Used Hino Em100 Overhauled for sale (3,193)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 7,147 h, load capacity: 36,000 kg, fuel type: diesel, construction height: 3,050 mm, empty load weight: 10,000 kg, total length: 5,200 mm, drive type: Diesel, tractive force with load: 36,000 N, construction width: 2,650 mm, Terminal tractor Hodpfxjv Uc Ihs Ad Ron Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Front tire size: 12.00-20 Rear tires type: pneumatic Rear tire size: 12.00-20 Description: In addition to this Paus model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing at favorable terms are always possible. We are also happy to purchase your used machine directly, even if you are not buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this PT36H. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upward. We are also happy to sell your vehicle on consignment. Heating, road approval (StVZO), full cab, Swivel seat

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 17,206 h, load capacity: 8,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,170 mm, fork carriage width: 2,200 mm, empty load weight: 13,050 kg, total length: 3,400 mm, drive type: Diesel, construction width: 2,250 mm, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 8.25-15 Rear tire type: Superelastic Rear tire size: 3.00-15 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing options are available at favorable terms. We are also happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this H80D-02. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons and up. We are also happy to offer consignment sales for your vehicle. Hedezagy Aspfx Ad Rsn Heater, full cabin.

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Hjdpofkg H Tofx Ad Rsn Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, machine/vehicle number: •SN:749951, ASK FOR YOUR SPECIAL PRICE!!!!! Here we offer a 150-litre round pressure boiling kettle (FES 150) from the premium manufacturer Küppersbusch (Phoeniks). Draining is made easy with a safety drain valve. The pressure boiling kettle features an electronic temperature controller and an innovative KCI touch panel control system. The unit has undergone a comprehensive inspection in our in-house workshop and is fully operational. The pressure boiling kettle is virtually unused and in excellent condition. Our used equipment service for you: • 6 months warranty on all electrical parts • High-quality branded equipment at fair prices • Professional overhaul / inspection & thorough cleaning • Tested & fully functional – or your money back • Flexible options for shipping or collection • Expert advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 certification Technical details: • W x D x H: approx. 100 x 85 x 90 cm • Power connection: V: 400 / kW: 23.1 • Type: FES 150 • Serial no.: 749951 • Year of manufacture: 2015 Condition: Used, fully serviced, fully functional Warranty conditions: Please note that units with a three-phase connection (400V), water connection, and/or gas-powered devices may only be connected by a company certified by the manufacturer! Warranty claims are valid only with submission of the commissioning protocol. Further features: • Usable volume: 155 litres • Low-maintenance, sealed PERMAPRESS system • Device switch, power selection switch • Electronic temperature controllers with setpoint and actual value display • Lid drainage via discharge pipe • Fixed electrical connection • Fill level marking, with 10-litre gradations • Continuous boiling function • RS 485 interface • Standard safety interlock • Double-wall lid, spring-balanced • 4 quick selection options for temperature and cooking time • Water inlet via lid-operated swing arm fitting • Mixing tap with hot and cold water valves • IPX5 Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request Hsdpfev Iku Njx Ad Ren • Shipping to islands or mountain stations only by arrangement If you have any questions, would like advice, or want to inspect the equipment on site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, This is a 115-liter MAGNUM 3/1 GN electric braiser from premium manufacturer MKN, model Optima 850. The braiser is a multifunctional appliance for steaming, boiling, simmering, braising, and roasting. Draining is done via a safety drain valve on the front. The appliance has been tested in our in-house workshop and is fully functional. The braiser has been completely overhauled and is in excellent condition. The stated price is net plus 19% VAT. Our used appliance service for you: • 6-month warranty on all electrical parts Hedpsu S H D Nefx Ad Rjn • High-quality brand-name appliances at fair prices • Professional overhaul/inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or pickup options • Expert advice - before and after purchase • Provision of operating instructions, wiring diagrams & spare parts • Tested according to DGUV V3 Technical specifications: • W x D x H: approx. 1300 x 850 x 850 mm • Inner tank W x D x H: 700 x 540 x 250 mm • Power supply: V: 400 / kW: 19.2 • Serial number: 11203758 • Type: 2022705 • Year of manufacture: 2011 • Nominal capacity: 115 liters Condition: Used, fully Functional Further information: •Multifunctional cooking appliance for steaming, boiling, simmering, braising, and frying •Braising pan made entirely of extremely corrosion-resistant chrome-nickel steel •Frying base made of special sandwich material (MKN PowerBlock), smooth and ground •Heating via SUPRA contact heating elements for optimal heat distribution and short heat-up times •Braising pan with raised rim, tightly welded •High heat capacity ensures even heat transfer and minimal temperature fluctuations when loading the plate with cold food •Equipped with electronic "Eco Control" control as standard •Equipped with a double-walled hinged lid and mixer tap as standard •Drainage via a front-facing safety drain tap Shipping: • Delivery or pickup upon request • Worldwide shipping upon request • Shipping to islands or mountain stations only upon request Do you have questions, would you like advice, or would you like to reserve something? View location? You can reach us by phone during our opening hours: Monday-Friday 9:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 55119214, This is a refrigerated countertop unit from the manufacturer NordCap, which is perfectly suited for insertion under existing cooking blocks or grills. The unit was manufactured by the premium manufacturer Ideal. The refrigerated countertop unit features a built-in stainless steel evaporator and is equipped with four full-extension drawers. The usable height is 90 mm per drawer. Two identical units are for sale. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The unit was only in use for six months and was stored until the end of operation. Used condition is very good. The RRP is €5,900 net. The stated price is net plus 19% VAT. Our used appliance service for you: •6-month warranty on all electrical parts •High-quality brand-name appliances at fair prices •Professional overhaul/inspection & expert cleaning •Tested & fully functional - or your money back •Shipping or pickup available •Expert advice - before and after purchase •Provision of operating instructions, wiring diagrams & spare parts •Tested according to DGUV V3 Technical specifications: •W x D x H: approx. 1380 x 660 x 410 mm •Power supply: V: 230 / kW: 0.265 •Serial number: 460923-80034645-001 •Year of manufacture: 2019 Condition: used, serviced, fully functional Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain resorts only by arrangement Hodpfxovga Dqo Ad Ron Do you have questions, require advice, or would like to view something in person? You can reach us by phone during our opening hours: Monday-Friday 9:00 AM - 1:00 PM and 2:00 PM - 5:00 PM.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: ET1PA23085067157, This is an Ultravent Plus hood from the manufacturer Rational, type UV PLUS 61/101/E, manufactured in 2023. It is suitable for the following Index series: Index H and I, as well as for DUO appliances or individual units. This hood not only captures escaping vapors but also eliminates odors and smoke. You do not need an exhaust duct to the outside. An LED lamp automatically indicates when you need to change the filter. This model features stainless steel baffle filters and a pre-filter mat located behind them. This protects the activated carbon filter, which is the heart of the hood, from becoming contaminated too quickly and ensures optimal functionality. This Plus condensation hood can be optimally used in the front area, in enclosed spaces, or during show cooking. Retrofitting and installation on Rational SCC 61/101 WE units can be carried out with little effort. The hood has been inspected in our in-house workshop, and new ACTIVATED CARBON FILTERS have been installed. Fully functional with a 6-month warranty. Immediately available, list price approx. €9,000 gross. Our special price: €4,998 gross. Hjdpfswmdkmjx Ad Ron You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 854 x 1226 x 628 mm Minimum dimensions of the door opening for transport: W x H: 845x850mm Serial number: ET1PA23085067157 Year of manufacture: 2023 Power connection: V: 200 - 240 / Hz: 50-60 Weight: approx. 95 kg Condition: Used, inspected, fully functional. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are exclusively subject to our general terms and conditions (GTC).

