Used Haenchen 120 10.000 00 for sale (40,771)

Year of construction: 2022, condition: as good as new (ex-display), Welding turntable, Protec KT 1200 Kg Motor-driven, steplessly adjustable for tilting and rotation speed Motor: 0.75 kW With remote control Foot switch Table diameter: 1200 mm Chjdpfxjcrmyfs Ad Ioc Height: 1000 mm Length: 1400 mm Width: 1500 mm Speed: 0.05 to 0.5 rpm

Condition: excellent (used), Year of construction: 2011, pivoting range: 360 °, Welding manipulator SARTORE - PTA 12000 MACH-ID 9321 Make: SARTORE Type: PTA 12000 Year: 2011 Vario matic Rotation / Angle Remote control with Dro Very littles used incl. 2000 mm false chuck  CE-Marked  Table Ø: 2000mm Table load on 50 mm: 12000 Chsdpfx Adjx H Rhxj Isc Table load on 200 mm:10000 Table load on 400 mm:6600 Table load on 600 mm:4500 Table load on 1000 mm:3500 Rotation table: 360° Lifting chuck: 0 - 135° Table rotation: 0,02 - 0,4U/mm Length: 2980mm Width: 1980mm Height: 1800mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 50,958 km, power: 177 kW (240.65 HP), first registration: 10/1993, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total length: 7,200 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, +++ Exceptionally clean vehicle with original 50,958 km +++ Water tank 1200l +++ Rear pump 16/8 Chjdpfx Adjz Amn Do Iec Superstructure: Schlingmann All-wheel drive 4x4 with 2x differential locks, center and rear, ABS Manual lighting mast with 2x 1000W Wheelbase 3640 mm Maximum speed Vmax according to documents 92 km/h, according to GPS: 95 km/h Recent inspection completed, including lubrication and new fuel filter as well as new air dryer cartridge +++ Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 2008, operating hours: 10,000 h, functionality: limited functionality, overall weight: 6,000 kg, rotor diameter: 400 mm, number of blades: 20, total length: 3,500 mm, total height: 2,300 mm, total width: 1,500 mm, rotor width: 1,200 mm, power: 75 kW (101.97 HP), type of input current: DC, rotational speed (max.): 82 rpm, input voltage: 400 V, CMG 1200 shredder for sale. Chodpfx Aez Ag Hyjd Ioc

Year of construction: 2018, operating hours: 1,662 h, condition: used, Dynapac F1200 CS Model: Year of manufacture: 2018 Operating hours: 1,662 h Paving capacity: 250 t/h Engine: Deutz, 4-cylinder TD 2.9 L4, [54 kW / 73 hp] Fuel tank: 85 l Chassis: Hydraulic track drive Max. paving speed: 27 m/min Transport speed: 3.3 km/h Hopper: Mixing material hopper, hopper capacity 2.3 m³ Hopper length: 1,310 mm Width: / Filling height: / Truck docking push rollers included Conveyor system: Split, reversible scraper conveyor with center cover and automatic control via limit switches Width of 650 mm, controlled by a single drive system Paving beams: V240TV or V240TVE Base width: 1,200 mm Max. width: 3,100 mm Dimensions: Length: 4,360 mm Width: 1,200 mm (base width/transport width) Height: 1,900 mm Weight: 5,800 kg Includes extensions / beam Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! Dynapac F1200 CS Model: Year of manufacture: 2018 Operating hours: 1,662 h Paving capacity: 250 t/h Engine: Deutz, 4-cylinder TD 2.9 L4, [54 kW / 72 hp] Fuel tank: 85 L Chassis: Hydraulic track drive Max. paving speed: 27 m/min Transport speed: 3.3 km/h Hopper: Material hopper, capacity 2.3 m³ Hopper length: 1,310 mm Width: / Filling height: / Truck-mounted push rollers included Conveyor unit: Split, reversible scraper belt conveyor unit with center cover and automatic control via limit switches Width of 650 mm, controlled by a single drive system Paving beams: V240TV or V240TVE Base width: 1,200 mm Max. width: 3,100 mm Dimensions: Length: 4,360 mm Width: 1,200 mm (base width/transport width) Height: 1,900 mm Csdpfxezwlv Ae Ad Iohc Weight: 5,800 kg Includes extensions / beam Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! - = Further information = Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2000, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg INJECTION UNIT (610) Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1598 bar Stroke volume: 399 cm³ Shot weight (PS): 360 g Max. dosing stroke: 203 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 14.8 kW INJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Chjdsz D U Hbepfx Ad Ioc Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l

