Used Compensation Support for sale (14,041)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Underrun protection, foldable Half-shell mudguards Towing hook at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line Knodpfx Aoi Ri Nfjamoc EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only for basic tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. 2 clamping screws with lever locks on the side below. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation. Roll cover on one side for stowing on the right, with central locking on the left Country of registration/signs Germany With Dekra approval and certificate (according to §13 EG - FGV) Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support feet, black coated Body RAL, single color Roll cover RAL, single color Available in thermally insulated design!

Condition: new, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 2 axles, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Two-axle trailer Garden Trailer 264/2 KIPP Ksdpfx Ast I Rqmsamsnc We hereby offer the largest unbraked car trailer with transport area dimensions of 264x125 cm, with which you can transport large loads. The Garden Trailer 264/2 KIPP model is a trailer that makes all your transportation tasks easier. Do you want to transport a large amount of wood? No problem! New household appliances or electronics? Nothing could be easier! From now on, no task will be daunting. With your own trailer, you don't have to pay too much at the rental store and you don't have to rely on the goodwill of your friends and neighbors. You can transport everything you need yourself, and loading and unloading is made easier with an inclined drawbar. Technical parameters of the Garden Trailer 264/2 two-axle trailer CHASSIS - two unbraked axles from the renowned AL-KO or KNOTT company. Tiltable V-drawbar with a ball coupling. All-season 155/70 R13 tires, which compensate for uneven road surfaces and enable a comfortable ride with the trailer. The supporting frame is made of bent steel profiles, hot-dip galvanized, bolted together. BODY - floor made of high-quality, waterproof, non-slip plywood, 9 mm thick with dimensions of the transport area: 2640 mm long x 1250 mm wide. Overall dimensions of the trailer: 3541 mm long x 1690 mm wide x 1120 mm high (with frame and tarpaulin) SIDES - Total height 30 cm made of durable galvanized steel, corrosion-protected. Multiple bends for greater rigidity. With brackets for the tarpaulin rope for correct tensioning of the tarpaulin. The rear side wall can be opened and completely dismantled.

Condition: new, functionality: fully functional, fuel type: diesel, overall weight: 16,500 kg, Year of construction: 2026, Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Screen decks: 2 Screen angle: 14° Feed hopper capacity: 5 m³ Drive: diesel-hydraulic Discharge height, final discharge conveyor: 3,430 mm Discharge height, fine fraction discharge conveyor: 3,145 mm Discharge height, medium fraction conveyor: 3,145 mm Weight (without options): 16,500 kg Transport dimensions: 9,880 x 2,550 x 3,190 mm Throughput capacity: up to 200 t/h Screen box: 2,743 x 1,220 mm Proven quality. High throughput. Robust design. Worldwide support: service and spare parts support worldwide. Kjdoz Nhvuspfx Aamjnc

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width Knedpfx Aoq H Sqdsamjc From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2026, functionality: fully functional, ### Double Workstations for Maximum Industrial Efficiency The NANXING ND712DTL is a high-performance industrial solution designed for six-sided drilling of wood-based panels. By integrating two independent workstations into a single compact footprint, this machine effectively doubles production efficiency while minimizing the required floor space. It is the ideal choice for high-volume furniture manufacturers looking for speed, precision, and reliability. ###Key Advantages & Technologies Dual Station Productivity: Features two independent workstations ( mm) with separate industrial computers and processing units, allowing for the simultaneous processing of two panels. Comprehensive 6-Sided Processing: Capable of drilling and routing on all six sides of a panel in a single cycle, eliminating manual handling errors. High-Rigidity Structure: The integrated machine body undergoes stress-relief tempering, vibration aging, and sandblasting to ensure long-term operational stability and precision. Advanced Control System: Powered by the SYNTEC CNC system and operating on Windows 10, delivering a processing speed that is 20%-25% faster than standard systems. Precision Engineering: The monolithic frame is manufactured in a single process using Japanese SNK equipment to guarantee high-precision alignment. Kjdpfx Aasygr T Uomenc ### Technical Specifications Panel Dimensions Length: 250 - 2,800 mm; Width: 250 - 650/1200 mm; Thickness: 10 - 60 mm | | Drilling Configuration | Top: 4 units (194 vertical); Bottom: 2 units (92 vertical) | | Main Spindles | 2 x 5.5 kW (ER25) + 2 x 3.5 kW (ISO30), max 18,000 rpm | | Max Travel Speed | X/U Axes: 135 m/min; Y Axis: 75 m/min; Z Axis: 30 m/min | | Tool Magazine | 8+8 position automatic tool changer for top electromandrels | | Total Power / Weight | 52.36 kW / 7,850 kg | ### Standard Features & Smart Functionalities Intelligent Panel Detection: Equipped with X-axis length detectors and Y-axis width compensation to ensure correct panel loading and prevent processing errors. Specialty Hardware Support: Configured with specialized aggregates for Lamello grooves and "invisible" hardware connectors. Automatic Scanning: Integrated dual scanners ensure rapid reading of barcodes, even on long panels, to increase workflow automation. Surface Protection: Outfeed tables feature brushes and conveyor belts to protect delicate finished surfaces during movement. Enhanced Safety: A comprehensive safety fence with light barriers and safety doors ensures total operator protection. ### About the Manufacturer NANXING Machinery, established in 1996 and listed on the Shenzhen Stock Exchange, is a global leader in intelligent furniture manufacturing solutions. Known for innovative technology and meticulous quality control, Nanxing machines are certified to international CE standards.

