Used Danfoss Frequency Inverter for sale (6,816)

Condition: used, BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance, open-circuit cooling tower from the S1500E series manufactured by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are priorities. Technology Patented BACross III fill media system, which allows for easy inspection of the fill to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance access: A large, inward-swinging access door and internal maintenance platforms allow technicians to conveniently perform inspections while standing inside the unit. Hygiene control: The design minimizes standing water and protects against sunlight through special air inlet elements, reducing algae growth. Flexibility: The single-sided air intake allows the cooling tower to be installed even in confined spaces or directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial cooling: Used in factories for process cooling. HVAC: Used in large building complexes as part of a central chiller system. Refrigeration: Used as a condenser in commercial refrigeration systems. Cooling Capacity An open evaporative cooling tower does not have a fixed, single kW cooling capacity, as the actual performance depends entirely on the thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or HVAC standard conditions, the nominal cooling capacity of this model is in the range of approximately 1,200 kW to 2,100 kW. Nodpfx Akoynkbmjielh Why does the cooling capacity vary? Wet-bulb temperature (outside air): The cooler and drier the ambient air, the more water can evaporate, and the higher the cooling capacity. Water temperatures: The performance changes significantly depending on the warm water inlet temperature (e.g., 35 °C) and the cold water outlet temperature (e.g., 29 °C). Air volume flow: According to BAC's technical data, the S15E 1018-10 LE model actively moves 60.0 m³/s of air through three installed 11.0 kW fan motors. If this air volume is reduced by a frequency inverter (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This is the most important thermodynamic limit. It describes the difference between the desired cold water temperature and the physically determined wet-bulb temperature. The closer the cold water is cooled to the wet-bulb temperature (smaller approach), the less kW of power the tower can provide. Technical Data: Fan and Air Data - Air volume flow: 60.0 m³/s (generated in suction operation) - Fan motors: 3x 11.0 kW (axial fans) - Technology: Integrated belt drive - Water flow: 198 l/s Hydraulic Connections - Water inlet: 1x DN 250 (nominal size ND 250 mm) - Water outlet: 1x DN 300 (nominal size ND 300 mm) - Make-up water connection: 1x DN 40 (ND 40 mm) - Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm) Dimensions and Weights - Operating weight: 11,446 kg (including water fill up to overflow) - Shipping weight: 5,350 kg (empty weight) - Heaviest single part: 3,114 kg (for installation)

Condition: good (used), Year of construction: 2011, functionality: fully functional, cooling capacity: 109.4 kW (148.74 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,404 kg, input voltage: 400 V, total width: 1,260 mm, total length: 3,300 mm, total height: 2,160 mm, warranty duration: 6 months, AIRCOOLED CHILLER MTA TAE EVO 602 109.43 KW Cooling capacity: 109.43 kW / 31.11 tons (12/7 — 35°C) Year of manufacture: 2011 Options: Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 2 pcs. Danfoss SZ160T4RC (scroll) + 2 pcs. Danfoss SZ125S4RC (scroll) Type of refrigerant: R407C Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara FHE 40-160/40/P, buffer tank 500 l. Dimensions: 3.3x1.26x2.16 m Weight: 1404 kg Working hours: 2490/3170/2180/3340 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Njde Abkigspfx Akislh Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE MODEL HOTMASTER, GLUE MELTER AND ROLLER PRESS The line includes: 1 feeding conveyor with a COSMA cleaning brush 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLYING MACHINE 1 OSAMA central conveyor 1 press (6 pressing rollers, 3+3) 1 COSMA discharge conveyor Metering and application rollers with resistors/oil heating system of 8 kW x 2 - No. 03 motors at the end of the application and metering rollers, independently controlled - Adjustable speed via no. 03 electric frequency regulators with an automatic "reverse" rotation system for the rollers to clean the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display - Top applicator 3 kW + bottom applicator 3 kW + top metering device 0.75 kW - Part movement control 0.55 kW - Lifting torque of the top rollers 0.18 kW - No. 02 motorized steel rollers at the machine inlet - No. 02 motorized steel rollers at the machine outlet - Stainless steel tray for machine cleaning - The machine is programmable to heat the rollers automatically without any control or operator intervention - Machine ready for the application of glue guns for the application of PUR glue, without glue guns - Machine ready for integration into a production line * No. 01 tube for PUR glue fume extraction, 145 mm diameter. HIGH-TECH AUTOMATIC 6-ROLLER PRESS MODEL CLR/6-1300 STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: - Inverter speed variator motor - Independent pressure adjustment system for each pair of rollers, with a shared pressure sensor display between the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure No. 02 + 02 (four) rubber pressing rollers, Shore hardness 90 +- 5 Shore No. 02 (two) rollers positioned in the middle, made of chrome steel Roller diameter: 300 mm Useful working width: 1300 mm Minimum/maximum working height: 0-100 mm Video available upon request. Nlodpoz Ng Agofx Akijh

