Used Grain Laboratory Equipment for sale (41,349)

Condition: good (used), machine/vehicle number: 2868, total length: 12,395 mm, total width: 2,590 mm, Year of construction: 2022, operation weight: 8,000 kg, load capacity: 100,000 kg, Seacom RT40-100T from Uniktruck Gkodpfx Agjzmy A Ao Tja Wheel type – Steering wheel: 350 Wheel size – Steering wheel: 22 x 16 x 16

Year of construction: 2018, condition: used, 2018 | Heatwork HW3600 | Used Small Equipment 📍Location: Latvia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine hours 2495 - HeatWork HW3600 Ground Thawing / Hydronic Heater - 2018 Diesel and electric hydronic heater, 103 kW, Made in Norway Overview: HeatWork HW3600 (year 2018), a mobile ground-thawing and frost-prevention machine. Closed-system hydronic heater delivering fluid-borne heat up to 100 degrees C for thawing frozen ground, curing concrete, heating buildings and halls, drying and frost protection. Three independent hose circuits (630 m total) for flexible coverage of large areas. Year-round machine. Condition: Fully functional when run on AC mains power - heating, pump and controls all operate normally. When running on the built-in diesel generator, the unit may shut down unexpectedly and fail to restart; fault suspected in the control box. Sold as-is; buyer should budget for control-box diagnosis/repair to restore off-grid diesel operation. Usable now wherever mains power is available. Key specifications: Year: 2018, Engine hours: ok. 2,500 h Max heating effect: 103 kW, Fluid temp: 0-100 degrees C, Efficiency: 94 percent Pump: 3,900 l/h, Burner: single stage Fuel: winter diesel (Arctic Class 2) / biodiesel; ok. 3.5 l/h thawing 200 m2, max 9.0 l/h Diesel tank: 320 L, Run time: up to 90 h, VTV fluid: ok. 50 L Hoses: 3 x 210 m = 630 m, reinforced (max 30 bar), System pressure: 2-6 bar Electrical: 230 V / 2,600 W, Weight: 1,860 kg, Origin: Norway Capacity: Thawing 0-200 m2 (internal reel), 200-400 m2 with external reel; frost prevention up to 400 m2. Thawing ok. 48 h at 60-80 cm depth. Applications: Frozen ground/ice/snow, concrete curing, heating buildings/garages/workshops, preheating before casting, point-thawing foundations/manholes, roof thawing, drying, water heating. Gksdpfx Ajzuaprsg Toa 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41209 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), functionality: fully functional, mileage: 60,253 km, power: 55 kW (74.78 HP), first registration: 09/2017, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 11/2027, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 7,379 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: ES Winter 1, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition formerly a municipal/government vehicle Gkedpfxjzk Ug Rj Ag Tea registered as a self-propelled working machine (40 km/h) Upon request, we will perform a major engine inspection, including timing belt, water pump, oil, and filters, free of charge at the time of sale. 7379 total operating hours 4181 working operating hours 60253 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive includes Kif snowplow, type CM 1600, 1500 mm wide (like new/has never seen snow) or, alternatively, with Kif front sweeper, type CM 1600, 1300 mm wide, manufactured in 2019 (like new/has never seen snow), not visible in the pictures includes Gmeiner salt spreader, type Husky 500V FS, with support legs (as new/used twice for testing) right-hand portal arm with weed control function (requires a special disc brush) as new mixed bristle disc brush new water spray nozzles external control for the dirt container rear-view camera and suction shaft camera sweeping width up to 2270 mm dirt container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics, circuit 1 (front) 0–50/0–70 l/min - 225 bar, circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweepers, snowplows, and lawnmowers (not included in the scope of delivery) errors, changes, and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by appointment. Outside of these hours, telephone appointments can be arranged. We will gladly accept your current used equipment/vehicle as a trade-in. Sales to commercial businesses and exporters will be given priority. This applies to our entire vehicle stock. The aforementioned information is non-binding; errors/changes and prior sale are subject to change!

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, pressure: 12 bar, operating pressure: 12 bar, We offer this new Cryonomic Cob 71r cryogenic cleaning unit + abrasive set, manufactured in 2026. For sale: CRYONOMIC COB71R cryogenic cleaning machine, equipped with an abrasive module, in near-new condition. The machine has only been used for 5 hours and is still in excellent cosmetic and working condition. The COB71R is a high-performance, professional cryogenic cleaning machine, equipped with a remote control integrated into the gun, allowing direct adjustment of the dry ice flow rate, air pressure, and lighting. Thanks to its 30 kg hopper and a working pressure of up to 12 bar, it is perfectly suited for industrial cleaning, maintenance, restoration, stripping, and surface preparation. The abrasive module also allows for more demanding stripping operations (rust, paint, graffiti, etc.). Included equipment: Gedpfxeziiy As Ag Toka CRYONOMIC COB71R machine Original abrasive module Gun with remote control Original hose and accessory set Documentation and invoice (if available) Condition: Only 5 hours of use Impeccable operation Machine ready for work Reason for sale: This machine was purchased to develop a new business activity, but it ultimately does not align with my field of activity. This is the sole reason for the sale. Additional photos can be provided upon request. Price: to be determined / negotiable. Purchase price: €35,828.1 (including VAT).

