Used Four-Side Planer, Width 770 Mm for sale (83,148)

Condition: excellent (used), Guilliet KXR four-sided planer Working width 220mm Iajdpfjn Tph Eex Am Isr Working height 120mm Number of spindles 6 Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 5.5kw Bottom 5.5kw Universal 5.5kw Feed rate adjustable on variator 6-27m/min Feed motor 2.2kw Feed on cardan shafts Pneumatic stops Worktop lubrication

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, For sale is a used four-sided planer/moulder from Weinig with 7 spindles and powered infeed roller conveyor. The machine has been in operation since at least 1985 and was overhauled in the workshop in 2007. It is in working condition but is no longer in use. The exact year of manufacture is unknown; based on its design and equipment, it is likely a Weinig Unimat 17 series machine from the 1980s. Technical data (approximate values): - 7 spindles - Spindle diameter: 40 mm - Working width: approx. 20 – 170 mm - Working height: approx. 8 – 120 mm - Tool diameter: up to approx. 160 mm - Feed speed: 6 – 24 m/min - Voltage: 380 V / 50 Hz - Weight: approx. 4,500 kg - Including powered infeed roller conveyor - Including various cutters (see photo) Iodpfx Aow Rkqgsm Ijar Note: This is a used, older model machine, being sold without warranty. Inspection by appointment possible.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, REX HOMS-310-K Four-sided Planer Year of manufacture: 1980 Serial number: 18.568 Power: 91.69 kW It has not been used since 2021. The machine was stored in a closed production hall for the entire period and is fully functional. Iaedpfxowfqh Aj Am Ier After purchasing the machine, the electrical cables were replaced with new ones. We rate the technical condition as very good - visually there are visible traces of use, but technically everything works properly. The reason for the sale is the end of glued wood production. Maximum working width: 305 mm Minimum working width: 50 mm Maximum workpiece height on 2 sides: 310 mm Maximum workpiece height on 4 sides: 160 mm Minimum workpiece height: 17 mm driven upper and lower feed rollers

Condition: good (used), Weinig Profimat 23 E four-sided planer working width 230mm working height 120mm 5 heads down/right/left/up/down profile adjustment of heads diameter of spindles 40mm pneumatic pressure pulling rollers smooth adjustment of the feed speed Main motor 7.5 kW Spindle speed max/min 6000 Iaodpfeuaqh Iox Am Ijr

Condition: ready for operation (used), Maximum planing width: 230 mm Iaedewh Szvepfx Am Ijr Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Head configuration: Bottom, right, left, top, universal Motor power: 4 kW (bottom), 5.5 kW (right), 4 kW (left), 4 kW (universal) Spindle rotation speed: 6000 RPM Table lubrication Electric height adjustment (up/down) Two feed speeds Year of manufacture: 1999 Weight: 2320 kg Voltage: 400 V

Condition: excellent (used), functionality: fully functional, Working width 220 mm Working height 120 mm 5 spindles Spindle arrangement: bottom/right/left/top/bottom Spindle diameter 40 mm Motors: 4 kW, 5.5 kW, 5.5 kW, 4 kW Table length 198 cm Table lubrication Stepless feed speed adjustment Ijdjxxtuvjpfx Am Iear Pneumatic pressure on feed rollers Head adjustment in two axes Electric adjustment of top head – 0.25 kW Feed motor power 2.2 kW

Condition: ready for operation (used), working width 260mm working height 150mm toothed roller in the feed table before the first head Isdew Afl Repfx Am Ijar 5 heads head arrangement: lower/right/left/top/bottom electric setting of planing dimensions stepless feed adjustable up to 24m/min pneumatic clamps of the pulling rollers head adjustment in two axes engines: 1. 11kW 2. 11kW 3. 12kW 4. 11kW 5. 7.5kW pulling roller drive via cardan shafts feeding table length 2m chrome plated table additional pulling roller at the right head, so-called tandem horizontal pneumatic clamps set of heads included with the machine

Condition: excellent (used), Leadermac LMC 423 S, four-sided planer - max planing width: 23cm - max planing height: 13cm - electric raising for feed beam with rollers - feed roller in table + pump with sliding fluid - chrome-hardened tables - complete set of spiral cutterheads - all spindles adjustable vertically and horizontally - bottom spindle 5.5 kW, right and left spindles via one 7.5 kW motor, top spindle 7.5 kW Ijdpfx Amexixu Ns Iear - all motors with brake - stepless feed speed adjustment Weight: 2,200 kg, machine length: 3.3 m. Machine in very good condition, ready for operation.

