Used Hatebur Hot Nut Former for sale (4,376)

Condition: used, Straightening and welding plate, steel cast iron / grey cast iron, heavily ribbed former marking-out and measuring plate heavy-duty straightening plate Iodjdzqrpspfx Aa Ioth length 1000 mm width 800 mm thickness 250 mm working height 820 mm plate thickness 30 mm throughout – height-adjustable metal base weight approx. 400 kg surface slightly rusted

Condition: used, SIEGFRIED WEYRAUCH Gemmingen straightening and welding plate Heavy ribbed cast steel/grey cast iron Former marking and measuring plate Heavy-duty straightening plate Length: 1000 mm Iedpfx Aed N H Dbja Ioth Width: 800 mm Thickness: 28/125 mm Working height: approx. 850 mm - Feet with leveling screws for plate alignment Weight: 370 kg Good surface condition

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Itedpfjdz Sq Eox Aa Ijh Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Ijdpfxsyzt D Ee Aa Isth Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: excellent (used), Binder Type: Binder CB 210 CO² / 9140-0013 Iodorp Enbjpfx Aa Ijth Technical data Temperature range 7 °C above room temperature to 60 °C MB1 controller for temperature and CO2 concentration Interior volume: 210 liters External dimensions (W x H x D): 740 x 1069 x 715 mm Internal dimensions (W x H x D): 560 x 750 x 500 mm Weight: approx. 121 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: silver, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, trailer coupling, TICAB HB 2 Asphalt Hot Box | Thermal Container for Hot Mix Transport With premium insulation and an advanced diesel heating system, it ensures consistent mix quality for superior patching, resurfacing, and pavement rehabilitation. The TICAB HB 2 is a professional thermal hot box engineered to transport and hold hot mix asphalt at working temperature from the plant to the job site with minimal heat loss. Key Features High-efficiency thermal container with premium mineral wool insulation — heat retention up to 12 hours Beckett diesel heating system with automatic temperature control for stable mix temperature in cold weather Mountable on a truck body or trailer frame for flexible job-site mobility Heavy-duty construction for municipal roads, highways, parking lots, bike paths, driveways, and industrial areas Hydraulic lift unloading system and top loading hatch for fast loading and easy discharge Capacity: ~1.5–1.8 m³ (up to ~4 tons of hot asphalt) — ideal for medium to large repairs Applications Road and highway repair and maintenance Pothole patching and resurfacing Hot mix asphalt transport and thermal storage Pavement rehabilitation and paving preparation Supplying hot mix to asphalt pavers on site Why Choose the TICAB HB 2 Reliable temperature control, excellent insulation, and operator-friendly design make the HB 2 a dependable solution for contractors, paving companies, and municipalities that demand consistent hot mix quality and efficient road repair workflows. Itjdpfx Aasx Uqt Re Ish Contact us today for pricing, delivery options, warranty details, and full technical specifications. Ready for immediate deployment to boost your asphalt repair productivity.

Condition: like new (used), Martin Quick-Clamping Nut for 40mm Milling Arbor. Itedpfownnauox Aa Ish From stock, apparently has never been used. The quick-clamping nut is used for the T27. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Iedpfxoxx Tmrs Aa Ioth Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Itjdpfx Aoxx Ti Tja Ijh Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device -Indramat: AC Servo Line Former from DMT CD320 cycle lathe -Type: NAM 1.2-15 -Item: 246506 K39/96 -Dimension: 325/105/H390 mm -Weight: 21 kg Iodpfx Ajn Tvcdsa Ioth

Condition: good (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod Isdpecp Anmsfx Aa Ioth -Manufacturer: Rexroth -Type: 102553 -Type: 2492458 -Thread diameter: 48 mm -Thread pitch: 30 mm -Total length: 2285 mm -Weight: 34 kg

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos Itedpeqddi Ujfx Aa Ioh -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Line Former NAM 1.2-08 -Component: from a DMT CD 480 lathe Itedpfofrlt Hox Aa Ijh -Dimensions: 320/105/H390 mm -Weight: 12.9 kg

Condition: used, Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: Drilling machine table Milling machine table T-slot table -Table surface: 800 x 550 mm, height 195 mm Itsdsul H Euepfx Aa Ijh -Groove width: 28 mm, groove spacing 250 mm -Dimensions: see photo technical drawing -Total dimensions: 800/550/H195 mm -Weight: 630 kg

Condition: used, Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece Iedpfx Aaod Iqqdj Isth -Weight: 6.3 kg

Condition: excellent (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused Itsdod Iqqiepfx Aa Ieh -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg Itsdpfehubc Nsx Aa Ish

Condition: used, Bolts, Hex Bolts, Flange Nuts, Hex Nuts, Flange Nuts, Solar Fasteners -Hexagon screws/hex nuts: M 10 stainless steel 242 kg -Hexagon head screws: DIN 933 M10-1.5 x 100 1000 pieces / M10 x 60 2100 pieces. Iodsq Nqxtspfx Aa Isth -Hexagonal nut: self-locking type M10 DIN 982 2700 pieces. -Hexagon nut: with flange and locking teeth M10 SW15 Din 6923 800 pieces -Price: complete -Transport dimensions: 1200/800/H230 mm -Total weight: 242 kg

Condition: good (used), Screws, hexagon screws, flange nuts, hex nuts, collar nuts Isdpsirnv Nofx Aa Isth -Hex nuts: M8 to M30 645 kg -Sizes/Quantity: see photo parts list Price: complete Total weight: 645 kg

Condition: used, Bolts, hex bolts, flange nuts, hex nuts, collar nuts -Hexagon nuts: M 20 flange nuts with locking teeth 3650 pieces -Type: DIN 6923-8 A2L M20 SERR Itedpfx Ajirnwfea Ieh -Price: complete -Total weight: 355 kg

Condition: excellent (used), Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm Isdpfjd Iqqhox Aa Isth -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 400 x 250 mm -Y-axis: 95 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 16 mm, groove spacing 63 mm -Total dimensions: 455/400/H140 mm -Weight: 40 kg Iedpfx Aasqddi Ao Isth

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table -Table surface: 300 x 300 mm -Y-axis: 50 mm movable, rotary wheel with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 80 mm -Total dimensions: 420/330/H90 mm Iedpfx Aasqddkve Ijth -Weight: 48 kg

Condition: good (used), Temperature controller, tempering device, temperature control device, modular tempering device, tool heating, hot runner control device -Manufacturer: Ewikon, temperature control unit hot runner control unit -Type: 66010.100D -Power: V:625 VA / 230V: 3 kVA -Transport dimensions: 450/350/H230 mm Iodpfx Asvn Iqhsa Ieth -Weight: 15 kg

Condition: ready for operation (used), Year of construction: 1970, Heidelberg GTS Hot Foil Very good condition Available immediately Itjdpfxozcdfne Aa Ish