Used Enshu 650 V for sale (35,280)

Condition: new, Year of construction: 2021, V-hold 4-sided, 5-spindle planer, model VH-M 521 - width from 25 to 230 mm - height from 8 to 160 mm 1st from the bottom - 7.5 kW 2nd from the right -7.5 kW 3rd from the left -7.5 kW 4. from the top -11 kW 5. from the bottom - 7.5 kW - 5.5 kW feed from 6 to 36 m / min Nlsdpfx Aohq Rp Hjmnsb - revolutions 6500 / min - diameter of the spindles 40 mm - feed for short, opposite the right spindle - pressure in front of and behind the upper spindle. - manual table lubrication pump - machine weight 3100 kg In stock

Condition: excellent (used), flowmeter Endress-Hauser Pulsmag V + Variomag measuring range:0,0420 m3/sec Power 0 - 20 mA Temperature max. 80 °C lining material: HG Connections DN 150 /PN16 Nljdpfx Asfcb Nbomnob Voltage 220 V measuring range Frequency 50 Hz Length 220 mm Width 260 mm Height 350 mm Weight 13 kg

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift Nsdekn Rz Hepfx Amnslb seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 1991, Manufacturer: Kalfass Pgsb Aeq Htfnsz Hpn Esr Model Number: Universa8060 Rate 40units/min Productdimensions 750x 500 x 140mm Maximum width 800mm Dimensions Welder2200 x 1400 x 1800 mm - Oven 1750 x 1350 x 1300mm -Mat 1700 x 600 x 1100 mm (band width 400mm) Compact L-sealer with shrink oven Nsdpfx Asq Htfnjmnslb Created for the demand of industrialapplications The Kallfass 8060/650 compact L-sealers in combination with high-performance shrinktunnels. The qualities of this series of machines becomeevident when Subjected to hard, continuous use.

Condition: not inspected (used), Year of construction: 1958, functionality: unexamined, machine/vehicle number: 202, wheel diameter: 885 mm, production capacity: 4,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Maximum bolt diameter: 7.7 mm Maximum thread: M8 Maximum shank length: 90 mm Minimum shank length: 20 mm Output: approx. 35/53/70 pcs/min Flywheel diameter: 885 mm Nledpsy D Tfhofx Amnob MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 1,500 mm Machine weight: 2,500 kg External reference: 42

Condition: ready for operation (used), Year of construction: 2006, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040033, rotational speed (max.): 5,000 rpm, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Work area X-axis: 360 mm Work area Y-axis: 120 mm Work area Z-axis: 260 mm Handling area X/Z: 490/260 mm Maximum spindle speed: 5,000 rpm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose, cylindrical: ∅ 140 mm Feed force X/Y: approx. 8,000/10,000 N Feed force Z: 10,000 N Rapid traverse rate X/Z/Y: approx. 80/40/7.5 m/min Acceleration X/Z/Y: 7 m/s² Nlsdpfx Amey T Itroneb MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle ED main spindle: 20 kW Torque at 100% duty cycle ED: 105 Nm Power at 40% duty cycle ED: 27 kW Torque at 40% duty cycle ED: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2005, operating hours: 91,318 h, functionality: fully functional, machine/vehicle number: 040018, rotational speed (max.): 5,000 rpm, controller model: SIEMENS Sinumerik, working width: 120 mm, working height: 260 mm, working length: 360 mm, TECHNICAL DETAILS Working area, X-axis: 360 mm Working area, Y-axis: 120 mm Working area, Z-axis: 260 mm Handling area, X/Z: 490/260 mm Maximum spindle speed: 5,000 rpm Spindle through-hole diameter: 65 mm Spindle diameter at the front bearing: 110 mm Spindle nose, cylindrical: ∅ 140 mm Feed force, X/Y: approx. 8,000/10,000 N Feed force, Z: 10,000 N Rapid traverse rate, X/Z/Y: approx. 80/40/7.5 m/min Acceleration, X/Z/Y: 7 m/s² MACHINE DETAILS Control system: SIEMENS Sinumerik Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Dimensions & Weight Machine dimensions (L x W x H): 2,430 x 2,000 x 2,850 mm Machine weight: approx. 7,500 kg Nlsdpfxoy T Im Ej Amnob Rated power: 20 kW Apparent power: 25 kVA Rated current: 36 A Voltage: 400 V Frequency: 50/60 Hz Operating hours: 91,318 h EQUIPMENT Sliding door: Sheet thickness 5 mm Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./increased): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing volume: 77 g/s Nozzle closing force: 150 kN MACHINE DETAILS Control: CC200 Nodpsy T Hfyjfx Amnelb Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (mounted on the fixed platen)

