Used Eddy Current Separator for sale (12,299)

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Njdex A Imzepfx Aqwoda Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm strip thickness: 10 - 20 mic Ndsdpo A Dimsfx Aqwoa

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm Njdpfxjgryk Nj Aqwjda strip thickness: 10 - 20 mic

Year of construction: 2020, operating hours: 3,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: SN_20-96, Wet dust collector from Absaugwerk, model W 3000, for sale We are offering a wet dust collector from Absaugwerk for sale. This unit is the ideal addition to grinding and deburring machines. It is particularly suitable for extracting aluminum grinding dust, as sparks are reliably extinguished in the wet dust collector. Optionally, the machine can be equipped with a HEPA filter, making it also suitable for processing stainless steel. Technical data: Manufacturer: Absaugwerk Machine type: Wet dust collector, series W 3000 Motor power: 7.5 kW Voltage: 400 V / 50 Hz Discharge: Drain valve Ndjdpfx Aozicy Neqwoa Filling: Automatic via solenoid valve The machine is no longer in use at our facility but is in working condition and can be inspected and tested at any time. If you have any questions or are interested, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Ndedpfochuvrjx Aqwoa Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Year of construction: 2017, condition: used, Manufacturer : Eclipse Magnetics Model : Housed Grid ECHD150 Type : Housed Easy Clean Grid Magnetic Separator Year: 2017 Atex : Ex II1/2DcTX + II1/2GIICcTX Input / output : Ø 150 mm Machine dimensions with base: 100 x 90 x 120 cm Machine dimensions without base: 208 x 214 x 270 mm Njdpfxox R D H Aj Aqweda Weight : 40 kg

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables Njdpfoyc Idbox Aqwoda • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 1,600 mm, total height: 2,150 mm, overall weight: 1,140 kg, electrical fuse: 63 A, input voltage: 400 V, drive type: Elektromotor, Attachment wind sifter TUKWIND PRO 18. The combination blower with suction and compressed air in one station. - Compact separation system for attachment to existing screening technology (mobile & stationary) - High suction and compressed air performance – infinitely adjustable by built-in frequency converter - Electric drive, therefore very low maintenance costs - 18.5kW power requirement; power plug: 63A CEE A wide range of applications is enabled by the robust design and individual adaptation to conveyor belts, etc. Nedjwhfgrepfx Aqwjda Ideal size for drum screening machines of the 5-6m class: (SM518, SM620, T5, T50, T6, T60, MAXX, Nemus, Cribus 2800, Cribus 3800, and more) Fields of application: construction waste recycling (Styrofoam, plastic films, wood chips, hard plastic pieces), composting (plastic films), RDF cleaning (plastics), brick chipping cleaning, and more.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. Nodpjwhfqwsfx Aqwoda - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: ready for operation (used), * Brand: Titech Tomra * Model: optical separator Ndedpfoywnf Njx Aqwea * Type: Autosort NIR1 S2000 X-L

Condition: ready for operation (used), * Brand: Titech Tomra Ndjdpfx Aqjywnf Aowoa * Model: optical separator * Type: Autosort NIR1 S2000 X-L * Incl.: belt conveyor with length 5000 mm, * Beltwidth: 2000 mm.

Condition: new, functionality: fully functional, Details: Manufacturer: KAESER Item: Oil Separator / Oil Separator Cartridge Part number: 6.2013.0 Size: Ø 275 x 462 mm Condition: New, in original packaging (OVP) Quantity: 2 units available Application: For KAESER screw compressors Maintenance / Service / Spare part Njdpfx Aoy E Rxnoqwsda Advantages: Original KAESER spare part Immediately available Ideal for stockpiling or maintenance

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale Nedpfx Asglvwgoqwsda With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Condition: good (used), functionality: fully functional, overall weight: 4,250 kg, “Steinert UME 110 120 P” for Sale Ndodpfsu S R Ekjx Aqwja Manufacturer: Steinert Type: UME 110 120 P 6,3 kW / 66,9 A. / 94 V. 100% ED Magnet L x W: 1.206 x 1.150mm Conveyor Belt: 1.200mm (new) AA.: Ca. 2.100mm Weight: 4,25 Tons With new transformer rectifier of 380V. Primary.

Condition: new, Unused BM Overband Magnets. Different types of Magnets with sizes from 835 x 505 mm to 1.450 x 810 mm. Different belt widths from 550 mm to 900 mm. Large stock of used and unused Overband Magnets on our website Please contact us for a Overband Magnet. Ndjdegfb T Uspfx Aqwoa

Condition: good (used), functionality: fully functional, “IFE MPL 1700 J-E” for Sale Ndodeu Tkrmopfx Aqwsa Manufacturer: IFE Aufbereitungstechnik GmbH Type: MPL 1700 J-E Magnet L x W x H: 1.075 x 1.710 x 353 mm. AA.: Ca. 1.850 mm. Belt widthness: 1.800 mm. (New Belt) Weight: 3.280 KG

Condition: new, Year of construction: 2026, Cyclone Dust Separator with Waste Container and Vacuum Hose Included The cyclone dust separator with waste container and vacuum hose is a practical solution designed for efficient dust extraction in woodworking workshops and industrial environments. The separator allows two machines to be connected simultaneously, improving the efficiency and convenience of the dust collection system. The dust separation process is based on centrifugal force. Extracted dust particles are separated from the airflow and collected in containers located beneath the cyclone. The separator efficiency reaches 90–95%, significantly reducing the amount of dust reaching the filtration system. Device description Metal separator housing, Metal waste collection container, Mobile base, Ergonomic handle, Viewing window for checking the container fill level, Nedpfxsvu Uugo Aqwoda Quick-release clamps for easy bag installation. The cyclone must be connected to a fan or dust extraction system. Operating principle In the cyclone separator, contaminated air enters the cylindrical chamber and begins to rotate. Due to centrifugal force, heavier particles suspended in the airflow are pushed toward the outer walls of the chamber. As they lose speed and kinetic energy through contact with the cyclone walls, they fall downward under the influence of gravity and collect in the container. The lightest sawdust particles are then captured by the filter cartridge and directed into the collection bag, while cleaned air exits through the sides of the filter. Technical specifications Parameter Specification Tank capacity 118 L Bag dimensions Ø500 x 850 mm Inlet diameter 125 mm Inlet adapter diameters 1 x Ø125 / 2 x Ø100 mm Outlet diameter 125 mm Outlet adapter diameter Ø125 mm / Ø100 mm Weight (net/gross) 24 / 26.5 kg Overall dimensions 785 x 508 x 1545 mm Note: The fan, dust extractor, and Ø100 mm hose are not included in the set.

Condition: new, Year of construction: 2026, The magnetic separator is an industrial device designed for continuous purification of coolants and oil-based fluids from ferromagnetic particles generated during machining processes. In closed-loop systems, it effectively removes metal chips and fine particles from the working medium, stabilizing cooling and lubrication parameters while reducing wear on pumps and installation components. Magnetic coolant separator – key benefits in maintaining clean machining fluids In production environments, coolant operating in a closed circulation system is constantly exposed to metallic contamination. Ferromagnetic particles act as an abrasive material – accelerating pump wear, causing deposits in channels and nozzles, and reducing the stability of the lubricating film. As a result, the risk of surface scratches increases, machining quality decreases, and downtime related to filtration and coolant replacement becomes more frequent. A magnetic separator for machining fluids solves this problem by automatically and continuously capturing metal particles without interrupting the production process. This allows the working medium to maintain consistent operating parameters, while the cooling system remains stable even under intensive working conditions. What do you gain by implementing a magnetic separator in a coolant system? Continuous coolant cleanliness – without the need to stop production. Protection of pumps and circulation components by reducing abrasive particle contamination. More stable machining quality (fewer scratches and improved process repeatability). Extended coolant service life and reduced disposal costs. Lower failure rates and reduced maintenance costs of filtration systems. Improved waste management – automatic removal of collected chips outside the working area. Why is magnetic separation more effective for removing ferromagnetic particles? Unlike traditional mechanical filters, which require periodic cleaning and may experience reduced flow due to filter clogging, magnetic separation operates continuously with minimal maintenance requirements. A magnetic coolant separator removes ferromagnetic particles consistently, maintaining stable fluid flow and high machine availability. Design and operating technology The device has been designed to mechanically and continuously separate metallic contaminants from process fluids. The main working element is a stainless-steel magnetic drum, which rotates and attracts ferromagnetic particles from the flowing coolant. The collected contaminants are then removed and transported outside the working area. The removal of collected particles is carried out by a shaft system: Ndodpfsycc Rpox Aqwoa Magnetic shaft – responsible for capturing and holding metal particles during the separation process. Rubber-coated pressure shaft – stabilizes the removal of contaminants and assists in directing them into the waste container. Standard equipment Magnetic separator with stainless-steel magnetic drum Rubber-coated pressure shaft Working tank Electric drive Technical specifications Parameter Value Width of rubber-coated pressure shaft 140 mm Diameter of rubber-coated pressure shaft 65 mm Width of magnetic shaft 140 mm Diameter of magnetic shaft 110 mm Inlet connection 50 mm Outlet diameter 53 mm Motor power 0.25 kW Capacity up to 25 l/min Weight 35 kg

Condition: excellent (used), Year of construction: 2000, Lima RM 700 DSP Separator The DSP Deboner is specially developed to separate meat from hard bones as for instance from pork bones to obtain high quality structured meat at optimal yield and low calcium content. This advanced machine is designed for the food processing industry, ensuring efficient separation of meat from bones with maximum productivity. Manufacturer: Lima Model: RM 700 DSP Year: 2000 Ndsdpfsy D Nl Rjx Aqwea Capacity: Up to 4.000 kg/h Power supply: 400V / 50Hz / 3Ph Machine dimensions LxWxH: 2.400x950x1.800 mm Machine weight: 1.400 kg.

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm Nedpfjqvmpfox Aqwjda ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Pictures, prices, and specifications may differ.

Condition: good (used), Approx. 490 units of shelf dividers (free-standing) for 80cm shelving units, SSI Schäfer – used: Prices per unit, ex works: €2.50 (net), disassembled, packed, and loaded! Ndedpfx Ajki Tmreqwsa Manufacturer: SSI Schäfer Type: TRF-D 4817 G Year of manufacture: unknown Height: approx. 17cm Depth: approx. 76cm – for a shelf depth of 80cm Galvanized New price: approx. €8.00 Condition: good Available: immediately Location: Frankenberg (Saxony) warehouse

Condition: good (used), Approx. 200 units of shelf dividers (freestanding) for shelving systems, type 2510, SSI Schäfer – used: Ndsdpfx Aqskhd Uiswoa Prices per unit, ex-location: €2.00 (net), disassembled, packaged, and loaded for transport! Manufacturer: SSI Schäfer Type: TRF 25 10 Year of manufacture: unknown Galvanized New price: approx. €5.00 Condition: good Available: immediately Location: Frankenberg warehouse (Saxony)

Condition: used, Year of construction: 2014, Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Ndodpowkbfvsfx Aqwja Controling and pneumatic included Food-safe with stainless steel design Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Cyclone height: 6000 mm Ndedpfxjwfrl Aj Aqwoa

Condition: used, Oil Mist Extractor, Centrifugal Oil Mist Extractor, Used Machine Manufacturer: Innovations-Center Type: Eonag 3000 Year: 2010 Overall dimensions: 1000 x 570 x 1750 mm Ndjdeyn Rkuspfx Aqwoa Electrical data: 400 V; 50 Hz; 2.2 kW * 4000 m³/h * 84 dBA * 2800 L/min