Condition: ready for operation (used), Year of construction: 2004, total height: 2,730 mm, product length (max.): 1,470 mm, CMM machine manufactured in 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both X and Y axes, and 600 mm in Z. It includes advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we have for sale. Contact us for further details. • Accuracy: MPEE = 1.9 µm + 4·L/1000 (with Renishaw TP200 probe) • Temperature compensation: Automatic temperature compensation (temperature sensor) • Controller: UC200H (including scanning card) Additional equipment • Probe head: Motorised Renishaw PH10M (7.5°), PHC10-3 head controller, PI200 interface • Probing system: Renishaw TP200 with 3× TP200 STD force modules • Probe changer: Renishaw SCR200 with 6 parking positions Kodpfx Aeyhgbpoamonc • Stylus set: Basic stylus set (5 pcs) • Calibration equipment: Ceramic calibration sphere Ø 20 mm • Software: MCOSMOS v4.3 with CAD option; active modules: GEOPAK, CAT1000S, IGES, STEP, STATPAK, Scanning Probes, Laser Probe Support, Export Status Information • Computer system: Industrial PC with Windows 10 operating system

Condition: new, Massive Cast Iron Legs for Lathe / Workbench – NEW & Extremely Sturdy For sale are 2 heavy-duty, high-quality cast iron legs, the perfect base for lathes, workbenches, or other machinery. The solid construction ensures maximum stability and minimal vibrations – ideal for precision work. With their robust cast design, these legs are virtually indestructible and suitable for professional use. Condition: - New & in original packaging - Unused, including accessories (see photo) Technical data: - Weight: 31 kg per leg - Height: 80 cm - Width (bottom): 50 cm - Width (top): 25 cm - Thickness (bottom): 10 cm - Thickness (top): 15 cm Features: - Adjustable leveling feet included → perfect compensation on uneven floors - Threaded holes on top incl. mounting bolts - Sturdy, well-designed construction with bracing for extra rigidity - Highly adaptable: simply mount a wooden board or machine table if desired Ideal for: Kjdpfx Aeyzd Ineamjnc - Lathes - Heavy machinery - Workbench projects - DIY or industrial-style furniture Shipping / Collection: - Collection preferred - Shipping via freight forwarding available The legs are located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: cast feet, machine base, lathe stand, workbench legs, industrial feet, machine feet, cast frame, workbench subframe, heavy-duty supports, metal feet