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Hjdpfx Adey S Ru Aj Rjn Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Hsdpfoy S Rtljx Ad Rsn Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Hodpfxey S Rqwo Ad Ren Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: used, functionality: fully functional, Year of construction: 2007, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 1,960 mm, fuel type: diesel, mast type: duplex, construction height: 3,860 mm, fork carriage width: 1,600 mm, fork length: 1,700 mm, empty load weight: 27,300 kg, total length: 6,050 mm, drive type: Diesel, construction width: 2,800 mm, Side loader Load center: 800 Fork width: 460 mm Fork thickness: 90 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Rear tire type: Pneumatic Rear tire size: 14.00-24 Hjdsy U R Arspfx Ad Rjn Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GCS180/18-17/40SFH. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for sale on consignment. Telescopic forks: 1700 / 2900 mm Heater, full cab, full free lift

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 3,033 h, load capacity: 8,000 kg, lifting height: 4,730 mm, free lift: 2,140 mm, fuel type: gas, mast type: duplex, construction height: 3,380 mm, fork carriage width: 1,620 mm, fork length: 1,600 mm, empty load weight: 12,500 kg, total length: 3,050 mm, drive type: Treibgas, construction width: 2,750 mm, Four-way side loader Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Hodpfx Ajy E Uvwed Ren Front tires type: Superelastic Front tires size: 400/60-15 Rear tires type: Superelastic Rear tires size: 23x10-12 Description: In addition to this Combilift model, we have around 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Hire purchase and financing under favorable conditions are always possible. We are also happy to purchase your used machine outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this C8000. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modification for forklifts from 8 tonnes. We are also happy to sell your vehicle on consignment. Side shift fork positioner, Fork positioner opening range: 395 / 1,510 mm Heater, full cabin, full free lift, Platform height: 740 mm

Condition: refurbished (used), - NEW Eddy current separator, Wagner type - with vibrating feeder - feeder width 1200 mm Hedpfxezap Hxs Ad Rsn - overhauled condition

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), color: blue, overall weight: 674 kg, Year of construction: 2018, Submersible pump with helical turbine, suitable for pumping wastewater. The pump is mounted in a cathedral-type frame with base, discharge elbow, and equipped with a 20-meter power cable. The pumps have been overhauled. Two pumps are available for sale; the listed price is per unit. Hedpsx Sdtrjfx Ad Rjn (See technical datasheet in the photos) Four-pole oil-bath motor allowing dry-running operation. Max flow rate: 490 m³/h Max head: 25 m Power supply: three-phase 400V Power: 30 kW

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn turning diameter: 1.140 mm turning lenght: 4.200 mm turning diameter over slide: 800 mm faceplate diameter max.: 1.000 mm Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle spindle bore: 120 mm spindle diameter in front bearing: 190 mm Hjdpfezacdksx Ad Rsn Accessories 1 piece fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007.

