Used Homag Kal 526 /5/A3/25/S2 for sale (64,660)

Year of construction: 2005, condition: good (used), Technical data: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - Feeds - drill spindle stroke 120 mm - Drilling spindle speeds infinitely variable 80 - 1400 rpm - Throat 260 mm Blsdpfxof A Dywo Alcsh - max. distance table - drilling spindle 760 mm - Table with 2 T-slots 500 x 350 mm - Height adjustable via gear rack with crank handle - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 500 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - drill chuck 3-12 mm - Lighting

Condition: used, mileage: 1,001 km, first registration: 01/2012, empty load weight: 415 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2012, Equipment: crane, Vehicle location: Bovenden, shell width: 650mm, capacity: 390l! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bjdpsi Rrwaefx Alcslh - .

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, pressing force: 80 t, table width: 60 mm, working width: 2,500 mm, TECHNICAL DETAILS Pressure: 80 t Bending length: 2,500 mm Table width: 60 mm Working height: 960 mm Dimensions and clearances Clearance between columns: 2,160 mm Clearance between press beams: 370 mm Thrust: 400 mm Bedpfx Ajwmdf Dslcslh Weight Machine weight approx.: 5,000 kg

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec Bsdpfx Aleymadujcslh

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING - Initial diameter : 15 - 75 mm - Pointed diameter : 10 - 50 mm - Force : 25 tons Blodpsymacwofx Alcsh - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Tools: Rotating hammers

Condition: used, mileage: 564,000 km, power: 300 kW (407.89 HP), first registration: 12/2008, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: automatic, emission class: euro5, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: crane, soot filter, Crane: ----- Retarder, air conditioning, lift and steering axle, Fassi 165-5 with radio remote control, trailer coupling Bsdpfx Aloycbh Hecjlh Suspension: Air suspension

Condition: used, mileage: 311,818 km, power: 70 kW (95.17 HP), first registration: 09/2011, fuel type: diesel, empty load weight: 2,380 kg, maximum load weight: 1,120 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,250 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), Power/Engine: 2,148 cm³, with turbocharger Axles: 4x2 Brakes: Disc brakes Driver's cab: Tinted windows, electric windows, electric. Exterior mirrors, outside temperature display, JVC audio system, radio, CD player, CD changer, refrigerated body: Cold Car, deep freeze, 3 doors on the left, number of doors on the right: 3 doors, fixed partition wall, refrigeration unit: Thermo King, Multi-Temp with 2 evaporators, compressor/electric drive, cooling down to -25 °C, other equipment: power steering, immobilizer ID: 117915 Wheelbase 3250mm, ice-cooling body, Cold Car, 3 doors on the left, 3 doors on the right, Electronic Stability Program (ESP®), front axle stabilizer, battery management, electrics for trailer socket, configurable special module, radio, heated and electrically adjustable exterior mirrors, storage above the windscreen, 6-speed manual transmission, adaptive brake lights, cruise control, spare wheel, driver airbag, smoker's package, hydraulic jack. Multi-temperature for customers who require different controlled temperatures so that different products can be delivered with just one vehicle. The temperatures in the two areas can be set separately and independently of one another. This allows you to transport, for example, both frozen products at -25°C and dairy products at +3°C simultaneously in separate compartments. The unit can be powered either by electricity (220V) or by the engine while driving. We always have a large selection of used refrigerated and ice-cold vehicles in stock. You can find more information about our range at [link missing]. Non-binding offer, sale to businesses only, errors and prior sale excepted. Advertisements and company logos on vehicles may have been digitally altered in photos. Bsdpfx Aov R Nr Sjlcslh

Condition: good (used), 1 x Deburring machine Vollma JK WS 25 Particularly suitable for removing cut-off slugs on turned parts. Bjdpfxsiz Dc Re Alcelh The machine can be inspected at our warehouse in Reichenbach under power.

Condition: used, machine/vehicle number: 16737, operating hours: 2,683 h, load capacity: 2,500 kg, lifting height: 200 mm, construction height: 1,400 mm, fork length: 1,150 mm, enginetype: Electric, manufacturer: Still Bjdpfsx Ntx Sjx Alcjlh

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 Blsdjfd Ilyjpfx Alcoh - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T Bodecr U Uropfx Alcslh SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, machine/vehicle number: 5067caac5acaa655d1d94bd2d, empty load weight: 760 kg, maximum load weight: 1,740 kg, overall weight: 2,500 kg, axle configuration: 1 axle, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grained steel welded constructionincl. 4 mounting points for IBC containers if technically possible Drawing approval required from the customer if ordered! Bodpfxoi Ri Ane Alcelh 2 side members as double T-beams for subsequent self-supporting superstructure with front cross member 2 pairs of lashing eyes for lashing the IBC container Telescopic support foot at the front Wheel chocks with holder Mudguards without side bumpers Steel underride guard Towing device central axle trailer Towbar with tested 40 mm towing eye, forwarding version Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension GFA or BPW axle of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical system 24 volt, multi-chamber lights, without amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Country of registration / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Attention! These are archive pictures.

Condition: used, machine/vehicle number: 006849, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Bjdpfx Alowd Itmjcolh

Year of construction: 2017, condition: new, machine/vehicle number: 185426043, Backhoe bucket MS21/25 Specifications Manufacturer Manfred Kaiser - Maschinenbau GmbH Equipment type backhoe bucket MKS 21 cutting width 800mm Capacity 0,8cbm Weight 710kg Year of manufacture 2017 Features Bedpomwitpsfx Alcjlh Backhoe bucket 0,8m NEW 4 times available Additional Information Equipment: excavator arm, Purpose: construction, Unloaded weight: 710 kg, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Year of construction: 2026, condition: new, Robuschi RBS25 blower No. 2600741 Year 2026 Bedpfoyrqwcox Alcslh NEW

Condition: used, machine/vehicle number: 006253, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Blsdpfx Alsl Txxgjcoh Corner Rounding Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 006252, Type of edging: Thin edge, Thick edge, Solid wood Bljdpowcyckofx Alceh Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: used, machine/vehicle number: 006375, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Bjdpfx Alop Apx Tjcjlh Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: new, sheet thickness: 8bending length: 2600upper roll diameter: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- Bjdpod Ab Sfsfx Alcolh - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 13bending length: 2550upper roll diameter: 270sheet length: 2550 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.690,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references! Bljdpfx Aed Ab R Tjlcsh

Condition: new, bending length: 2600sheet thickness: 10upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- Blodpfx Alod Ab Thoceh We have many references!

Condition: new, sheet thickness: 10bending length: 2600upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Bledpfx Asd Ab Sbslcsh Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 2600sheet thickness: 13upper roll diameter: 270sheet length: 2600 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Bledpfxed Ab Tdj Alcjh Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Side supports EURO 6.690.00 We have many references!

Condition: new, bending length: 2600sheet thickness: 8upper roll diameter: 210 Bedpjd Ab Tljfx Alcelh Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: excellent (used), Year of construction: 2015, - Workpiece thickness up to 60 mm - Edge thickness up to 3 mm - Feed speed: 16 - 20 m/min - Total length: 9365 mm - Powercontrol PC23 Bedew R T Aljpfx Alcjlh Units: - Separating agent spraying unit top/bottom - Joint trimming unit 2x 3 kW - Gluing unit with 2-roller magazine - End trimming unit HL 81 0.8 kW - Pre-milling unit FF30 bottom/top; 4x 0.4 kW - Free space for 2 units - Profile scraper PN 10 - Surface scraper - Cleaning agent spraying unit - Buffing unit