Used Cosmotec Cooling Device for sale (17,874)

Condition: used, • Type: DSH2/12V • Suction cup type: 150K • Year of manufacture: 2013 • Serial number: 84 Blsdeywi Dmjpfx Aqtei • Lifting capacity: 900 kg vertically/horizontally • Lifting capacity per suction cup: 150 kg vertically/horizontally • Can rotate and tilt • Includes battery for independent operation on construction sites

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range, horizontal X = 100 mm Measuring range, vertical Z = 50 mm Travel range, column Z2 = 350 mm Tilt +/- 45° Dimensions (W, D, H) 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Includes PC system Blodpfx Aszhuigoqtsi Includes cross table 218-001 Includes rotary vise 2028-003 Further data can be found in the brochure (PDF).

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Bjdpfx Aqowiwnqjtjli Including cutter

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original. Blsdpjyvrvpsfx Aqtei

Condition: good (used), Year of construction: 2002, Screw compressor, water-cooled, manufactured by BOGE, type: SO150, year of manufacture: 2002. Final compression pressure: 10 bar, motor power: 110 kW. Includes refrigerant dryer. Dimensions: Length 3.5 m, width 1.5 m, height 1.7 m, weight approximately 3200 kg. Bjdpjh Hi Inefx Aqtoli Documentation available.

Condition: used, functionality: unexamined, Self-propelled oil skimming device for removing oil from still and flowing bodies of water. Diameter approximately 1,250 mm Capacity up to 400 l/min. Bljdpfx Aozbt Icjqtei

Condition: like new (used), Year of construction: 2024, load capacity: 6,000 kg, workpiece weight (max.): 6,000 kg, Stierli- ROTATOR 600 / 6 to 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Blodpsgqgb Ujfx Aqtji Adjustment of working height: Steplessly adjustable The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 20 kg, total width: 1,160 mm, total length: 1,160 mm, For sale is a high-quality Motan material distribution station (6x6) for the central supply of materials in plastics processing. The system has a robust design and is intended for continuous industrial use. The use of hardened steel profiles makes the material distribution station particularly wear-resistant and ideally suited for abrasive plastics. Bledozcvgwopfx Aqtsi Thanks to its compact design on a pallet, it is easy to transport and can be quickly put into operation.

Condition: good (used), Min/max width : 20 - 220 mm Bjdpfxezdzk Ao Aqtoli Max length : endless Engine size : 4 Kw Configuration : 2 x steel infeed wheels + steel infeed chain. 1 x 1500 mm rollers

Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. Bljdpsy Eyzfefx Aqtji The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Brinkmann Pumps, coolant pump from Matsuura MC 710V milling machine -Type: TB13/110-B6X -Power: 0.4 kW -Flow rate: 12 l/min -Dimensions: see photos Bodpfsy Tuvmox Aqteli -Dimensions: 175/155/H330 mm -Weight: 8 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Shibaura, Coolant pump from Matsuura MC 710V milling machine Blodpfogx Amrsx Aqtsi -Type: OPSI-180W -Power: 180 W -Flow rate: 39/53 l/min -Bolt circle: Ø 160 x 10 mm -Dimensions: 200/270/H370 mm -Weight: 13.3 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 Bljdpfx Ajhu Hw Aoqtoi -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm -Dimensions: 320/190/H480 mm -Weight: 12.8 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump Blodpfjv Iyl Rjx Aqtsi -Coolant pump: Coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Overall dimensions: 500/340/H880 mm -Weight: 74 kg

Condition: good (used), Centrifugal pump, water pump, submersible pump Bledpfxofunxvs Aqtoi -Manufacturer: Schmalenberger, submersible pump type ZB 40-18 -Flow rate: 27 m³/h -max. H: 5 m -Engine power: 1.45 kW -Speed: 2870 rpm -Pipe connection: see pictures -Dimensions: 300/300/H705 mm -Weight: 34 kg

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h Bjdohtryxepfx Aqtoli -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: good (used), Year of construction: 2020, operating hours: 994 h, Drivetrain Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg Lift height: 3.000 cm CE mark: yes Condition Technical condition: good Bjdezg Ahhjpfx Aqtsli Visual appearance: good Other information TÜV Marked: yes Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H): 9,35 m / 2,36 m / 2,54 m Additional information Please contact Tobias Mayr for more information