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: AGO SP40/650, Hahn & Kolb AGO SP40/650 Manual Spindle Press – 40 Ton – Made in Germany Heavy duty industrial manual spindle press manufactured by Hahn & Kolb Stuttgart, Germany. Model AGO SP40/650, built in 1989 with 400 kN pressing force (approx. 40 ton). Extremely robust precision-built machine suitable for pressing, forming, straightening, assembly work, tooling and general engineering applications. Large flywheel operation with adjustable ram and heavy cast construction throughout. Machine Details: Manufacturer: Hahn & Kolb Stuttgart Model: AGO SP40/650 Year: 1989 Press Force: 400 kN (40 Ton) Manual spindle operated Heavy industrial cast construction Precision guided columns Made in Germany Condition: Good used industrial condition. Clean machine with solid operation and very little wear for its age. Nljdpfsy R Dxljx Amnob Ideal for engineering workshops, fabrication shops, toolrooms or industrial production use. Loading available on site. Transport can be arranged. Open to sensible offers.

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE Nlsdpfjy Uwg Rsx Amnob

Year of construction: 2006, condition: good (used), FAM Mantis Belt slicer Nedpfx Aey R El Tomnjlb 2006, stainless, V belt slicer, HMI Touch screen controls, V belt length 2300mm, equipped with cutting wheel that holds 25 knives, up to 7000Kgs per hour, mobile, 3Ph

Condition: like new (used), Large tray sealer direct from UK meat factory where it was packing ground meat in MAP trays. Nlsdsilfkropfx Amnsb We have two identical machines available.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) Nlodpfxexgukbs Amneb The machine can be inspected under power by appointment.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 600 kg, total height: 2,665 mm, total length: 2,440 mm, total width: 1,900 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 4,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 6,651 h, coolant supply: 20 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A very well-equipped DMG Deckel Maho DMC 635 V with relatively low spindle hours. The machine is connected to power and can be seen in operation by appointment. Additional options & accessories: - Operation mode 4 - Internal cooling – 20 bar - Band filter system – 600L - Chip conveyor - Electronic handwheel - Original accordion cabin roof Nodpfx Ajy E N Dcsmnjlb - Rinsing pistol - Approx. 30 pcs. SK40 tool holders (incl. 3D probe) - All original documentation Weight & dimensions: 4,200 kg 2440 (3500 incl. PLC) x 1900 x 2665 mm (LxWxH)

Condition: excellent (used), Year of construction: 2004, Injection molding machine NEGRI BOSSI V1250 1,250 tons Year: 2004 Operating hours: 32,000 Nsdpew Uaw Dsfx Amnolb New screw and barrel

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Nsdpfxoyfh Ixo Amnolb Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), 2 x DCN JetCook vessels, 500 litres and 650 litres, direct from closed Babyfoods facility. All other machinery is available for sale. Nljdpjy I Di Ssfx Amneb

Condition: new, power: 105 kW (142.76 HP), gearing type: hydrostat, fuel type: diesel, color: other, lifting height: 7,600 mm, axle configuration: 4x4, Year of construction: 2024, Equipment: all wheel drive, Drive: Wheel Nljdjx Azb Eepfx Amnob Empty weight: 10.780 kg Chassis type: rigid Make of engine: Yanmar Lifting capacity: 4.999 kg Emission level: Stage V / Tier IV final Rental currency: EUR Production country: FR Please contact KEY-TEC Sales for more information

Condition: used, power: 184 kW (250.17 HP), fuel type: diesel, Year of construction: 2017, operating hours: 3,813 h, Make of engine: Cat Max. working load: 11000 kg Production country: JP Please contact Kristoff Van Havere for more information - Cat 7.1 engine - Roto version Nledpfxey Uq Hqs Amnjb - Perfect condition

Condition: excellent (used), Year of construction: 2021, operating hours: 44 h, functionality: fully functional, HSM V-Press 860 plus vertical baling press, year of manufacture 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of manufacture: 2021 Operating hours: 44 Pressing force: 60 t Drive power: 4 kW Nlsdpfey Uvt Asx Amnob Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time in idle mode: 25 s Theoretical pressing capacity: 12 m³/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors that may occur. The offers are non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by arrangement. The sale takes place at our location, without warranty. Our payment terms are 100% prepayment.

Condition: excellent (used), lifting height: 5,500 mm, Year of construction: 2022, operating hours: 390 h, General information Field of application: Construction Weights Empty weight: 1.403 kg Functional Lifting capacity: 1.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Hook height luffed jib: 425 cm Delivery terms: EXW Transport dimensions (LxWxH): 2,7x0,95x1,9 Latest inspection: 2024-07-15 Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Jekko MPK10V Nedpjvkd Uuefx Amnelb * 2022 * Battery * 390 working hours * 4.25 meter hook height * 5.5 meter vacuum height * Remote control * 1403 kg own weight * 990 kg lifting capacity * Inspection until July 2025 * including documents

Year of construction: 1998, condition: good (used), Pass-through spindle oil cooler Nlsdpfxjd Nmnue Amneb Fabr.SCHMIPKE Type:DK34-V/SO Bj.1998 Goods to CNC BAZ Verbaut. 2.Piece of forgo price each. Piece. Building mass: L1.4m B0.5mH1m Gewicht.ca.250kg.

Condition: good (used), FOR SALE High-Precision Machining Center SCHAUBLIN 48-V Swiss Quality – Exceptional Precision – Ready for Operation Technical Specifications: Axes Travel (X/Y/Z): 480 x 400 x 430 mm Njdpfoy Sgdtsx Amnolb Control: FANUC Series 0i-MD Spindle: High Speed (up to 10,000 – 12,000 rpm) Tool Holder: BT 40 / ISO 40 Table: approx. 600 x 400 mm Manufacturer Data (Source: IMG_8324.jpeg): Model: 48-V CNC Origin: Made in Switzerland Power: 19 KVA / 36A Serial No.: 352251 BT MACHINES PURCHASE AND SALE OF ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: used, Year of construction: 2019, control Fanuc Series 31i - B workpiece length - max. 300 mm Nodpsy Tprpjfx Amnjlb grinding wheel diameter 356 mm grinding wheel width 75 mm quill stroke 45 mm

Condition: good (used), mileage: 142,217 km, power: 140 kW (190.35 HP), first registration: 06/2018, fuel type: diesel, tire size: 245/45R18, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,370 mm, total width: 1,930 mm, total height: 1,880 mm, loading space length: 1,660 mm, loading space width: 1,420 mm, loading space height: 1,290 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional options and accessories = - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/Cassette - Rear view camera - Partition wall = Notes = Configuration: 4x2, Payload: 742 kg, Unladen weight: 2,358 kg, Gross weight: 3,100 kg, Unbraked towing capacity: 750 kg, Braked towing capacity on main axle: 2,500 kg, Tow bar, Alloy wheels, Cab type: Double cab, Cruise control, Air conditioning, Number of airbags: 6, Rear wiper, Parking assistance: front and rear, Tinted windows, Electric windows, Electric mirrors, Partition wall, Radio/Cassette, GPS navigation, Color: silver, metallic, Rear view camera, Lighting type: LED lamp, Climate control, Bluetooth, Engine power: 140 kW (188 Hp), Fuel: diesel, Euro: 6, Drive type: timing chain, Transmission: automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side walls lined, Roof rack: none, Side doors: 2, Side windows: 4, Rear closure: tail lift, Central locking, Seats: 5, Seat configuration: 1+1+3, Upholstery: leather, Seat adjustment: manual, L3 XL Double Cab 190Hp Electric Doors + Tailgate 360 Camera Towbar PDC LED Euro6!, Spare wheel, Tire type: summer tires = Further information = General Information Number of doors: 2 Registration number: V-52-PLK Axle configuration Tire size: 245/45R18 Brakes: disc brakes Suspension: coil spring suspension Axle 1: Tire tread left: 4 mm; Tire tread right: 4 mm Axle 2: Tire tread left: 5 mm; Tire tread right: 4 mm Weights Unladen weight: 2,358 kg Payload: 742 kg Gross vehicle weight: 3,100 kg Functional Nodpoyylc Refx Amnjlb Loading height: 52 cm Interior Upholstery: leather Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Lease price: €560 per month (panel van, 72 months); Please ask for further information and terms