Condition: good (used), Year of construction: 2005, clamping force: 27,000 kN, Equipment: documentation/manual, KraussMaffei KM 2700 MX – SP 12000 / Screw Ø120 mm MC5 controll Clamping Unit * Clamping force: 27,000 kN / 2,700 t * Mold opening force: 1,890 kN * Moving platen force, opening/closing: 342 / 294 kN * Platen dimensions: 3,020 × 2,600 mm * Distance between tie bars (H × V): 2,100 × 1,700 mm * Opening stroke: 3,000 mm * Mold height min./max.: 900 / 2,000 mm * Maximum daylight: 3,900 mm * Ejector stroke: 400 mm * Ejector force forward/backward: 400 / 200 kN Injection Unit – SP 12000 Screw diameter: 120 mm Csdsznwt Iepfx Ad Iohc * L/D ratio: 23 * Maximum injection pressure: 1,758 bar * Stroke volume: 6,786 cm³ * Shot weight PS: 6,175 g * Injection flow rate: 1,118 cm³/s * Screw speed nominal/max.: 100 / 141 rpm * Plasticizing rate PS at nominal speed: 169 g/s * Plasticizing rate PE at nominal speed: 131 g/s * Plasticizing rate PS at maximum speed: 239 g/s * Plasticizing rate PE at maximum speed: 184 g/s * Nozzle contact force: 166 kN Electro-Hydraulic Equipment * Pump motor rated power: 132 kW * Installed heating capacity: 84 kW * Barrel heating/control zones: 7 * Dry cycle rate according to Euromap 6: 356 cycles/h * Dry cycle time according to Euromap 6: 10.1 s * Oil tank capacity: 2,440 l Dimensions & Weight * Net weight incl. control cabinet: 168 t * Dimensions (L × W × H): 14.73 × 5.03 × 3.74 m * Maximum mold weight: 72,000 kg With Electric Screw Drive * Screw drive power: 147 kW * Screw speed nominal/max.: 100 / 158 rpm * Plasticizing rate PS nominal: 178 g/s * Plasticizing rate PE nominal: 137 g/s * Plasticizing rate PS maximum: 267 g/s * Plasticizing rate PE maximum: 206 g/s With Accumulator (ZE) Injection flow rate: 1,696 cm³/s Equipment: 4 cores hydraulic - moving platen 16 hydraulic cascades 6 pneumatic cascades Hotrunnrer controllers: 48 removable tie bar Software for Extrusion

Condition: used, Year of construction: 2009, operating hours: 3,483 h, functionality: fully functional, total length: 5,550 mm, total width: 2,250 mm, bar diameter (max.): 95 mm, overall weight: 8,400 kg, Max. workable diameter from bar mm 95 Max. workable diameter from recovery mm 500 Max. workable length mm 1250 Max. rotating diameter mm 700 MAIN ELECTROSPINDLE: Variable rotation range rpm 40-2800 ASA spindle nose 8" Spindle hole mm 111 Internal diameter of bearings mm 150 Self-centering diameter mm 315 Motor power kW 30 TAILSTOCK TO FOLLOW: Positioning stroke mm 1,100 Quilt stroke mm 150 Quilt diameter mm 115 MOTORIZED ELECTROSPINDLE HEAD: Type of attachment HSK-63 Max. revolutions RPM 6,000 Electrospindle motor power Kw 9 B AXIS UNIT: Total rotation range 205° Rotation range beyond the tailstock axis 15° Rotation range beyond the spindle axis 10° Angular position with mechanical block Every 5° CROSS SLIDE Max. Z stroke mm 1300 Max. X stroke mm 520 Cedpsvv Ud Rsfx Ad Ishc Max. stroke Y mm 210 (+120 – 90) TOOL MAGAZINE Magazine capacity 40 pos Max. diameter of tools with adjacent tools mm 80 Max. diameter of tools without adjacent tools mm 140

Condition: used, mileage: 795,194 km, power: 338 kW (459.55 HP), first registration: 12/2018, fuel type: diesel, empty load weight: 12,560 kg, maximum load weight: 13,440 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, loading space volume: 41 m³, loading space length: 7,600 mm, loading space width: 2,474 mm, loading space height: 2,193 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, trailer coupling, MAN TGS 26.460 with Thermo King refrigeration - Frozen goods box body - Dimensions (LxWxH, internal): 7.60 x 2.47 x 2.19 m - Refrigeration unit: Thermo King UT 1200 - Power connection - Temperature recorder - Air conditioning - Tail lift - Navigation system - Automatic gearbox - Full air suspension - Cruise control - Payload: 13,440 kg - Tires: 385/55R22.5 - 315/70R22.5 In very good condition! German vehicle! Export price! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, therefore you will generally find the export price in our listings, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be viewed as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase agreement are decisive. Subject to changes, errors, typographical errors and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English Chjdozk A D Depfx Ad Iec - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Year of construction: 2017, condition: like new (used), functionality: fully functional, SEALPAC A7 + SEALPAC AS-LS 1200 ID.NO. 2811 Sealpac A7 with Sealpac AS-LS 1200 Trough dispenser year mod 2017 absolutely new condition only driven 4792 troughs. Associated vacuum pump. Trough size 224 x 175 mm. Available for immediate delivery. Dimensions 920 x 90 cm Height 210 cm. Cedsumbwbspfx Ad Iehc

Condition: used, mileage: 299,811 km, power: 213 kW (289.60 HP), first registration: 02/2019, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 38 m³, loading space length: 6,630 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2019, Equipment: ABS, air conditioning, navigation system, soot filter, tail-lift, TGM 16.290 BL refrigerated box body, 7.90 m with doors + 1.5-ton tail lift. * THERMOKING T-1200 R (diesel engine) and auxiliary cooling unit, 380 V ELECTRIC * Body: KIESLING with ATP certificate FRC 12-2024 + temperature recorder * Permissible total weight 16,000 kg = payload approx. 6,690 kg * Partition can be removed! * Vehicle number for customer inquiries: 4665 * Engine type Euro VI * Truck navigation system * Air conditioning * Distance control assistant * Lane departure warning system * Environmental badge (green) * Tail lift * Air suspension, rear axle * Air-suspended front axle * Anti-lock braking system (ABS) * Exterior sun visor, transparent * Particle filter * Rear view camera * Cruise control * Hill start assist * Electric windows, driver and passenger door * Central locking * Two-seater * Digital tachograph, EC, speed, without ADR * AdBlue tank 35 l * Engine brake, pneumatically operated * Seat heating for driver * Driver's seat, air-suspended * Service book maintained * 2/3-door No liability for printing and typographical errors Sale only to commercial businesses Subject to errors and prior sale* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract is decisive. * TOP SERVICE + QUALITY * We will gladly provide you with a LEASING-FINANCING-RENT-TO-OWN offer Guarantee insurance possible upon request from the insurance company * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ.) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. Chsdjy H Tclopfx Ad Ioc * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WhatsApp number * ---- Visit us on our website at: * Constantly over 200 vehicles in stock

Condition: used, mileage: 34,595 km, power: 177 kW (240.65 HP), first registration: 09/1999, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, total length: 7,400 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, Well-maintained fire engine LF16/12 on an Iveco Eurofire FF 135 E 24 chassis. Codpfxsz D N Nqj Ad Ishc Superstructure by Magirus +++ Water tank 1200 l +++ Rear-mounted Magirus 16/8 pump with 315 operating hours. All-wheel drive 4x4 with off-road reduction gear, 2x differential lock (center and rear), snow chains on the rear. Extendable light mast at the front of the superstructure and hose reel at the rear. Special warning system, extendable light mast at the front of the superstructure, ambient lighting, snow chains. Analog radio, radio, electric mirrors. Ready for operation, including a recent inspection and lubrication; starter batteries have been replaced. +++ Errors, changes, and prior sale reserved.

Condition: good (used), Year of construction: 2016, operating hours: 8,884 h, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, fork length: 950 mm, front tire size: 413 X 178 X 286, rear tire size: 457 X 152 X 308, total height: 3,120 mm, total length: 2,500 mm, total width: 1,200 mm, color: other, Year of manufacture: 2016 Front tyre size: 413 X 178 X 286 Rear tyre size: 457 X 152 X 308 Lifting capacity: 2.000 kg CE mark: yes Technical condition: good = Additional options and accessories = - Sideshift = Remarks = Flexi Bendi AC1200 – Year of construction 2016 – 8884 hours 6.6 meter lifting height – Electric narrow aisle truck with side shift Chedpfsydpq Esx Ad Isc Are you looking for an agile and reliable narrow aisle truck for warehouse applications? This Flexi Bendi AC1200 from 2016 with 8884 hours on the counter is electrically powered and equipped with a 48V battery. Thanks to the compact construction, triplex mast and sideshift, this truck is perfect for use in narrow aisles. The lifting height is 6.6 meters and the lifting capacity is 2000 kg. The machine is in good condition, is CE-certified and equipped with non-marking tires. Battery charger is not included. Specifications: Year of construction: 2016 Hours: 8884 hours Battery: 48V Lifting height: 6.6 meters Clearance height: 3.12 meters Mast: Triplex Lifting capacity: 2000 kg Drive: 2x4 Attachments: Sideshift Weight: 5,713 kg Non-marking tires CE certified Price excluding VAT For more pictures and videos please visit our website. Contact us for availability or a viewing.

Condition: new, Year of construction: 2026, warranty duration: 12 months, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Cjdov Ip Uzepfx Ad Ijhc Total Optimization, High Precision, and Maximum Speed in One Tool TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips.

Condition: new, Year of construction: 2026, functionality: fully functional, Maximize Profit with TRV 1200L and TRV 1600L: From Sawmill to Firewood TRV 1200L Ø550: Efficiency and Speed for Continuous Cutting Optimize waste management and turn production scraps into immediate economic value! The TRV 1200L Ø550, with its advanced design, is the ideal solution for sawmills needing to dispose of large amounts of multilaminate trims and log side sections. The result? A continuous and automated disposal process that converts waste into high-quality firewood. Key Features: Chjdev Ip T Repfx Ad Iec Simplified handling: randomly load trims and waste onto the low-wear conveyor/roller VV. Smart clamping system: innovative technology allows processing of overlapping pieces of different shapes and thicknesses. Advanced precision: PLC-automated cutting system with timed length control of trimmed pieces. Independent sectors: equipped with 5 sectors, each with its own pneumatic cylinder and shock absorbers for maximum stability. Enhanced Safety: Advanced protection system: access door to moving parts with forced-lock safety micro-switch. Sealed, non-duplicable security key for exclusive access. Protective tunnel with sealed key and reinforced blade guard for superior safety. Rapid blade motor stop (

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 8,964 h, load capacity: 1,400 kg, lifting height: 4,100 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 1,910 mm, battery capacity: 500 Ah, battery voltage: 48 V, fork length: 100,401,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,215 kg, total height: 1,910 mm, total length: 1,900 mm, total width: 1,090 mm, fuel: electricity, Equipment: sideshift, LINDE E 14-01 2009 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 4.100 mm Closed height: 1.910 mm Free lift: 1.400 mm Mast: Triplex (3F410) Fork length: 100.401.200 mm Fork carriage: 2B Drive: Elektro Battery: 48V/500 Ah -1600247 (2020) Charger: Sonstiges Ladegerät Still Ecotron Wsa 48V/80 A . Tyres: Superelastik (weiß) 18x7-8 (40%) / 15x4,5-8 (20%) Service weight: 3.215 kg Length: 1.900 mm Width: 1.090 mm Year of manufacture: 2009 Operating hours: 8.964 h Condition: working condition EQUIPMENT 3rd valve ATTACHMENTS Sideshift Chedpfx Asz Ap Utod Isc Rental truck – Rental price on request. Internal no.: E5718 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), machine/vehicle number: 3578, Year of construction: 2011, load capacity: 30,000 kg, lifting height: 3,000 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,500 mm, total length: 6,450 mm, total width: 3,500 mm, operation weight: 41,400 kg, additional equipment features: Centralized greasing system, Dual tread, Backup alarm, Weight system, Engine heater, Equipment: lighting, SMV SL30-1200B from Uniktruck Chodpfxozzrgce Ad Iec Wheel type – Drive wheel: Pneumatic - Dual mounting Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00 -25 Wheel size – Steering wheel: 16.00 -25

Condition: good (used), machine/vehicle number: 3456, Year of construction: 2008, load capacity: 25,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 250 mm, fork length: 2,400 mm, total length: 6,200 mm, total width: 3,100 mm, operation weight: 35,400 kg, additional equipment features: Warning triangle, Dual tread, Front mud guards, Weight system, Equipment: lighting, SMV SL25-1200 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 14.00-24 Chedoyuikaspfx Ad Ioc Wheel size – Steering wheel: 14.00-24

Year of construction: 2000, condition: ready for operation (used), A hot beverage filling and capping machine MBF is available. Filling stations: 35, capping heads: 4, bottle type: VdF, bottle volume: 1000ml/500ml, max. filling temperature: 95°C, screw cap: MCA aluminum standard, cap dimensions X/Y: 28mm/15mm, filling capacity: 7000bottles/h, bottle height (1l): 306.5mm, machine dimensions X/Y/Z: approx. 3400mm/2300mm/2600mm. Documentation available. On-site inspection is possible. Chsdpfxjyhgn As Ad Iec

Year of construction: 2005, condition: used, Tablet dedusting unit Brand: Pharma technology Model: 1200 S Conveyor speed: adjustable Elevation height: 1200 mm Power supply: 230 V Control module: metal detection Chjdpfx Adox Rz Iwo Iec Brand: Safeline Model: Tab/ex Year : 2005 Power supply: 230 V Ejector valve for non-conforming products.

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Csdpfx Aeyr Tlpod Iehc Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Csdpfxeyr Tttj Ad Ijhc Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Csdpfoum U S Eex Ad Iehc

Year of construction: 1997, condition: used, Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible. Chjdpozybwbefx Ad Ijc

Year of construction: 1995, condition: ready for operation (used), An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible. Chedpfx Adjwwvvps Ijc