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 11,000 kg, workpiece weight (max.): 11,000 kg, feed rate X-axis: 600 m/min, feed rate Y-axis: 200 m/min, spindle motor power: 11,000 W, product height (max.): 455 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 200×3200 – 200 T – MTP-3212 – 4 AXES X,Y1,Y2,R+V The brand-new MTP 200×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its heavy-duty welded frame, advanced CNC control system, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup for both single-part and high-volume manufacturing. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system (Germany) • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2530 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 11,000 kg TECHNICAL SUPPORT Knodpfjzg Ebwox Aamoc We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES Y1, Y2, X + V Knedpfozg H Ewsx Aamec The brand-new MTP 125×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 6 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 6 mm • Pressing force: 125 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 7,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 10.8 kW (14.68 HP), pressing force: 130 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 160 mm/s, table length: 3,200 mm, throat depth: 400 mm, distance table to ram: 480 mm, clearance between the columns: 2,600 mm, total length: 3,700 mm, total width: 1,515 mm, total height: 2,630 mm, overall weight: 8,120 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, documentation/manual, safety light barrier, SENFENG BDE13032 CNC Press Brake – 3200 mm × 130 Tons The SENFENG BDE13032 is a CNC press brake designed for precise, stable, and efficient sheet metal bending. With a working length of 3200 mm and a pressing force of 130 tons, it is suitable for metal fabrication companies, sheet metal processors, mechanical engineering, switchgear manufacturing, enclosure production, construction machinery, and general industrial bending applications. The machine is equipped with the DELEM DA66S CNC control system. It supports 2D touch-graphic programming, 3D product simulation, a 24-inch color display, a USB interface, and optional Industry 4.0/OPC-UA connectivity. This allows even complex bending tasks to be programmed efficiently and produced with high repeatability. Key technical data: • Model: SENFENG BDE13032 • Press force: 1300 kN / 130 tons • Working length: 3200 mm • Frame distance: 2600 mm • Stroke: 400 mm • Upper beam stroke: 200 mm • Open height: 480 mm • Dimensions: approx. 3700 × 1515 × 2630 mm • Machine weight: approx. 8120 kg • Main servo motor: 10.8 kW • X-axis travel: 480 mm • X-axis speed: 400 mm/s • X-axis accuracy: ±0.02 mm • R-axis speed: 200 mm/s • R-axis accuracy: ±0.05 mm Bending capacity at 3200 mm bending length: • Carbon steel: up to 4.5 mm • Stainless steel: up to 3 mm • Aluminum: up to 7 mm Bending accuracy: • Angular accuracy over the entire length: ±30′ • Straightness accuracy over the entire length: ±0.15 mm • Dimensional accuracy of the bending length: ±0.15 mm The machine bed is made of Q235B steel and offers high toughness, impact resistance, and long-term stability. The integrated tongue-and-groove welded structure increases welding strength and reduces the risk of deformation. The frame and upper beam are precisely machined as a unit to reduce positioning errors and ensure stable bending performance over long periods of use. The CNC-controlled compensation table compensates for the deflection of the upper and lower beams during the bending process. The CNC system calculates the necessary compensation based on the bending load and automatically adjusts the wedges. This ensures that the bending angle remains constant over the entire sheet metal length. Main configuration: • DELEM DA66S CNC control • REXROTH hydraulic control Knedpfx Ajzhgltoamec • HYTEK oil pump • SCHNEIDER main electrical system • HIWIN drive components • SKF cylinder seals • SENTEK / GIVI magnetic scale • CNC-controlled deflection compensation • European standard upper and lower tooling • LED lighting in the work area • Adjustable front sheet support with linear guide Optional equipment includes a DSP safety light curtain, a WILA New Standard clamping system, VERA hydraulic clamps, double-sided quick clamps, and smart factory LAN connectivity. Depending on the configuration and market version, the series has SGS and other relevant certifications. SENFENG Germany offers professional consulting, installation, commissioning, training, and after-sales service. The BDE13032 is a reliable solution for companies seeking precise bending, a stable machine structure, modern CNC control, and long-term production efficiency.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Ksdsza Aiyjpfx Aamsnc Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min Knjdpfx Ajzfbu Reamoc with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, *Save on Transport Costs! Up to three platform trailers can be delivered as a space-saving 3-unit stack. Simply assemble the front wall yourself after delivery and benefit from significantly reduced transport costs. *Customized Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is an example. Production and equipment are tailored individually to customer specifications. #Chassis High-strength steel welded chassis Fifth wheel with replaceable 2" kingpin Angled outer frame with Load-Lock profile for easy strap attachment 24 t two-speed landing gear, single-side operation, semi-round feet with load compensation Approx. 1,930 mm rear swing clearance Rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Galvanized rear underrun protection Quarter fenders in front of and behind axle assembly Anti-spray mud flaps (EC compliant) Rear impact protection 2 spare wheel carriers incl. mounting kit 1 spare wheel with steel rim Lockable plastic toolbox #Axles & Suspension BPW disc brake axles (430 mm) Laser-aligned axle and suspension system for reduced tyre wear and fuel consumption Air suspension Automatic lift axle with forced lowering and traction aid (activated by pressing the brake pedal 3 times) #Braking System Dual-line air brake system Colour-coded air lines for easier servicing Spring parking brake 2 interchangeable air couplings at front (without connecting lines) EBS electronic braking system with front EBS socket Raise/lower valve Vehicle Stability System (RSS) Knsdpfjzmtc Asx Aamec Suitable only for tractors equipped with ABS #Tyres 385/65 R22.5 tyres Steel rims, factory silver #Electrical System 24 V lighting system Multi-chamber rear lights LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front sockets (without connecting cables) #Loading Platform Approx. 30 mm phenolic plywood floor 8 longitudinal support beams Forklift axle load up to 7,900 kg Steel chequer plate reinforcement at rear #Front Wall Approx. 1,350 mm aluminium front wall Heavy-duty steel corner posts Front curtain release system Crash Blocker with integrated steel impact protection #Registration & Certificates German registration EC type approval (2007/46/EC) 24/7 service hotline Optional delivery as a secured 3-unit transport stack Fliegl body strength certificate according to EN 12642 XL ECE R70 rear warning plate

Condition: used, Thermo Fisher Scientific KingFisher FLEX Magnetic Particle Processor 4 units available Manufacturer: Thermo Fisher Scientific Model: KingFisher FLEX Equipment Type: Automated Magnetic Particle Processor / Nucleic Acid Purification System Kedoz I S D Sjpfx Aamonc Application: Automated DNA/RNA purification and sample preparation Description: The Thermo Fisher Scientific KingFisher FLEX is an automated magnetic particle processing system designed for high-throughput purification and sample preparation. The KingFisher FLEX uses magnetic bead technology to automate the processing of biological samples, providing consistent and reproducible purification of DNA, RNA, proteins and other biological targets. It is widely used in molecular biology, genomics, biotechnology, pharmaceutical research and clinical laboratory environments. The system is particularly suited to laboratories looking to automate repetitive sample preparation and purification workflows while reducing manual handling and improving throughput. Key Features: Automated magnetic bead-based sample processing Designed for high-throughput laboratory workflows Suitable for DNA and RNA purification Can be used for protein and other biomolecule purification applications Programmable automated processing protocols Consistent and reproducible sample preparation Suitable for research, biotechnology and pharmaceutical laboratories Multiple plate formats supported depending on configuration User-friendly automated operation Compact laboratory footprint Typical Applications: DNA purification RNA purification Nucleic acid extraction PCR sample preparation Genomics and molecular biology Next-generation sequencing workflows Protein purification Pharmaceutical research Biotechnology research High-throughput sample preparation Removed from pharma plant in Cork, IE. Devices are in very good condition. Sold as seen ----- Keywords: Thermo Fisher, Thermo Scientific, KingFisher FLEX, King Fisher Flex, KingFisher Flex Purification System, magnetic particle processor, magnetic bead processor, DNA extraction, RNA extraction, DNA purification, RNA purification, nucleic acid extraction, sample preparation, automated sample preparation, molecular biology, genomics, biotechnology, pharmaceutical laboratory, laboratory automation, PCR preparation, NGS, next generation sequencing, protein purification, research laboratory equipment, scientific equipment, lab equipment.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 480 mm, rotor width: 2,000 mm, power: 150 kW (203.94 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Genox K2000 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. Twin 75kW drive motors (2 x 55kW & 2 x 110kW dual drive options also available) with heavy duty oversized gearbox, 80rpm shaft speed as standard. 2000mm wide x 480mm diameter Rotor with 95pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic, fast acting swing type ram force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Ksdpsz Hyxnofx Aamsnc Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor width: 2,200 mm, type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Genox BH2200 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 180kW combined motor power (150kW & 220kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2200mm wide x 650mm diameter Rotor with 95+6 pcs, 40mm Concave reversible alloy steel blades. 60mm blades are also available. Hydraulic force feeding of material according to motor loading and timers. Kedpfx Aaez Hyyxemsnc Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle.

