Used Cts Temperature Test Chamber T-30/950, -30°C To +80°C for sale (106,511)

Condition: used, Vötsch Type: VCS³ 7034-5 Vötsch Climate Testing Chamber, Water-Cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Ijdpeziyx Njfx Akpotn Data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side opening: 50 mm Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 9 kW, Rated current: 20 A Fuse, on customer's side: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Isdpfx Akjzimfvjpstn Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Itjdpfszg Tpcex Akpon Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, RS Simulators Type: Walk-in climate simulation chamber KKC 22/45 Water-cooled Technical data: Ijdpjzg Txdjfx Akpjtn Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.5 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, TIRA Type: Walk-in climate simulation chamber TTZ 4008 S(m) Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 8 m³ Itedozg Twmspfx Akpjn External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, RS Simulators Type: KS 300 / 75 Water-cooled climate test chamber 300 liters Internal dimensions: Width 670 mm, Depth 670 mm, Height 670 mm Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Itedpfx Ajzd R Auekpen Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Weight: 630 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 32-bit technology Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm Itodpfx Ajph U Ayokpon You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Thermotron Type: Thermotron SE-1000-6-6 Thermotron temperature chamber Water-cooled Interface is not functioning! Thermotron temperature chamber SE-1000-6-6 Internal dimensions: W x D x H 1000 x 1000 x 980 mm Working area volume: approx. 980 liters Temperature range: -70°C to 180°C Total heating rate: approx. 4.1 K Total cooling rate: approx. 1.2 K Heating rate in °C/minute -65° to 71°C: 6.8°C Heating rate in °C/minute -65° to 180°C: 5.6°C Heating rate in °C/minute -40°C to 85°C: 6.5°C Cooling rate in °C/minute 85° to -40°C: 4.7°C Cooling rate in °C/minute 71° to -65°C: 3.7°C Cooling rate in °C/minute 180° to -65°C: 4.3°C External dimensions - W x D x H: 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE 35 A Refrigerant: R508B and R404A Approx. weight: 900 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Isdpozd R T Hofx Akpjtn Condition: used Scope of supply: (See image) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Thermotron Type: Thermotron SE-1000-5-5 Water-cooled Thermotron temperature chamber SE-1000-5-5 Dimensions of the working area - WxDxH: 102 x 100 x 97 centimeters Working area volume: 986 liters Temperature uniformity: ± 0.5°C Temperature range: -70°C to 180°C Temperature control tolerance: 0.3°C Overall dimensions - WxDxH: 122 x 188 x 218 centimeters Electrical requirements 400/3/50 32.4 A Refrigerant: R-404A / R23 Approximate weight: 862 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant Itjdpfjzd R S Nox Akpsn 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Thermotron Type: SM-8-8200 Thermotron environmental test chamber, water-cooled Working area volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to +180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx. 400 kg Internal dimensions: Width 610 mm x Depth 610 mm x Height 610 mm External dimensions: Width 890 mm x Depth 1240 mm x Height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating time in minutes -65°C to 71°C: 17 Heating time in minutes -65°C to 180°C: 43 Heating time in minutes -40°C to 85°C: 16 Iodezd Snropfx Akpotn Electrical requirements in full-load amps 230/3/60: 19 Electrical requirements in full-load amps 230/1/60: 25 Electrical requirements in full-load amps 220/1/50: 27 Cooling time in minutes 85°C to -40°C: 32 Cooling time in minutes 71°C to -65°C: 54 Cooling time in minutes 180°C to -65°C: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Espec Type: PHP - J3 Technical data: Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate testing chamber For your peace of mind as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with refrigerant that complies with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) Isdpozgtahofx Akpjtn (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: Walk-in climate simulation chamber WK 50 / 40-120 Air-cooled Technical data of the climate chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5 °C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % RH Humidity tolerance: +/- 5.0 % RH Itedezg Txqspfx Akpen Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Itjdpjxqf Sdefx Akpsn

