Used Fischer Xdl-Xymz for sale (221)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements Pgodpfx Ajuxfu Nohdon - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator Pgjdpsuxfucefx Ahdsn thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: used, functionality: fully functional, machine/vehicle number: FN615268, Year of construction: 2020, operating hours: 2,469 h, load capacity: 2,000 kg, lifting height: 6,500 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN615268 Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: Solid rubber Front tyres condition: 80 - 100% Rear tyres type: Solid rubber Rear tyres condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Pedpfx Ahjw H Eiqjdegn Battery manufacturer: JH Battery type: PzS Battery year: 2023 Battery condition: 80 - 100% Side shifter, integrated lateral lift, front work lights, overhead guard, front windscreen, STVZO, full free lift,

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Pjdpjtrf Smjfx Ahdogn Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Pgodpfxourw Uyj Ahdon Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Pedped Amifefx Ahdsgn Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10901-157, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 860 mm, rotational speed (max.): 42,000 rpm, number of slots in tool magazine: 20, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item on time between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS X-axis travel: 760 mm Y-axis travel: 550 mm Z-axis travel: 300 mm X-axis feed rate: 30 m/min Y-axis feed rate: 30 m/min Z-axis feed rate: 30 m/min Spindle Maximum spindle speed: 42,000 rpm Tool holder: 40 mm Spindle interface: HSK-E40 Working spindle: FISCHER MFW-1230/42 Number of tool magazine slots: 20 Table Table width: 550 mm Table length: 860 mm Table load capacity: 800 kg MACHINE DETAILS Overall height: 2,900 mm Overall length: 4,200 mm Overall width: 2,600 mm Overall weight: 6,500 kg Voltage/phases/frequency: 400/3/50 V/Ph/Hz Max. current consumption: 6.1 A (50 Hz) Rated power: 3.2 kW (50 Hz) Degree of protection: IP44 EQUIPMENT - Documentation/manual Pjdpfx Ahowvi S Iodjgn - Continuously variable speed control - Digital AC servo drives with Sercos interface - Precision, preloaded, backlash-free ball screws - 20-position tool changer - Includes tool package

Condition: good (used), Crew container interchangeable body, The container is self-sufficient, can be charged, and has power supply. It is insulated. Pgsdpfoyxpbbox Ahdon Side door and 2 hinged doors. Dimensions: 600x250x250 cm.

Condition: new, Year of construction: 2026, Four-axis controlled shot blasting booth for cleaning die-casting molds, steel rings, permanent molds in aluminum casting, tire molds, press dies, and more. The travel path of the blasting nozzles is freely programmable. 2 automatic nozzles and 1 manual blasting nozzle for subsequent cleaning of the parts. Hardox rotary table and conveying screw for long-lasting operation of the blasting system. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts. Pgsdpfx Aodrtanjhdon

Condition: like new (used), functionality: fully functional, HANG 101--50 Electric Eyeletting Machine Electric single-head eyeletting machine 101--50 PiccoStar for eyelets No. 269 / 270 Ø 5.0 mm Automatic eyelet feed Suitable for paper, cardboard, plastics, etc. Ideal for contracts and certificates Punches and eyelets in a single operation (the eyelet punches the hole) Continuously adjustable rear and side stops ensure precise alignment Push button for triggering the eyeletting process With self-piercing eyelets: up to 30 sheets at 80 g/m² paper or material thickness up to 3 mm Pgedpfswvh Alsx Ahdon With pre-punched material: up to 50 sheets at 80 g/m² paper or material thickness up to 8 mm Weight: 36 kg / Voltage: 230 Volts / Tools / Operating manual. The machine is in as-new condition.

Condition: ready for operation (used), Spine enhancement with NAGEL SP PLUS SQUARE PRESS. Pedpfxsx Ek D Ds Ahdsgn Flat, rectangular pressing of the brochure spine by means of a special pressing system. Max. number of sheets per brochure: up to 30 sheets (80 g/m² paper) Max. output (sets/hour): Single pass 1600/hour, double pass 1400/hour Brochure formats min. (mm): 70 x 105 Brochure formats max. (mm): 350 x 250 Power supply (V): 230 Volt Shingle delivery / Operating instructions included. Net weight (kg): 100 Gross weight (kg): 120 Please note: Our offers concern used machines, which may show signs of wear (such as minor scratches or yellowing).