Condition: new, Year of construction: 2026, functionality: fully functional, rotor diameter: 650 mm, rotor length: 2,800 mm, power: 220 kW (299.12 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, warranty duration: 12 months, Equipment: rotational speed infinitely variable, Genox BH2800 Series - Heavy Duty Single Shaft Shredder suitable for processing various materials including plastics, wood, rubber, paper, copper cable etc. 220kW combined motor power (180kW & 264kW options also available) with heavy duty oversized gearboxes, 80rpm shaft speed as standard. 2800mm wide x 650mm diameter rotor with 125 pcs, 40mm concave, reversible high quality heat treated alloy steel blades. 60mm blades are also available as an option. Knsdpsz Hy Agefx Aamec Hydraulic force feeding of material according to motor loading and timers. Parameters can be easily configured on site to suit the materials being processed. Output size is controlled by replaceable screens mounted beneath the rotor shaft in hydraulic operated screen support cradle. Standard screen size is 40mm, other sizes can be provided on request.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Kedpsz Imc Nsfx Aamjnc Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Knodoz Arh Aepfx Aamec Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Kodpfx Aasz Dugnjmsnc Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 506925, functionality: fully functional, operating hours: 261 h, power: 5.5 kW (7.48 HP), planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, rotational speed (max.): 5,000 rpm, overall weight: 1,260 kg, Offering a used MARTIN thickness planer, model T45. Sale due to restructuring of the company. General Technical Specifications: Planing width: 630 mm Maximum planing depth: 12 mm Planing height: 2.8 - 300 mm Minimum workpiece length: 270 mm Kedpfx Aaszwpvajmenc Weight: approx. 1,200 kg Table length: 1260 mm Speed: 5000 rpm Thickness table extension 630 x 450 mm, foldable Year of manufacture: 2011 5.5 kW (7.5 hp); maximum planing width 630 mm The machine provides first-class results in planing operations. Operation: 1-axis control for planing dimensions, maximum 99 values can be stored, Button for manual quick and fine adjustment of the planing thickness according to the digital display, Push buttons for starting and stopping the cutterhead, Cutterhead: TERSA full-steel cutterhead Z4 D=125 mm; including locking mechanism for easy cutter replacement Groove for accommodating planing cutters. Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles, preventing tipping, table surface finely planed. Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers D=85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. Extraction: High-swiveling, split hood with chip extraction connection D=160 mm, Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease nipples. The machine is still connected and can be tested. Price is quoted plus VAT.

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2600 mm Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Ksdjr Hby Hspfx Aamjnc Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Knjdpovkw Dvsfx Aamjc Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Maximum height 350 mm Turning length 1000 mm Maximum turning diameter over bed 600 mm Maximum turning diameter over cross slide 360 mm Spindle bore 107 mm Speed range 16 – 3150 rpm Feed rate range, longitudinal and transverse 0.5 – 5000 mm/min Rapid traverse rate, longitudinal and transverse 9 m/min Main drive 30 kW Machine dimensions with chip conveyor, L x W x H 5400 x 2200 x 2000 mm Ksdevr Eh Eopfx Aamonc Weight 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT screen General description: CNC manual data input control with program input via function and numeric keys. Input of all information in dialog with the screen. Integrated menu system and display of all functions in plain text. Control panel, screen and handwheel in a separate chip guard. The EPL control offers the following possibilities: Programs can be entered and modified with direct operator guidance via the EPL control without program-technical preparation. NC programs in ISO/EIA standard can be entered, output or entered manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, transverse and contour turning, also with allowance. Threads. Chamfer DIN 509 form E and F and DIN 76, also grinding allowance can be programmed. Axial and radial grooves according to DIN 471 and 472, also with bottom chamfer. Radii 90° and chamfers 45°. Automatic tool radius compensation for cycles, chamfer, groove, radius, chamfer. Programming: Sentence-oriented, metric/inch, diameter with absolute input, radius with incremental input, full circle programming, subprogram technique, masking levels for program parts. Zero point offset. Selection of operating modes via menu. Program input and output: In dialog via menu with operator guidance or directly in dialog • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, of which 6 positions are standard tool holders + 6 positions are driven tool holders • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (more on request) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, 1 brand new hydraulic swing-cut plate shear (unused showroom machine) Manufacturer: LAMI NOVA Model: SC 2006 Max. cutting length: 2100 mm Max. sheet thickness, for normal steel: 6.5 mm Max. sheet thickness, for stainless steel: 4 mm Cutting angle: 1.5° Overhang: 350 mm Cutting speed: 29 / min. Drive power: 7.5 kW Dimensions L x W x H: approx. 2670 x 2000 x 1600 mm Knedpfed Ad A Ejx Aamec Weight: 4500 kg Accessories / Special features: • NC control ELGO P 40 as an electronic positioning display for the motorized back gauge, length = approx. 800 mm, ball screw spindles • 1 heavy-duty angle stop with tilting cam, 1000 mm • 2 heavy-duty support arms • Large overhang of 350 mm for cutting longer sheet metal • Central shear gap adjustment • Cutting line illumination • Small, fixed cutting angle of 1.5° • Ball rollers in the table • Upper blade with 2 and lower blade with 4 cutting edges • Plastic feet for the clamping beam • Electric foot switch • Sheet metal slide at the rear • Oil filling • Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL • Electrical system by SIEMENS, TELEMECANIQUE • Operating manual • CE compliant Delivery time: immediately, subject to prior sale plus additional freight costs China - Germany Exclusive representation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel