Used Hansa-Flex Hd240T 1 1/2" for sale (106,484)

Condition: like new (used), This Nordson ProBlue 4-2 glue unit is truly like new, suitable for 2 glue hoses but can also be expanded to 4 glue hoses at an additional cost. Gbjdpfxjw A Sdgo Afkon

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm Gbjdpfx Aeuxfu Nefksn - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: new, Year of construction: 2025, Folding bench ZGR2000/1.2 of company prod - masz locally to the try out and equal to the take. You get professional instruction on the spot. Working width 2140 mm Sheet thickness up to 1, 2 mm Bending angle up to 145° Gbsdspa Um Ijpfx Afkjn -Forward: 80 mm Gas pressure spring Scala of degree of Velocity for preset bending angle Hanger depth stop Tray for sheets Weight approx. 250kg Accessories - Rollenschere(bis 0,8mm) 350EUR Shipping within Germany 180EUR All prices are inclusive of value added tax. Certificate CE Warranty: 12 months Pickup Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on demand

Condition: excellent (used), Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, switching-on valve -Type: MS6-EE-1/2-V24-S 527682 -Operating pressure: 4 - 18 bar -Quantity: 1x valve available -Dimensions: 180/100/H290 mm -Weight: 1.3 kg Gsdex R R Iaepfx Afkjbn

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valve: MS6-EM1-1/2 -Filter control valve: M56-LFR-1/2-D7-ERM-AS -Switching valves: M56-EE-1/2-V24 M56-EE-1/2-V24-S -Pressure build-up valve: M56-DL-1/2 -Branch module: M56-FRM-1/2-Y -Individual components: see photos -Number: 3x maintenance unit available -Price/Distribution: per piece, complete unit Gbsdpfx Ajx Ryiaefken -Dimensions: 440/120/H340 mm -Weight: 5.2 kg/pc.

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D6-CRV-AS -Branch modules: M56-FRM-1/2-Y -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos -Price/Fee: complete -Overall dimensions: 440/340/H110 mm -Weight: 5.3 kg Gbodpfx Afjx Rx S Tokjn

Condition: excellent (used), Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 2/1 A2/A2-NA-TT BLUE -Article number: 900360 -Width: 50 mm -Length: 48,000 mm -Quantity: 1 conveyor belt available -Dimensions: Ø 300 x 50 mm Godpfeirnv Tjx Afkobn -Weight: 2.3 kg

Condition: good (used), Threaded fitting, malleable cast iron thread fitting, elbow fitting, pipe angle fitting, pipe angle, threaded fitting, malleable cast iron threaded fitting -Manufacturer: Sanha, malleable iron threaded fitting elbow fitting 89 pieces -Size: 90° 1 1/2" -Order No.:. 12979-1 Art. 97 -Price: complete -Total weight: 134 kg Gbjdpfx Afeirnwiskon

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 2/1 A2/A2-NA-TT beige Gbodpfxjirnwuo Afkjn -Width: 60 mm -Length: approx. 50,000 mm -Thickness: 1 mm -Number: 1x conveyor belt available -Price per piece -Transport dimension: Ø 305 x 60 mm -Weight: 2.9 kg/pc.

Condition: used, gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor Gedpfx Aouxg Nbjfkjbn -Manufacturer: Lenze HEW, adjustable geared motor -Adjustable gear: Lenze type 11 333 13 16 2 18-3.7 rpm -Gearbox: Lenze Type 12 603 16 1 1 -Engine HEW type: EEXF 80L/4 0.75 kW -Shaft: Ø 40 x 80 mm -Design: B3 -Protection class: IP 54 -Dimensions: 680/490/H320 mm -Weight: 66 kg

Condition: excellent (used), Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket Gbedpfx Ajv Ukxuofksn -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4" x 3/4" -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

Condition: good (used), Gearboxes, spur gears, angle gears, worm gears, bevel gears -Manufacturer: Poggi, gearboxes, bevel gears -Translation: 1:2 -Shafts: Ø 24 x 50 mm Godpexbdktefx Afkebn -Number: 1x gearbox available -Price: per piece -Dimensions: 252/245/H85 mm -Weight: 4.7 kg

Condition: used, Filter bowl, pneumatic filter, filter regulator Gsdpfx Afjfvqvgsksbn -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück

Condition: used, Spiral wound gasket, labyrinth body gasket, flange gasket Gsdsiqu Shspfx Afksbn -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2" 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg

Condition: used, Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2" -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available Gbodeirf Eyjpfx Afken -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc.

Condition: used, Rubber protective mats, conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, conveyor belt type E 2/1 A2/A2-NA-TT beige Gbedpfx Aoirnwmjfkjn -Item: 900361 -Width: 50 mm -Length: 25,000 mm -Number: 2x conveyor belt available -Price per piece -Transport dimension: Ø 235 x 50 mm -Weight: 1.1 kg/pc.

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus Gbodpfswq Nvijx Afkon -Manufacturer: Rems, thread cutting head -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm -Weight: 50 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine type 535 -Pipe size: 1/8 to 2 inches Gbedpswub Eksfx Afken -Spindle bore: Ø 64 mm -Operating voltage: 230 volts -Dimensions: 1080/700/H1140 mm -Weight: 128 kg

Condition: used, Hydraulic filter, filter element, high pressure filter -Manufacturer: Parker, high-pressure filter with clogging indicator / filter unit with 2 filters -Type: O-28P-1-10Q-M2-98-C2C2-1-1 / 0-24P-1-40W-M-1-2 -Number: 6x filter unit available -Price per unit -Dimension: 380/150/H250 mm -Weight: 20 kg/pc. Godpfsmv T Hqex Afkebn

Condition: good (used), Gearbox, spur gear, worm gear Gbjdst Trwropfx Afkon -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg

Year of construction: 2006, condition: good (used), Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, roller trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Stahl, electric chain hoist with powered chassis -Equipment: without pendant control, without own control -Crane chassis: Type SU-A 1442 110 electrically driven -Beam width 130 to max. 165 mm -Chain hoist: Type ST 2008-16/4 2/1 -Load capacity: 1500 kg -Main stroke: 8 m/min -Fine stroke: 2 m/min -Chain length: 4.5 m -Dimensions: see photo technical drawing -Transport dimensions: 1350/1030/H1000 mm Gbedpfx Aeikwg Iofksn -Weight: 139 kg

Condition: good (used), Profile bending machine, bending machine, pipe bending tool -Handover: in the current condition as viewed -Accessories: 1 damaged pressing tool: 3/4", see photos -suitable for: pipe size 1/2" to 1 1/2" -Dimensions: 630/670/H440 mm Gbsdpfxjgrzvgo Afkjn -Weight: 36 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve Godpfxjb A Rino Afkebn -Manufacturer: Festo -Type: NVF3-MOH-5/2-K-1/4-EX -PN: 2-10 bar -Number: 2 valves available Price: per piece -Weight: 0.3 kg

Condition: good (used), frequency monitor, speed and frequency monitor, frequency monitoring, frequency monitoring -Type: FW4-2-120-400-1 Gbjdpfjb A Saqex Afksn -Un: 120 VAC -Fn: 400 Hz -Number: 1x frequency monitors available -Price: per piece -Weight: 0.8 kg

Condition: good (used), Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears Gedpfxefbtgmj Afkebn -Translation: 2: 1 -Drive shaft: Ø 25 x 45 mm -Price: per piece -Number: 4 pieces -Dimensions: 240/120/H235 mm -Weight: 13.15 kg