Condition: excellent (used), CATALOGUE NUMBER: 72133 TECHNICAL DATA - max. cutting height: 180 mm - track width: 400 mm - shaft width: 370 mm - shaft diameter: 60 mm - max. blade diameter: 300 mm Nlodpfezrmn Ajx Akieh - blade arbor diameter: 80 mm - min. workpiece length: 630 mm - max. workpiece width: 600 mm From above: - pneumatic pressure roller - pawls - pressure shaft, metal, 2 pcs - pawls - shaft with blades - smooth pressure shaft - pawls - smooth pressure shaft From below: - metal shaft, pull shaft, toothed, 2 pcs - pawls - track - shaft with blades - track - stepless feed rate adjustment via frequency inverter - main motors: 2 x 55 kW - feed motor: 4 kW - hydraulic lifting of the machine body, up/down - hydraulic adjustment of the blade shafts - pump motor: 0.37 kW - central lubrication - diameter of the dust extraction nozzle: 1 x 300 mm, 1 x 380 mm - dimensions (L/W/H): 3200 x 2350 x 2000 mm - weight: approx. 5500 kg ADVANTAGES – Made in Italy – Two-shaft design – Multi-blade saw, used, very good condition Net price: 218,900 PLN Net price: 50,507 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (The price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2011, CATALOGUE NUMBER 8016 TECHNICAL DATA - Range of diameters of processed pins: 60-160mm - Max. diameter of input material: 210mm - Min. length of input material: 1000mm - Max. allowance for machining per side: 30mm - Fitted sleeve with a diameter of 90mm - Cutting head drive motor: 22kW - Smooth feed speed adjustment + forward/reverse via frequency inverter - Feed motor: 1.5kW In sequence: - Infeed trough - Toothed pull rollers: 6 pcs - 4-knife cutting head - Smooth pull rollers: 6 pcs - Includes 10 sleeves - Dimensions (L/W/H): 2800x1300x2150mm - Weight: approximately 2200kg Nlsdpfxszrui Ie Akijh ADVANTAGES – Manufactured by the Polish brand SAFO – DTR+CE documentation included – Includes sleeves – Used turning machine, very good condition Net price: 98,900 PLN Net price: 23,000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number 7863 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade arbor diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from recoiling) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth, metal sliding rollers - from below: - guide strip - ejectors - track - laser - central track lubrication - smooth feed speed adjustment on a frequency inverter - feed motor 1.5kW - main motor 26kW - brake - dust extraction nozzle diameter 200mm - overall dimensions L/W/H 1700x1400x1600mm - weight approximately 1700kg ADVANTAGES – Made in Italy – With laser – Very good condition – Used multi-blade saw Net price: 39900 PLN Net price: 9279 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations) Nlodpfx Aoztaanskish

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used, well-maintained, fully automatic band saw machine "JAESPA", model: Comfort 260A Cutting range for round/square/rectangular materials: 260/260/320 x 200 mm Band speed: 15-100 m/min, continuously adjustable via frequency inverter Hydraulic feed, continuously adjustable Nlsdpfx Aksz Tdk Aeijh Feed roller length: 2000 mm Band dimensions: 3660 x 27 x 0.9 mm Technical data and dimensions: Subject to change without notice.