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. Iaodpjw Rdtusfx Am Isr • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots • Precisely machined top section • Weight: 900 kg • Can be transported or loaded by forklift

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, II. choice Manufacturer: SSI Schäfer Volume: 770l Iodjk Nmmhspfx Am Ijar Total width: approx. 1.350 mm Total depth: approx. 1.115 mm total height: approx. 1.470 mm Material color barrel: black Material color lid: green tires: 4 tires (2x braked) Dead weight: 68 kg Remark: Useful width and depth are tapered towards the bottom. General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Ijdpfx Amsku Aw Ne Ijar Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: SSI Schäfer Volume: 770l Depth of lid closed = 770 mm Depth lid open = 840 mm Height 1,360 mm lid closed Total width: 1,380 mm Material color: black Tires: 4 tires (2x braked) Material: Polyethylene (PE) Tare weight: 68 kg Note: Useful width and depth are tapered towards the bottom. General information about the item: Iasdsk Nl Huepfx Am Ior This item is only offered for collection. Any other desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,458 h, load capacity: 8,000 kg, lifting height: 4,030 mm, fuel type: gas, mast type: simplex, construction height: 3,460 mm, fork carriage width: 3,700 mm, fork length: 1,200 mm, empty load weight: 12,260 kg, total length: 2,860 mm, drive type: Treibgas, construction width: 2,800 mm, Four-way Side Loader Load Center: 700 Fork Width: 215 mm Fork Thickness: 80 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Good Front Tires Type: Superelastic Front Tires Size: 400x60-15 Rear Tires Type: Bandage Rear Tires Size: 22x12x16 Iedpfjykvuqjx Am Ioar Description: In addition to this Hubtex model, we have approximately 200 heavy-duty forklifts, compact forklifts, lift trucks & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing & financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DQ80-G. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to exhibit your vehicle for commission sale. Fork Positioner, Telescopic Forks: 1200 / 2050 mm; Fork Positioner Opening Range: 810 / 3,700 mm Heater, Full Cabin, Platform Height: 755 mm,

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 6,496 h, load capacity: 2,500 kg, lifting height: 6,540 mm, free lift: 2,000 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork carriage width: 1,440 mm, fork length: 1,200 mm, empty load weight: 6,200 kg, total length: 1,580 mm, drive type: Treibgas, construction width: 1,540 mm, Four-way sideloader Load center of gravity: 600 Fork width: 125 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Iasdpfx Amju Dyzus Ijr Front tires type: Bandages Front tires size: 22x10x16 non-marking Rear tires Type: tires Rear tires size: 16x7x10,5 non-marking Description: In addition to this Combilift model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are possible for us at any time. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this C2500CB P.S.: Our forklift master workshop is specialized in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, heating, full cab, full free lift,

Condition: good (used), Year of construction: 2016, operating hours: 4,618 h, load capacity: 2,500 kg, lifting height: 7,500 mm, fuel type: electric, mast type: triplex, construction height: 3,367 mm, empty load weight: 5,000 kg, mileage: 4,618 km, Four-way reach truck Brand: Still (Germany)Year of manufacture: 20164,618 hoursCapacity: 2,500 kgLift height: 7,500 mmOverall height: 3,367 mmEquipped with SIDESHIFT and FORK SPREADEREquipped with CAMERA Battery: 2022 with external chargerVideo coming soon Iaodpfx Aeyx I Elsm Ior

Condition: used, Number of boring spindles 5 St. Working width 230 mm Iedpfx Ajy Dh Spjm Iear Working height 120 mm Length of the planing table 2.000 mm Planing and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads. Including dismantling and loading. Fixed loading date: 15.06.2026. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets Isdpfsyrkpxjx Am Iear * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: Isdew Sguwepfx Am Iear For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), CATALOG NUMBER 7915 TECHNICAL DATA cutter head width: 640mm number of knives: 4 pcs max thickness of processed element: 200mm – top: anti-kickback fingers/ejectors serrated infeed roller, powered pressure unit planing cutter head pressure unit smooth outfeed roller, powered – bottom: adjustable rollers in lower table: 2 pcs motor: 7kW variable feed speed control Dimensions (LxWxH): 1800x1250x1150mm weight: 1250kg ADVANTAGES – Made in Bulgaria – Variable feed speed control – Used thickness planer in very good condition Iasdpfx Ameyrrzpe Ier Net price: 9500 PLN Net price: 2260 EUR based on 4.2 EUR rate (Prices may vary with major fluctuations)

Condition: used, Year of construction: 1986, used, good condition, low hours Brand: Weinig Model: P22N Iajdpsy Apfzefx Am Ijr Year of manufacture: 1986 Machine no.: 226-670 Number of spindles: 4 Spindle arrangement: bottom - right - left - top Motor power kW: 4.0 - 7.5 4.0 Motor brakes Planing width approx. mm: 220 Planing height approx. mm: 120 Spindle diameter mm: 40 Table length approx. mm: 2,000 Pre-cutter Cardan feed Lateral pressure rollers Protective hood Infeed before the jointer Infinitely variable feed speed 4 - 20 m/min Profiling Sliding rollers: 1 piece Electric adjustment: thicknessing shaft Digital displays: width-height Extraction connection mm: 120/120/120/140 Space requirement approx. 3600 x 1400 x 1400 mm Weight approx. 1,500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition, as inspected, without any warranty or guarantee

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 7,865 h, load capacity: 6,000 kg, lifting height: 6,570 mm, free lift: 2,240 mm, fuel type: gas, mast type: triplex, construction height: 3,630 mm, fork carriage width: 1,550 mm, fork length: 1,580 mm, empty load weight: 9,800 kg, total length: 4,160 mm, drive type: Treibgas, construction width: 2,500 mm, Four-way Side Loader Load Centre: 600 Fork Width: 200 mm Fork Thickness: 65 mm Mast Type: Triplex Condition: Ready for use and fully functional Ijdpeyvwc Uefx Am Ijar Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Size: 355/65-15 Rear Tyres Type: Superelastic Rear Tyres Size: 27x10-12 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders available in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Hire purchase and financing at attractive terms are always possible with us. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this C6000SL. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We can also offer to display your vehicle for commission sale in our facilities. Fork positioner, heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,071 h, load capacity: 2,500 kg, lifting height: 5,600 mm, fuel type: electric, mast type: simplex, construction height: 3,510 mm, fork carriage width: 1,520 mm, fork length: 770 mm, empty load weight: 7,100 kg, total length: 3,350 mm, drive type: Elektro, construction width: 2,500 mm, Four-way side loader Load center: 530 Fork width: 150 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Battery capacity: 775Ah Iodpjyvwczefx Am Iear Battery year: 2023 Description: In addition to this Votex - Bison model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always available. We are also pleased to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this compact model. P.S.: Our master forklift workshop is specialized in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons onwards. We can also consign your vehicle for sale at our facility. Platform height: 380 mm

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,574 h, load capacity: 2,000 kg, lifting height: 4,980 mm, free lift: 1,240 mm, fuel type: electric, mast type: triplex, construction height: 2,910 mm, fork carriage width: 3,160 mm, fork length: 1,795 mm, empty load weight: 10,036 kg, total length: 3,530 mm, drive type: Elektro, construction width: 3,460 mm, Four-way side loader Isdpjyvwcujfx Am Iear Load center: 600 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Cushion tires Battery voltage: 80V Battery capacity: 775Ah Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing under attractive conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this PKD 20/21/50. P.S.: Our master workshop specializes in repair, maintenance, overhaul, and customization for forklifts starting at 8 tons. We are also happy to offer your equipment for consignment sale at our premises. Fork positioner, Full free lift, Platform height: 380 mm

Condition: used, maximum load weight: 30,690 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2023, next inspection (TÜV): 09/2026, loading space length: 15,440 mm, loading space width: 2,550 mm, loading space height: 770 mm, total width: 2,550 mm, total height: 770 mm, Year of construction: 2023, Equipment: ABS, 3-axle semi low-loader KÄSSBOHRER, extendable, first registration as new. Fifth wheel height: 1,150 mm Overall length: 13,190 mm Telescopic sliding platform, width: 300 mm Gooseneck length: 3,950 mm Low bed length: 9,240 mm + telescopic extension: 6,200 mm Loading height (low bed): only 770 mm Unladen weight: approx. 11,317 kg Chassis partially metallized visible parts Ijdoyxb E Sjpfx Am Isar BPW axles with drum brakes 1st axle: lift axle 3rd axle: trailing steering axle WABCO EBS with rollover stability support (RSS) 12x 205/65 R 17.5 MICHELIN tires Oversize package up to 3,000 mm width Aluminum approach ramps, width: 600 mm, length: 2,400 mm, load capacity up to 32 tons Lashing rings: 6 pairs, load capacity 10 tons (heavy-duty) 8 pairs, load capacity 5 tons 6 pairs, load capacity 8 tons 1x long material rack Large toolbox at the front, behind the bulkhead, transverse to the direction of travel (LxWxH): 600 x 830 x 2,310 mm RENTING is the NEW BUYING – also available immediately with our full-service rental!

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller Iodpfoytdtasx Am Ijar - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)