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: 2031306, type of input current: three-phase, overall weight: 9,200 kg, Roller mill from Bühler, previously used in cornflakes production. Pre-installed are a metal detector and a vibratory channel. Control cabinet is included. Weight of the roller mill approx. 9,200 kg. Gkodpfxexgq Rko Ag Tea

Condition: used, Year of construction: 2011, Dimensions: Lifter 1 2.010 x 2.050 x 2.074 mm Gedpfx Aezhpateg Toka Dead weights: Lifter 1 1.225 kg weight max. in kg 2.000 kg Effective stroke 1.040 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Manufacturer: Ascojet Model: 2001RX Godpfx Agezf Uz Dj Tjka Type: Dry ice blasting machine Operating pressure: up to 10 bar Air consumption: approx. 3–6 m³/min Dry ice consumption: 20–80 kg/h Operating hours: 481

Condition: used, Manufacturer: Triventec Gksdpezf Uy Hsfx Ag Tja Type: Dry ice blasting machine (exact type unknown) Available quantity: 2 units Condition: used Application: Cleaning and surface treatment using dry ice blasting.

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool Godpfx Agjzdtfls Tjka The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Despatch laboratory oven. Despatch laboratory oven + 8” WAFER LCC: Maximum temperature 260 °C Lockable disconnect switch – turn off the control panel for easy maintenance Protocol 3 controller with large LCD display, integrated data logging functions, and USB port for easy oven setup and data export Stainless steel interior with continuously welded interior seams on the insulation side to protect the working area from contamination Programmable door interlock prevents the operator from opening the oven door while the cycle is running The door interlock switch turns off the heating when the door is opened The recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic manometer monitors the pressure drop of the HEPA filter, so you know when the filter needs to be replaced Electric door release for ergonomic operation UL & C-UL listed control panel opens Modbus communication connection (RS485) for remote monitoring and recording Chamber dimension L 350 mm Gksdezdr Ekjpfx Ag Tsa Chamber dimension W 350 mm Chamber dimension H 350 mm maximum temperature 260°C Digital display Yes Electrical connection 230 V Overall dimension L 830 mm Overall dimension W 910 mm Overall dimension H 560 mm Type: LCC1-16NV-3 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, functionality: fully functional, 8X4 (2.4 X 1.2M) DOUBLE DECK SCREEN 2.2KW DRIVE MOTOR WEIGHT 1800KG LENGTH 5000MM WIDTH 2000MM Gkodpein E Hqofx Ag Tsa HEIGHT 2300MM 4.5M FINES CONVEYOR 3KW GEARBOX DRIVE GASOLINE 8.5KW ONBOARD GENERATOR AGRI OR ROAD LEGAL WHEELS Worldwide delivery available, dealer enquiries welcome,

Condition: good (used), Here, we offer a handling device from ZASCHESitec. This device was used in the manufacturing of instrument panels. It consists of the following components: KBK - FPM 10 - 7.0 x 5.0 Gsdozdim Hspfx Ag Teka Traveling carriage - LWK 762 x 762 Lifting module - Z-L6 - 80/1280 - 1486 Load handling device - GP10 Load capacity: 10 kg Scope of delivery: (ZASCHESitec handling device, technical documentation) Condition: used We would be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted. Godpfx Ajzkucfsg Teka

Condition: used, Optical encoder Manufacturer: Heidenhain Gkedpfscifpmsx Ag Tsa Type: OZA II 02 - 6 Device number: 2739 Mounting distance: 14.30

Condition: good (used), Co-rotating center with cutting insert Manufacturer: Röhm Type: 506 VL MK 6 Overall length: 400 mm Body diameter: 120 mm Gjdpfxeducpbj Ag Teka Max. clamping force: 2000 c/oN Weight: 14 kg

Condition: new, bott vario3 van racking system Gjdov T Ua Tjpfx Ag Toka H x L x W: 1650 x 926 x 600 mm - 3 drawers - 2 folding shelves

Condition: new, Bott vehicle equipment: - H 1602 x L 1039 x W 377 mm Godpfx Aov T Udrjg Tjka - With 4 folding shelves