Condition: excellent (used), Year of construction: 2016, Machine designation: VC 330H/200V/80 Combi Clamping unit: Clamping force: 80 tons Opening stroke: 458 mm Ejector stroke: 100 mm Ejector force: 39.8 kN Injection unit 1: Screw diameter: 25 / 30 / 35 / 40 mm Max. swept volume: 79 / / 154 / 201 cm³ Screw speed max: 400 / 425 / 400 / 320 rpm Screw speed max current: 425 rpm Injection rate: 67 / 97 / 132 / 172 cm³/s Injection rate increased: 50 / 71 / 97 / 127 cm³/s Specific injection pressure: 2401 / 2181 / 1595 / 1225 bar Specific injection pressure increased: bar Nozzle stroke: 500 mm Nozzle contact pressure: 48.9 kN Injection unit 2: Screw diameter: 15 / 18 / 22 / 25 mm Max. swept volume: 18 / 25 / 99 / 49 cm³ Screw speed max: 480 / 480 / 480 / 480 rpm Screw speed max current: 480 rpm Isdpfoyyzzvex Akpetn Injection rate: 37 / 54 / 149 / 104 cm³/s Injection rate increased: 28 / 40 / 98 / 77 cm³/s Specific injection pressure: 2200 / 2200 / 1451 / 1230 bar Specific injection pressure increased: bar Nozzle stroke: 380 mm Nozzle contact pressure: 40.7 kN Type: Multicomponent Drive: Hydraulic

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Itjdpfxjzcaxdj Akpsn Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Itodpsxbgrgefx Akpjn Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: used, Zwick Testing Machine Type: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions H x W x D: 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer, 13.5 mm MFA 25 extensometer (temperature range up to +200°C) Computer + testXpert II V3.5 software Climate chamber: Itjdezil Upspfx Akpon Airtemp LKG-K-TK-50 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, Binder   Type: MK 115 E3.1   Refrigerant: R404A (1.20 kg)   Binder Climate Chamber for Rapid Temperature Changes   Model MK 115, Article Number 9020-0175 The basis for reliable material testing MK series | for dynamic temperature profiles   The smart alternative to complex individual solutions for cyclic temperature tests: The MK series masters all heat and cold tests between –40°C and 180°C. It is characterized by precision and performance. The APT.line™ preheating chamber technology ensures natural simulation – and thus reliable test results.   Performance Features Electronically controlled APT.line™ preheating chamber technology MCS controller with program memory Adjustable ramp functions 1 port, Ø 50 mm (left, measured approx. 49.3 mm) Temperature selector, Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface 4 rollers (mobile, 2 lockable) Stainless steel interior with insert   Technical Data:   External dimensions: approx. 980 x 1725 x 865 mm (W x H x D)   Internal dimensions: approx. 600 x 480 x 400 mm (W x H x D)   Itodpfsy H Hvlex Akpon Internal volume: 115 liters Weight: approx. 260 kg   Temperature data: Temperature range: -40°C to +180°C Very rapid temperature changes (climate chamber operation)   Electrical data: Rated voltage: 400 V / 50 Hz Rated power: 3.5 kW Rated current: 11.0 A   Max. operating pressure: 29 bar   Condition: used optically and technically as shown in the pictures   Scope of supply: Binder MK 115 climate chamber incl. insert / interior equipment   For your safety as a buyer: Inspection possible by arrangement Loading with a forklift can be arranged   (Subject to changes and errors in technical data!)   We will be happy to answer any further questions by telephone or message.