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump Bljdpjy Tkazjfx Aqtsi -Type: MTH4-40/4 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 4 m³/h -Max. delivery head: 36.9 m -Immersion depth: 200 mm -Dimensions: 230/180/H435 mm -Weight: 14.9 kg

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h Bledpfjy Ti I Rox Aqtoi -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Used equipment – in very good condition Kugelmann Articulating snowplow blade Type: B140/67 Blade height (H): 67cm Blade width (W): 140cm Clearing width at maximum inclination (W2): approx. 123cm Year of manufacture: 2020 Price upon request Subject to changes, typing errors, mistakes and prior sale. All information is provided without warranty. The sale is made with the exclusion of any warranty or guarantee. Bljdpfx Aqjzdt Nwjtji

Condition: used, Year of construction: 2012, volume capacity 60 l/mim engine output 2 kW turning speeds 2850 U/min feed pressure 9 bar Dimensions (LxWxH) 2400x1060x560 mm Bsdpfx Aowa Umxoqtjli Total Dimension 2400x1250x1200 mm empty weight 280 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 19-1134P, Year of construction: 2020, operating hours: 4 h, load capacity: 1,500 kg, lifting height: 3,300 mm, mast type: duplex, gearing type: hydrostat, battery voltage: 24 V, Equipment: CE marking, clamp, gripper hydraulics, Manufacturer: APE Engineering GmbH Type: Universal Pallet Truck UHW 1500-27/E-Tele-SO Year: 2020 Voltage: 24V Lifting height: approx. 3300 mm (center of rotary device) Load capacity: 1500 kg Operating hours: 4 h (readout) This unit is designed for use on level ground for lifting, transporting, gripping, and rotating crucibles. Crucibles can be picked up and swiveled. Equipment: - 360° hydraulic rotary device - Initial lift approx. 100 mm - Hydraulic clamping device - Integrated 230V charger - 24V tray battery from Hawker Scope of delivery: - Universal pallet truck - Complete documentation including circuit diagrams and EC Declaration of Conformity Dimensions: Width: approx. 1650 mm Height: approx. 2300 mm Length: approx. 1950 mm without attachment and approx. 2400 mm with attachment The machine can be demonstrated on site. Bsdpew Izrcsfx Aqteli All information subject to change. Intermediate sale reserved. The item is sold without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller, nor to any injury to life, limb, or health.

Condition: used, Year of construction: 2015, functionality: fully functional, High-precision strip feeder manufactured by Zehnder & Sommer, Germany, designed for accurate and reliable feeding of metal strip in stamping, punching, and forming applications. This feeder is ideal for integration with high-speed presses such as Bruderer, Schaal, Mabu, Bihler, and similar machines. Zehnder & Sommer feeders are known for their exceptional Swiss engineering, compact design, and excellent feeding accuracy, making them suitable for demanding industrial environments and high-speed production lines. Technical Specifications Manufacturer: Zehnder & Sommer Model: EVD 220 DG S Strip width max.: 200 mm Roll opening (max strip thickness): 4.0 mm Maximum material cross-section: 50 mm² Feed length range: 0 – 19,999 mm Feed accuracy: ± 0.1 mm Maximum feeding speed: 150 m/min Pulling force: 70 N Weight: 10 kg High precision feeding for stamping and forming applications Compact and lightweight industrial design Suitable for high-speed press automation Bledpfxjzav Rdj Aqtoi Reliable swiss manufacturing quality Easy integration into existing production lines Ideal for fine stamping, electrical components, and precision metal parts production

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, lye device Lye Aqualung with salt container and caustic drain valve, 4-spring technology Stainless steel stand Bsdpfx Asdlp Rxoqteli incl. Travel with storage and locking rollers suitable for sheet metal size 580 x 780 mm, 4 or 5 rows Dimensions in mm: 700 x 902 x 880 WxDxH

Condition: excellent (used), Year of construction: 2012, Vaccum Lifting Device COVAL VAC 12 FH Year of construction: 2012 Maxi loading capacity: 80 KG Suction cups diameter: Ø 150 mm Maxi spacing: 910 mm Mini spacing: 350 mm In very good condition Voltage: 380 V Dimensions (L x W x H): 1100 mm Depth: 900 mm Total height on frame: 1000 mm Total weight with support: 100 KG Bsdpjzdidgsfx Aqtoli