Condition: used, functionality: fully functional, machine/vehicle number: H2120X00.., Year of construction: 2020, operating hours: 1,256 h, load capacity: 3,000 kg, lifting height: 4,980 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, fork length: 2,200 mm, drive type: Diesel, Diesel Forklift VIN: H2120X00.. Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Condition: Ready for use and fully functional Technical Condition: Good Pedpfxjwlwp Ho Ahdsgn Front Tires Type: Solid Rubber Front Tires Condition: 60 - 80% Rear Tires Type: Solid Rubber Rear Tires Condition: 40 - 60% Sideshift, Fork Positioner, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Full Cabin

Condition: new, Year of construction: 2025, Centrifugal wheel system, suspended monorail type 1.15 2T Dimensions: D=1000mm, H=1500mm, payload: 500kg, with 2 centrifugal wheels, 7.5kW each, including filter system and dust collection filter. Pgjdpsdrr U Sofx Ahden For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.

Condition: new, Year of construction: 2025, Abrasive blasting cabinet DSK 1102 S with trolley and rotary table. Pododhl Ngspfx Ahdsgn Width: 1500mm, Depth: 1235mm, Height: 995mm Lift-up door, pneumatic. If you have any questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Centrifugal wheel rotating table system Pgedpfsdtq Anex Ahdon D = 1500 mm, 2 x 7.5 kW centrifugal wheels If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been in operation since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Extraction floor, waffle floor for mineral blasting media, approx. 7000x4200mm, without grating cover, with suction nozzle and collection boxes. Pgodpfx Asdz Ayvshdon For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on production at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Container shot blasting system. 5.89 x 2.35 x 2.69 m Pgjdpfodkbvcsx Ahdjn Container shot blasting systems with integrated machine room. Flat conveyor bed, screw conveyor bed, bucket elevator, processing unit, pressure blasting pot (100 l), filter system, extraction bed, opening designed as a manual blasting booth. For questions regarding technical specifications, etc., please contact us in writing or by phone. The basis for these machines is manufacturing at the Grossenlüder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts. Images may include optional accessories.

Condition: new, Year of construction: 2025, Shot blasting chamber, 12x5 m, with shot blasting carriage and flat conveying system. Flat conveying system, screw conveyor, bucket elevator, magnetic separator, processing equipment, material hopper, shot media refilling system, free-jet pressure blasting unit, filter system with cleaning function. Walls lined with 4 mm woven rubber. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts. Pgodpfodhliksx Ahdjn

Condition: new, Year of construction: 2025, Shot blasting chamber, 7 x 4.5 m, with extraction floor for mineral blasting media (glass, ceramic, corundum, garnet sand, etc.). Magnetic separator, cyclone, media processing, material hopper, blasting media refilling system, free-jet compressed air blower, filter system with cleaning function. Walls lined with 4 mm fabric rubber. Roof hatch for crane loading. For questions regarding technical specifications, etc., please contact us in writing or by telephone. Psdpfx Aed Naafohdegn The machines are based on production at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2025, Shot blasting booth DSK 20.10.09 with trolley and rotary table. Width: 2050mm, Depth: 935mm, Height: 955mm Lift-up door with pneumatic system, offering the advantage that the blasting media falls into the booth when the door is opened, rather than onto the floor. Podefnh Rvspfx Ahdjgn If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts.