Condition: used, Binder   Temperature Testing Cabinet MK 240 Type: MK240-400V   The Binder temperature testing cabinet from the MK series is designed for heat and cold tests in the range of -40 °C to +180 °C. The MK is particularly an efficient alternative to individual custom solutions, especially for cyclic temperature tests.   For sale is a Binder temperature testing cabinet MK 240 for use in industry, research, development and quality assurance.   Technical data:   Temperature range: -40 °C to +180 °C Spatial temperature deviation: 0.1 to 1.2 ± K (depending on the setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on the setpoint) Itsdpfx Akjy Nic Hjpjn Average heating rate: approx. 5.0 K/min (according to IEC 60068-3-5) Cooling time: from +180 °C to -40 °C approx. 110 minutes Average cooling rate: approx. 4.5 K/min   Internal volume: approx. 228 liters Maximum load per shelf: approx. 30 kg Maximum total load: approx. 70 kg   Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D)   External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D)   Feedthroughs: 2 x Ø 70 mm Number of doors: 1 Shelves: 2 (standard) / max. 6   Electrical data:   Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse rating: 16 A Phases: 3~   Weight: approx. 320 kg   Condition   Used Optical condition as shown in the pictures Normal storage and usage marks are present   Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates and manufacturer information.   Shipping is possible. Subject to changes, errors and prior sale.   We will gladly answer any further questions by telephone.

Condition: used, RS Simulators Type: KSS 600/75-10K RS Simulators climate chamber / environmental simulation chamber Prüf- und Messtechnik GmbH Model: KSS 600/75-10K water-cooled For sale is a professional climate test chamber / environmental simulation chamber for temperature tests, climate tests, material tests, aging tests, as well as industrial testing and measurement applications. Ijdpfey H Ib Aex Akpjtn The unit is in used condition and can be fully inspected according to the images. The control panel / display is present and shown in the images. Technical data Type: KSS 600/75-10K 600 liters Temperature range: -75 °C to +180 °C Temperature change rate: Cooling: 10 K/min Heating: 10 K/min Test chamber dimensions (W x D x H): 840 × 840 × 840 mm External dimensions (W x D x H): 1200 × 1600 × 1995 mm Voltage: 3 x 400 V / N / PE Current consumption: 55 A Weight: approx. 1400 kg Refrigerant according to nameplate: R404A – 6.0 kg R23 – 3.0 kg Equipment / Features RS Simulators control panel / operating panel Programmable operation possible Observation window in the door Test chamber with temperature monitoring Operating hour counter Side access / connection possibility Robust industrial design Heavy-duty design with an approximate weight of 1400 kg Scope of supply RS Simulators climate chamber KSS 600/75-10K Scope of supply as shown in the images Condition & Notes Condition: used Inspection possible by arrangement. Loading can be arranged. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, Weiss Climate chamber / Temperature and humidity chamber Weiss WK3-340/70 Climate chamber Temperature range from -70 °C to +180 °C with humidity control Approx. 335 liters / 10 to 98 % RH / air-cooled For sale is a used climate chamber from the manufacturer Weiss Umwelttechnik GmbH. The climate chamber is suitable for temperature and humidity testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large observation window and lateral test specimen ports. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WK3-340/70 Device type: Climate chamber / Temperature and humidity chamber Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate cooling: approx. 3 K/min Temperature change rate heating: approx. 3 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Isdpfx Akoz A A T Hopetn Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.55 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 5.5 kW Rated current: 16 A Dimensions and weight: Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm External dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Weight: approx. 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Air-cooled design Stainless steel interior Large observation window Test chamber lighting Lateral test specimen ports Adjustable feet Program and manual operation Test specimen port right: DN 125 mm Test specimen port left: DN 50 mm Stainless steel inserts as shown in the pictures Areas of application: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Weiss WK3-340/70 Climate chamber Touch panel control Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Type: VT 7011 Heraeus Vötsch Temperature Chamber, Air-Cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.8 kW, Rated current: 12 A For your safety as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Itedpfx Aoh Agt Sskpjn

Year of construction: 2003, condition: used, Temperature range: -60 to 130°C, the control system is defective, including documentation and wiring diagrams, on-site inspection is possible. Itjdsz R A Rcepfx Akpsn

Condition: used, Year of construction: 2021, operating hours: 733 h, JCB 8008 CTS mini excavator, manufactured in 2021, with only 733 operating hours! ----* Manufacturer: JCB * Model: 8008 CTS * Year of manufacture: 2021 * Recorded operating hours: approx. 733 * Operating weight: 950 kg * Includes 2 x buckets * Adjustable undercarriage * Good condition * Video available upon request (WhatsApp Erik) * Price: 9,500 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Isdez R Hzfspfx Akpstn All information is provided without guarantee. Errors and prior sale are subject to change.