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 45,000 kg, empty load weight: 4,200 kg, total length: 10,000 mm, Accessories Mast type: None Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Hodpfx Adeu Dzv Ho Rsn

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 19,892 h, load capacity: 6,000 kg, lifting height: 6,300 mm, free lift: 1,840 mm, fuel type: diesel, mast type: triplex, construction height: 2,980 mm, fork carriage width: 1,560 mm, fork length: 1,400 mm, empty load weight: 10,284 kg, total length: 5,150 mm, drive type: Diesel, construction width: 2,200 mm, Side loader Load center: 700 Fork width: 250 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: normal Front tire type: Pneumatic Front tire size: 3.00-15 Rear tire type: Pneumatic Rear tire size: 3.00-15 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options are available to us at any time. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GS60/14/63TR. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and special construction for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Fork positioner, Hodpfxjy Uz R Ho Ad Ron Fork positioner opening range: 605 / 1450 mm; 1x NIVO fork Heater, full cabin, full free lift

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. Hedeyzt Dlepfx Ad Ron A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), -Dimensions: 700x600x1300mm -Model: PH401 -Serial Number: 78635 -Tank capacity: 40L -3 speeds -Supplied with pallet -Year: 04-1997 Power: 2.2kW -Voltage: 400V Hodpfx Adewxv T Rj Ron -Overhauled equipment: The equipment is prepared upon order, pick-up and return

Condition: excellent (used), -Model: PH601 -Serial: 74094 -Year: 08-1996 -Bowl 60 litres: whisk + paddle + hook -Emergency stop button -Start button -3 speeds Hjdpfowxv Uuox Ad Rjn -Voltage: 400V -Power: 2.6kW -Overhauled equipment: the equipment is prepared upon order, handover and return deadlines are agreed at that time (please request the price after overhaul)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 18,542 h, load capacity: 10,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, fork carriage width: 2,500 mm, fork length: 2,000 mm, empty load weight: 18,160 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,600 mm, Diesel forklift Load center: 1200 mm Fork width: 220 mm Hjdsy E Uv Dspfx Ad Rjn Fork thickness: 90 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Pneumatic Front tire size: 11.00-20 Rear tire type: Pneumatic Rear tire size: 11.00-20 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing and financing at attractive terms are always possible. We are also happy to purchase your used machine directly, even without you buying a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this DCG100-12. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons. We can also sell your vehicle on consignment at our facility. Sideshift, fork positioner, Heater, full cab,

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Hjdpfx Adeyp Nykj Ren Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Platform height: 880 mm

Condition: excellent (used), Year of construction: 2019, General information Field of application: Construction Reference number: 6 Weights Empty weight: 300 kg Functional Dimensions of cargo space: 120 x 80 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 4,5 t - 9 t Reconditioned: Yes Hsdpfx Asx Ezl Sod Rjn Delivery terms: EXW Working pressure: 100-150 bar Required hydraulic flow: 80 l/min Strike count: 600-1400 Latest inspection: 2025-05-05 Production country: DE Additional information Please contact Ö. Inalkac for more information Epiroc SB302 general overhauled/GENERALÜBERHOLT in top condition. This SB302 is with following NEW parts: Seal Kit, diaphragm, retainer pins, stop pin, bushing, chisel/tool, hoses and new painted. Atlas Copco, SB202, SB300

Condition: ready for operation (used), Yaskawa CIMR-F7U4030 frequency inverter SN:1W0387321490020, professionally fully overhauled and tested, comes with a 24-month warranty, 100% functional, delivery contents as shown in the photos Hjdpfx Adsy S Nm Rj Rsn

Condition: used, functionality: fully functional, machine/vehicle number: T331051593, Year of construction: 2006, operating hours: 5,323 h, load capacity: 16,000 kg, lifting height: 3,980 mm, fuel type: diesel, mast type: simplex, construction height: 3,920 mm, power: 147 kW (199.86 HP), fork carriage width: 2,950 mm, fork length: 2,400 mm, empty load weight: 24,300 kg, drive type: Diesel, construction width: 2,950 mm, Heavy-duty forklift - diesel Chassis number: T331051593 Load center: 1200 Fork width: 250 mm Fork thickness: 100 mm ISO class: Terminal West Mast type: Standard Transmission: Dana Clark 342TE13310-20 Condition: Operational and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 12.00-20 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 12.00-20 Rear tires condition: 20 - 40% Description: Overhauled transmission with warranty (repaired for €17,000.00) 2,950 mm wide fork carriage Side shifter, fork positioner, 3rd valve, 4th valve, front work lights, heater, fully enclosed cab, Hjdpfx Ajyy Effed Ron