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Pgsdju T Rhbspfx Ahdsn

Condition: reconditioned (used), Year of construction: 1998, operating hours: 44,675 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 60,000 rpm, spindle speed (min.): 9,000 rpm, workpiece weight (max.): 800 kg, table width: 860 mm, table load: 1,500 kg, travel distance W-axis: 635 mm, Equipment: documentation/manual, Fully overhauled and in perfect condition as per original specifications and accuracy. Podswb Db Ujpfx Ahdjgn 6 Axis X-Y-Z-C-U 7th axis CNC-rotary table with tailstock in option Control: Fanuc 15 MB Grinding Spindle 60S speed 9,000 to 60,000 rpm Hi-Cut system with full enclosure CBN Form rotary dressing with Fischer spindle and Dr. Kaiser diamond wheel This machine is under power and can be seen in our facility in Gals, Switzerland Garantee of 6 months Shipment, installation and training can be provided

Condition: ready for operation (used), functionality: fully functional, mileage: 19,200 km, gearing type: automatic, Chevrolet CK3500 Cheyenne 4WD (Selectable, with reduction gear) tractor unit with air brakes Semi-trailer with tunnel blower / large fan "Fischer Multiwind 37.101.02" Pgedpow Nraaefx Ahdsn The fan is operated by its own engine drive and can be leveled. The fan is equipped with an external water injection system (Storx). The semi-trailer can be towed with a Rockinger towing hitch or pushed with a tow bar. Fan engine operating hours: 507h Total vehicle length: 9,450 mm Trailer: 5,300 mm Total weight (vehicle incl. trailer): 6,900 kg The trailer is registered on the main vehicle registration certificate, but the semi-trailer has its own registration certificate.

Condition: used, mileage: 680,000 km, power: 375 kW (509.86 HP), first registration: 05/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: air conditioning, * Mercedes-Benz 2651 Actros MP2 V8 Tractor Unit * First registration: 2008 * 680,000 km * Euro 5 * Telligent manual transmission with clutch * Tipping hydraulics * Leaf/air suspension * 6x4 axle configuration * Air conditioning * Retarder * Mega cab * Wheelbase: 3.30 m * Unladen weight: 9,575 kg * All injectors replaced! * Engine runs unevenly and smokes * Camshaft likely damaged Special equipment: Work lights on rear cab wall (top), audio system: Radio Truckline CC 65 / 70 with cassette deck, 220 Ah battery, comfort cockpit, air horn, movable cab entrance, rear axle H 7, 13 t, crown wheel 300, reinforced clutch, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, auxiliary drive MB 2C, Voith retarder, low-maintenance fifth wheel, Fischer fifth wheel coupling, circuit breaker, seats in cab: driver's comfort suspension seat incl. horizontal suspension, sun visor, 24V socket in cab, straight front axle, transmission oil cooler Pedpfx Ahsyq A Dredjgn Additional equipment: Emission standard EURO 5, axle configuration: 6x4, trailer socket 24V / 15-pin, work lights, electrically adjustable and heated exterior mirrors, wide-angle exterior mirror heated (left), outside temperature display, rear axle differential lock, cab: L (long), suspension: leaf / air, electric window lifters, 80 A alternator, 16-speed transmission, interior filter: pollen filter, body/chassis: tractor unit, fuel tank: 400 litres, engine: 16.0 litre 375 kW V8 diesel (OM 502 LA), engine brake with constant throttle, wheelbase 3300 mm, fifth wheel coupling: mounting height 150 mm, disc brakes, steel rims 9.00x22.5, cab control, Telligent shifting, Telligent brake system with ABS+ASR, front underrun protection, CB radio pre-installation, telephone/fax pre-installation, immobilizer, central locking incl. key, permissible total weight 26.0 t

Condition: used, functionality: fully functional, machine/vehicle number: 905818.., Year of construction: 2019, operating hours: 1,022 h, load capacity: 1,200 kg, lifting height: 4,300 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, fork length: 1,150 mm, drive type: Elektro, Powered pallet stacker Chassis number: 905818.. Load centre: 500 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Pedoxad Dwspfx Ahdegn Front tyres type: Polyurethane Front tyres condition: 60 - 80% Rear tyres type: Polyurethane Rear tyres condition: 60 - 80% Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: JH Battery type: PzS Battery year: 2019 Battery condition: 60 - 80%