Condition: excellent (used), Year of construction: 2011, operating hours: 80,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 40 mm, displacement volume: 201 cm³, total length: 5,245 mm, total width: 1,525 mm, total height: 2,300 mm, overall weight: 7,200 kg, input frequency: 50 Hz, input voltage: 400 V, The machine comes from the current series production of a plastics processor and, according to the previous owner, is fully functional. An inspection at the production facility is possible after scheduling an appointment. Key data (according to manufacturer's specifications ENGEL) • Clamping force 1,200 kN (120 t), tie-barless clamping unit • Platen dimensions 790 × 790 mm (Wide Platen), minimum tool size 350 × 350 mm • Tool installation height min. 400 mm, opening stroke 506 mm, max. platen distance 900 mm • Ejector 130 mm stroke, 39.8 kN • Injection unit 1 (330H, horizontal): screw Ø 40 mm, displacement volume 201 cm³, specific injection pressure 1,221 bar / increased 1,667 bar • Injection unit 2 (80W, angled position): displacement volume 38 cm³ (screw Ø 22 mm) or 49 cm³ (Ø 25 mm) [CHECK 09/25: which screw] • Hydraulics: pump drive 30 kW, oil capacity 300 l • Connection 3 × 400 V, 50 Hz, 139 kW / 220 A • Control system ENGEL CC 200 [CHECK 09/25] • Operating hours 87,300 h (as of 09/2026); plasticizing cylinder Ø 40 mm from 2021 with 20,300 h (according to the previous owner) Itsdpjz Eimfofx Akpsn Your advantages • Tie-barless: The tool space is free from tie bars. Large and bulky tools with core pulls can be accommodated, for which a larger clamping force class would often be required in tie-bar machines. • Short setup times: Tools are installed from the side without tie-bar removal. • Automation: Robots travel horizontally into the tool space – smaller cell, lower hall height, shorter cycles. • Tool-friendly: Platen parallelism via the patented ENGEL Flex-Link system (according to the manufacturer). • Hydraulic connections for core pulls, parallel movements programmable (according to the previous owner) – for tools with sliders, undercuts and thread cores. • Combi version with space for a rotary table or indexing plate (according to the manufacturer). • Main injection unit with a newer plasticizing cylinder (2021). • Second injection unit, according to the previous owner, was not used in operation, therefore minimal wear. [CHECK 09/25: unit available + free injection test] Typical applications 2K hard/soft and two-color: handles with TPE zone, housings with molded-in seal, switches and operating elements, connectors with seal, rollers with soft tread, closures with sealing lip, cable glands, medical components, two-color design parts. Single-component: technical precision parts and parts with inserts. Scope of supply • Injection molding machine as described [CHECK 09/25: with both injection units] • ENGEL data sheet, layout plan, platen drawing Not included in the scope of supply: the peripherals visible in the photos (removal/automation with protective enclosure, temperature control units, material handling and drying, mobile switch cabinet) and tools. Terms and conditions • Price on request • Available presumably from week 48/2026 • Payment 100% advance payment • Transport throughout Europe on request Note: The technical specifications are based on the manufacturer's documentation and the information provided by the previous owner. They are for informational purposes only and do not constitute an agreement on the condition or a warranty within the meaning of §§ 434, 443 BGB. We will confirm individual values during the inspection or upon request. Offer subject to change, prior sale reserved.