necessary (if necessary in two parts) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm

Condition: good (used), Depth: 1,000 mm/ Width: 2,870 mm/ Height: 938 mm Included in delivery: 02x workbench stand, used material color: grey frame profile: 85 mm stand height: 900 mm stand depth: 1.000 mm incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: yellow box profile: 90 x 50 mm type of truss: SLB execution: head traverse clear width: 2.690 mm 08x safety pins, used execution: completely galvanized 01x chipboard II. choice, used Iiedpolq Em Rsfx Amiob thickness chipboard: 38 mm width chipboard: 2.870 mm depth chipboard: 1.000 mm Surface: coated if necessary (if necessary in two parts) 01x chipboard II. Choice, used thickness chipboard: 38 mm width chipboard: 2.670 mm depth chipboard: 1.000 mm Surface: coated if necessary (two-part if necessary) 16x drilling screws, new finish: galvanized dimensions: 6,3 x 70 mm

Condition: used, functionality: fully functional, machine/vehicle number: 0000, Year of construction: 2018, load capacity: 10,000 kg, lifting height: 4,970 mm, free lift: 4,450 mm, fuel type: diesel, mast type: duplex, construction height: 4,450 mm, fork length: 2,400 mm, total length: 4,750 mm, drive type: Diesel, construction width: 2,500 mm, Diesel forklift Chassis number: 0000 Load center: 600 ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Duplex Condition: Refurbished without warranty Iiedpfx Amoym Hw Ueieb Technical condition: Very good Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, full cabin,

Condition: used, functionality: unexamined, Ferwood Code: RU0010622 - Manufacturer Code: 2-083-01-0276 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 3KG - Dimensions: 36X26X21 cm - If interested, we offer a refurbishment service. Please contact us. Iisdpfx Ajyrq Alomijb

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Iodpjyrpxxjfx Amijib

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Iisdpfxsyrpw Is Amieb

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D Iisdpfx Ajlikvhjmijb X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Iodslikydepfx Amieib Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space

Condition: used, Year of construction: 2019, load capacity: 14,000 kg, lifting height: 4,530 mm, total length: 7,340 mm, Electric forklift Kalmar ECG 140-6 Drive Electric Year built 2019 Lifting height (mm) 4,530 Iodpfxoylc N Re Amijib Lifting weight (kg) 14,000

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: 0-261-96-0637, Equipment: documentation/manual, Feeding and Discharge of Workpieces • Upper pressure belt • Variable feed rate: 8–18 m/min Iedjy Eft Tjpfx Amioib • Front air-cushion table • Automatic infeed fence • Prepared for connection to return system Edge Banding • PUR pre-melter, capacity 2.5 kg/h • Glue pot QA65, quantity: 2 • Support for narrow workpieces • Automatic edge feed Workpiece Finishing • Anti-adhesive and cleaning fluid system • End trimming unit • Edge milling unit with R-2 and R-1 tooling • Flat scraper, top/bottom polishing unit • Multifunctional profile scraper unit with R-2 and R-1 tooling • Corner rounding unit with R2 tool, dual-motor MF50 Documentation • Language options: English, German, Croatian • Format: Data storage medium + paper documentation General Information • Year of manufacture: 2017 • Control system: HOMAG POWERTOUCH group • CE marking: YES • Availability: Ready for collection – April 2026 • Machine length: approx. 6,075 mm

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Iijdpfxou T Tt Tj Amijb Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Movement system: suction cups.

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0002517 - Manufacturer Code: 4-008-61-0284 - Condition: As new (ex-demo/display item) - Functionality: Fully operational - Compatible Machine: - If interested, we offer a refurbishing service; please contact us. 1KG 20X20X20 Ijdjymfldspfx Amieib