Condition: excellent (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotating tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on a rotating table. The machine is equipped with two rotating tables. Rotating table diameter – 1400 mm Maximum product height – 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours – 5275 Commissioning date: 03/31/2009 Gsdpfxjy Uc Iao Ag Toka Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blasting wheel, number and type: 2 WX1M External diameter of blasting wheel: 330 mm Blasting wheel speed: 2900 rpm Amount of abrasive material thrown per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotating table diameter: 1400 mm Rotating table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: good (used), machine/vehicle number: 3571, total length: 4,900 mm, total width: 4,000 mm, Year of construction: 2021, operation weight: 5,600 kg, load capacity: 80,000 kg, Seacom RT20-80T from Uniktruck Gkedpfxjzlun Re Ag Tja

Year of construction: 2019, operating hours: 2,351 h, condition: used, Transmission: Automatic Power: 218 kW (296 HP) Gkjdsx R T Najpfx Ag Tea Empty weight: 36.500 kg Please contact Emal Jaweed for more information

Condition: new, Quantity: 2 units Mirror and equipment column with external groove Gkodpozd N Tfjfx Ag Tsa Item No.: 2045643 SICK Unused item from warehouse clearance

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, tail-lift, trailer coupling, From our range of new vehicles, we offer: All-wheel drive Equipment Transport Vehicle GW-L on off-road capable MAN TGM 18.320 chassis Our robust powerhouse for heavy loads. Its superior off-road capabilities ensure reliable performance even in tough conditions. Suitable for operations such as severe weather response, setting up water supplies, as a modular rescue or equipment vehicle—also available with winch—or as an auxiliary tanker (TLF) with water tanks. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission • Super single tires, matched track width, for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Cab with auxiliary heater Gkedpfx Agexyud Ue Tja Body: • High-quality bodywork made from rust- and corrosion-resistant materials • Two spacious side equipment compartments • Fold-out steps for each lateral equipment compartment • Customizable stainless steel equipment racks tailored to your requirements Tail Lift: • BÄR tail lift BC2000 • Aluminum platform Bär BC2000 S4-C4 • Two-button foot control • Dual roll-off protection • LED platform lighting Safety and Lighting: • LED mini lightbar on the vehicle roof / 2 LED front flashers • Pneumatic special signal system MARTIN-HORN • Rear-view camera • Comprehensive LED lighting in the crew and all equipment compartments • LED perimeter lighting on the body and additional floodlights • Pneumatic LED light mast with remote control We would be pleased to provide a detailed quote and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This ad does not constitute a binding offer, but is for informational purposes only. Subject to prior sale!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 85 EVO The Minipack Replay 85 EVO is a mobile, manual shrink wrap machine with a hood, designed for large products and larger packaging formats. – Mobile, manual shrink wrap machine with hood – Output of up to 300 packages per hour – Usable sealing bar dimensions: 840 × 590 mm – Max. product dimensions: 800 × 590 × 300 mm – Max. film roll dimensions: Ø 300 × 800 mm – Working table height: 940 mm – Machine dimensions (closed): 1,950 × 1,000 × 1,180 mm – Machine dimensions (open): 1,950 × 1,000 × 1,480 mm – Machine weight (net/gross): 212 / 264 kg Gkjdpfx Aex Tr R Usg Tea

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 35 The Minipack Replay 35 EVO is a manual hood shrink wrap machine designed for small production volumes where space is limited. Manual tabletop shrink wrapping machine Power supply: 230 V, single-phase (optionally 120 V) Installed power: 2.0 kW (230 V) / 2.25 kW (120 V) Maximum current: 8.6 A (230 V) / 19 A (120 V) Sealing bar usable dimensions: 380 × 250 mm Gkedpfx Aex Tr Igsg Tsa Maximum product dimensions: 350 × 240 × 140 mm Maximum film roll dimensions: Ø 200 × 350 mm Machine dimensions (closed): 935 × 620 × 540 mm Machine dimensions (open): 935 × 620 × 540 mm Machine weight (net/gross): 49 / 63 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, MINIPACK REPLAY 40 EVO The Minipack Replay 40 EVO is a mobile, manual shrink film packaging machine with hood, ideal for small to medium batch sizes. ▢ Mobile, manual shrink film packaging machine with hood ▢ Output up to 300 units per hour ▢ Usable sealing bar dimensions: 420 × 280 mm ▢ Max. product dimensions: 400 × 250 × 160 mm ▢ Max. film roll size: Ø 250 × 500 mm ▢ Working table height: 925 mm Gkedpfx Aox Tqf Deg Toa ▢ Machine dimensions (closed): 1,160 × 700 × 1,120 mm ▢ Machine dimensions (open): 1,160 × 700 × 1,220 mm ▢ Machine weight (net/gross): 90 / 111 kg