Condition: ready for operation (used), Year of construction: 2005, number of axes: 4, total width: 3,830 mm, overall weight: 6,000 kg, spindle motor power: 7,500 W, product length (max.): 5,750 mm, spindle speed (max.): 18,000 rpm, This 4-axis IMA BIMA 300 CNC Wood Machining Centre was manufactured in 2005. It features an impressive X-axis machining range of 4300 mm and a Y-axis machining range of 1400 mm. The spindle power is 7.5 kW with a maximum speed of 18,000 rpm. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 300 machine we have for sale. Contact us for further details. Working area • X-axis machining range: 4300 mm (4600 mm per manual; to be confirmed) • Y-axis machining range with main spindle and Ø20 mm tool: 1400 mm • Y-axis machining range with drilling unit (all vertical spindles): 1100 mm • Maximum workpiece height above vacuum cup surface: 125 mm • Maximum workpiece thickness: Depending on equipment and application • Working height: approx. 950 mm • Two-zone working area without pendulum machining: 2 × 2050 mm; central clearance: 200 mm • Two-zone working area with pendulum machining: 2 × 1750 mm; central clearance: 800 mmMain spindle • Tool interface: HSK-F63 • Taper diameter: 38 mm • Automatic tool clamping (clamping force: 11,000 N; unclamping force: 20,400 N) • Maximum tool weight: 6 kg • Rotation direction: Programmable CW/CCW • Drive: Three-phase motor with frequency inverter • Lubrication: Factory-lubricated • Cooling: Air-cooled • Integrated CNC-controlled rotary axis for aggregate positioning through 360°, with torque support and pneumatic connectionAxis speeds • Rapid traverse X/Y: 60 m/min • Rapid traverse Z: 30 m/minVacuum, extraction and compressed air • Required compressed air pressure: 7 bar • Extraction connection diameter: 250 mm Nlodj Ad Hhdopfx Akish • Required extraction air velocity: 28 m/s • Required extraction airflow: 4,950 m³/h • Vacuum pump capacity: 90 m³/h Additional equipment • 90° angle drilling aggregate • 3x HSK tool holders

Condition: used, DEWETRON High-End Power Analyzer DEWETRON DEWE3-PA8-RM / DEWE3-RM8 4-Phase Power Analyzer with TRION3-1810M-PA Up to 10 MS/s – modularly expandable 19" measuring system For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design with a built-in TRION3-1810M-PA power module and the connection and measuring accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM Chassis type plate: DEWE3-RM8 Revision: 1.1 Design: stationary rack-mount power analyzer TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measuring channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measuring range of the power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Power supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to the type plate: 500 W Nsdpfx Akjzyl Sisijlh Made in Austria Sensor power supply: Integrated redundant sensor power supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Features: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current/measuring channels I1–I4 CNT1 / CNT2 TRIG DC AUX Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Integrated redundant sensor power supply Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Condition: Used Device can be switched on Optical condition according to pictures Dimensions 442 × 435 × 222 mm Weight: 15.8 kg Scope of delivery: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x installed TRION3-1810M-PA power module Measuring, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures The table or other items shown in the photos are not included in the sale unless explicitly mentioned. Shipping via UPS freight service is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), MADO SUPRA 70 cutter (model MSM 765 SL). The cutter is equipped with an automatic discharge system, a digital variometer for speed measurement, and stepless speed adjustment for the blades up to 5,000 rpm. The machine has been serviced and is ready for immediate use. Nlodpjzqyq Ijfx Akieh Investments made: • new frequency inverter • new cover • new stainless steel discharge chute • service Invoices for all installed parts and performed service work are included.

Condition: excellent (used), CATALOGUE NUMBER 6145 TECHNICAL DATA - max width of workpiece 1100mm - max height of workpiece 140mm 3 units: 1) ribbed rubber roller for calibrating, 15kW 2) ribbed rubber roller for calibrating, 11kW 3) ribbed rubber roller for calibrating, 11kW from above: - sliding metal roller - sliding rubber roller - unit - 2 sliding rubber rollers - unit - 2 sliding rubber rollers - unit - sliding rubber roller from below: - infeed table 3600x1000mm - feed speed adjustable via frequency inverter, 0.25kW - pull belt - 3 sliding rubber rollers, output - pneumatic belt oscillation with photocells - belt blowing - electric table lifting - lifting motor 0.75kW - smooth feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - extraction nozzle diameter 110mm, 80mm - working pressure 6-8bar - extraction nozzle diameter 3×150, 3x200mm - overall machine dimensions L/W/H 3400x2300x2800mm - feeder dimensions L/W/H 3000x1300x900mm - pump dimensions L/W/H 600x950x940mm - weight approximately 5000kg Nsdpjzw Dtmofx Akislh Net price: 32900 PLN Net price: 7650 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, workpiece width (max.): 70 mm, workpiece length (max.): 100 mm, height adjustment type: electric, Equipment: CE marking, For sale: a professional edge banding machine, FELDER FORMAT4 tempora F600 60.06 glueBox, manufactured in 2021. The machine was purchased new and has been used by a single company since its acquisition. It is in very good condition, regularly cleaned, and serviced. It has only been used for 300,000 linear meters. Machine features: X-motion PLUS – control with an 18" Smartouch screen memory for work programs and precise adjustment of parameters feed speed of 10 / 18 m/min pre-milling unit with diamond cutters additionally reinforced pre-milling unit, 2 × 1.5 kW pre-milling unit with a height of 64 mm automatic edge feeding and the option of feeding wooden veneer strips magazine for wooden veneer strips, 120 mm pneumatic pressure unit guillotine shears for edges from rolls, 0.4–3 mm saw unit for trimming with two motors and frequency inverters multi-functional x-motion PLUS milling unit with independent upper and lower motors motorized adjustment of the unit in 2 axes unit for rounding the corners of boards, softforming and postforming profile edge trimming unit – R2 mm upper and lower polishing units sprayer for cleaning agent sprayer for anti-adhesive agent on the feed side application of lubricant for delicate edge surfaces Nedpfx Ao Aara Rskislh table with air cushion and retractable support extended feed table automatic central lubrication pneumatic-mechanical lock to prevent premature feeding of the next piece LED lighting Additionally: The machine has two sets of heads. One set is currently in use, while the second set is new and has not yet been sharpened. The machine is ready to operate, without the need for any additional investment to start production. The machine can be inspected and tested while in operation.

Condition: used, High-frequency ignition device, heating, gas and oil burners -Type: E4718/54 -Dimensions: 85/70/H40 mm -Price: per piece Nsdpfod Iy Nrjx Akiolh -Number: 12x available -Weight: 0.3 kg/piece

Condition: ready for operation (used), KEB 07F5A1A-2E2F Combivert frequency inverter SN:304508062 / 1898708, used, in good condition, 100% fully functional, scope of delivery as per photos. Nlodpfex Etz Esx Akijh

Condition: ready for operation (used), KEB 12.56.200-A349 Combivert frequency inverter SN:95460178/156094, used, in good condition, 100% fully functional, delivery as shown in photos. Nodpfxex Etz So Akislh

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter Nedpfx Aexukbxskielh 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: like new (used), operating hours: 349 h, functionality: fully functional, input voltage: 400 V, input current: 1,037 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, year of last overhaul: 2026, continuous power: 630 kW (856.56 HP), Equipment: type plate available, Exact model designation: Schneider MX eco 4V630 Output power and output current: 630kW | 1188A ME4C63AAA ° With test certificate! ° Only 349 motor operating hours - according to the manufacturer, over 100,000 possible! ° Easy operation thanks to the integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included ° 2 additional control cabinets with various components tailored to the inverter included (buying drive without extra components possible) The following additional components are installed (see pictures): ° 2 pcs. RFI 480/600-TN (RFI filters) ° 2 pcs. NH fuse switch disconnectors, size 3 | I = 630A ° 2 pcs. ABB AF580-30 | I = 800A (Power Contactor) ° 2 pcs. ABB AG09083735 (Circuit Breaker) ° SMF 480/1200 | 1200A (Sine Wave Motor Filter) ° 2 pcs. ABB AF750-30 | I = 1050A (Power Contactor) Nlsdjx U Dvropfx Akish Only 1 unit left in stock! This item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the item's visual condition. Fully functional and ready for immediate use.

Condition: used, PCB handling equipment from E-Flex SMT microsystems: WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 WHM-201SDNTM-I (2022) price: €2,899 WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 Nlsdsx Tzn Aopfx Akioh WHM-200SD3TM-IA (2022) price: €3,439 WHM-200SD3TM-l (2022) price: €3,738

Condition: excellent (used), Year of construction: 2008, operating hours: 126,772 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,614 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Kaeser DSDX243SFC, 132 kW with 8.5 bar and 26.90 m³/min. Frequency inverter integrated. New compressor stage installed at around 45,000 operating hours. Nodpeyhakkofx Akislh

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Nlsdsxbnyrspfx Akijh Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Year of manufacture: 2005

Year of construction: 2013, condition: used, NH3 refrigeration system for cooling glycol and brewing water, consisting of the following components: - NH3 separator brewing water 890 l (T0 = -0.5°C) - NH3 separator glycol 647 l (T0 = -6 °C) - 3 x piston compressors (Bitzer type W4GA) - 2 x brewing water pumps - Plate heat exchanger as brewing water cooler Q0 = 200 kW - Evaporation condenser - Water tank approx. 470 hl - Glycol tank 80 hl + 2 x glycol pump - Plate heat exchanger as glycol cooler Q0 = 100 kW - High pressure collecting vessel 830 l - Danfoss frequency inverter type VLT HVAC Additional title: NH3 Cooling plant Cooling capacity Q0 brew water: 200 kW Cooling capacity Q0 glycol: 100 kW Njdpfx Akjxbpamjielh Evapotation temperature t0 brew water cooling: 0 °C Evaporation temperature t0 glycol cooling: -6 °C Current: 185 A / 250 A Features: 2 x NH3 separators (t0 = -0.5 °C; t0 = -6 °C); 3 x piston compressors; 2 x brewing water pumps; water cooler Q0 = 200 kW; evaporation condenser; water basin; high-pressure collection vessel; glycol tank + 2 x glycol pump; Glycol cooler Q0 = 100 kW; Danfoss frequency inverter type VLT HVAC

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE21-8AA0 A5E33512929 FS: D Njdpfxexni S No Akijlh -Input: DC 510-720 V 43 A -Output: 3 AC 0-480V 18A/18A 0-550Hz A -Number: 3x module available -Price: per piece -Dimensions: 480/50/H270 mm -Weight: 7.9 kg/piece

Condition: good (used), Input: 3 / PEAC 400/480V 12.0A, 10.0kVA, 50/60Hz Output: 3 / PEAC 0-480V 13.0A, 10.8kVA, 0-480Hz ID no.: 13180666 Serial no.: 000010 Width: 135 mm Height: 350 mm Depth: 250 mm Weight: 6600 g Condition: Good, second-hand Nlodpfxoyrq Ibe Akieh

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min Nedpfx Akoy Dvpvsijlh - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Nedpfx Aewa Uwdskielh Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition